Related
i installed a custom rom to the Galaxy S2 everything was working fine booted up and everything.. But then i try to put a Original Kernel File back to the phone to get rid of the Yellow explanation mark in the boot screen then i went into Recovery and cleared the usual Davik cache, cleared file permissions ect. But then when i rebooted it i got a black screen it was'nt coming back on, so i took out the battery ect and still nothing on screen!! i cant even get into recovery mode or anything its completely dead.. i've even left out the battery put batt back in but still nothing.. i stheir a way i can revive this phone?? Cheers.. PLEASE HELP... :crying:
Did you try to reset the phone to factory setting?
Sent from my GT-I9100 using xda premium
gs2rom said:
Did you try to reset the phone to factory setting?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I'm unable to do anything with it now! no power NOTHING. My batt was nearly full when it went off so i know its not the batt and even when i put cable in with batt in it still does'nt show anything on screen..
aviz06 said:
i installed a custom rom to the Galaxy S2 everything was working fine booted up and everything.. But then i try to put a Original Kernel File back to the phone to get rid of the Yellow explanation mark in the boot screen then i went into Recovery and cleared the usual Davik cache, cleared file permissions ect. But then when i rebooted it i got a black screen it was'nt coming back on, so i took out the battery ect and still nothing on screen!! i cant even get into recovery mode or anything its completely dead.. i've even left out the battery put batt back in but still nothing.. i stheir a way i can revive this phone?? Cheers.. PLEASE HELP... :crying:
Click to expand...
Click to collapse
What's your ROM details?
Swyped from my Samsung Galaxy SII
Jokesy said:
What's your ROM details?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
I Updated to this rom >>GT-I9100 Resurrection Remix JB v3.0.4[16/08][AOKP JB PRE](AROMA+OTA) <<
Could you doing wipe?
Sorry for my english
Envoyer depuis mon S2 avec tapatalk
---------- Post added at 09:13 PM ---------- Previous post was at 09:08 PM ----------
Could you doing wipe?
After installing and before reboot i think you must do 3 wipes for this ROM.
Sorry for my english
Envoyer depuis mon S2 avec tapatalk
aviz06 said:
I Updated to this rom >>GT-I9100 Resurrection Remix JB v3.0.4[16/08][AOKP JB PRE](AROMA+OTA) <<
Click to expand...
Click to collapse
from which ROM?
With what kernel?
Swyped from my Samsung Galaxy SII
try download mode..
or pressing volume down and connecting it to pc at the same time.. (you´ll end up in download mode or your phone is pretty dead)
Jokesy said:
from which ROM?
With what kernel?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
from a stock rom with Kernel_I9100XWLPT insecure then i wrote the custom rom and then put the original kernel back on to get rid of the yellow exclamation mark rebooted then nothing!
aviz06 said:
from a stock rom with Kernel_I9100XWLPT insecure then i wrote the custom rom and then put the original kernel back on to get rid of the yellow exclamation mark rebooted then nothing!
Click to expand...
Click to collapse
That was the problem.
Your kernel has brick bug, it's being said 1 million times but you did not read it or ask questions before messing around with your device.
I'm afraid your device may be hard bricked.
I'm sorry.
Let's see what can be done.
If you can get to download mode with combined buttons or usb jig then visit this thread: forum.xda-developers.com/showthread.php?t=1841099
Swyped from my Samsung Galaxy SII
Jokesy said:
That was the problem.
Your kernel has brick bug, it's being said 1 million times but you did not read it or ask questions before messing around with toot device.
I'm afraid your device may be hard bricked.
I'm sorry.
Let's see what can be done.
If you can get to download mode with combined buttons or usb jig then visit this thread: forum.xda-developers.com/showthread.php?t=1841099
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
ok m8 thanks for the info, but because the phone is only 4mths old i have requested a service repair with samsung so im gonna send it off tomoz to get sorted.. is their a way samsung can find out if i been messing with it or will they just flash with stock firmware anyways once they can get it to boot? or will they just replace the board? Thanks. Mick.
aviz06 said:
ok m8 thanks for the info, but because the phone is only 4mths old i have requested a service repair with samsung so im gonna send it off tomoz to get sorted.. is their a way samsung can find out if i been messing with it or will they just flash with stock firmware anyways once they can get it to boot? or will they just replace the board? Thanks. Mick.
Click to expand...
Click to collapse
If it's hard bricked there is nothing us users can do to get the phone back but I'd imagine it wouldn't be too hard for Samsung to realize what you've done
Good luck :good:
UrbanDesigns said:
If it's hard bricked there is nothing us users can do to get the phone back but I'd imagine it wouldn't be too hard for Samsung to realize what you've done
Good luck :good:
Click to expand...
Click to collapse
Hopefully they should repair.. Thats the only option i have left.. Stupid me i only just bought it as well!
i'll keep u updated and let u know if it was repaired? i here a few peeps get similar probs when trying to update to custom firmware's and samsung do repair and send them back to their customers..:fingers-crossed:
I hope you will have your phone working again dude, and I want to ask a question to Jokesy, is there a brickbug or something bad about XWLP7 ? Because if I turn back to stock rooted SGS2 , i will use XWLP7.
teror300 said:
I hope you will have your phone working again dude, and I want to ask a question to Jokesy, is there a brickbug or something bad about XWLP7 ? Because if I turn back to stock rooted SGS2 , i will use XWLP7.
Click to expand...
Click to collapse
No, there is no brick bug on XWLP7
Jokesy said:
No, there is no brick bug on XWLP7
Click to expand...
Click to collapse
Oh ok, Thanks for answer.
teror300 said:
Oh ok, Thanks for answer.
Click to expand...
Click to collapse
You are welcome
just an update on my BRICKED phone, i got it back today from samsung repair center all working as normal now and back to life! Thankyou Samsung!! :highfive:
Now were/what is the best way to root my S2 without doing this again? or is it best just to leave it as is?..
aviz06 said:
just an update on my BRICKED phone, i got it back today from samsung repair center all working as normal now and back to life! Thankyou Samsung!! :highfive:
Now were/what is the best way to root my S2 without doing this again? or is it best just to leave it as is?..
Click to expand...
Click to collapse
And people say Samsung has a bad customer service, Samsung FTW
The easiest way to Root your phone is probably the Chainfire Root, which you can find here:
http://forum.xda-developers.com/showthread.php?t=1103399
It`s very important that you read the instructions there on how to Root your phone.
It´s a great method because it gives you Root and Clockworkmod in one package and you will keep your stock Kernel.
After that you can install any Rom or Kernel you want but it`s highly recomended to not install any Kernel with the Hard Brick Bug. Read this thread for more information:
http://forum.xda-developers.com/showthread.php?t=1756242
If you really want to remove the triangle there is a mod from chainfire, called TriangleAway: http://forum.xda-developers.com/showthread.php?t=1494114
but I would recommend not to do it, since people also managed to screw that up (bricking their phone), I mean is it really so disturbing to see the Triangle for 2 seconds everytime you reboot?
Good Luck
PLEASE Help i cant turn on my samsung after rooting it ( its my dads and he would get really angry if he would get out that i messed up his phone guys please help :crying:, i was rooting my phone with odin, and after a while i thought it crashed so i turned my phone off, and after that i cant turn it on again!
I cant do anything there is just a black screen
guys plase help!!!
kristofer_gvenetadze said:
PLEASE Help i cant turn on my samsung after rooting it ( its my dads and he would get really angry if he would get out that i messed up his phone guys please help :crying:, i was rooting my phone with odin, and after a while i thought it crashed so i turned my phone off, and after that i cant turn it on again!
I cant do anything there is just a black screen
guys plase help!!!
Click to expand...
Click to collapse
Sorry about that.
Please provide answers to the following questions:
1. What's the model no. Of your galaxy SII?
2. What were you trying to flash too gain root access? please provide the link to where you find it.
3. Can you still get to download mode?
Swyped from my Samsung Galaxy SII
Replyy
Jokesy said:
Sorry about that.
Please provide answers to the following questions:
1. What's the model no. Of your galaxy SII?
2. What were you trying to flash too gain root access? please provide the link to where you find it.
3. Can you still get to download mode?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
my model number is GT-I9100, nothing happens when i push the power button, nor then i connect it to a charger.
kristofer_gvenetadze said:
my model number is GT-I9100, nothing happens when i push the power button, nor then i connect it to a charger.
Click to expand...
Click to collapse
What about other answers?
Swyped from my Samsung Galaxy SII
Reply
Jokesy said:
What about other answers?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
it is an outside link i cant post it here ( it s called "Android 2.3.6 JVU + Root"
JVU is for i9000 not 9100.
You have bricked this phone by flashing inproper firmware with bootloader dedicated for olde model.
i9.0.1.3k galaxy imperator
Can you get into recovery or download mode.Take out the battery for 5 minutes and/or charge the phone for a bit and retry.
ps. your fathers not going to be happy
Sent from my GT-I9100 using xda premium
Reply
theunderling said:
Can you get into recovery or download mode.Take out the battery for 5 minutes and/or charge the phone for a bit and retry.
ps. your fathers not going to be happy
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i cant turn it on nothing happens when i push the power button as i said, so No download mode no recovery mode for me.
Thx
SirKunon said:
JVU is for i9000 not 9100.
You have bricked this phone by flashing inproper firmware with bootloader dedicated for olde model.
i9.0.1.3k galaxy imperator
Click to expand...
Click to collapse
Thx for letting me know, but what should i do now, i cant turn it even on, nothing happens when i push the power button
kristofer_gvenetadze said:
Thx for letting me know, but what should i do now, i cant turn it even on, nothing happens when i push the power button
Click to expand...
Click to collapse
Plead ignorance and send it in for warranty repair. I hard bricked my SGS2 last week and it was repaired under warranty, no questions asked. If the repairers can't turn it on they can't tell you voided the warranty and they will just replace the motherboard. In Australia it takes 5 -10 working days.
If it is out of warranty there is a place in the US that claims to be able to repair a hard bricked SGS2, google is your friend.
Additional Info
kapioonda said:
Plead ignorance and send it in for warranty repair. I hard bricked my SGS2 last week and it was repaired under warranty, no questions asked. If the repairers can't turn it on they can't tell you voided the warranty and they will just replace the motherboard. In Australia it takes 5 -10 working days.
If it is out of warranty there is a place in the US that claims to be able to repair a hard bricked SGS2, google is your friend.
Click to expand...
Click to collapse
Isn´t there any other way solving this problem cuz currently i am in Georgia and there is no Samsung Center?
Search for jtag in your country... That will fix a hard brick
Sent from my SGH-I897 using Tapatalk 2
spagman72 said:
Search for jtag in your country... That will fix a hard brick
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
is that someonekind of a programm?
sry i am new to rooting android phones
kristofer_gvenetadze said:
is that someonekind of a programm?
sry i am new to rooting android phones
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1192853
I am seeking the pit file of e210k. Since my touchscreen is no response after I use triangle away to reset flash counter. Please help me to solve this problem. My s3 is vital for me!!!!!
jack0662 said:
I am seeking the pit file of e210k. Since my touchscreen is no response after I use triangle away to reset flash counter. Please help me to solve this problem. My s3 is vital for me!!!!!
Click to expand...
Click to collapse
One the Korean thread two try sammobile .com three Google .
jje
e210k
JJEgan said:
One the Korean thread two try sammobile .com three Google .
jje
Click to expand...
Click to collapse
Do u have solution????
jack0662 said:
Do u have solution????
Click to expand...
Click to collapse
As posted if you cannot use Google Sammobile or Korean thread then no solution .
jje
jack0662 said:
I am seeking the pit file of e210k. Since my touchscreen is no response after I use triangle away to reset flash counter. Please help me to solve this problem. My s3 is vital for me!!!!!
Click to expand...
Click to collapse
i brick my touch 2 times
first in triangleaway 2.36 then send it to warranty n they replaced the whole screen.
second flashing wrong recovery (SHV-E250K = korean note 2) with my SHV-E210K s3, im confused here so my mistake. and send again for screen replacement.
its an issue with triangleaway with version 2.36 and up resetting it will result in hardware brick( touchscreen)so even u use pit file its no use. the only solution is to send it for warranty. but before sending it be sure to reset your counter by using usb otg and mouse to be able to navigate the screen and use triangleaway 2.26 to reset the counter.
here is the guide to reset your counter, this surely help you to claim warranty
http://forum.xda-developers.com/showthread.php?t=2145908&page=2
Can you enter download mode?
Sent from my GT-I9300 using xda premium
My s3 touchscreen has no reponse!
Nick Fury said:
Can you enter download mode?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I can go to download mode. But I am seeking the alternative method beside sent to warrntly.
As long as you can enter download mode then you can flash the stock official firmware through odin and it will sort your problem out my friend
Sent from my GT-I9300 using xda premium
Nick Fury said:
As long as you can enter download mode then you can flash the stock official firmware through odin and it will sort your problem out my friend
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
flashing it with triangle away 2.36 or flashing wrong kernel or recovery( note/note2 ) to your e210k s3 will definitely broke your touch hardware
others and i already tried that with no luck but you can try what he suggest to find out, unfortunately your hardware already died you dont have any option but to replace it by yourself or go to warranty.
Shall I take to to samsung??
chris151722 said:
i brick my touch 2 times
first in triangleaway 2.36 then send it to warranty n they replaced the whole screen.
second flashing wrong recovery (SHV-E250K = korean note 2) with my SHV-E210K s3, im confused here so my mistake. and send again for screen replacement.
its an issue with triangleaway with version 2.36 and up resetting it will result in hardware brick( touchscreen)so even u use pit file its no use. the only solution is to send it for warranty. but before sending it be sure to reset your counter by using usb otg and mouse to be able to navigate the screen and use triangleaway 2.26 to reset the counter.
here is the guide to reset your counter, this surely help you to claim warranty
http://forum.xda-developers.com/showthread.php?t=2145908&page=2
Click to expand...
Click to collapse
Mine is korean version(Parallel import) and I am in Hong Kong! Can I take it to SAMSUNG (HK) to get further repair??
jack0662 said:
Mine is korean version(Parallel import) and I am in Hong Kong! Can I take it to SAMSUNG (HK) to get further repair??
Click to expand...
Click to collapse
i dont know maybe you call them first if your korean s3 is covered in your country or call the store where you bought your phone.
chris151722 said:
i dont know maybe you call them first if your korean s3 is covered in your country or call the store where you bought your phone.
Click to expand...
Click to collapse
No Samsung will only repair korean variants in korea.
Also, the touchscreen is pretty much done. The note2 kernel has a higher voltage for the touch controller and it's too high for the S3. iirc anyways.
The same thing happaned to Erica one of the XDA tv guys :3
xSpeced said:
No Samsung will only repair korean variants in korea.
Also, the touchscreen is pretty much done. The note2 kernel has a higher voltage for the touch controller and it's too high for the S3. iirc anyways.
The same thing happaned to Erica one of the XDA tv guys :3
Click to expand...
Click to collapse
yes i think you are right cos the size of the screen of note/2 is bigger compare to s3 thats why it needs higher voltage and this causes the failing of touch hardwares.
I got a good news! I take it to the seller they said they have two method to solve this problem. First is change the monitor but it expense ($1800HKD), another is change the bus of the LCD it cost 800HKD (100USD). Obviously, i choose second method!
Hi.
I have a S3 that is Virgin Australia.
I need to return this back to the original software and the bootrom too so they dont know it was changed to cm10.1 and they dont decline the warrenty on it.
can someone explain how to do this and where to get the files and restore the phone.
Thanks
Stuart
flash a stock rom from sammobile.com for your country.
-------------------------------------
please let me know if i'm wrong and CLICK thanks if i help
SRIRAM
sent from my GT-I9300 running CM10.1 RC5 by Temasek
stueee said:
Hi.
I have a S3 that is Virgin Australia.
I need to return this back to the original software and the bootrom too so they dont know it was changed to cm10.1 and they dont decline the warrenty on it.
can someone explain how to do this and where to get the files and restore the phone.
Thanks
Stuart
Click to expand...
Click to collapse
Read the return to stock for warranty post .
jje
Fixed. Sorry for inconvenience
ianneo said:
Hi guys. I have a Mega 6.3 which has a cracked screen. Since the glass wasn't working, I couldn't unlock (Password lock) it so rather stupidly, I wiped it through the recovery mode. Now it is bricked. I have sent it back to Indonesia to fix it and they say they can't, even if they flash the ROM. I suspect that the bootloader is bricked. Does anyone know what I can do? If I haven't given enough information, please reply and I will try to give as much information as I can. I am sorry if someone has asked the same question but I wasn't able to find a thread about this.
(My Mega is running 4.4.2 Stock ROM and KNOX is flagged and tripped)
Click to expand...
Click to collapse
have you tried odin using the correct firmware?
Thanks for trying to help but it lives. Thanks