Which files in the firmware.zip in the latest OTA are the HBOOT files?
warpurlgis said:
Which files in the firmware.zip in the latest OTA are the HBOOT files?
Click to expand...
Click to collapse
Inside the firmware.zip it's the only file thats not an img
"hboot_8x60-lte_2.27.0000_120803_MR2.signedbyaa.nb0"
I flashed the firmware and still remained S-OFF just needed to dev-unlock again.... Either way just remove that file and you can flash without risking S-OFF /unlock
also becareful with the boot.img (kernel) unless you are running the stock OTA
Tachi91 said:
Inside the firmware.zip it's the only file thats not an img
"hboot_8x60-lte_2.27.0000_120803_MR2.signedbyaa.nb0"
I flashed the firmware and still remained S-OFF just needed to dev-unlock again.... Either way just remove that file and you can flash without risking S-OFF /unlock
also becareful with the boot.img (kernel) unless you are running the stock OTA
Click to expand...
Click to collapse
Why would you need to unlock again if you are S-OFF?
Sent into the innertubes from my Arnova 10 G2.
hgoldner said:
Why would you need to unlock again if you are S-OFF?
Sent into the innertubes from my Arnova 10 G2.
Click to expand...
Click to collapse
Run fastboot commands would be the only reason I can think of.
mjones73 said:
Run fastboot commands would be the only reason I can think of.
Click to expand...
Click to collapse
Yeah I don't care if it says unlocked I love me some fast boot commands
If you are s-off you dont need to re unlock. I cant believe as many ti.es as this has been covered people still worry/do this.
Sent from my ADR6425LVW using Tapatalk 2
is this an engineering hBoot?
Not that i know of. Just an hboot update
Sent from my ADR6425LVW using Tapatalk 2
apophis9283 said:
If you are s-off you dont need to re unlock. I cant believe as many ti.es as this has been covered people still worry/do this.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Yup, then if you want to use fastboot flash commands, you need to have the jb hboot as opposed to stock.:highfive:
apophis9283 said:
Not that i know of. Just an hboot update
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
thank you, ill wait for an eng version of it.
apophis9283 said:
If you are s-off you dont need to re unlock. I cant believe as many ti.es as this has been covered people still worry/do this.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Well if you install the newest hboot and need to run fastboot commands, you do need to unlock.
The Jbear 2.25 hboot works fine on this update if you need extended capabilities. I have flashed the jb2.25 and back to the stock 2.27, I made flashable zips for both stock 2.25 and the 2.27 hboots have flashed between them all on this Patch OTA.
Sent from my HTC Rezound / ADR6425LVW using Tapatalk v2.2.6
mjones73 said:
Well if you install the newest hboot and need to run fastboot commands, you do need to unlock.
Click to expand...
Click to collapse
No you don't. I've been running fastboot commands all the time and I'm still S-OFF and LOCKED. never re-unlocked my bootloader. It works fine.
a.mcdear said:
No you don't. I've been running fastboot commands all the time and I'm still S-OFF and LOCKED. never re-unlocked my bootloader. It works fine.
Click to expand...
Click to collapse
I stated you need to unlock if you install the latest 2.27 hboot and want to run fastboot commands. As I can see in your signature, you're on an engineering hboot, in that case you would not...
Related
I have a phone I need to send back and I'm honestly not sure how to do it.
Sent from my ADR6425LVW using xda premium
Are you on ICS & leaked firmware or just GB and unlocked? Can't help too much until you provide more detail.
Sent from my ADR6425LVW
i'm assuming he's on stock since he wants to return it to VZW as close as he can, but i could be wrong, he could be one step behind
Re lock phone and run the ruu twice
Sent from my Dinc... I mean Rezound
yojoe600 said:
Re lock phone and run the ruu twice
Sent from my Dinc... I mean Rezound
Click to expand...
Click to collapse
i'm on the same boat. i'm on stock GB but need stock recovery but can't get it. The RUU says waiting for bootloader when my phone is connected and then it exits. it can't run all the way through. any ideas?
jackpot08 said:
i'm on the same boat. i'm on stock GB but need stock recovery but can't get it. The RUU says waiting for bootloader when my phone is connected and then it exits. it can't run all the way through. any ideas?
Click to expand...
Click to collapse
Try just relocking your bootloader.
GrayTheWolf said:
Try just relocking your bootloader.
Click to expand...
Click to collapse
I'm already relocked :/
Sent from my ADR6425LVW using Tapatalk 2 Beta-5
jackpot08 said:
i'm on the same boat. i'm on stock GB but need stock recovery but can't get it. The RUU says waiting for bootloader when my phone is connected and then it exits. it can't run all the way through. any ideas?
Click to expand...
Click to collapse
Did you run the ruu from your phone ?
Sent from my Dinc... I mean Rezound
yojoe600 said:
Did you run the ruu from your phone ?
Sent from my Dinc... I mean Rezound
Click to expand...
Click to collapse
I ran the exe on my computer. My phone is in normally conected and it runs but then the setup says waiting for bootloader then it exits since it like can't find it
Sent from my ADR6425LVW using Tapatalk 2 Beta-5
everyone runs the ruu from the phone.. you have to turn it into a PHXXXIMG and flash in boot loader.. thats the problem i think... look for scotts guide to running the ruu
I'm completely stock and unlocked with amon ra recovery, where is the ruu/ how do I flash it? I've never flashed any of the ruus before.
Slacker101 said:
I'm completely stock and unlocked with amon ra recovery, where is the ruu/ how do I flash it? I've never flashed any of the ruus before.
Click to expand...
Click to collapse
go here and flash the last one after naming it the right phimg that our phones use... i cant rember it right now
http://goo.im/stock/vigor/ruu
Is there a command to unlock the bootloader with s-off without having to wipe all of my data and everything?
There is no need to unlock. S-off is all that you need. It can do anything.
Sent from my ADR6425LVW using Tapatalk 2
cdexsw said:
There is no need to unlock. S-off is all that you need. It can do anything.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
It actually would not let me flash recovery without having the bootloader unlocked again. It was disappointing and erased my data... grrr
cdexsw said:
There is no need to unlock. S-off is all that you need. It can do anything.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
You need root to get s-off. The only people who had root were people on the shipped rom when the phone came out. Every OTA since has not had root, let alone temp root that the shipped rom had. So you absolutely need HTC Dev unlock to get s-off, and yes if you havent done it yet, it will wipe the phone. Thems the breaks.
quepaso said:
You need root to get s-off. The only people who had root were people on the shipped rom when the phone came out. Every OTA since has not had root, let alone temp root that the shipped rom had. So you absolutely need HTC Dev unlock to get s-off, and yes if you havent done it yet, it will wipe the phone. Thems the breaks.
Click to expand...
Click to collapse
Not what I meant. I already had s-off and it relocked. It then would not allow me to install amon ra. I was asking if there was a different fastboot command to just change it to unlock now since we have soff.
Sent from my ADR6425LVW using xda premium
I had to unlock too but reused my token.
fastboot flash unlocktoken Unlock_code. is the command
Edit: My bad this probably isn't what you were looking for.
I didn't have to re-unlock.
I asked about this in the discussion thread but was never answered.
I just fastboot flash recovery .zip
and HBOOT flashed my roms boot.img and I was back with the addition of S-OFF
I've flashed several Roms since, while my HBOOT still says Tampered, Locked, S-OFF.
Finally, since I'm on ICS, I flashed the Juopunutbear modified HBOOT.
Everything seems to be open and working fine without re-unlocking.
Slacker101 said:
Is there a command to unlock the bootloader with s-off without having to wipe all of my data and everything?
Click to expand...
Click to collapse
Not sure if you still need this but i just used the rezound AIO to flash amon again right after and worked fine no unlock. Tho I still have my bin file if I need it.
afaik if you did s-off and you're on GB firmware, you need the ENG Hboot to flash recoveries using fastboot commands, otherwise you have to use PH98IMG.zip's... but that's just what i see, i'm not 100%.
I have a Rezound rooted and S-off. If I want to return completly to stock can I get S-on with this device?
tjamscad said:
I have a Rezound rooted and S-off. If I want to return completly to stock can I get S-on with this device?
Click to expand...
Click to collapse
yes you can. here is how to get s-on.
adb devices
adb reboot bootloader
fastboot devices
fastboot oem writesecureflag 3
fastboot reboot-bootloader
*verify you are locked s-on
fastboot reboot
(you will need to load a non engineering hboot before doing the steps above.)
synisterwolf said:
(you will need to load a non engineering hboot before doing the steps above.)
Click to expand...
Click to collapse
Yep, and as such, I highly recommend running the 3.14.605.12 RUU before doing those steps.
Also MAKE sure your not on an eng. Hboot when you turn s-on it would brick your phone.
sent from my s-off reZound rockin' viperRez Rom on global ICS firmware
synisterwolf said:
yes you can. here is how to get s-on.
adb devices
adb reboot bootloader
fastboot devices
fastboot oem writesecureflag 3
fastboot reboot-bootloader
*verify you are locked s-on
fastboot reboot
(you will need to load a non engineering hboot before doing the steps above.)
Click to expand...
Click to collapse
load a non engineering hboot? I'm not faliluar "non engineering hboot".
An engineering hboot allows extended fastboot commands while locked...you can only run them when you're s-off. Just flash the OTA RUU before you run those commands and you'll be fine. That will get everything back to stock, hboot included.
shrike1978 said:
Yep, and as such, I highly recommend running the 3.14.605.12 RUU before doing those steps.
Click to expand...
Click to collapse
shrike1978 said:
An engineering hboot allows extended fastboot commands while locked...you can only run them when you're s-off. Just flash the OTA RUU before you run those commands and you'll be fine. That will get everything back to stock, hboot included.
Click to expand...
Click to collapse
tjamscad said:
load a non engineering hboot? I'm not faliluar "non engineering hboot".
Click to expand...
Click to collapse
easiest way to get the non engineering hboot its to ruu. that way you can minimized the risk of bricking when going back to s-on.
what you should do is this:
back up your rom.
back up your internal sd card.
flash ruu -3.14.605.12-
do the steps for s-on
check to make sure you are s-on
then you will be at 100% factory out of the box phone.
*** please make sure you are at 80% or higher on battery life and have some free time. this might take up to an hour to do successfully. ***
shrike1978 said:
Yep, and as such, I highly recommend running the 3.14.605.12 RUU before doing those steps.
Click to expand...
Click to collapse
Why that RUU?
That's the one he suggested personally. Any fully stock ruu should be fine. Someone correct me if I'm wrong.
Sent from my ADR6425LVW using xda app-developers app
tjamscad said:
Why that RUU?
Click to expand...
Click to collapse
famouscollin said:
That's the one he suggested personally. Any fully stock ruu should be fine. Someone correct me if I'm wrong.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
The only reason I suggested that particular one is that it is the current OTA. Flash it, and you'll be at the "official" versions on your hboot and radios.
shrike1978 said:
The only reason I suggested that particular one is that it is the current OTA. Flash it, and you'll be at the "official" versions on your hboot and radios.
Click to expand...
Click to collapse
Great thanks, This is what I got from this thread. Correct?
1. Flash latest RUU for Rezound
2. *ADB required*
a. adb devices
b. adb reboot bootloader
c. fastboot devices
d. fastboot oem writesecureflag 3
e. fastboot reboot-bootloader
f. fastboot reboot (verify you are locked s-on)
Correct. Good luck
Sent from my ADR6425LVW using xda app-developers app
tjamscad said:
Great thanks, This is what I got from this thread. Correct?
1. Flash latest RUU for Rezound
2. *ADB required*
a. adb devices
b. adb reboot bootloader
c. fastboot devices
d. fastboot oem writesecureflag 3
e. fastboot reboot-bootloader
f. fastboot reboot (verify you are locked s-on)
Click to expand...
Click to collapse
This did loaded RUU and turned S-on but did not unlock. Tried this fastboot oem lock and that says "RELOCKED" not the same. It was worth a shot I guess.
While trying to reroot and get s-off I have managed to get things all jacked up. I am now S-on, Unlocked and Tampered. Is there a way out of this?
Anybody?
tjamscad said:
Anybody?
Click to expand...
Click to collapse
the ruu should have given you a stock locked hboot. try running it again with a locked/relocked bootloader..
famouscollin said:
the ruu should have given you a stock locked hboot. try running it again with a locked/relocked bootloader..
Click to expand...
Click to collapse
Thanks, this has not been going like planned. I think it is wunning out of space to give me warnings.
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/ name this to ph98img and flash in hboot. Your phone won't boot with the security warning. You have to run ruu.. this should help. It's the latest
Sent from my ADR6425LVW using xda app-developers app
famouscollin said:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/ name this to ph98img and flash in hboot. Your phone won't boot with the security warning. You have to run ruu.. this should help. It's the latest
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
can i use that to get s-off?
tjamscad said:
can i use that to get s-off?
Click to expand...
Click to collapse
Yes. You'll have to unlock, flash recovery (amonRa personally), flash supersu in recovery. Use the .5 ICS version of control bear
Sent from my ADR6425LVW using xda app-developers app
famouscollin said:
Yes. You'll have to unlock, flash recovery (amonRa personally), flash supersu in recovery. Use the .5 ICS version of control bear
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Sent you a Gtalk, this is not working out for me
Hi guys. As the title says, I may have bricked my rezound. I had rooted my phone using Hasoon2000's All-In-One-Kit to root. After successfully rooting, I used Hasoon2000's S-Off Toolkit. That's where the problem occurred. I may not have read the directions closely enough, but now, I always get stuck at the JuopunutBear screen. This screen only has the icon image. There are no options or settings to choose from. I can still access bootloader and flash Amon Ra recovery. From there, I have tried restoring a Nand backup I had made before. But even after I restore the backup and reboot, I still end up at the JuopunutBear screen.
I hope that someone, anyone will be able to help me out. Thanks in advance.
You need to flash your boot.IMG again
Sent from my ADR6425LVW using Xparent ICS Tapatalk 2
pwned3 said:
You need to flash your boot.IMG again
Sent from my ADR6425LVW using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Sadly, that did not solve the problem. Nothing has changed. When I reboot, it still shows the HTC screen twice, then goes to JuopunutBear screen.
Just FIY, I used the command: fastboot flash recovery rezound-recovery.img
Can you get into Recovery? Sorry, just re-read the OP and it looks like you can. Here's what I would try next: In Recovery, wipe everything and then flash the RUU back to plain jane stock. If that doesn't work my guess is that you'll have to try to get back to S-on.
Good luck!
rfarrah said:
Can you get into Recovery?
Click to expand...
Click to collapse
Yep. That's one thing I can still do. I have Amon Ra 3.14 running.
You need to flash your boot.img again. Not your recovery. Pull the boot.img from the Rom you are on and fastboot flash it
Sent from my ADR6425LVW using Xparent ICS Tapatalk 2
rfarrah said:
Can you get into Recovery? Sorry, just re-read the OP and it looks like you can. Here's what I would try next: In Recovery, wipe everything and then flash the RUU back to plain jane stock. If that doesn't work my guess is that you'll have to try to get back to S-on.
Good luck!
Click to expand...
Click to collapse
I'm downloading RUU right now. I'll try it as soon as it finishes.
pwned3 said:
You need to flash your boot.img again. Not your recovery. Pull the boot.img from the Rom you are on and fastboot flash it
Sent from my ADR6425LVW using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Uhhhh boot.img? I have the rezound-recovery.img, but no boot.img
controlbear -r
rfarrah said:
Can you get into Recovery? Sorry, just re-read the OP and it looks like you can. Here's what I would try next: In Recovery, wipe everything and then flash the RUU back to plain jane stock. If that doesn't work my guess is that you'll have to try to get back to S-on.
Good luck!
Click to expand...
Click to collapse
I tried flashing the RUU by going to bootloader (it searched for the zip file and did it automatically), but nothing has changed. Any ideas?
Oh btw, not sure if this well help, but my phone currently says:
TAMPERED
UNLOCKED
S-ON
if you've flashed a stock RUU, you need to relock as well. Go into fastboot and run "fastboot oem lock"
If that doesn't fix it (^what Shrike said ^), go to your sd card and delete the PH98IMG.zip file. Then after you re-lock, flash the RUU in recovery, not bootloader (although you may get taken there after it installs a new PHIMG file), just to be sure.
shrike1978 said:
if you've flashed a stock RUU, you need to relock as well. Go into fastboot and run "fastboot oem lock"
Click to expand...
Click to collapse
rfarrah said:
If that doesn't fix it (^what Shrike said ^), go to your sd card and delete the PH98IMG.zip file. Then after you re-lock, flash the RUU in recovery, not bootloader (although you may get taken there after it installs a new PHIMG file), just to be sure.
Click to expand...
Click to collapse
Ok guys. Trying it now. It's taking LONG, so maybe that's a good thing? I'll keep my fingers crossed.
Worked! Thank you!!!!
brianyoung said:
Ok guys. Trying it now. It's taking LONG, so maybe that's a good thing? I'll keep my fingers crossed.
Click to expand...
Click to collapse
IT WORKED GUYS! What a great way to celebrate Thanksgiving Eve I guess. Thank you everyone. I think I'll use my phone as is for now.
brianyoung said:
IT WORKED GUYS! What a great way to celebrate Thanksgiving Eve I guess. Thank you everyone. I think I'll use my phone as is for now.
Click to expand...
Click to collapse
AWESOME! Congrats!
brianyoung said:
I tried flashing the RUU by going to bootloader (it searched for the zip file and did it automatically), but nothing has changed. Any ideas?
Oh btw, not sure if this well help, but my phone currently says:
TAMPERED
UNLOCKED
S-ON
Click to expand...
Click to collapse
You didn't successfully s off. Try again later on now that you know the procedure to recovery.
But I will say this, keep it unlocked and on 2.25 hboot and 1.22 radios. With that setup you are near unbrickable and also have the OTA firmware.
Just takes you a couple extra steps to flash a rom.
Sent from my ADR6425LVW using Xparent ICS Tapatalk 2
Snuzzo said:
You didn't successfully s off. Try again later on now that you know the procedure to recovery.
But I will say this, keep it unlocked and on 2.25 hboot and 1.22 radios. With that setup you are near unbrickable and also have the OTA firmware.
Just takes you a couple extra steps to flash a rom.
Sent from my ADR6425LVW using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Do you mean rather than going s-off? And not going to the global RUU?
feralicious said:
Do you mean rather than going s-off? And not going to the global RUU?
Click to expand...
Click to collapse
I was about to ask too but i assume hes saying that s on is near unbrickable.
Sent from my Rezound using xda app-developers app
feralicious said:
Do you mean rather than going s-off? And not going to the global RUU?
Click to expand...
Click to collapse
Correct. Yes Jon. Only way to brick an s on is to pull power while flashing hboot or flash a bad hboot update.
Sent from my ADR6425LVW using Xparent Green Tapatalk 2
Will someone point out which is the file has the most current radios please?
I currently have hboot 2.27 and am s-on.
I have 2.22.10.0001r/2.22.10.0003r radios.
platinumthomas said:
Will someone point out which is the file has the most current radios please?
I currently have hboot 2.27 and am s-on.
I have 2.22.10.0001r/2.22.10.0003r radios.
Click to expand...
Click to collapse
The newest radios are from the global ota update 4.05.605.14_710RD
2.23.10.0123r/2.23.10.0124r
here is a link to the radio files
http://d-h.st/SMj
I'm not sure what I'm missing. I've ran the ph98img file with it unlocked and all it shows is parsing. I locked it and ran the ph98img, and it showed checking. But now, I've lost my Wifi radio and I've gotten a lot more random reboots and sleep of deaths.
platinumthomas said:
I'm not sure what I'm missing. I've ran the ph98img file with it unlocked and all it shows is parsing. I locked it and ran the ph98img, and it showed checking. But now, I've lost my Wifi radio and I've gotten a lot more random reboots and sleep of deaths.
Click to expand...
Click to collapse
Whatever rom you were using. Go back and flash that boot.img to that rom
Wifi is working again. But the radios didn't update.
Can I use fastboot to boot the radio.img file? Or will that mess up my phone?
platinumthomas said:
Wifi is working again. But the radios didn't update.
Can I use fastboot to boot the radio.img file? Or will that mess up my phone?
Click to expand...
Click to collapse
I don't think you can update radios only with s-on.
feralicious said:
I don't think you can update radios only with s-on.
Click to expand...
Click to collapse
there is an s-on method...rename the file in this link ahead and make sure it looks like this PH98IMG.zip after renaming it http://d-h.st/BIj ....this was originally posted by @Flyhalf205 flash it in the bootloader
REV3NT3CH said:
there is an s-on method...rename the file in this link ahead and make sure it looks like this PH98IMG.zip after renaming it http://d-h.st/BIj ....this was originally posted by @Flyhalf205 flash it in the bootloader
Click to expand...
Click to collapse
If I am s-off does this wipe anything?
Sent from my SCH-I605 using Tapatalk 4
Recovery and boot...you'll have to fastboot flash your recovery and then wipe dalvik cache and cache....I'm s-off and successfully did it
Sent from my P4R4N01D R3D D347H 4.3 using xda app-developers app
Sweet thanks
Sent from my SCH-I605 using Tapatalk 4