a friend of mine, try to root my Motorola Razar, but now my phone is stuck on the bootloader or something i am not sure, on the scrreen is printed this:
AP fast flash mode (flash failure)
OA.6c
Device is locked. Satus code: 0
u sound like ul need to get rsd lite and in the Android development section get hold of the correct Motorola rom u need to flash it.. there are tons of topics regarding these sort of problems.. unfortunately not at home to provide any relevant links but hope its a start!!
Sent from my XT910 using XDA
Gsm or cdma version?
Well either way, use this utility to flash back to stock, and reroot, make sure to only flash a rom that is for your phone ie. Gsm or cdma, and your area.
http://forum.xda-developers.com/showthread.php?t=1486718
Sent from my DROID RAZR using xda premium
Thanks Mate..
i will try to do it again..
if it fail again, i will contact in the thread again
describe exactly what happened
installed leak?
If it fails to rsd back you probably have been updated to ics, that being the case trying to rsd back to gingerbread will always fail. You will need to rsd to the .211 build. I'd use mats new tool possibly skip to the new 214 leak then use the same bundled tool for rooting. (given you are cdma) I must recommend a full charge for any flashing, a low battery can result in failed flash and also blows your batt stats to hell
Sent from my DROID RAZR using xda premium
Long story...But in short, I bricked my razr just before ICS was released, ripped the battery ribbon...Now after using Matt's 1.7 utility when I try to go into recovery I get an android lying on his back with his body opened and an exclamation point. I really need some help. Please.
Try to use RSD and flash in ICS. I dont know if u have CDMA or GSM razr but if u have GSM flash in this via rsd lite http://forum.xda-developers.com/showthread.php?t=1747800
Sorry, I know I should have said, I have a Verizon CDMA Razr.
ScorpiusO said:
Sorry, I know I should have said, I have a Verizon CDMA Razr.
Click to expand...
Click to collapse
Download matts utility 1.8.1 and choose option 1, the dead android you see is ics recovery. If press vol^and volume down when you see that it will allow you into recovery or ap fast. How did you brick did you try and side load ics from gb? You have ice recovery..
When that Android pops up just hold both volume button's at the same time to get recovery to show up
Sent from my DROID RAZR using xda premium
That fixed it. I didn't need to download 1.81. Thanks a bunch, it's going to be nice getting back to my Razr, I had to go back to my X while I was waiting.
Glad to see you fixed it,
first time i ran into that it took me a second to figure it out also
Sent from my DROID RAZR using xda premium
I can't get it to flash, gives me an error "Failed Flashing Process 1/11 flash cdt.bin "cdt.bin_si..." I had it rooted, uninstalled everything with the root, unrooted, wouldn't let me update to ICS, so I was just going to flash to stock and do it, and now this. I'm starting to panic a little, as I can't even get it to boot. I thought I had the right files, but now I'm not so sure. I have an XT912, it's a Vzw Razr, not the Maxx. I just want to go to stock GB, so I can go up to ICS. I had 2.3.6 update installed. I really need this phone for tomorrow, so any and all help is very much appreciated.
I'm using RSD Lite to flash this buy the way
My fastboot file is called "SPDREM_U_01.6.5.1-73_SPU-11-M1-2_SIGNEuropeAustraliaEMEA_USASPDRRTCEE_HWp2b_Service1FF_fastboot.xml"
Go to droidrzr.com under RAZR cdma and development section. Look for Matt's 1.7 utility and download and run the flash to stock. Make sure Motorola drivers are installed before flashing.
They are in the file when you unzip it.
Sent from my DROID RAZR using xda premium
bwheelies said:
Go to droidrzr.com under RAZR cdma and development section. Look for Matt's 1.7 utility and download and run the flash to stock. Make sure Motorola drivers are installed before flashing.
They are in the file when you unzip it.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Okay, thank you. Right now, I'm downloading the VRZ_XT912_6.51-73_DHD-11_TA-3_1FF_02.XML.zip files, to flash with the RSD lite utility. Will this do the same thing, or should I go with Matt's 1.7 utility instead?
Actually, this looks like the tool I used to root. Can I use his new 1.81 utility and just use the ICS Fastboot files, to go straight to ICS?
I have yet to get rsd-lite to fully flash to my phone. Matt's utility does work.
Not sure what gb version you are on, look to the earlier builds of the RAZR utility to install earlier builds.
Sent from my DROID RAZR using xda premium
bwheelies said:
I have yet to get rsd-lite to fully flash to my phone. Matt's utility does work.
Not sure what gb version you are on, look to the earlier builds of the RAZR utility to install earlier builds.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Yeah, I think I accidentally grabbed the EU version of the files, instead of the US version. Anyhow, I'm just flashing the ICS official files, as that was my goal anyhow. I figure if it doesn't work at this point, it's not like I'm really losing anything by trying. It's good to know that I'm not the only one that the RSD flasher has given issues though.
I installed the official ICS, and now it won't do anything. No screen, holding power does nothing, can't boot to safestrap, nothing. It booted once, had an android guy with some blue shape spinning, a progress bar filled up, and then it restarted. Went to the DUAL CORE TECHNOLOGY screen, then goes to black. Then nothing. Nothing. Absolutely nothing. I could cry. I figured out that if I hold the vol down and power, it'll restart, but just does the same thing. What am I doing wrong?? I don't understand it at all.
Have you used Matt's utility yet?
Sent from my DROID RAZR using xda premium
Is your battery dead?
bwheelies said:
Have you used Matt's utility yet?
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
I tried his 1.81 utility, no go. Someone on another site said they'd seen a similar case, and I need to use the 1.6 version, and then follow the update path from there. I'm downloading that right now.
My battery isn't dead yet, but I have no way of charging it (Going into BP Tools from the fastboot menu does me nothing), so it's just a matter of time. I really wish I could just go to bed, but I need this phone for my morning commute, as I'm really not familiar with the area.
You need gingerbread utility then ota if you want from there.
Sent from my DROID RAZR using xda premium
Yeah, after running the 1.6 utility it booted, and I'm now doing the OTA's to get to ICS. Thanks for all of the help, and I must also say that the folks over at droidrzr.com were incredibly helpful as well.
Thanks again
GibsonSGKing said:
Yeah, after running the 1.6 utility it booted, and I'm now doing the OTA's to get to ICS. Thanks for all of the help, and I must also say that the folks over at droidrzr.com were incredibly helpful as well.
Thanks again
Click to expand...
Click to collapse
I just want to know how people keep bricking there phone if there using the safestrap recovery?
GibsonSGKing said:
Yeah, after running the 1.6 utility it booted, and I'm now doing the OTA's to get to ICS. Thanks for all of the help, and I must also say that the folks over at droidrzr.com were incredibly helpful as well.
Thanks again
Click to expand...
Click to collapse
Hello,
It sounds like i'm having the same problem with my phone like you. But i'm not having a Verzion phone. Should this work also?
I need to restore .211 image for verizon 912 razr. No computer so matt utility is out and factory reset isnt getting it done.
Sent from my DROID RAZR using xda premium
Then you're outta luck dude
My Motorola Droid RazR XT910 lost IMEI and I'm trying to restore it with QPST (with this motod: http://forum.xda-developers.com/showthread.php?t=1960918), but QPST alway showing "No phone" (http://www.upnito.sk/imggal.php?viewImage=385197517f62c0e78cae468f7c1fa78e).
I'm trying to solve this problem for over a week and I do not know how to move on.
Sorry for my ENG
Do not try to do something to your phone which are for other devices except. The original Razr and Razr HD are completely different. I recommend you download the fastboot file for your region and flash it on RSD Lite
Sent from my GT-I9300 using xda app-developers app
TheMrcool212 said:
Do not try to do something to your phone which are for other devices except. The original Razr and Razr HD are completely different. I recommend you download the fastboot file for your region and flash it on RSD Lite
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
But flash of new system with RSD Lite doesn't help, I tried it several times already.
Sorry for my ENG
http://forum.xda-developers.com/showpost.php?p=37779063&postcount=45
Check this post from the thread I linked. It helps explain how to manually force the QC diagnostic device drivers to load in Windows.
That is your issue
Hit the thx button if i helped ya in anyways