lumia 800 - strange problem - Nokia Lumia 800

hello there!
i have a problem with this device.
i can't flash / unlock. all the drivers are ok, NSS PRO detects phone in normal mode, read all infos, but when choose OSBL mode, screen goes black, short vibrate and nothing happens after. phone is not detected anymore, but in device manager, there is "Qualcomm CDMA Technologies MSM" with an yellow exclamation mark. i tried this on 2 pcs WIN7, 2 laptops WIN7, 1pc WINXP. no luck. i even run ubuntu into a virtual machine. it displayed "Qualcomm CDMA Technologies MSM" , i done the connection, but the drive Qualcomm MMC does not appear in device utility.
NCSD Version: 1.9
SW Version: 1750.0805.8773.12220
HW Version: 112.1402.2.3
am i elligible to flash phone?

yes you are...
Follow this
http://forum.xda-developers.com/showthread.php?t=1669498

thank you for reply. i done that before opening thread. all drivers installed, but still no luck. phone goes in OSBL mode, but can't find any driver
PS: NSS can't detect phone as "nand disk" because of drivers, i guess.

lumia
if your phone doesnt come up as a flash disc then your not able to flash a custom rom regardless if it is detected as qualcomm msm, as i have found with few lumias i have had there seems to be a version of the boot loader which was just before nokia went to dload.
rob:good:

can i flash a custom rom with "traditional" softwares, like phoenix, jaf, ncs?

kaytar said:
thank you for reply. i done that before opening thread. all drivers installed, but still no luck. phone goes in OSBL mode, but can't find any driver
PS: NSS can't detect phone as "nand disk" because of drivers, i guess.
Click to expand...
Click to collapse
be sure you are running NSS as admin
good luck

Related

[Q] QDL win 7 64 bit Help

Streakdroid no longer has guides posted. Need help with qdl. Win7 64bit drivers wont load. Most posts refer to "extra steps" needed to install but none are showing the steps needed. Please help or post the guide please.
I am currently running 1.9.0 and have been having stability issues and issues installing .apk's
Would like to get the 2.2.2 rom rooted and working.
Check my post here:
http://forum.xda-developers.com/showthread.php?p=14669686#post14669686
still getting nothing. Have the phone in the mode where windows is identifying it as a Qualcomm CDMA Technologies MSM. I am in test mode as per your post. When I point windows to the drivers I just says none found.
QDLTool3rd_20101022_GAUSB1A130500 ;QDL Tool I have downloaded.
Runawaywill said:
still getting nothing. Have the phone in the mode where windows is identifying it as a Qualcomm CDMA Technologies MSM. I am in test mode as per your post. When I point windows to the drivers I just says none found.
QDLTool3rd_20101022_GAUSB1A130500 ;QDL Tool I have downloaded.
Click to expand...
Click to collapse
Assuming you know how to install new devices, plug your phone in and when system manager finds your device change it to:
Qualcomm HS-USB Diagnostics 9002 (in the qdl start page states the same, must have it list device light this for it to work)
If you don't have that get latest drivers from Dell's support web page. Let me know how it works out for you.
vanemburghj said:
Assuming you know how to install new devices, plug your phone in and when system manager finds your device change it to:
Qualcomm HS-USB Diagnostics 9002 (in the qdl start page states the same, must have it list device light this for it to work)
.
Click to expand...
Click to collapse
I don't know how to tell it what a device name is. If i just turn it on it says dell mini. Holding up and on gives me "Qualcomm CDMA Technologies MSM"
go to control panel, go to system, go to device manager, go to Ports (COM & LPT). For me my is associated with COM1, so assume the same for you, doing this from memory, if you have multiple go to each one right click select update driver software, click on browser browse my computer and hopefully you see dell mini or something to that effect.
Click on let me pick, uncheck show compatible hardware, scroll down to qualcomm, in the model box scroll down till you see Qualcomm HS-USB Diagnostics 9002. Click on next follow the steps from there.
Can't remember if I had to reboot or not, but anyways you need to go through the bcd edit steps if you returned your system to normal. Now start qdl tool, holding volume button connect your usb. Hopefully next to the word port in device section you see Qualcomm HS-USB Diagnostics 9002.
If you do run the tool. If not, since I am doing this from memory, you might need to search for the exact steps to get driver update to Qualcomm HS-USB Diagnostics 9002.
I'll rememeber this for later.
I thought you HAD to run QDL tool to flash stock rom again. I didn't realize it was more of an un-bricking tool.
Flashing stock recovery with fastboot now and going to install .pkg from there see how that goes.
Runawaywill said:
I'll rememeber this for later.
I thought you HAD to run QDL tool to flash stock rom again. I didn't realize it was more of an un-bricking tool.
Flashing stock recovery with fastboot now and going to install .pkg from there see how that goes.
Click to expand...
Click to collapse
simple to flash a rom, just do a Google search, can go from any stock rom to any stock rom in less than 10 minutes. Fastboot and Update.pkg are your friends

Need help using NSS software for 710

So whenever I try to use the nss software (i'm trying to simunlock my phone) I keep on getting:
Looking for phone...Done.
IMEI:
Changing phone mode...Done.
----------------------------------------------------------------------------
Looking for NAND disk...Not found.
Things to check:
1. Is the phone connected?(Plug to the USB)
2. Is it in the correct mode?(Try to switch to OSBL mode)
3. Have you installed the Qcom loader ?(Use the Install button)
I have the Qcom loader, but don't know why this errors showing? I've also installed all the drives etc...
I would really appreciate the help
Bump. Anyone?
I have the same problem! I am going to try to uninstall all the drivers I download and then re-install NCS. If that doesn't work, Im gonna plan an emotional funeral for my Lumia 800
monstercable said:
So whenever I try to use the nss software (i'm trying to simunlock my phone) I keep on getting:
Looking for phone...Done.
IMEI:
Changing phone mode...Done.
----------------------------------------------------------------------------
Looking for NAND disk...Not found.
Things to check:
1. Is the phone connected?(Plug to the USB)
2. Is it in the correct mode?(Try to switch to OSBL mode)
3. Have you installed the Qcom loader ?(Use the Install button)
I have the Qcom loader, but don't know why this errors showing? I've also installed all the drives etc...
I would really appreciate the help
Click to expand...
Click to collapse
Hi,
You start the phone in Normal Mode ? Is the phone with blank screen after install
or just restarts to Normal Mode ?
BR
You have intalled all drivers zune Nokia care suite Windows phone drivers etc?
Sent from my lumia 710 using XDA Windows Phone 7 App

MediaTek DA USB VCOM Port - Help me fix Code 10 problem

PLEASE! I need to load a new ROM into my MT6575 phone using Smart Phone Flash tool.
I've installed the Mediatek drivers on 4 different computers in my house (Vista, Window 7, Windows 7 64bit, Windows 8) and I cant get ANY of them to work!!
When I look under Ports (COM and LPT) in Device Manager, I ALWAYS get: This device cannot start. (Code 10)
WHAT is going on!! I've wasted so much time with this problem.
johnnysnavely said:
PLEASE! I need to load a new ROM into my MT6575 phone using Smart Phone Flash tool.
I've installed the Mediatek drivers on 4 different computers in my house (Vista, Window 7, Windows 7 64bit, Windows 8) and I cant get ANY of them to work!!
When I look under Ports (COM and LPT) in Device Manager, I ALWAYS get: This device cannot start. (Code 10)
WHAT is going on!! I've wasted so much time with this problem.
Click to expand...
Click to collapse
your not the only one with this problem i have it too with same mt6575 someone help please
Need to uninstall device and reinstall drivers
If you google, "Code 10", you will find that on a Windows system it is an error code generated by the Device Manager "because it can not start a device". In a nut shell, the most likely cause for this is because the device was not properly installed with the right drivers.
If you are running Windows, you can try to use the attached file called USBReview to see what device that is as you know it is your phone. Basically, with this program you can remove all the old drivers and start all the driver installation again.
Try to find your phone either here on xda, on the web or contact your phone's manufacturer - you need drivers!!!
Good luck, Mr. Phelps.
johnnysnavely said:
PLEASE! I need to load a new ROM into my MT6575 phone using Smart Phone Flash tool.
I've installed the Mediatek drivers on 4 different computers in my house (Vista, Window 7, Windows 7 64bit, Windows 8) and I cant get ANY of them to work!!
When I look under Ports (COM and LPT) in Device Manager, I ALWAYS get: This device cannot start. (Code 10)
WHAT is going on!! I've wasted so much time with this problem.
Click to expand...
Click to collapse
ronbo76 said:
If you google, "Code 10", you will find that on a Windows system it is an error code generated by the Device Manager "because it can not start a device". In a nut shell, the most likely cause for this is because the device was not properly installed with the right drivers.
If you are running Windows, you can try to use the attached file called USBReview to see what device that is as you know it is your phone. Basically, with this program you can remove all the old drivers and start all the driver installation again.
Try to find your phone either here on xda, on the web or contact your phone's manufacturer - you need drivers!!!
Good luck, Mr. Phelps.
Click to expand...
Click to collapse
Your USB program does give a lot of information I have never seen before, but I still haven't been able to figure out how to get the driver to load.
thanks, John
I'm having the same problem installing the MT6575 USB VCOM drivers. Is there a workaround to get this installed? I"m using WIN 6 64bit
johnnysnavely said:
PLEASE! I need to load a new ROM into my MT6575 phone using Smart Phone Flash tool.
I've installed the Mediatek drivers on 4 different computers in my house (Vista, Window 7, Windows 7 64bit, Windows 8) and I cant get ANY of them to work!!
When I look under Ports (COM and LPT) in Device Manager, I ALWAYS get: This device cannot start. (Code 10)
WHAT is going on!! I've wasted so much time with this problem.
Click to expand...
Click to collapse
This is what worked for me after lot of experimenting and searching:
- get MTK6575 drivers (for instance from Bruno Martins where he writes about flashing mtk6575 - google: MT6575 flashing tutorial bruno
- Start c/windows/system32/hdwwiz.exe (as admin)
- Click next
- Manually select hardware
- List all devices
- Select the driver (for example usb2ser_Win764.inf)
- from the List select "MediaTek Preloader USB VCOM Port"
(or you can install other drivers from the list if Preloader is not enough..)
On another computer I solved it by installing whole Android SDK, checked my android system and installed updated for SDK (approx. 2 GB) and it installed correct drivers automatically.
Also you can experiment with using another usb port..
Please write here if it helped.
ivy13 said:
This is what worked for me after lot of experimenting and searching:
- get MTK6575 drivers (for instance from Bruno Martins where he writes about flashing mtk6575 - google: MT6575 flashing tutorial bruno
- Start c/windows/system32/hdwwiz.exe (as admin)
- Click next
- Manually select hardware
- List all devices
- Select the driver (for example usb2ser_Win764.inf)
- from the List select "MediaTek Preloader USB VCOM Port"
(or you can install other drivers from the list if Preloader is not enough..)
On another computer I solved it by installing whole Android SDK, checked my android system and installed updated for SDK (approx. 2 GB) and it installed correct drivers automatically.
Also you can experiment with using another usb port..
Please write here if it helped.
Click to expand...
Click to collapse
Tried your first method but still get Code 10 error. Could not understand your second method. Please help. Me device is Qmobile Noir A2
hye.. any progress? am having the same issue.. just for MTK6575 com port driver
Just made my Amoi N820 work
So happy
You get Code 10 becouse your windows couldn't recognize the driver but that's irrelevant becouse flashing will work
No solution?
Any solution on this problem?
I've this china mt6575 galaxy s3 clone and got rooted using CF Root.Got ADB composite driver successfully installed in my pc (using win7 32-bit).When I install preloader usb vcom driver, i'm also facing this 'code 10' issue.Until now I can't install CWM in my phone.(the Flash Tool cannot detect my device).i try to install/push CWM using Terminal Emulator but nothing seems to change .when reboot into recovery mode the same stock recovery appear.Any help please?
orion~X said:
Any solution on this problem?
I've this china mt6575 galaxy s3 clone and got rooted using CF Root.Got ADB composite driver successfully installed in my pc (using win7 32-bit).When I install preloader usb vcom driver, i'm also facing this 'code 10' issue.Until now I can't install CWM in my phone.(the Flash Tool cannot detect my device).i try to install/push CWM using Terminal Emulator but nothing seems to change .when reboot into recovery mode the same stock recovery appear.Any help please?
Click to expand...
Click to collapse
i have thet problem to.
is ther solution?
I HAVE SOLUTION FOR THIS PROBLEM!!
Just ignore the error Code 10! Start the SPFlashtool and load the scatterfile, click on download and connect your switch off Phone with the computer. It will work fine.
Having the Same Problem
I understand I can ignore it and it works on that part, however I'm trying to root my phone now and it's not recognising that I have attached a device to the computer. Please need help to solve the problem. Have the drivers but can't get it without code 10
Hi.
me test for me not work.
iphone 4s.
plz help me.
hihi2u2 said:
I understand I can ignore it and it works on that part, however I'm trying to root my phone now and it's not recognising that I have attached a device to the computer. Please need help to solve the problem. Have the drivers but can't get it without code 10
Click to expand...
Click to collapse
Did you ever get this problem solved as I have the same issue with an MTK 6592 chip based phone?
I have the same problem too.
Installation of Media Tek preloaded drivers gives me Code 10 error.
Has anyone found the solution?
my phone is totally dead without power now after I tried to flash with SP Flash tool using correct ROM. I noticed in device manager that there is a CODE 10 error in mediatek preloader usb driver.. is this the culprit? my phone can no longer be detected now in SPFlash or MTK Droid tools... so hopeless... this is a brandnew phone I bought to be given as gift to my cousin...
I did it! I did it! I did it!
The solution is... we need not MediaTek USB VCOM (Android) (USB\VID_0BB4&PID_0005&MI_02), but PreLoader USB VCOM Port (USB\Vid_0e8d&Pid_2000) !
I have MTK6582 (KingSing S2), the host - WinXPx64.
It looks like my phone (and, maybe, other MTK devices too) have several engineering modes.
I have spent several hours trying to get working VID_0BB4&PID_0005&MI_02, which is exposed, if device is turned on while holding VOL- pressed. In this mode some strange factory mode with nonfunctional menu items is displayed on the screen. But to activate mode with Vid_0e8d&Pid_2000 some trickery is necessary.
Sometimes this USB interface starts repeatedly to appear and disappear every half-second in infinitive loop. I had such situation once, when connected turned off phone to USB cable with battery removed.
I just literally catched MT65xx Preloader by double clicking on it in windows device manager and pressing "install drivers" in it's properties. I have used Driver_Auto_Installer_v1.1236.00\SmartPhoneDriver\x64\Infs\usbvcom.inf from http://spflashtool.com/download/Driver_Auto_Installer_v1.1236.00.zip. DriverVer = 12/24/2011, 2.0000.0.0
After clicking "Read Back" in Flash Tool this insane loop stopped and program started to function as intended.
This interface could also appear once and for very short moment, if turned off phone (with battery inserted) is just connected to host. Also it could be seen again, if power button is pressed. If "Download" or "Read Back" is not pressed in advance in Flash Tool, than boot will continue after smaller than a second pause (if device is functional).
I don't know if running Install.bat (from archive I have given above) is necessary. It didn't installed driver when Vid_0e8d&Pid_2000 wasn't active, but, I guess, running it during short blinks would give the same effect.
Also, I don't know, if advice given in comment#6 in this thread four years ago would work. Maybe, the fault was in older version of driver (DriverVer=05/30/2011,1.1123.0).
Another reason could be that necessary USB interface disappears before windows manages to install driver for it for the first time. Possibly, only if "catched" in device manager, user could manually assign driver to it.
I've been struggling with my UMI Rome for days. It has/had the black screen problem, sometimes won't enter recovery mode, sometimes wouldn't allow charge, sometimes works just fine (yesterday). Last night i mistakenly cut off power during a battery recharge. -- today it has all the above problems (bricked) so I am trying doing a flashing again using the tutorials and tools on the Tehnotone.com site. Sintetix's reply above helps me at least have a better clue on what is going on. Wish me luck! BTW, I am using a Dell Windows 10 pc. (Results to be reported here.)
Sintetix said:
The solution is... we need not MediaTek USB VCOM (Android) (USB\VID_0BB4&PID_0005&MI_02), but PreLoader USB VCOM Port (USB\Vid_0e8d&Pid_2000) !
I have MTK6582 (KingSing S2), the host - WinXPx64.
It looks like my phone (and, maybe, other MTK devices too) have several engineering modes.
I have spent several hours trying to get working VID_0BB4&PID_0005&MI_02, which is exposed, if device is turned on while holding VOL- pressed. In this mode some strange factory mode with nonfunctional menu items is displayed on the screen. But to activate mode with Vid_0e8d&Pid_2000 some trickery is necessary.
Sometimes this USB interface starts repeatedly to appear and disappear every half-second in infinitive loop. I had such situation once, when connected turned off phone to USB cable with battery removed.
I just literally catched MT65xx Preloader by double clicking on it in windows device manager and pressing "install drivers" in it's properties. I have used Driver_Auto_Installer_v1.1236.00\SmartPhoneDriver\x64\Infs\usbvcom.inf from http://spflashtool.com/download/Driver_Auto_Installer_v1.1236.00.zip. DriverVer = 12/24/2011, 2.0000.0.0
After clicking "Read Back" in Flash Tool this insane loop stopped and program started to function as intended.
This interface could also appear once and for very short moment, if turned off phone (with battery inserted) is just connected to host. Also it could be seen again, if power button is pressed. If "Download" or "Read Back" is not pressed in advance in Flash Tool, than boot will continue after smaller than a second pause (if device is functional).
I don't know if running Install.bat (from archive I have given above) is necessary. It didn't installed driver when Vid_0e8d&Pid_2000 wasn't active, but, I guess, running it during short blinks would give the same effect.
Also, I don't know, if advice given in comment#6 in this thread four years ago would work. Maybe, the fault was in older version of driver (DriverVer=05/30/2011,1.1123.0).
Another reason could be that necessary USB interface disappears before windows manages to install driver for it for the first time. Possibly, only if "catched" in device manager, user could manually assign driver to it.
Click to expand...
Click to collapse
I tried what you said. It wouldn't install properly. It kept saying error (code 10) and showed in device management with a caution sign every time I installed the driver. I disabled the forced driver signature thingamabop but it still does it. I guess I'm screwed. Has anyone else fixed this?

Vodafone Smart Tab 4 - recover bootloader partiton?

Hi guys,
i have been searching the whole internet but i found no workable solution.
I have hard bricked my Vodafone Tablet Smart 4.
Current status:
- i put the charge cable into the tab, but nothing happens
- i can push any button, but nothing happens
I connected it with the computer and the computer recognized the tab as unknown device (yes, now i could install any driver, e.g. Qualcomm HS-USB QDLoader 9008) for 35 seconds (Debug Mode).
I have tested many possible software solutions (e.g. QcomDloader, Qualcomm Snapdragon Flash Tool, SP-Flash-Tool Version 3.*, 4.*, 5.*).
Now my question:
Is there any way to rewrite a new bootloader/ preloader partition on this tab? Or can i flash a new firmware directly to the Qualcomm CPU?
best regards
Olaf

Can someone help with windows 10 drivers for a Vizio XR6M10?

I've spent hours trying to find a working driver for a Vizio XR6m10 mini tablet. I can access it for files via USB on windows, but I'm trying to root it using and under device manager, it still shows "Android Device" with an exclamation point and problem. I've installed the Qualcom drivers multiple times, but no dice and it won't show up on a port in QFIL without the proper driver.
mlfc52 said:
I've spent hours trying to find a working driver for a Vizio XR6m10 mini tablet. I can access it for files via USB on windows, but I'm trying to root it using and under device manager, it still shows "Android Device" with an exclamation point and problem. I've installed the Qualcom drivers multiple times, but no dice and it won't show up on a port in QFIL without the proper driver.
Click to expand...
Click to collapse
Use
Qualcomm HS-USB QDloader 9008 driver for Windows
because without installing this Qualcomm USB Driver on your Windows PC, your PC won’t be able to detect your Android device.
jwoegerbauer said:
Use
because without installing this Qualcomm USB Driver on your Windows PC, your PC won’t be able to detect your Android device.
Click to expand...
Click to collapse
Thanks for the quick reply. I've tried that one multiple times by both downloading and doing the automatic install of those Qualcomm HS-USB QDloader 9008 driver for Windows and also extracting the zip version and using Device Manager. When I go to Device Manager, select update driver/Browse and point to the extracted folder where the drivers are, I just get "Windows could not find drivers for your device,
The device shows up in device manager as "Android" and there must be some kind of communication because I can open a command window in Platform tools and give the command "adb reboot bootloader" and the device will reboot into the bootloader with the little penguin icon on the screen.
I even installed the Android Studio and SDK tools and used the settings in there to install USB drivers and that doesn't work either.
jwoegerbauer said:
Use
Qualcomm HS-USB QDloader 9008 driver for Windows
because without installing this Qualcomm USB Driver on your Windows PC, your PC won’t be able to detect your Android device.
Click to expand...
Click to collapse
Okay, I sorta got the driver working. I had to put the tablet into EDL mode and id does now show up in Device manager and looking at the properties it shows the driver is indeed the QDloader 9008 driver and it now shows as COM 4. There is still an exclamation point on it, but that may be just because it says the driver is unsigned maybe? Anyway, it also shows up in QFIL as com 4, but I get an error communicating with Com 4 when trying to download, so it may be something else with the tablet.
Thanks for your help with the driver!

Categories

Resources