i am getting bootloop when i install cm7......tried various cm7 roms......i even flashed xwla4 gb firmware and then tried installing cm7....but it just doesnt boot.....ends in bootloop ......can anybody help
mysterio619 said:
i am getting bootloop when i install cm7......tried various cm7 roms......i even flashed xwla4 gb firmware and then tried installing cm7....but it just doesnt boot.....ends in bootloop ......can anybody help
Click to expand...
Click to collapse
list all the steps you took while flashing the Cm7.
Please provide your phone information too
Swyped from my Samsung Galaxy SII
mysterio619 said:
i am getting bootloop when i install cm7......tried various cm7 roms......i even flashed xwla4 gb firmware and then tried installing cm7....but it just doesnt boot.....ends in bootloop ......can anybody help
Click to expand...
Click to collapse
what version clockworkmod are you using to flash cm7
from i knowledge,may be this is a problem
try boot into recovery install zip from sdcard choose to install update cm7XXX secondary
Jokesy said:
list all the steps you took while flashing the Cm7.
Please provide your phone information too
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
flash siyah 2.6.13 through odin
installed zip from externalsd
flashed again siyah 2.6.13 CWM version
reboot recovery
flashed the zip again
reboot and it goes into bootloop
i tried two roms joyos and cm7.2 no luck
phone:galaxy s2 i9100
You need to wipe data/factory reset, wipe cache and Dalvik cache in Recovery! Have you ever flashed a rom?
Sent from my Galaxy S2 GT i9100
mysterio619 said:
flash siyah 2.6.13 through odin
installed zip from externalsd
flashed again siyah 2.6.13 CWM version
reboot recovery
flashed the zip again
reboot and it goes into bootloop
i tried two roms joyos and cm7.2 no luck
phone:galaxy s2 i9100
Click to expand...
Click to collapse
The reason for your problem is becausE you flashed Cm7 on your ICS phone.
Cm7 is for gingerbread, CM9 is for ICS while CM10 is for jelly bean.
If you want to flash any CYANOGENMOD, I recommend CM9 or CM10 since you are already in ICS.
Problem solved
Swyped from my Samsung Galaxy SII
flash siyah 2.6.13 through odin
installed zip from externalsd
flashed again siyah 2.6.13 CWM version
reboot recovery
flashed the zip again
reboot and it goes into bootloop
Click to expand...
Click to collapse
- Instal CM7 thru RECOVERY
- restart the phone and go to the RECOVERY again
- Do the FACTORY RESET, wipe cash/data
- restart the phone
I had the same problem when i was installing CM7 for the first time. Ended in bootloop. If Factory reset after instaling CM7 doesnt help, i recomend you to stay with CM9 stable
Related
Whenever i install a custom rom my sgs2 bootloops, it runs fine on the ones i flash with odin, but when i try to flash a custom rom it bootloops the i9100 screen and i can't even get into recovery, only download mode...
Name a ROM that's not flashing for you and list your install procedure.
Which other ROMs have you tried to install? What recovery do you currently have?
latest clockworkmod recovery...i reboot into it i wipe data and dalvick, then i install the rom and reboot(i am not a newbie) i have tried with cyanogenmod 7 and 9 , and some custom roms here in the forums...MIUI also...
vladtdr said:
latest clockworkmod recovery...i reboot into it i wipe data and dalvick, then i install the rom and reboot(i am not a newbie) i have tried with cyanogenmod 7 and 9 , and some custom roms here in the forums...
Click to expand...
Click to collapse
CM7 (and CM7 based ROMs) has to be flashed twice from recovery, and often won't flash from a CF Root kernel; instructions in the Nightly thread, post 1.
I had no issue flashing CM9 but I came to it from CM7 so I had CWMR 5.0.2.7 already. I'm unsure if people flashing from a CF Root kernel have issue moving to CM9 directly or not.
i am on latest recovery i told you and i tried with other roms 2
vladtdr said:
i am on latest recovery i told you and i tried with other roms 2
Click to expand...
Click to collapse
What's your latest recovery? I have 5.5....
Did you flash twice from recovery like I asked? Did you flash from a cf root kernel?
Since you're not giving useful info I'll unsubscribe from this thread now.
Miui = cm7 based
Sent from a Phone
sorry, i am on cwm recovery 5.0.2.7
And did you flash cm7 TWICE from recovery? It won't install otherwise.
Sent from a Phone
yes i flashed it twice, also when i chose the zip it finishes installing in like 2-3 seconds, from what i know a rom takes about 30 seconds to install at least, and then it bootloopes from the samsung galaxy s i9100 screen with the yellow triangle and it keeps restarting and i can't even get into recovery after that, i have to flash cf-root kernel again in recovery then i install simple and clean 2.4(only rom that works besides stock) and i do it all again:|...also when i try to install cm7 with rom manager, when it reboots to install the rom it boots into the stoock recovery and gives me an error, does the battery level count?
Downgrade CWM to an older version.
Flash cfroot KK5 or something like that via Odin and see if that makes a difference.
Also intratech has the old bootloader in his thread to flash via Odin. Might help also.
Sent from my GT-I9100 using XDA App
ok thank you i will report back
Have same problem after flashing KP8 rom... I believe it installed new bootloaders and it won't flash the older ones again.
Went through about 5 or 6 stock roms, some booted but had problems with google and the phone apks . Reloaded kp8 and it works perfectly... Don't have time to play around, working.... Something to do later...
CyanogenMod7
To start off a clean slate :
1. Flash XWKK5 ( Frankenstein build ) from intratech's thread via Odin
2. Flash CF-Root for XWKK5
3. Boot into CWM
4. Wipe data
5. Wipe cache
6. Advanced -> Wipe dalvik cache
7. Install zip from sdcard -> CyanogenModxxx.zip (xxx=version)
8. AGAIN Install zip from sdcard -> CyanogenModxxx.zip
9. Reboot phone
10. If your still getting a bootloop but your keys are backlit , turn off phone , remove and reinsert battery, turn it on
CyanogenMod9
You need to flash the new bootloader too ( read instructions on the CM9 thread)
MIUI
Same as CM7 , except you don't need to flash it twice
Hope i helped
EDIT : Going back from CM9 -> You CANT flash CM7 , you have to flash stock first then CM7 , also you need the old bootloader
gr4ndm4st3r_bl4ck said:
CyanogenMod7
To start off a clean slate :
1. Flash XWKK5 ( Frankenstein build ) from intratech's thread via Odin
2. Flash CF-Root for XWKK5
3. Boot into CWM
4. Wipe data
5. Wipe cache
6. Advanced -> Wipe dalvik cache
7. Install zip from sdcard -> CyanogenModxxx.zip (xxx=version)
8. AGAIN Install zip from sdcard -> CyanogenModxxx.zip
9. Reboot phone
10. If your still getting a bootloop but your keys are backlit , turn off phone , remove and reinsert battery, turn it on
CyanogenMod9
You need to flash the new bootloader too ( read instructions on the CM9 thread)
MIUI
Same as CM7 , except you don't need to flash it twice
Hope i helped
EDIT : Going back from CM9 -> You CANT flash CM7 , you have to flash stock first then CM7 , also you need the old bootloader
Click to expand...
Click to collapse
did exactly like you said, it doesent work
vladtdr said:
did exactly like you said, it doesent work
Click to expand...
Click to collapse
How is your data and/or internet connection? Have you checked the md5 sums of any of the cm7 DL's?
data and internet are fine on other roms, the downloads are good i have downloaded from official site several times
So why do you see a need to have three seperate threads on the one topic
Sent from my ThinkPad Tablet using XDA App
If u have searched u must have find the answer.
Whenever you are flashing any Samsung custom rom and stuck on boot screen, just flash any CFROOT kernel via odin it will boot.
and for CM7 & MIUI just flash Siyah 2.1 or Speedmod 13...it should boot.
This problem was faced by me and I did found the above solutions.
@MODERATORS kindly delete the duplicate posts....
zking said:
If u have searched u must have find the answer.
Whenever you are flashing any Samsung custom rom and stuck on boot screen, just flash any CFROOT kernel via odin it will boot.
and for CM7 & MIUI just flash Siyah 2.1 or Speedmod 13...it should boot.
This problem was faced by me and I did found the above solutions.
@MODERATORS kindly delete the duplicate posts....
Click to expand...
Click to collapse
Not true, Mine goes into boot loop constantly... If it does boot then I get error about google and phone apks and can't get past the "touch the android" page....
I believe their is a minority of sgsII's tha have this problem, might be something to do with the new bootloaders not being completely wiped but it doesn't matter how many times I install a stock rom I get problems... And yes, I always flash the cfroot kernels after... Doesn't help....
Hi.
Having come from the HTC HD2,I am a complete noob when it comes to galaxy s2 and flashing Roms etc;
I know I had problems.....until I discovered that unlike the HD2,placing a rom on the sd card means placing it into the internal memory of the phone and not the sd card you have inserted.
Hope this helps!
---------- Post added at 10:46 AM ---------- Previous post was at 10:42 AM ----------
rustyshack said:
Hi.
Having come from the HTC HD2,I am a complete noob when it comes to galaxy s2 and flashing Roms etc;
I know I had problems.....until I discovered that unlike the HD2,placing a rom on the sd card means placing it into the internal memory of the phone and not the sd card you have inserted.
Hope this helps!
Click to expand...
Click to collapse
What I meant was:
SD card = internal memory of phone i.e. 16Gb
External SD card = the micro SD card you physically insert into the phone
hi guys, first post
ive had my rooted galaxy s2 with the latest siyah kernel 3.3.2, i had cwm recover 5 and rom manager
i tried to flash cyanogen mod through rom manager, following the steps it gave me, i downloaded the files through rom manager and went through all the prompts till i clicked agee to go into recovery mode.
once it did that the phone shut off but would not turn on again so i went to turn on manually, it loads the samsung galaxy screen with the yellow triangle but goes straight into a white flashing screen.
Ive tried taking the battery out, leaving it and putting it back in again, still a flashing screen,
check what i9100 you have and download correct cm9.
using cwm format data system cacha sdcard dalvik
flash cm9 using cwm
rommanager doesnt work on GS2
atifsh said:
check what i9100 you have and download correct cm9.
using cwm format data system cacha sdcard dalvik
flash cm9 using cwm
rommanager doesnt work on GS2
Click to expand...
Click to collapse
i have the international 19100T
ahh rats i should have known rom manager does not work, , im just stuck in a white flash screen on boot up, cant get to cwm, although i can get into odin
would reflashing my kernel on odin get me through? everything is back up onto my sd card.
Try flashing a kernel first, and if that doesn't work, flash a rom in Odin, re-root your phone & restore your backup. But yeah, don't use Rom Manager with a kernel that has CWRecovery. One or the other. Rom Manager has a habit of doing stuff like what's happened to you on SGS2's which also have CWRecovery installed.
MistahBungle said:
Try flashing a kernel first, and if that doesn't work, flash a rom in Odin, re-root your phone & restore your backup. But yeah, don't use Rom Manager with a kernel that has CWRecovery. One or the other. Rom Manager has a habit of doing stuff like what's happened to you on SGS2's which also have CWRecovery installed.
Click to expand...
Click to collapse
awesome, I tried flashing the latest siyah kernel, the one that i already had on my phone before the problems, that didn't do anything to get me through, any suggestions on which kernel/rom to flash?
because you are on siyah and im not comfortable with that, please flash a stock kernel or cfroot kernel and format system data partitions after that.
now flash any official stock ICS or GB rom using Odin.
atifsh said:
because you are on siyah and im not comfortable with that, please flash a stock kernel or cfroot kernel and format system data partitions after that.
now flash any official stock ICS or GB rom using Odin.
Click to expand...
Click to collapse
ohh sweet baby jesus im i flashed a cf kernel and now im into cwm on 4.0.1.5, can i just normal reboot my phone now?
No need to format anything. Given you want to use CM9, I'd recommend you flash CM9 Resurrection Edition in Odin, put the latest CM9 nightly & Gapps on your internal/external SD card then flash that nightly & Gapps in CWM (read the first page of the CM9 discussion thread thoroughly & follow the instructions to the letter. From there you can stick with the CM9 stock kernel or flash whatever other kernel you want to use (provided it's CM9 compatible).
From then on, if you want to flash CM9 nightlies, do it via CWM/CWRecovery, just don't use Rom Manager this time I use CM9 as well & I have it frozen because I use Siyah (which has CWM).
MistahBungle said:
No need to format anything. Given you want to use CM9, I'd recommend you flash CM9 Resurrection Edition in Odin, put the latest CM9 nightly & Gapps on your internal/external SD card then flash that nightly & Gapps in CWM (read the first page of the CM9 discussion thread thoroughly & follow the instructions to the letter. From there you can stick with the CM9 stock kernel or flash whatever other kernel you want to use (provided it's CM9 compatible).
Click to expand...
Click to collapse
alrighty! thanks for the info, is cf kernel compatible with cm9? i want to just have one kernel that'll handle most roms, any suggestions?
ive reloaded my old stable phone version, the version i saved before trying to flash cyanogen mod with rom manager, this version has siyah and stock rom, back to square one *phew*
i still say wipe first, cm9 will come with its own latest cwm that can be used to flash any custom roms after.
flashing via odin version is easy and fool proof as it has everything bundled for correct working of cm9.
If you flash CM9 the CM9 kernel will overwrite/replace your CFRoot kernel, which is fine. As I said in my previous post you can stick with that if you're happy with it, or you can flash any other kernel that's CM9 compatible.
No suggestions/recommendations. Because your experience will not be the same as someone else's using a given rom or kernel. If you want to go down that path, try some kernels to find one you like. To see if a kernel is compatible with CM9, read the the dev thread devoted to the kernel in question.
OK. Given you're back @ square one, Atifsh is right when he says flashing the Resurrection version (Odin version) then flashing Gapps/nightly from there is probably a good way to go for you. Once you've done that, you'll be able to flash CM9 nightlies via CWRecovery. As said previously, read that first page of the CM9 discussion thread/instructions thoroughly before you do anything.
keegan25 said:
alrighty! thanks for the info, is cf kernel compatible with cm9? i want to just have one kernel that'll handle most roms, any suggestions?
ive reloaded my old stable phone version, the version i saved before trying to flash cyanogen mod with rom manager, this version has siyah and stock rom, back to square one *phew*
Click to expand...
Click to collapse
Something similar happened to me too. I flashed stock XWLPG, then siyah 3.3.2 and did a factory reset. After that, got stuck in a flashing white screen after the yellow triangle.
What I did: boot on download mode, flash XWLPG over PC Odin once more, did a full wipe BEFORE flashing siyah and then siyah. Everything went ok this time, but eventually I found out that every time I do a factory reset after siyah that problem would occur.
Regards,
Sent from my GT-I9100 using XDA
keegan25 said:
i have the international 19100T
ahh rats i should have known rom manager does not work, , im just stuck in a white flash screen on boot up, cant get to cwm, although i can get into odin
would reflashing my kernel on odin get me through? everything is back up onto my sd card.
Click to expand...
Click to collapse
exact same problem, except i can't put it into download mode?
i know it's powerbutton vol down but it's not working? any ideas?
acbutcher91 said:
exact same problem, except i can't put it into download mode?
i know it's powerbutton vol down but it's not working? any ideas?
Click to expand...
Click to collapse
Power + vol down + home key?
hi i need help with my cm7 installation cause i never got running cm7 on my device and i really dont know why, so here's the deal:
1.i flashed a stock carrier branded rom that matches my country and carrier (Cellcom, israel) (KJ1)
2.then i flashed a CF-Root kernel that matches my current kernel (CF-Root-SGS2_XW_LUX_KJ1-v5.0-CWM5.zip) (link to the cf-root thread on xda:http://forum.xda-developers.com/showthread.php?t=1103399).
3.i downloaded the cm7 zip file (update-cm-7.1.0-GalaxyS2-signed.zip) and moved it to the root of my sd card ( i tried to install from internal & external too and i still got stuck in a bootloop)
4.i rebooted to cwm recovery with 3 button combo
5.and then i did the following:
wipe data/factory
wipe cache partition
advanced-->wipe delvik cache
install zip from sd card--->choose zip from sd card--->update-cm-7.1.0-GalaxyS2-signed.zip
reboot device.
notes:i have done this proccess on other devices for a thousand times and it worked and i also wanted to mention that i flashed the zip twice sometimes and i also tried to reboot straight into recovery from the advanced tab and it also didnt work.
so i really need help.
Problem could be with the file you flashed...
Anyways give me full info of Your rom and CWM Recovery
And recheck that u have downloaded compatible CM Rom
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]
R u came from ICS
Sent from Galaxy S2 using Cyanogenmod 9
My rom is jhkj1 gb 2.3.5 which i flashed through odin with one file flashing (PDA) and the file i downloaded is for galaxy s2 and i checked it twice and my cwm version is 5.0.2.8 as you can see by the cf-root kernel it says CWM 5
Sent from my GT-I9100 using xda app-developers app
Ok before we start, I have looked and tried everything I can find so I will post what I have done after I post my issue. (I know I'm new but I've been using this site a lot lately I just never signed up)
Alright.
My S2 gt-i9100 running ICS 4.0.3 XXLPB
I can root it with cf mod, no problem and confirmed that the root is working properly.
I use CWM recovery. Every single time I've tried to flashboot a custome rom, from Res Remix to straight up cm10 to other jelly bean mods, all the "top" mods suggested in articles, though it says successful, It always, always gets stuck on the Galaxy s2 screen with the yellow triangle. It does not go black, it just stays on that screen, I've left it for as long as 2 hours and it does not do anything and does not let me back into recovery mode. (download mode yes)
I have, multiple times, re-installed stock rom, re-rooted etc...
cleared cache and davik cache, factory reset and format system (prior to flashing the custome roms and sometimes right after as some suggest)
I even tried a complete wipe of the sd card, system, then reflashed stock rom. It always works to return to stock rom and to root it, but nothing else. It seems every solution I find on this site, and many others are point to the above things I have tried all with a slight variety. I have tried many different custom roms,
I'm lost what to do next? I can't find any other information, my binary count is up to 18 now and none of it has worked.
Which kernel are you using?
tejasrm said:
Which kernel are you using?
Click to expand...
Click to collapse
I'm sorry, I thought I mentioned all the info I had.
My current kernel version for ICS is 3.0.15-I9100XXLPB
The kernels I have tried when booting res remix are both Dormanx(sp?) and CM10.1, also tried cm10.1 with another rom.
Sorry I added info, not sure which one you wanted
bbnuck said:
I'm sorry, I thought I mentioned all the info I had.
My current kernel version for ICS is 3.0.15-I9100XXLPB
The kernels I have tried when booting res remix are both Dormanx(sp?) and CM10.1, also tried cm10.1 with another rom.
Sorry I added info, not sure which one you wanted
Click to expand...
Click to collapse
1) re- install stock ICS 4.0.3 rom vide ODIn.
2) use the tar file of siyah kernel v4.1.5 or 5.0.1 to root ur phone vide Odin.
3) now use the siyah kernel v4.1.5/5.0.1 recovery to flash any custom rom of ur choice by fallowing the install instruction of the same carefully
Sun90 said:
1) re- install stock ICS 4.0.3 rom vide ODIn.
2) use the tar file of siyah kernel v4.1.5 or 5.0.1 to root ur phone vide Odin.
3) now use the siyah kernel v4.1.5/5.0.1 recovery to flash any custom rom of ur choice by fallowing the install instruction of the same carefully
Click to expand...
Click to collapse
ohh, yes the Siyah kernel, I failed to mention that i tried rooting using the siyah kernel early on and it would get stuck on the boot screen and even ICS wouldn't work. now on the other hand, this was one of my early attempts and i've tried everything else twice so I will try this option again and get back thanks
I have now tried to boot kernel Siyah 5.0.1 twice and it gets stuck on the kernel boot screen after the samsung s2 screen (the one with the yellow triangle) The screen is a ying-yang symbol with pink/purple lighting. I have left it on for 10 minutes and it stays on that screen. I have removed the battery and put it back in and now it doesn't even get past the s2 bootup screen, I left it for a couple minutes, still nothing. Reboot the phone again and now it's in Kernel Panic Upload Mode... Going back to stock rom. I'll try to find a 4.1.5 siyah kernel and try that one and see if it does anything different.
Sun90 said:
1) re- install stock ICS 4.0.3 rom vide ODIn.
2) use the tar file of siyah kernel v4.1.5 or 5.0.1 to root ur phone vide Odin.
3) now use the siyah kernel v4.1.5/5.0.1 recovery to flash any custom rom of ur choice by fallowing the install instruction of the same carefully
Click to expand...
Click to collapse
Alright, after what happened in the previous message, I have download siyah kernel 4.1.5 and have attempted to flash via odin to root my phone. It did not work either, same issue as 5.0.1. back to stock rom/rooted with cf-root
Try dorimanx ver. 7+ tar or zip
Sent from my GT-I9100 using xda premium
stopro said:
Try dorimanx ver. 7+ tar or zip
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Just tried dorimanx version 7.50, gets stuck on the bootlogo screen, similar to what siyah was doing.
edit: Also tried dorimanx 8.1, same thing.
Edit: Tried dorimanx 8.3, flashed through cwm recovery this time, still does the same thing
Mate OK download gskernel viper script download syiah 4+ flash boot should work
Sent from my GT-I9100 using xda premium
stopro said:
Mate OK download gskernel viper script download syiah 4+ flash boot should work
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
hi, i have a problem close to the problem here. i recently soft bricked my phone ,sgs2 gti9100 with jellybean 4.1.2. so i tried installing a custom rom named neatrom. after installation the phone reboots and stays in the flashing android sign. it stays like that until the battery runs out. do you think i should change kernals or flash stock rom?
Najahmas said:
hi, i have a problem close to the problem here. i recently soft bricked my phone ,sgs2 gti9100 with jellybean 4.1.2. so i tried installing a custom rom named neatrom. after installation the phone reboots and stays in the flashing android sign. it stays like that until the battery runs out. do you think i should change kernals or flash stock rom?
Click to expand...
Click to collapse
hi mate sorry for late answer but first instal good stock rom by odin then instal best out there kernel for s2 dorimanx but there is 3 versions of it 8.x for stock 9.x mali v2 mean old jb and 10.x mali v3 for latest jb and kk good luck
Najahmas said:
hi, i have a problem close to the problem here. i recently soft bricked my phone ,sgs2 gti9100 with jellybean 4.1.2. so i tried installing a custom rom named neatrom. after installation the phone reboots and stays in the flashing android sign. it stays like that until the battery runs out. do you think i should change kernals or flash stock rom?
Click to expand...
Click to collapse
And don't forget to go in recovery mode and wipe out the dalvik memory under advanced. After wiping dalvik/clearing user data and formatting your phone, reinstall the rom of your choice (that's compatible with the phone)
you can also install siyah 6 and flash kitkat directly from recovery.
Then it would use kitkats kernel and bootup the rom
thank you guys for your replys. i will try what you suggested and get back to you
Hello
i have galaxy S3 GT i9300 running on stock rom 4.3 , i tried to flash this rom
SmartDroid AOSP V45.0 (b82)
http://forum.xda-developers.com/galaxy-s3/development/myown-cm11-build-todays-git140125-t2624535
but i got stucked in boot loop i follow the instruction very well and tried many times but in vain
i returned back to stock again
any help to make this rom a try?
Thanx
elelamy said:
Hello
i have galaxy S3 GT i9300 running on stock rom 4.3 , i tried to flash this rom
SmartDroid AOSP V45.0 (b82)
http://forum.xda-developers.com/galaxy-s3/development/myown-cm11-build-todays-git140125-t2624535
but i got stucked in boot loop i follow the instruction very well and tried many times but in vain
i returned back to stock again
any help to make this rom a try?
Thanx
Click to expand...
Click to collapse
Install PhilZ recovery choose option in menu Wipe Data/Factory Reset then choose Clean to install a new rom this will wipe/format the correct files for you to flash your rom. (Make sure you have your rom on the ext sd card ready to flash! This will format your system partition so don't reboot untill you have immediately flashed the rom after wiping)..
Thanks fir your reply
I already did exactly like u said but the same result bootloop
Is there any rom or kernil to fkash before flashing this romSmartDroid AOSP V45.0?
elelamy said:
Thanks fir your reply
I already did exactly like u said but the same result bootloop
Is there any rom or kernil to fkash before flashing this romSmartDroid AOSP V45.0?
Click to expand...
Click to collapse
No.. nothing special to flash before installing.. Are you on latest PhilZ recovery?
Can you install other roms? ( To see if your phone will install other roms)
Have you tried factory resetting after flashing? (To clear any data issues that are causing a bootloop)
Have you tried downloading the rom again? ( could be a bad download)
Have you tried flashing the rom booting up the phone then flashing the gapps.
Also post the exact method that you are using to install..
tallman43 said:
No.. nothing special to flash before installing.. Are you on latest PhilZ recovery?
Can you install other roms? ( To see if your phone will install other roms)
Have you tried factory resetting after flashing? (To clear any data issues that are causing a bootloop)
Have you tried downloading the rom again? ( could be a bad download)
Have you tried flashing the rom booting up the phone then flashing the gapps.
Also post the exact method that you are using to install..
Click to expand...
Click to collapse
It's solved now by using the latest philz
Thanks for helping