Hi
I have not found another subforum best for this so sorry if it goes here
The mess, I recently purchased a mini dealextreme media center pc tv for android,
OS Android 4.0
Chipset BOXCHIP A10
Processor Frequency Cortex A8 1.2GHZ
RAM 1GB DDR III
Internal Memory 4GB
The issue is that the toy in question does not go bad just that the web browser is closed every few minutes when I open pages with Flash content
Keep a android 4.0.1 I tried with several browsers, dolphin, firefox ... all the same when I open a page with flash, hangs and then displays the application has stopped working and closes
I tried a couple of things:
Uninstall the Flash plugin installed by default leading (v11)
factory reset the pileup erasing all
Do not look any hardware problem, it's actually quite powerful and the websites should move smoothly
Let's see if anyone can give me any advice on what I can do, because if you do not return or
This is information that gives me TVBox
Kernel version: 3.08
Android version 4.04
number of compilation: crane_tvbox-eng 4.0.4 IMM76D 20120714 test-keys
thanks
Related
I have two problems I need help with, and this might be the wrong forum.
I'll start off with some very specifics, including technical specs. I have an Acer Iconia a500. It has an nVidia Tegra 2 T20 CPU (ARMv7 rev 0 version 71) with 1GB of RAM, 16GB of storage space, and an 8GB microSD card. Manufactured early 2011. It is currently running Android 4.1.2.
Kernel version 2.6.39.4-jellyplay_v3.1+ [email protected]#1
Thu Nov 22 19:23:47 ICT 2012
Build number
cm_a500-userdebug 4.1.2 JZO54K eng.pj.20121122.181927 test-keys
First, the Google Search crashes every time I open it. I did the OS install (ROM, OS, almost same thing) from a clean wipe. Google Search, when I open it, gets through the Google Now setup stages. But whether I choose yes or no, it then returns to the previous screen with no errors or messages for me. I found a suggestion that said I should wipe my cache- that just forced Android to 'optimize' my apps- no change in behavior. Anybody have any hints?
Second, Google Chrome hasn't worked for ages on my tablet, even under the stock (but rooted) ICS. It says 'Critical functionality required to run Chrome is missing: either your Chrome installation is incomplete, or not compatible with this version of Android.' I did try to change the build.prop file to match the ILK74M, I think was the suggestion, and that didn't work. Before I changed the build.prop, it reported that my Android installation may be corrupt. I also tried un-updating the market, and reinstalling the app. No dice. Ideas?
Finally, I'm using pjsports's CM10 Jellybean ROM. It was last updated on November 26th, 2012. Is there a more updated CM10 and/or Jellybean ROM for the Acer a500 that I'm missing? EDIT: Just found pjgsport's weekly release. I'll try updating to that. I'd still like help with the other two, or at least an explanation.
Hello. I recently bought e Star MID1028.
(Display: 10.1", resolution 1280*800,CPU: Rockchip 3066 ,1.6Ghz , Dual-core CPU + Quad-core GPU, SDRAM: 1GB DDR3, Internal storage: 8GB, OS: Android 4.1,...)
I wanted cheap device - nor minimal needs, so it is not that bad for me. But there are some preinstalled apps, that cannot be updated or uninstalled (skype, few games). I tried to remove them via application manager, but after device restart, they still try to work, and I don't like it.
Is there a way to root this device, so I can remove those unwanted apps permanently, or even install a different rom?
It's hard to me to actually find a whole lot of information so I'll just like you to the Tablet that I purchased. I know it is an AllwinnerA10 Boxchip processor speed runs at 1.2 GHZ. So basically when I first got it it was running fine, I attempted to flash an updated rom which ended up failing, so I decided to install a new recovery System. I do not recall the original recovery system, but what happened is I installed the wrong recovery system. I have an a10 and I accidentally installed a A13 Recovery System "version 6.0.2.8." instead of an A10 Recovery System. Basically the Recovery Mode is only partially functional due to it being programmed for an A10. It will not let me install/flash an android image and the screen flashes, it will also not allow me to mount files from my internal SD card, I believe that it will allow me to install from a external micro-sd. However, it needs to be charged at the moment so my memory is a little hazy on whether it allows me to. So lets assume that it doesn't allow me to do that for now. How would I go about fixing this problem, and unbricking my Tablet. Since I haven't made enough posts I am unable to send you a direct link. I can however give you some keywords so that it pops up when you are looking for it. It is from LightintheBox.com, it should be the 4th url on a google search.
DesireTab - Android 4.0 Tablet with 9.7 Inch Capacitive Touchscreen (16GB, 1G RAM, 1.2GHz, 3G, Dual Camera, HDMI Out,8000mA)
jrockfever said:
It's hard to me to actually find a whole lot of information so I'll just like you to the Tablet that I purchased. I know it is an AllwinnerA10 Boxchip processor speed runs at 1.2 GHZ. So basically when I first got it it was running fine, I attempted to flash an updated rom which ended up failing, so I decided to install a new recovery System. I do not recall the original recovery system, but what happened is I installed the wrong recovery system. I have an a10 and I accidentally installed a A13 Recovery System "version 6.0.2.8." instead of an A10 Recovery System. Basically the Recovery Mode is only partially functional due to it being programmed for an A10. It will not let me install/flash an android image and the screen flashes, it will also not allow me to mount files from my internal SD card, I believe that it will allow me to install from a external micro-sd. However, it needs to be charged at the moment so my memory is a little hazy on whether it allows me to. So lets assume that it doesn't allow me to do that for now. How would I go about fixing this problem, and unbricking my Tablet. Since I haven't made enough posts I am unable to send you a direct link. I can however give you some keywords so that it pops up when you are looking for it. It is from LightintheBox.com, it should be the 4th url on a google search.
DesireTab - Android 4.0 Tablet with 9.7 Inch Capacitive Touchscreen (16GB, 1G RAM, 1.2GHz, 3G, Dual Camera, HDMI Out,8000mA)
Click to expand...
Click to collapse
bump
I recently got a generic chinese tablet by the maker of idolian and the tablet model is mini studios (however I found many other generic tablets that are the exact same under different maker and name). Any way after rooting device via Kingroot (which I uninstalled afterwards) I have ran into a weird bug where my device is seen as an iOS device. A few different sites have told me couldn't download app because it's for android not iOS and I also received an email from google saying unknown install from iOS device. I cannot figure out why this is happening. I also have been having issues will google apps, they keep disabling themselves and 50% I open chrome the device freezes and restarts. Google services was not preinstalled I did have to install google apps myself. Can anybody give reason to why it's being seen as an iOS software and why google's apps are having issues? Here is also more info on the tablet:
CPU: RK3066 1.61 GHz
GPU Renderer: Mali-400 MP
Build ID: rk20sdk-eng 4.1.1 JRO03H eng.root.20130515.105717 test-keys
Java VM: Dalvik 1.6.0
OpenGL ES 2.0
Kernel: armv7I, vs. 3.0.8+
Like I said I rooted it via Kingroot, tried removing kingroot via Super-sume but was unsuccessful and just deleted all Kingroot files I could find. the only things I've really done that really affects the OS is I have the Xposed framework installed as well as CWM-based Recovery modified by androtab.info v6.0.3.1. Thank you to anyone who can help me out with this
Hi
I have a chinese android phone, it displays "SUSAN" when it starts up and here are the techincals:
Development Device ID
J3RF-M3EP-6USW-6
MODEL NUMBER
M5
ANDROID VERSION
5.1
BASEBAND VERSION
SC7731
BUILD NUMBER
DW_X10_H2.0_GT022X_M5_BOE_QG_FL_V1.0_20171202
HARDWARE VERSION
HW_V2.0
I am trying to find ANY rom that will actually allow me to use the phone.
It has an Octa Core, 2GB ram, 32GB storage.
Problem is, the firmware that is installed at the moment will not allow me to install ANYTHING as it says there is not enough space.
I have done fill hardware resets and it still reports this. I have even put a 32GB Micros SD and set that to be the install location, and it still wont allow me to install anything.
The phone is already unlocked.
I have NEVER flashed a firmware before so please, make the instructions as idiot proof as possible.
Thank you in advance.
Dude, that phone is the classic sh*tty clone that dont have what they say, just use a sdcard and is done