i have 2 photons right here, and trying to get them into rsd mode, and all i get is
rsd
STarting RSD protocol support
and it will not go any farther then that, got moto usb cable plugged in, it finds it under device manager, and won't go anywhere, any other way to get into rsd mode?
You need to run rsd lite on the pc
Related
I'm trying the flash the 1.83 update to my Atrix and I'm having no trouble with the file or anything but I cannot for the life of me get RSD to recognize my phone.
I'm using Vista 64 bit, yes I have current drivers installed.
USB Debugging is on, USB connection set to none
I'm using RSD 5.0
I'm following all the steps but I can't seem to get it to work.
thezoolander said:
I'm trying the flash the 1.83 update to my Atrix and I'm having no trouble with the file or anything but I cannot for the life of me get RSD to recognize my phone.
I'm using Vista 64 bit, yes I have current drivers installed.
USB Debugging is on, USB connection set to none
I'm using RSD 5.0
I'm following all the steps but I can't seem to get it to work.
Click to expand...
Click to collapse
Did you try a different version of RSD?
Have you also tried this?
" While turning the phone on, hold the Volume Up button until it acknowledges RSD
Your device will say “Starting RSD protocol support”"
Start RSD and see if the phone is there.
I used a couple of the previous versions to no avail and finally tried 5.0
Yes I am booting it into the RSD protocol.
Like I said, I've followed the guide step by step, I've done everything I can think of and have read of and still no luck.
thezoolander said:
I used a couple of the previous versions to no avail and finally tried 5.0
Yes I am booting it into the RSD protocol.
Like I said, I've followed the guide step by step, I've done everything I can think of and have read of and still no luck.
Click to expand...
Click to collapse
You can try the IRC channel. A few people in there might have had the same problem. You can try asking there..
are you using a stock charging cord
and did you try plugging it in the back of the comp
Yes stock cord and back of the comp,I've tried every port I have.
I'm trying to root my atrix since I restored it back to stock over usb no problem when I start rsd on atrix boot and install over rsd lite in windows no problem. So I get into 1.2.6 and 1.8.3 and the usb is not detected at all for what reason? I tried enabling usb debugging so I can root it and put cwm on.
So why isn't usb being detected? When the computer detects it every time when I start rsd from the atrix and rsd lite on the computer.
I tried 3 different cables, they all work perfectly just not in 1.2.6 or 1.8.3... I mean I tried uninstalling drivers etc with no effect. I tried restarting the phone with it disconnected after uninstalling drivers. Restarted the phone and booted windows then plugged it in and nothing happens.
Please help thanks
Hey Guy
I was trying to find a solution for the last 4 hours. I was running the Neutrino Rom before my display got a hardware error. Before I sent it back for warranty, I installed the original Motorola Firmware so the "unlocked" in the starting display is gone. Now I got my phone back and I wanted to unlock it again, because neither rooting nor installing a custom rom is possible. So I installed the drivers and the phone got recognized in normal mode. Furthermore I reboot it in RSD support mode and Windows 8 installed the SF Flash Olympus thing. I also can use fastboot. The only thing which doesnt recognize my phone is RSD lite so I couldnt find a way to unlock the bootloader. I also started in Admin mode and disabled the Windows User Control thing.... I changed the cable cuz I read it might be the cable. Still isnt working. As soon as I connect my phone in RSD support mode, Windows makes the sound of a connected device but still RSD won't recognize it. Don't know what to do. Is there another option?
I'm running on Android 2.3.4 (Build 4.5.2A-74_OLE-31.20)
It's german Telekom
I don't want to do another RSD Lite Thread but I tried every suggestion in all the other threads.
Thanks alot for your help
Tried on a XP Computer....Not working either...
Which version of RSD are you running?
- Remember to use a rear USB port just in case
- Download and install the latest USB drivers from Motorola. They can be found here: USB and PC Charging Drivers - Motorola Mobility, Inc. USA
- Download and install the latest RSD Lite as a computer Administrator (currently version 5.4.4) from here: RSDLite5.6
coolni said:
Hey Guy
I was trying to find a solution for the last 4 hours. I was running the Neutrino Rom before my display got a hardware error. Before I sent it back for warranty, I installed the original Motorola Firmware so the "unlocked" in the starting display is gone. Now I got my phone back and I wanted to unlock it again, because neither rooting nor installing a custom rom is possible. So I installed the drivers and the phone got recognized in normal mode. Furthermore I reboot it in RSD support mode and Windows 8 installed the SF Flash Olympus thing. I also can use fastboot. The only thing which doesnt recognize my phone is RSD lite so I couldnt find a way to unlock the bootloader. I also started in Admin mode and disabled the Windows User Control thing.... I changed the cable cuz I read it might be the cable. Still isnt working. As soon as I connect my phone in RSD support mode, Windows makes the sound of a connected device but still RSD won't recognize it. Don't know what to do. Is there another option?
I'm running on Android 2.3.4 (Build 4.5.2A-74_OLE-31.20)
It's german Telekom
I don't want to do another RSD Lite Thread but I tried every suggestion in all the other threads.
Thanks alot for your help
Click to expand...
Click to collapse
I couldn't get RSD Lite 5.6 to connect to my Atrix on Windows 8 either. I had to use a Windows 7 computer ( that has all the moto USB drivers installed on it ) to unlock my bootloader. Once you install the moto drivers, and you plug in the phone, you should see it installing usb drivers. If you turn on usb connection (from the notification bar USB options) to SDCard storage it will install more drivers. Then you can open the usb selection menu in the notification bar again and switch back to none. Finally got to Settings, Applications, Developer Options, and enable USB debugging which will install even more drivers.
Then firing up RSD Lite you should see it connect to your phone after that. I just couldn't get it to do it in Windows 8.
forget about it.....
you are locked after servicing your phone
no way to install anything ...
the strange thing is that after connecting the phone serviced
windows doesnt recognize the driver
but evrtyhin is fine with my other atrix 4g.
i dont know what they have done to the phone not even trying to load via sbf works.....
nothing
Hi forum friends, I have a problem with my recently purchased motorola X912, it happens that when I buy, I wanted rootear, well you connect and rootie with blade razr program, everything went well, I had my super user icon the desktop, when the next day it disappears root and connecting the phone to usb connect as if not only loads but does not find anything, and I can not do anything for the sole use normally but again nothing to do, I know that I all I can use to see if it connects, I put it into recovery mode and just connect with rsd lite flash sb BP ap mode but flash does not recognize that is connected
Below I detail everything and done:
1-change usb cable usb cable used and tested five other cell and recognize good
2-used several computer testing to see if it was the usb port and nothing
3-install Linux to see if it was windows and nothing
5-downloaded and copied very many rom sd memory installing it for recovery and nothing says I aborted ..
Six factory-refurbished
7-installed rsd lite to flash out there and not detected by putting it in ap
8 - downloaded the razr profits and not recognizing anything either does not work
9 - install and reinstall the motorola driver
By putting the phone in flash sb BP Modol rsd lite recognizes it no problem but do not know what is done in this function.
That could make BP mode flash sb pc recognize me cel. or you could make root of micro sd installing it and if there is some method
the smarphone freezes all the time
Thanx you for help me
earlier rsdlite used to detect my phone with same drivers which i am using now.........
bt now rsd lite does not detect my phone
tried many times .....also reinstalled rsd lite
plz help what to do