I have a galaxy s2 the telus variant I updated it to ics threw kies and now it won't boot it just get stuck on the s logo its not unlocked or rooted
Sent from my Nexus S using xda app-developers app
Snapg2 said:
I have a galaxy s2 the telus variant I updated it to ics threw kies and now it won't boot it just get stuck on the s logo its not unlocked or rooted
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
By the "telus variant", do you happen to mean the SGH-T989D? (check the label under your battery for model number)
If the device model is indeed the SGH-T989D, you should to to that device forum, which is located at http://forum.xda-developers.com/forumdisplay.php?f=1329.
This post is currently in the forum for the GT-I9100, which is a different phone than the SGH-T989D.
Man just do a factory reset... Wipe data and you should be good to go
Related
A friend got his galaxy note recently ,it was update from 2.3 which was rooted to android 4.0.3 then re-rooted it again at the new os . it also had the radio to work on t-mobile , it was working at the os for a bit (they r telling me that since it went to 4.0.3 it wasn't seeing the sim) , i ask them to check for the imei and they said it say unknown and the basband is the same , is there a way to fix it . also the backup that was make using clockworkrecovery, its seem they save it to the internal sd of the phone and it may have got format ..
can this been fix , also the phone does bootup and find wifi but no sim ...
thx all, any help would be highly great fully..
this is a great site , u guys r the one who help me mod my google g1 with android 2.2 at the time , and i still have it running the same one ...
Try another modem
http://forum.xda-developers.com/showthread.php?t=1573568
[RADIO][MOD][T-Mobile](5.02) Tmobile SII leaked ics based modem+ blaze GB
Sent from my Galaxy SII T-mobile using xda premium
funziebear said:
Try another modem
http://forum.xda-developers.com/showthread.php?t=1573568
[RADIO][MOD][T-Mobile](5.02) Tmobile SII leaked ics based modem+ blaze GB
Sent from my Galaxy SII T-mobile using xda premium
Click to expand...
Click to collapse
Are u sure these modem files would work on the att galaxy note, i don;t want them to flash it and make it any worse than it is, also which of the files to use and where should i flash it from , in the CWM or odin ...
Those are made for the note on T-Mobile use cwm just follow the steps on that thread
Sent from my Galaxy SII T-mobile using xda premium
Just notice there isn't any so yeah download then boot into cwm wipe wipe wipe the installzip
Sent from my Galaxy SII T-mobile using xda premium
funziebear said:
Just notice there isn't any so yeah download then boot into cwm wipe wipe wipe the installzip
Sent from my Galaxy SII T-mobile using xda premium
Click to expand...
Click to collapse
R u sure this would fix it, they copy the efs folder but its just 80kb also there is no nv_data.bin in anywhere of that folder .
should they copy it as a tar file or can just copying the folder normally work?
if this can be fix even by remote access over team viewer , let me know who can do it and the cost...
I installed a rom, then found out it was bad, and unrooted the wrong model. so now i have a phone with the wrong model number. i need it to be samsung galaxy s2 at&t and right now its Samsung I9100. i guess i have to root, and install the original rom?
The i9100 is the sgs2 if you have gsm working or no bugs there is no need to reflash
Sent from my GT-I9001 using xda app-developers app
I have an AT&T Galaxy S2 Skyrocket (SGH-I727) ...I flashed the CM10 Superheavy 5.0 ROM, but I did the Hercules (T989) by accident. Now my model number is (T989). I tried to flash the stock .tar file for I727, but I just kept getting the AT&T boot screen looping. How can I go back to I727 so I can reflash the correct CM10 ROM?
Lol very funny be careful next time try holding the volume up and power to go to twrp if u have
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Dear all,
I think I have soft bricked my S3. I had stock Hong Kong 4.0.4 installed but for quite a long time the 4.1.1 update was not made available for Hong Kong region. So I flashed stock rom Pakistan 4.1.1. Afterwards when the Hong Kong 4.1.1 was released, I flashed again to Hong Kong from Pakistan. I have done flashing my S3 and Galaxy Note many time without any problem but now, my S3 is giving me problems. There was some problem with the hong Kong rom (android system sometimes stucked) so i flashed back to Pakistan but ever since, neither of these ROMs are working anymore. When I complete the flashing process, and the phone restarts, it stucks on the Samsung logo. I tried to flash custom rom like Cyanogen and MIUI and they work fine but not the stock roms. Any ideas what the problem might be?
Thanks
Format data from recovery
Restore via Odin flashing XXELKC for latest firmware
Sent from my Samsung Galaxy SIII GT-I9305 using xda premium
Dont ever mess with Pakistan. That region will kill you.
Sent from my EVO using xda premium
scottspa74 said:
Dont ever mess with Pakistan. That region will kill you.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Racist. ;-P
Sent from my Nexus 4 using xda premium
weeo said:
Racist. ;-P
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
+1 :highfive:
So basically I updated my galaxy s2 t989 to jellybean so I would get the upgraded radio so I could install custom roms. After upgrading through Samsung kies I tried again and got stuck in a collaterals recovery boot loop. I restored to a previous backup before I upgraded but the problem is I am back on 4.0.4 but It kept the 4.1.2 radio. So now kies says my firmware is not compatible to upgrade. Is this common or am I totally screwed?
Sent from my SGH-T989 using xda app-developers app
catylistic said:
So basically I updated my galaxy s2 t989 to jellybean so I would get the upgraded radio so I could install custom roms. After upgrading through Samsung kies I tried again and got stuck in a collaterals recovery boot loop. I restored to a previous backup before I upgraded but the problem is I am back on 4.0.4 but It kept the 4.1.2 radio. So now kies says my firmware is not compatible to upgrade. Is this common or am I totally screwed?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Although I do not personally own an S2 the common method is finding a radio version at 4.0.4 and flashing that. Finding it will be the difficult part. Ask around and see if one of your buddies (XDA is your buddy ) has a copy that they can lend you.
qmarchi said:
Although I do not personally own an S2 the common method is finding a radio version at 4.0.4 and flashing that. Finding it will be the difficult part. Ask around and see if one of your buddies (XDA is your buddy ) has a copy that they can lend you.
Click to expand...
Click to collapse
So would I just flash it through Odin?
Sent from my SGH-T989 using xda app-developers app
Also do you know if that is why my phone isn't getting recognized by Kies?
Sent from my SGH-T989 using xda app-developers app
catylistic said:
So would I just flash it through Odin?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
catylistic said:
Also do you know if that is why my phone isn't getting recognized by Kies?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
As I said. I don't own any Samsung devices so I can't help you there. Basic andoiud help is finding a raido and flashing it through a recovery, CWM or otherwise.