does anyone know how to solve this problem
as i read on http://forum.xda-developers.com/showthread.php?t=1780329&page=62, the posted problem is error status 7 and can be repaired by deleting 3 first line in updater script.
here's wahat happen when i try to flash the rom.
-- Installing: /sdcard/FXP138-cm-10-20120916-UNOFFICIAL-haida.zip
Finding update package...
Opening update package...
Installing update...
E:Error in /sdcard/FXP138-cm-10-20120916-UNOFFICIAL-haida.zip
(Status 6)
Installation aborted
about my device:
xperia neo v (mt11i)
bootloader unlocked
rooted
stock 4.1.B.0.431 sony rom
stock 4.1.A.0.562 sony kernel
ClockWorkMod Recovery 5.0.2.7-nAa-r2
please help!!!!
Try redownloading the package?
Herumi said:
does anyone know how to solve this problem
as i read on http://forum.xda-developers.com/showthread.php?t=1780329&page=62, the posted problem is error status 7 and can be repaired by deleting 3 first line in updater script.
here's wahat happen when i try to flash the rom.
-- Installing: /sdcard/FXP138-cm-10-20120916-UNOFFICIAL-haida.zip
Finding update package...
Opening update package...
Installing update...
E:Error in /sdcard/FXP138-cm-10-20120916-UNOFFICIAL-haida.zip
(Status 6)
Installation aborted
about my device:
xperia neo v (mt11i)
bootloader unlocked
rooted
stock 4.1.B.0.431 sony rom
stock 4.1.A.0.562 sony kernel
ClockWorkMod Recovery 5.0.2.7-nAa-r2
please help!!!!
Click to expand...
Click to collapse
Remove all the get.prop lines from the update script !
And be sure the version u r downloading is for your phone only !
Neo - hallon neo v - haida !
Cause these type of device recognition errors don't usually happen with fxp's cm10 !
Sent from my Neo V using tapatalk 2
Dev Jaskirat said:
Remove all the get.prop lines from the update script !
And be sure the version u r downloading is for your phone only !
Neo - hallon neo v - haida !
Cause these type of device recognition errors don't usually happen with fxp's cm10 !
Sent from my Neo V using tapatalk 2
Click to expand...
Click to collapse
here's what happen, i try to flash the rom with the original downloaded file, it says ERROR (status 7)
when i remove all the get.prop lines from the update script, it says ERROR (ststus 6)
i'm really sure that i download the real haida(xperia neo v) file because during deleting the update script get.prop line, it contain mt11, haida, lines
so how????
Herumi said:
does anyone know how to solve this problem
as i read on http://forum.xda-developers.com/showthread.php?t=1780329&page=62, the posted problem is error status 7 and can be repaired by deleting 3 first line in updater script.
here's wahat happen when i try to flash the rom.
-- Installing: /sdcard/FXP138-cm-10-20120916-UNOFFICIAL-haida.zip
Finding update package...
Opening update package...
Installing update...
E:Error in /sdcard/FXP138-cm-10-20120916-UNOFFICIAL-haida.zip
(Status 6)
Installation aborted
about my device:
xperia neo v (mt11i)
bootloader unlocked
rooted
stock 4.1.B.0.431 sony rom
stock 4.1.A.0.562 sony kernel
ClockWorkMod Recovery 5.0.2.7-nAa-r2
please help!!!!
Click to expand...
Click to collapse
just try to redownload and reflash. that always work for me.
Herumi said:
does anyone know how to solve this problem
as i read on http://forum.xda-developers.com/showthread.php?t=1780329&page=62, the posted problem is error status 7 and can be repaired by deleting 3 first line in updater script.
here's wahat happen when i try to flash the rom.
-- Installing: /sdcard/FXP138-cm-10-20120916-UNOFFICIAL-haida.zip
Finding update package...
Opening update package...
Installing update...
E:Error in /sdcard/FXP138-cm-10-20120916-UNOFFICIAL-haida.zip
(Status 6)
Installation aborted
about my device:
xperia neo v (mt11i)
bootloader unlocked
rooted
stock 4.1.B.0.431 sony rom
stock 4.1.A.0.562 sony kernel
ClockWorkMod Recovery 5.0.2.7-nAa-r2
please help!!!!
Click to expand...
Click to collapse
Try flashing the Kernel first using Flashtool and then boot into recovery. Now flash the ROM,should work now
try this.
first install any custom rom. anyone you like, any version.
make sure the phone should work on the rom.
then following step by step procedure install cm10.
this time it should flash without problems,.
freaktechz said:
Try flashing the Kernel first using Flashtool and then boot into recovery. Now flash the ROM,should work now
Click to expand...
Click to collapse
What kernel do you mean?
The boot.img one?
Did that...
Also I installed another ROM and tried to install CM10, still getting error 7 and error 6 if I remove the get.prop lines.
Herumi said:
does anyone know how to solve this problem
as i read on http://forum.xda-developers.com/showthread.php?t=1780329&page=62, the posted problem is error status 7 and can be repaired by deleting 3 first line in updater script.
here's wahat happen when i try to flash the rom.
-- Installing: /sdcard/FXP138-cm-10-20120916-UNOFFICIAL-haida.zip
Finding update package...
Opening update package...
Installing update...
E:Error in /sdcard/FXP138-cm-10-20120916-UNOFFICIAL-haida.zip
(Status 6)
Installation aborted
about my device:
xperia neo v (mt11i)
bootloader unlocked
rooted
stock 4.1.B.0.431 sony rom
stock 4.1.A.0.562 sony kernel
ClockWorkMod Recovery 5.0.2.7-nAa-r2
please help!!!!
Click to expand...
Click to collapse
Hi,
I just installed FXP142-cm-10-20121013-UNOFFICIAL-haida.zip. it is working fine. This was my first flash infact.
I think you need to change your kernel.
Steps I did :
1. copy FXP142-cm-10-20121013-UNOFFICIAL-haida.zip to sdcard
2. flash boot.img(which comes with the package), i did it with flashtool... You need this kernel (I am not sure as i am still a noob.)
3. then go to recovery and install above mentioned zip.
Related
hi guys, im trying to test the new 002 test version of OXP ICS rom by paul-xxx, and im trying to flash the nAa ics kerlen by stelios97, and everyone has successfully flashed, but i got a error in flashtool: Error flashing. Aborted.
what i do?
thx
brucestrela said:
hi guys, im trying to test the new 002 test version of OXP ICS rom by paul-xxx, and im trying to flash the nAa ics kerlen by stelios97, and everyone has successfully flashed, but i got a error in flashtool: Error flashing. Aborted.
what i do?
thx
Click to expand...
Click to collapse
You did wrong somewhere. You should do the steps properly and you will get it in right place. BTW where did you find the kernel. Can you give me the link
Sent from my E10i using XDA
I also have problems with flashing the ICS kernel, but this is what I get:
Code:
17/051/2012 16:51:48 - ERROR - (X10flash.java:349) - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Failed to init erase";
I can flash any other kernel without problems, I have tried to redownload the the kernel file, update to latest Flashtool and tried flashing it using another computer, and I still get this error
here: http://www.mediafire.com/?ish1obpr8mtxdh6
any other kernel flash normally, just this one don't flash
good luck~
Hello Guys, i reset my mobile (Sony Ericsson X8) to original ROM, before a i have install and use FroyoBread by Doixanh, now when i go to xRecovery and try install any ROM appear this :
SDCARD:update.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/update.zip
(bad)
Installation aborted.
remenber i use X8
E15a
Firmware : 2.1-update1
Base Band 015
Kernel : 2.6.29 [email protected] #1
2.1.1.A.0.6
Wait for solutions, thanks and sorry for my english.
Hi,
Try performing a hard reset by PC Companion, and start all over again. I recommend use flashtools to perform root, flash the baseband 015, and to install xrecovery.
Sorry for my bad english
Sent from my X8 using XDA
Have you tried using different ROMs? Maybe it's just the one you're trying to install.
If not, try doing something as simple as a battery pull. Or maybe try resetting everything back to factory and starting over? You probably missed a step somewhere.
If you are trying to get into recovery and it goes straight to that message then that means u have an update.zip in your sdcard.if ur trying to install a rom and u get that message then ur rom u downloaded is just not good.
Sent from my Amazon Kindle Fire using xda app-developers app
apariz said:
Hello Guys, i reset my mobile (Sony Ericsson X8) to original ROM, before a i have install and use FroyoBread by Doixanh, now when i go to xRecovery and try install any ROM appear this :
SDCARD:update.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/update.zip
(bad)
Installation aborted.
remenber i use X8
E15a
Firmware : 2.1-update1
Base Band 015
Kernel : 2.6.29 [email protected] #1
2.1.1.A.0.6
Wait for solutions, thanks and sorry for my english.
Click to expand...
Click to collapse
Try another Rom or re-download your Rom. Also you can try to re-flash your recovery.
Sent from my Desire HD using xda premium
I just unlocked bootloader and flash ICS kernel to Advanced Stock ICS Kernel
When I tried to flash KA10 Xperia SSpeed in the recovery mode, it said installation aborted
My Xperia S is already 4.0.4
Can anyone tell me how to solve this
Use the Xperia speed kernel
where can i get Xperia speed kernel
http://forum.xda-developers.com/showthread.php?p=28510568
LuisCarlosHK said:
I just unlocked bootloader and flash ICS kernel to Advanced Stock ICS Kernel
When I tried to flash KA10 Xperia SSpeed in the recovery mode, it said installation aborted
My Xperia S is already 4.0.4
Can anyone tell me how to solve this
Click to expand...
Click to collapse
Maybe a corrupted file download?? And you need Aroma Installer to install the rom.
I solved
First, flash Doomkernel for flashing the rom.
Then flash ICS kernel.
I have a mini pro and have just installed the latest Nobody at all kernel and have tried to install the rom but I get an error. I have followed all the instructions and even tried a few different SD cards. I really don't know what I am doing wrong? Here is the message I am getting on the phone:
finding update
opening update package
installing update
assert failed: is_substring("2.6.3 2.60nAa", getprop("ro.kernel.version"))
E:Error in /sdcard/MiniCM10-4.1.0-mimmi.zip
(Status 7)
Installation aborted
If anyone could help I would be really grateful.
Many thanks
marada123 said:
I have a mini pro and have just installed the latest Nobody at all kernel and have tried to install the rom but I get an error. I have followed all the instructions and even tried a few different SD cards. I really don't know what I am doing wrong? Here is the message I am getting on the phone:
finding update
opening update package
installing update
assert failed: is_substring("2.6.3 2.60nAa", getprop("ro.kernel.version"))
E:Error in /sdcard/MiniCM10-4.1.0-mimmi.zip
(Status 7)
Installation aborted
If anyone could help I would be really grateful.
Many thanks
Click to expand...
Click to collapse
Do you have x10 mini pro or mini pro?! If you have mini pro you are in wrong forum.
Sent from my LT26i using xda app-developers app
marada123 said:
I have a mini pro and have just installed the latest Nobody at all kernel and have tried to install the rom but I get an error. I have followed all the instructions and even tried a few different SD cards. I really don't know what I am doing wrong? Here is the message I am getting on the phone:
finding update
opening update package
installing update
assert failed: is_substring("2.6.3 2.60nAa", getprop("ro.kernel.version"))
E:Error in /sdcard/MiniCM10-4.1.0-mimmi.zip
(Status 7)
Installation aborted
If anyone could help I would be really grateful.
Many thanks
Click to expand...
Click to collapse
This is not the place to ask questions, do that in the x10mini questions and answers section of this forum.
The answer to that is however already given in the MiniCM10 RBAP.
The latest kernel is 2.6.32.61, so you need to change that line in the updater-script that searches for 2.6.32.60, or you flash it on the previous kernel (nAa-05-2.6.32.60) and then flash the new kernel.
SmG67 said:
This is not the place to ask questions, do that in the x10mini questions and answers section of this forum.
The answer to that is however already given in the MiniCM10 RBAP.
The latest kernel is 2.6.32.61, so you need to change that line in the updater-script that searches for 2.6.32.60, or you flash it on the previous kernel (nAa-05-2.6.32.60) and then flash the new kernel.
Click to expand...
Click to collapse
Many thanks for this. I changed the line in the script and it worked. I had spent all day trying to get this to work so am very grateful.
Many thanks
Hi everyone I just bought a xperia mini and I rooted,unlocked bl,flashed custom kernel,and now trying to install a custom rom(its nobodyatall jelly bean) and I get "ERROS STATUS 7 INSTALLATION ABORTED
What can I do to flash it successfully?
P.S. I followed all instructions correctly
I have flashed numerous custom roms on other devices but now I have this prob for first time
Sent from my Optimusx4 using Tapatalk 4 Beta
May b you have to try another version or higher of SOC and CWM.
GRG13 said:
Hi everyone I just bought a xperia mini and I rooted,unlocked bl,flashed custom kernel,and now trying to install a custom rom(its nobodyatall jelly bean) and I get "ERROS STATUS 7 INSTALLATION ABORTED
What can I do to flash it successfully?
P.S. I followed all instructions correctly
I have flashed numerous custom roms on other devices but now I have this prob for first time
Sent from my Optimusx4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The Updater-script in nAa's JellyBean ROM checks for the kernel-version. in this case 2.6.32.60 for example. The latest kernel however (nAa-06) has version number 2.6.32.61, which causes the script to fail (Error status 7).
You can either: Change the kernel to an older version, install the ROM and then flash the latest kernel, or: Change the updater-script to reflect the new kernel-version (ie, change 2.6.32.60 to 2.6.32.61).
This issue is well documented and has been answered in both the RBAP and in the ROM-thread.