hi guys, im trying to test the new 002 test version of OXP ICS rom by paul-xxx, and im trying to flash the nAa ics kerlen by stelios97, and everyone has successfully flashed, but i got a error in flashtool: Error flashing. Aborted.
what i do?
thx
brucestrela said:
hi guys, im trying to test the new 002 test version of OXP ICS rom by paul-xxx, and im trying to flash the nAa ics kerlen by stelios97, and everyone has successfully flashed, but i got a error in flashtool: Error flashing. Aborted.
what i do?
thx
Click to expand...
Click to collapse
You did wrong somewhere. You should do the steps properly and you will get it in right place. BTW where did you find the kernel. Can you give me the link
Sent from my E10i using XDA
I also have problems with flashing the ICS kernel, but this is what I get:
Code:
17/051/2012 16:51:48 - ERROR - (X10flash.java:349) - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Failed to init erase";
I can flash any other kernel without problems, I have tried to redownload the the kernel file, update to latest Flashtool and tried flashing it using another computer, and I still get this error
here: http://www.mediafire.com/?ish1obpr8mtxdh6
any other kernel flash normally, just this one don't flash
good luck~
Related
hi all,
i am very big trouble.....
i had stock rom installed on my x10i.....after reading a lot about ThGo2 v17.0 rom i decided to install it (not the first rom i installed).....
after following all the steps i.e
1. flashing the th_kernel provided
2. booting to xrecovery and installing the custom rom provided and addons....
the phone did start but was very laggy so i decided to shift to stock kernel and flashed it using flashtool but the flashtool got stuck at 2% and said aborting flash...
so i disconnected the phone and now i am not able to flash any firmware or kernel
plz help as soons as possible
update...
just found out that thGo2 rom made my device xperia arc aka i was in the about phone setting in my rom and found that the phone is not listed as x10i as it should be... it is listed as s0-01c aka xperia arc
rohit25 said:
hi all,
i am very big trouble.....
i had stock rom installed on my x10i.....after reading a lot about ThGo2 v17.0 rom i decided to install it (not the first rom i installed).....
after following all the steps i.e
1. flashing the th_kernel provided
2. booting to xrecovery and installing the custom rom provided and addons....
the phone did start but was very laggy so i decided to shift to stock kernel and flashed it using flashtool but the flashtool got stuck at 2% and said aborting flash...
so i disconnected the phone and now i am not able to flash any firmware or kernel
plz help as soons as possible
Click to expand...
Click to collapse
Cant you enter into flashmode????
Question
Need More details:
1)Locked or Unlocked Bootloader?
2)Which stock kernel you flashed? Downloaded from?
3)[If Locked Bootloader] Can you enter xrecovery? If can, make full wipe, clear cache partition, install new ROM via "install custom zip from SDcard.
4)[If Unlocked Bootloader] Try flash some custom Kernel for Unlocked bootloader like DooMKernel, see whether it reach recovery mode or not.
Sincerely,
whitefang
If can, pls kindly hit thanks button as an appreciation
YES
THeLogiC said:
Cant you enter into flashmode????
Click to expand...
Click to collapse
yes i can enter the flashmode but as i connect the phone via the usb cable the flashtool displays
flashing started
flashing ending
ERROR
not a noob
whitefang3456 said:
Need More details:
1)Locked or Unlocked Bootloader?
2)Which stock kernel you flashed? Downloaded from?
3)[If Locked Bootloader] Can you enter xrecovery? If can, make full wipe, clear cache partition, install new ROM via "install custom zip from SDcard.
4)[If Unlocked Bootloader] Try flash some custom Kernel for Unlocked bootloader like DooMKernel, see whether it reach recovery mode or not.
Sincerely,
whitefang
If can, pls kindly hit thanks button as an appreciation
Click to expand...
Click to collapse
the bootloader is unlocked
the kernel flashed was X10_2.3.3_Th_kernel-n1.1-BootManager-v2.0
the rom installed was ThGo2 v17
no i am not able to flash to any other kernel.... but i am able to enter flashmode
it says error in flashtool
THE ROM MADE MY PHONE PHONE SO-01C AS THE MODEL NUMBER IN SETTINGS ABOUT PHONE....
so i am getting forece close when try repairing my phone using seus
Download 2.3.3 stock firmware and flash it through flashtool
Sent from my X10i
didnt work
THeLogiC said:
Download 2.3.3 stock firmware and flash it through flashtool
Sent from my X10i
Click to expand...
Click to collapse
i already did that have a repository of all the roms and kernel on my hdd.....didnt work though
so went to the blog and updated my kernel from thjap.org... turns out every1 was compalining of the rom being laggy and the kernel used was older version so updated it and then came back to FXP125.....
the BEST rom out there :victory:
anyway a BIG THANKS 2 ALL
rohit25 said:
i already did that have a repository of all the roms and kernel on my hdd.....didnt work though
so went to the blog and updated my kernel from thjap.org... turns out every1 was compalining of the rom being laggy and the kernel used was older version so updated it and then came back to FXP125.....
the BEST rom out there :victory:
anyway a BIG THANKS 2 ALL
Click to expand...
Click to collapse
yes cm7.2 is great
Phone info:
WT19i || rooted || unlocked bootloader || cwm
android 2.3.4
stock rom
x kernel
build 4.0.2.A.0.58
downloaded latest nightly CM from here: http://www.get.cm/?device=coconut&type=nightly
confused which kernel to download from here: http://forum.xda-developers.com/showpost.php?p=24553704&postcount=75
I'm a bit confused. Can you please help me?
Please correct me if this is wrong...
Steps I'm about to take:
Flash rage kernel -> then flash cm7. (or do i need to reflash stock kernel first?)
Questions:
- Can I flash kernel and rom from CWM?
- Will I lose my root/cwm when I do the steps?
- If I accidentally flash a kernel that is incompatible with the rom what would happen?
- Any list of kernels that works well with CM7?
Thanks for helpers.
Help. I'm having a hard time installing rage kernel 2.9 for FXP, after I flash it. It won't boot and it won't enter recovery mode. Because of that, I can't install the cm7.2 rom. For now I went back to X kernel. x______X Help please?
Or do I install the rom first before the kernel? Help pleaseee...
Edit: Nvm, fixed it. Found the solution on the original Rage kernel thread
- "If you used KRsH Kernel or X kernel before you need to restore /system/lib/modules/ with stock files. Or just simply flash this: signed-mango_stock_modules.zip (2.3.4) or this ics_wifi_modules-signed.zip (4.0.4) via recovery."
nethoinkz said:
Phone info:
WT19i || rooted || unlocked bootloader || cwm
android 2.3.4
stock rom
x kernel
build 4.0.2.A.0.58
downloaded latest nightly CM from here: http://www.get.cm/?device=coconut&type=nightly
confused which kernel to download from here: http://forum.xda-developers.com/showpost.php?p=24553704&postcount=75
I'm a bit confused. Can you please help me?
Please correct me if this is wrong...
Steps I'm about to take:
Flash rage kernel -> then flash cm7. (or do i need to reflash stock kernel first?)
Questions:
- Can I flash kernel and rom from CWM?
- Will I lose my root/cwm when I do the steps?
- If I accidentally flash a kernel that is incompatible with the rom what would happen?
- Any list of kernels that works well with CM7?
Thanks for helpers.
Click to expand...
Click to collapse
- Kernel can only be installed via fastboot, read forum or my tutorial for more info. For better battery life, use Rage Kernel 2.7 from that topic. ROM needs to be installed via Recovery.
- Root and CWM are included in the kernel already, no need to worry about that.
- Bootloop.
- That Rage Kernel and the original kernel provided with the ROM(in .zip file).
nethoinkz said:
Help. I'm having a hard time installing rage kernel 2.9 for FXP, after I flash it. It won't boot and it won't enter recovery mode. Because of that, I can't install the cm7.2 rom. For now I went back to X kernel. x______X Help please?
Or do I install the rom first before the kernel? Help pleaseee...
Edit: Nvm, fixed it. Found the solution on the original Rage kernel thread
- "If you used KRsH Kernel or X kernel before you need to restore /system/lib/modules/ with stock files. Or just simply flash this: signed-mango_stock_modules.zip (2.3.4) or this ics_wifi_modules-signed.zip (4.0.4) via recovery."
Click to expand...
Click to collapse
These modules are only related to WiFi.
First install the kernel, else you cannot install the ROM in Recovery.
Make sure your bootloader is unlocked, then install the kernel via fastboot, then enter Recovery(already in kernel, no need to install) and install the ROM.
Hi I'm trying to install cm10 iv downloaded the zip for my ray and I'm trying to flash it in cwm and it keeps saying error (status7) what am i doing wrong this is my first time flashing a rom to my ray as iv only just unlocked my bootloader today please some one help me.
gavster26 said:
Hi I'm trying to install cm10 iv downloaded the zip for my ray and I'm trying to flash it in cwm and it keeps saying error (status7) what am i doing wrong this is my first time flashing a rom to my ray as iv only just unlocked my bootloader today please some one help me.
Click to expand...
Click to collapse
There is a Q&A thread, please post your question there, or in the cm10 thread.
That aside I googled it anf found this:
"If you are trying to flash a new ROM in CWM recovery and you get a failure due to a (Status: 7) error, the reason is because you are either trying to flash the wrong ROM (ie: GSM Version of the ROM) or MOST LIKELY you have installed the GSM CWM Recovery on your CDMA phone.
CWM will check to make sure that in the update.zip will be named correctly to either toro or the GSM version, if the other version is there, it will flag it and not flash.
Hope I was able to help!"
Maybe is your ray ST18a and not ST18i? Or you downloaded a wrong rom?
Wechy77 said:
There is a Q&A thread, please post your question there, or in the cm10 thread.
That aside I googled it anf found this:
"If you are trying to flash a new ROM in CWM recovery and you get a failure due to a (Status: 7) error, the reason is because you are either trying to flash the wrong ROM (ie: GSM Version of the ROM) or MOST LIKELY you have installed the GSM CWM Recovery on your CDMA phone.
CWM will check to make sure that in the update.zip will be named correctly to either toro or the GSM version, if the other version is there, it will flag it and not flash.
Hope I was able to help!"
Maybe is your ray ST18a and not ST18i? Or you downloaded a wrong rom?
Click to expand...
Click to collapse
my ray is st18i deffanantly i downloaded urushi thats the wright one. and my cwm is nAas off se xtream tweeker
gavster26 said:
my ray is st18i deffanantly i downloaded urushi thats the wright one. and my cwm is nAas off se xtream tweeker
Click to expand...
Click to collapse
I don't use CM10. Please aska a question in cm10 thread. There can more people help you.
I have another idea: in cm roms is boot.img in zip. Did you flashed this or sirkay's JB kernel before you flash a rom in cwm?
gavster26 said:
Hi I'm trying to install cm10 iv downloaded the zip for my ray and I'm trying to flash it in cwm and it keeps saying error (status7) what am i doing wrong this is my first time flashing a rom to my ray as iv only just unlocked my bootloader today please some one help me.
Click to expand...
Click to collapse
This is what I do when I get a status 7 error. It works every time
1. Flash stock ftf file using flashtool
2. Boot once
3. Flash CM10 kernel using fastboot or flashtool.
4. Do full wipe
5. Install ROM from zip.
Sent from my Xperia Ray using xda app-developers app
Wechy77 said:
I don't use CM10. Please aska a question in cm10 thread. There can more people help you.
I have another idea: in cm roms is boot.img in zip. Did you flashed this or sirkay's JB kernel before you flash a rom in cwm?
Click to expand...
Click to collapse
yeas boot image is in file. im new here im from the x8 fourms and everything is so much more complex lol.
all soted now peeps i just flashed stock kernel with doomlords cwm 6 + root and it installed straght away thanks for your help
Hi everyone I just bought a xperia mini and I rooted,unlocked bl,flashed custom kernel,and now trying to install a custom rom(its nobodyatall jelly bean) and I get "ERROS STATUS 7 INSTALLATION ABORTED
What can I do to flash it successfully?
P.S. I followed all instructions correctly
I have flashed numerous custom roms on other devices but now I have this prob for first time
Sent from my Optimusx4 using Tapatalk 4 Beta
May b you have to try another version or higher of SOC and CWM.
GRG13 said:
Hi everyone I just bought a xperia mini and I rooted,unlocked bl,flashed custom kernel,and now trying to install a custom rom(its nobodyatall jelly bean) and I get "ERROS STATUS 7 INSTALLATION ABORTED
What can I do to flash it successfully?
P.S. I followed all instructions correctly
I have flashed numerous custom roms on other devices but now I have this prob for first time
Sent from my Optimusx4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The Updater-script in nAa's JellyBean ROM checks for the kernel-version. in this case 2.6.32.60 for example. The latest kernel however (nAa-06) has version number 2.6.32.61, which causes the script to fail (Error status 7).
You can either: Change the kernel to an older version, install the ROM and then flash the latest kernel, or: Change the updater-script to reflect the new kernel-version (ie, change 2.6.32.60 to 2.6.32.61).
This issue is well documented and has been answered in both the RBAP and in the ROM-thread.
Hi , i encounter error with flashing cyanoged based custom rom. I m on JB 4.1.2 neatromlite and kernel speedmod JB
always get error on buildprop, error 7 on cwm
please help
The file is corrupted. Check the md5
Sent from my Sensation XL using Tapatalk 4
ur zip would be corrupt download again n check md5
amdultra said:
Hi , i encounter error with flashing cyanoged based custom rom. I m on JB 4.1.2 neatromlite and kernel speedmod JB
always get error on buildprop, error 7 on cwm
please help
Click to expand...
Click to collapse
What version of CM is it your trying to flash?
sorry for late answer , i try to clean my rom using nuke script and it solve the problem
Flash latest philz kernel and try again. Cwm needs updating on error status 7.