I've noticed few people like me having this issue. I have tried every cm and aokp/aosp Rom available. Every one gives me no data. I know it's related to the phone.android fc'ing. Every dev says it only shows up once, but for me it's every time the radio tries to connect. It's instant and immediately kills my data. I've done pretty much everything to fix it. Tried 3g only even, no dice. The only thing i can connect to is WiFi.
Who else has this issue? And does anyone have a fix? As soon as I'm back on a sense Rom, everything is great.
Sent from my EVO LTE.
Wow. Ok then.....lol!
I have the same issue,I will sometimes get 3g, very hit or miss and no lte. I see 4g before the phone error pops up, then it's gone forever.
Sent from my EVO using XDA Premium HD app
regalpimpin said:
I have the same issue,I will sometimes get 3g, very hit or miss and no lte. I see 4g before the phone error pops up, then it's gone forever.
Sent from my EVO using XDA Premium HD app
Click to expand...
Click to collapse
Yep, exact same problem here. What hw version are you? Also what hboot do you have? Son or off?
Sent from my EVO LTE.
I had some data issues on AOSP ROMs as well, a ##786# reset solved them for me.
Flash a Sense ROM, input ##786# in the dialer, select Menu --> Restore (it's a factory restore), enter your MSL and wait for the phone to reboot. after booting, the phone will perform an OTA activation, just as if it was new. this method was the only one that got me 3G on CMX, though it may or may not work for you.
good luck!
miguelfp1 said:
I had some data issues on AOSP ROMs as well, a ##786# reset solved them for me.
Flash a Sense ROM, input ##786# in the dialer, select Menu --> Restore (it's a factory restore), enter your MSL and wait for the phone to reboot. after booting, the phone will perform an OTA activation, just as if it was new. this method was the only one that got me 3G on CMX, though it may or may not work for you.
good luck!
Click to expand...
Click to collapse
ok I'll try that in a few.
Sent from my EVO LTE.
I usually toddle data on/off and roaming on/off wile set to 3g only. This method almost always works for me. When I get a solid connection I then switch to 3g/lte and most of the time I can hold a data connection. Gotta say once I connect I don't lose data
Sent from my EVO using xda app-developers app
##786# appears to have mostly worked for me. I still have occasional issues, but as stated once data is connected it holds for the most part. Thanks for the help.
Sent from my EVO LTE.
jlechner said:
##786# appears to have mostly worked for me. I still have occasional issues, but as stated once data is connected it holds for the most part. Thanks for the help.
Sent from my EVO LTE.
Click to expand...
Click to collapse
not a problem, glad to have helped
Related
I have an Evo 4g Lte, that I only use as a wifi device. Cellular isn't activated on it. Anyway ... I removed the Dialer from the homepage, thinking I could always replace it from the apps or whatever. The problem is ... I used the dialer to turn off the cell radio, by dialng *#*#4636#*#* ... But after actually powering down the device. I turned it back on and the cell radio is back on. I expected that part. But now I don't have access to the dialer.
The only thing I can think of at this point is a factory reset.
Any ideas?
netjnke said:
I have an Evo 4g Lte, that I only use as a wifi device. Cellular isn't activated on it. Anyway ... I removed the Dialer from the homepage, thinking I could always replace it from the apps or whatever. The problem is ... I used the dialer to turn off the cell radio, by dialng *#*#4636#*#* ... But after actually powering down the device. I turned it back on and the cell radio is back on. I expected that part. But now I don't have access to the dialer.
The only thing I can think of at this point is a factory reset.
Any ideas?
Click to expand...
Click to collapse
The dialer isn't in your app drawer?
fpineda101 said:
The dialer isn't in your app drawer?
Click to expand...
Click to collapse
Nope
Yeah factory reset or flash a rom
Sent from my EVO using xda premium
Turned out I had the People app disabled... which in turn disabled the Phone app.
I currently use cm10 as my dd. Flashed back to Sense (meanrom) to do a ##3282# > data profile > restore in an attempt to fix some minor 3G issues. After restoring and rebooting, the hands free activation never started. Tried a manual profile and prl update with little luck. Currently, I have no 3G signal. I was able to get 3G back very temporarily after doing a ##72786# >menu > reset; however, it would only work in LTE/CDMA mode and would usually drop-off very quickly. Tried reverting back to AOSP and data was still gone. Has anyone experienced this? Is there something else that Sprint has to do on their end?
I had the same problem no 3g for a week then I went to a repair sprint center, the guy said it was the phone wish I had uprooted before going in. He did all the firmware update and nothing, knew it was the phone cauz i did the ##786# and was not doing anything because I had no data. Anyway sprint gave me a new one for 35$.which suck because came with the new hboot 1.15.
Sent from my EVO using xda premium
Here are a couple more observations. On a sense ROM, I can get 3G as long as I keep it on LTE/CDMA and not CDMA only. Once i switch it, it immediately disconnects. When I switch over to CM10 I get no 3G at all regardless if I am using LTE/CDMA/EvDo or CDMA/EvDo auto. Also, when I am connected to my airave I am unable to get any type of 3G regardless of the mode that I am on. Is there a setting within "data profile" that is preventing me from connecting to "cdma only"?
Tried two additional things with no success - 1. Switched to cdma only and tried updating profile. 2. ##72786# to reset data.
There shouldn't be an issue with cmx other then having to switch to CDMA/auto. Try switching to CDMA auto and immediately reboot the phone and let it just sit for about 5-10 minutes it sounds bad but its not these are nighties and it will be fixed soon enough
Is the active profile set on 1? I had the same problem, and I was able to get data back by doing a profile update over WiFi..
Sent from my EVO using xda premium
aimbdd said:
Is the active profile set on 1? I had the same problem, and I was able to get data back by doing a profile update over WiFi..
Sent from my EVO using xda premium
Click to expand...
Click to collapse
you sir fixed my issue...thank you!!!! Hit a roadblock with a "vDM stopped unexpectedly" error which prevented me from updating profile. Flashed a nandroid, changed data profile to 1, updated profile over wifi and it worked. Can switch between cdma and lte without a problem. Flashed CMX again and 3G connected right away. Thanks again!
I was playing with the *#*#4636#*#* menu in CMX and changed my band to Australia. I then lost all connectivity but wifi. I figured I'd just nandroid back to my fully functioning CMX - I was wrong. After restoring the nandroid, the phone still won't connect to anything but wifi.
I then saw this post and flashed meanbean to use the Sense dialer.
None of the instructions worked! When I try to ##786# reset all my data, the phone will do its thing and then boot back up into meanbean and ask me sign in to my accounts.
The DEVICE_PROVISIONED=1 doesn't exist in my build.prop as seen in this post so I can't use the simple method. :crying:
Any help is greatly appreciated. I only have wifi while I'm at work, so in 5 hours I'll be screwed.
EDIT: Almost fixed it! I nandroided back to CMX and tinkered with some more advanced settings. I figured I can't hurt anything more than I have. It's now connecting to the network and 3G, but says it needs activated. Finally, progress!
david black said:
I was playing with the *#*#4636#*#* menu in CMX and changed my band to Australia. I then lost all connectivity but wifi. I figured I'd just nandroid back to my fully functioning CMX - I was wrong. After restoring the nandroid, the phone still won't connect to anything but wifi.
I then saw this post and flashed meanbean to use the Sense dialer.
None of the instructions worked! When I try to ##786# reset all my data, the phone will do its thing and then boot back up into meanbean and ask me sign in to my accounts.
The DEVICE_PROVISIONED=1 doesn't exist in my build.prop as seen in this post so I can't use the simple method. :crying:
Any help is greatly appreciated. I only have wifi while I'm at work, so in 5 hours I'll be screwed.
EDIT: Almost fixed it! I nandroided back to CMX and tinkered with some more advanced settings. I figured I can't hurt anything more than I have. It's now connecting to the network and 3G, but says it needs activated. Finally, progress!
Click to expand...
Click to collapse
There's a setting in there that says profile=0 change it to 1 if it isnt already
Sent from my EVO using Tapatalk 2
luigi311 said:
There's a setting in there that says profile=0 change it to 1 if it isnt already
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
...or move to Australia.
Seriously, I have no clue other than what I just read in the threads you posted. I hope you're able to get it figured out.
Sent from my EVO using xda premium
buzzwyzr said:
...or move to Australia.
Seriously, I have no clue other than what I just read in the threads you posted. I hope you're able to get it figured out.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thanks guys, I did get it fixed. Once I got some sort of connection reestablished I needed to activate the phone. I called Sprint customer service from my work phone and they refreshed all my data/connections. That allowed me to connect to the network, but not use it (if that makes any sense). I then downloaded the deodexed stock rooted JB ROM from here. After flashing that and booting into it, it said "hands free activation" and then starting updating the PRL before asking me to set up my accounts.
Hopefully my story helps anyone who gets caught up in this issue.
One more thing, upon reinstalling my cmx nandroid, I checked the build.prop file and it had the DEVICE_PROVISIONED=1
I changed it and that's how I got the phone to reconnect to the network (still no use of the signal though at that moment). That's when I flashed to the stock rooted ROM and everything was fine from there.
Sent from my EVO using Tapatalk 2
Hi I have been having an Odd issue with LTE and every time I switch from CDMA to CDMA +LTE/Evdo or similar to that, my phone constantly reboots when it tries to connect to LTE.
I have to airplane mode as soon as I can before it reboots again and then go back to CDMA only very quickly.
On Sense ROMs I get an error code saying it couldn't connect or so, been some time since last sense ROM.
I'm currently running SOKP and baseband says unknown in settings. Any and all help is greatly appreciated.
Also, I've been on NPL with latest radio since first release of new update, but the issue only appeared in the last few weeks.
Link420able said:
Hi I have been having an Odd issue with LTE and every time I switch from CDMA to CDMA +LTE/Evdo or similar to that, my phone constantly reboots when it tries to connect to LTE.
I have to airplane mode as soon as I can before it reboots again and then go back to CDMA only very quickly.
On Sense ROMs I get an error code saying it couldn't connect or so, been some time since last sense ROM.
I'm currently running SOKP and baseband says unknown in settings. Any and all help is greatly appreciated.
Also, I've been on NPL with latest radio since first release of new update, but the issue only appeared in the last few weeks.
Click to expand...
Click to collapse
I'd suggest flashing a sense ROM and giving the ##72786# reset a try. Or at the very least, flash sense and update your PRL and profile. Not sure why it's causing a reboot though, never heard of that before. Best to try the reset as you won't lose any data and it will update PRL and profile automatically. Flash sense, dial ##72786# from dialer and select reset from the menu.
Sent from my EVO using XDA Premium 4 mobile app
Evolution_Freak said:
I'd suggest flashing a sense ROM and giving the ##72786# reset a try. Or at the very least, flash sense and update your PRL and profile. Not sure why it's causing a reboot though, never heard of that before. Best to try the reset as you won't lose any data and it will update PRL and profile automatically. Flash sense, dial ##72786# from dialer and select reset from the menu.
Sent from my EVO using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks. I'll try that and post the results
Link420able said:
Thanks. I'll try that and post the results
Click to expand...
Click to collapse
Well after flashing ViperRom and doing the code in dialer, reset managed to update prl and profile while was failing before. LTE connects now and works, I'm not sure how it got corrupted though
I do not have any data or voice connection. My phone is just a digital phone book at the moment. Early Monday morning around 2am the phone was working fine I had voice and data. Around 4am I look at my phone and there is an X above the signal bars.
So far I have tried dialer codes- the phone seems it does not recognize them, nothing happens (the view and edit modes do not come up)
soft reset, hard reset
Restoring a back up-no luck
Run the newest 4.3 RUU-no luck had data for a few seconds then gone again
Tired running ViperRUU-still no luck
I also tried to call Sprint but as usual they were no help
My phone is Locked but S-off
Hboot 2.10
Radio 1.13.11.1105
Nick4208 said:
I do not have any data or voice connection. My phone is just a digital phone book at the moment. Early Monday morning around 2am the phone was working fine I had voice and data. Around 4am I look at my phone and there is an X above the signal bars.
So far I have tried dialer codes- the phone seems it does not recognize them, nothing happens (the view and edit modes do not come up)
soft reset, hard reset
Restoring a back up-no luck
Run the newest 4.3 RUU-no luck had data for a few seconds then gone again
Tired running ViperRUU-still no luck
I also tried to call Sprint but as usual they were no help
My phone is Locked but S-off
Hboot 2.10
Radio 1.13.11.1105
Click to expand...
Click to collapse
You didn't mention what's rom you are running but the dialer codes only work on sense based roms.
Sent from my EVO using XDA Premium 4 mobile app
Yeah I forgot to mention I am running Viper 4.0
Nick4208 said:
Yeah I forgot to mention I am running Viper 4.0
Click to expand...
Click to collapse
Have you tried the hands free activation?
Sent from my EVO using XDA Premium 4 mobile app
Try ##72786#, then select reset from the menu once it pops up. If that doesn't work, do ##3282# and hit reset. You'll need your MSL code to do this. You can call Sprint and get it or use the free MSL reader app from the Play store. You have to be on a Sense ROM to use dialer codes.
Edit: Saw where you tried the dialer codes already. You'll need a ROM with EPST support to use them. Hit up my Q&A thread for the Sense 5.5 ROM-one of the FAQ's in the second post explains how to do this.
Sent from my HTC device
gstanke said:
Have you tried the hands free activation?
Sent from my EVO using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah I have that didnt work.
Magnum_Enforcer said:
Try ##72786#, then select reset from the menu once it pops up. If that doesn't work, do ##3282# and hit reset. You'll need your MSL code to do this. You can call Sprint and get it or use the free MSL reader app from the Play store. You have to be on a Sense ROM to use dialer codes.
Edit: Saw where you tried the dialer codes already. You'll need a ROM with EPST support to use them. Hit up my Q&A thread for the Sense 5.5 ROM-one of the FAQ's in the second post explains how to do this.
Sent from my HTC device
Click to expand...
Click to collapse
I thought Viper 4.0 support EPST? I will try to restore my Sense 5.5 back up and try again. But when I try to use the dialer codes they don't work. I can enter the code but it seems like the dialer freezes and it doesn't take the code. I have to hit the home button to get out of the frozen dialer.
Nick4208 said:
Yeah I have that didnt work.
I thought Viper 4.0 support EPST? I will try to restore my Sense 5.5 back up and try again. But when I try to use the dialer codes they don't work. I can enter the code but it seems like the dialer freezes and it doesn't take the code. I have to hit the home button to get out of the frozen dialer.
Click to expand...
Click to collapse
1. Turn on the airplane
2. Go into settings and into the auto setup thingy. I forget what exactly it's called in that ROM, but it's almost always right above the software updates section. After it tries for a few seconds, hit the home button.
3. Now go to apps and under "all", find "phone". Clear it's cache/data
4. Right afterwards, and with airplane still on, reboot your phone.
This probably won't fix your problem, but should reset the godonlyknowswhat so that ##SCRTN# & ##DATA# are again recognized by your phone (assuming you're on a sense-based ROM).
I had this exact same problem and that fixed it (well the dialer problems anyway). Not 100% sure why either.
fizbanrapper said:
1. Turn on the airplane
2. Go into settings and into the auto setup thingy. I forget what exactly it's called in that ROM, but it's almost always right above the software updates section. After it tries for a few seconds, hit the home button.
3. Now go to apps and under "all", find "phone". Clear it's cache/data
4. Right afterwards, and with airplane still on, reboot your phone.
This probably won't fix your problem, but should reset the godonlyknowswhat so that ##SCRTN# & ##DATA# are again recognized by your phone (assuming you're on a sense-based ROM).
I had this exact same problem and that fixed it (well the dialer problems anyway). Not 100% sure why either.
Click to expand...
Click to collapse
Thanks, That got the dialer codes working, not all the time but few times so I can enter the codes. Now It will not do the hands free connection. 1012 is the error code coming up. I think I'm going to bite the bullet and bring it into a sprint repair store, and hopefully its something easy to fix
Well the damn Sprint repair store was closed. But I was able to finally fix my phone. I used the ##786# dialer code and did a factory reset. Thank you everyone for the help.