I have been trying to use some roms but every rom I install I dont get the notification bar. is there something i am missing as all I do is put the rom on SD card boot into clockwork mod and install using zip on SD and the if mod asks for a data wipe then i do it but if I do that the build never loads I left longhorn 2.9.3 for about 3hrs and never worked.then if I dont wipe then It loads into the rom with problems.
how bout trying using dsc 1.0 ? flash it using streakmod recovery .. and then do wipe data , wipe cache, wipe dalvik cache , fix permissions and do dell factory default ...
deysmacro said:
how bout trying using dsc 1.0 ? flash it using streakmod recovery .. and then do wipe data , wipe cache, wipe dalvik cache , fix permissions and do dell factory default ...
Click to expand...
Click to collapse
thank you so much that has worked but I did all the flashing with the clockwork mod guest streakmod works better
many many thanks
:good::good:
Related
Ok, mi problem is that when i try to install an app the phone freezes adn then it restarts, please help me!!!, I wipe data/dalvik-cache/battery status before installing it via CWM
art111 said:
Ok, mi problem is that when i try to install an app the phone freezes adn then it restarts, please help me!!!, I wipe data/dalvik-cache/battery status before installing it via CWM
Click to expand...
Click to collapse
Try whiping Dalvik cache after the install, then a couple of reboots. Fixed it for me.
art111 said:
Ok, mi problem is that when i try to install an app the phone freezes adn then it restarts, please help me!!!, I wipe data/dalvik-cache/battery status before installing it via CWM
Click to expand...
Click to collapse
Same problem here, any solution?
After installation wipe davik cache like TimmyHate say. If stil didnt work do ful wipe (factory reset) and reboot cuple of time
Sent from my U20i using XDA Premium App
After 3 or 4 failed installations this was how i make it work
StockRom->Cyanocomb as always->finish the setup reboot 2 o 3 times->go to Cwrecovery->Wipe Cache and dalvik,also factory reset, reboot 2 o 3 times
that's how i make it work
zurce said:
After 3 or 4 failed installations this was how i make it work
StockRom->Cyanocomb as always->finish the setup reboot 2 o 3 times->go to Cwrecovery->Wipe Cache and dalvik,also factory reset, reboot 2 o 3 times
that's how i make it work
Click to expand...
Click to collapse
Similar to what I do on most Rom's:
1) (After making CWM backup) Wipe EVERYTHING (Cache,Dalvik,Battery Stats and Factory Reset) prior to installing
2) Install ROM
3) Reboot, Allow to run for 5 minutes.
4) Reboot again, allow to run for 5 minutes
5) Reboot into Recovery, Wipe Cache and Dalvik.
6) Reboot, Allow to run for 5 minutes.
7) Reboot, Allow to start up fully to post Pin
8) Reboot one final time and your ready to rock.
The reason (my understanding, I could be wrong and if so, someone with the knowledge feel free to correct me) is that The multiple reboots helps to build the Davlik Cache which encourages stability, and the Wiping after installing the Rom ensures no leftover Junk from a previous ROM remained.
I have it to but i've changed rom to SonyBread4
Why don't you change to sonybread 4??? its android 2.3.4
the newest
Install cyanocomb 1.3 or make a factory reset
Sent from my mini pro running CyaNoComb by d4
Same problem
rebooting and clearing cache is not solution. only sonybread can solve that.
but sonybread does not have asian language pack
whisha said:
rebooting and clearing cache is not solution. only sonybread can solve that.
but sonybread does not have asian language pack
Click to expand...
Click to collapse
for me worked perfectly this way
1. load a backup of stock rom + root +cwm
2. wipe dalvik, cache and factory reset
3. flash cyanocomb 1.2
4. wipe dalvik, cache and factory reset
5. reboot phone
and for cyanocomb 1.3
6. wipe dalvik and cache
7. flash cyanocomb 1.3
8. wipe dalvik and cache
9. reboot phone and enjoy
hope it helps
just flashed my S2 via that:
___
Harder way:
Make sure you're running a rooted device.
Root your device and install ClockworkMod Recovery (http://forum.xda-developers.com/show....php?t=1118693)
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition) - do it for real.
Install the ROM from internal sdcard using ClockworkMod Recovery
___
but after I chose reboot it still is in the yellow triangle screen and nth is hap.
(more than 10 min)
that cant be good?
can I reflash via Odin?
If you can put your phone in download and Odin connects, yes you can try a stock kernal.
Go into CWM
Wipe data/cache
Wipe dalvik cache
reflash the CM7 zip.
wipe dalvik cache just worked awesome!!!
veyka said:
Go into CWM
Wipe data/cache
Wipe dalvik cache
reflash the CM7 zip.
Click to expand...
Click to collapse
THKS
works perfect
@veyka
figured it out myself and already posted it
(but not in this thread)
after flashing cm7 pre beta #2 for the atrix my for just sits in the motorola bootlogo. I can get back to recovery mode but I dont have any backups to restore from. Ive whipped the data and cache and reflashed it but it dont fix it. Is there a way to facotory restore or other options?
Thanks for any help
NWilz said:
after flashing cm7 pre beta #2 for the atrix my for just sits in the motorola bootlogo. I can get back to recovery mode but I dont have any backups to restore from. Ive whipped the data and cache and reflashed it but it dont fix it. Is there a way to facotory restore or other options?
Thanks for any help
Click to expand...
Click to collapse
Did you wipe the dalvik cache? If you didn't, go into recovery, then click advanced, then click wipe dalvik cache.
i whipped dalvik cache, still sits in the boot logo
NWilz said:
i whipped dalvik cache, still sits in the boot logo
Click to expand...
Click to collapse
Maybe you've had a bad install. Try wiping everything again, and then re-installing. After you've reinstalled, wipe everything again just for good measure.
This happened to me before, just download CM7 again onto your sd card and then go into your recovery menu and wipe dalvik, wipe cache, wipe data, then try reflashing the new CM7 zip you have on your sd card and reboot
Sent from my MB860 using Tapatalk
I think this maybe my problem
http://forum.xda-developers.com/showthread.php?t=1219956
cause I can only access my internal memory, but I have a bigger problem it says my battery is to low to flash and it doesnt seem to be charging. Iis there any mode under those options when you hold power and down volume that would charge the phone?
Try the method I posted on that thread to charge your phone, its a video on youtube that tells you how to.
hello.
Im trying to instal this rom.
i do wipe data, cache and dalvik cache.Format system and install zip.
thw phone doesnt reboor.......yellow triangle and turn off all the time.
can you help me?
santi666 said:
hello.
Im trying to instal this rom.
i do wipe data, cache and dalvik cache.Format system and install zip.
thw phone doesnt reboor.......yellow triangle and turn off all the time.
can you help me?
Click to expand...
Click to collapse
What are the instructions for installing the zip ???
As above try factory reset .
jje
the instructions are this:
1. Wipe data, cache and dalvik cache
2. Go to mounts and storage and format system
3. Flash Zip
Click to expand...
Click to collapse
I do it,exactly, some times.
the phone dont start, i show the yelow triangle screen and shut down (loop)
Flash another rom .
jje
All week I do a flash.
But I want this ROM.
Sent from my GT-I9100 using xda premium
Im currently using ver1.0 Pro but cannot seem to download any other versions after that.
I tried even Infinitum Project, i cant seem to get it pass the start screen.(meaning before the boot animation). Similar when flashing RR ver1.1 onwards
I think i cannot go anywhere after android 4.0.4. I am only able to flash back to v1.0 (Android 4.0.3).
what could be the problem? help?
can u explain the process you followed for the installation of the other roms after 1.0?
oh sorry.
For the RR Pro 1.3
full wipe
installed rom
reboot.
Infinatium project,
Full wipe
installed rom
installed gapps
installed themed gapps
reboot.
I would usually just follow the instructions that are given.
sorry too I were configuring my cellphone, just flashed to the 1.3 and works fine...
sometimes my sd card give me problems and I remove from the device, maybe it's not your case...
and additional to the wipe, I wipe the dalvik cache, and then install the rom.
In the roms in wich I got troubles with the start screen or rebooting its because the baseband (LPQ in my case) and I'm serching foward about these thing...
sorry about my english, but its not my native languaje
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
jonsim86 said:
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
Click to expand...
Click to collapse
Apart from asking the dev i suggest a full wipe and clean flash may cure the usual Kernel Panic .
jje
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
jonsim86 said:
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
Click to expand...
Click to collapse
wipe data,cache,dalvik cache and format system from mount and storage.
after installing also wipe cache and dalvik cache then reboot.hope this solves ur problem.
meaning to say i should delete everything in my storage and sd card? like format the memory?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
formatting system doesn't format ur sdcard data, it only
formats system folder.
sorry im quite a noob so... how do i format the system?
jonsim86 said:
sorry im quite a noob so... how do i format the system?
Click to expand...
Click to collapse
go to recovery mode then mount and storage and select format system.
giving it a try. Thanks
i just cant seem to install anything after v1.
from v1. siyah kernel v3.
did a data wipe
cache wipe
format system
divak wipe
install rom
install gapps fix
reboot
it just get stuck at start up before the bootanimation. why?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
yeap it just clears the system data, then you can do a clean flash from there. that should do it
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
jonsim86 said:
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
Click to expand...
Click to collapse
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Azure Flame Kite said:
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Click to expand...
Click to collapse
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
MyLifeRocks10 said:
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
Click to expand...
Click to collapse
If you just relax for a minute , take a deep breath and start from the beginning. Listen to what people are telling you. Follow step by step from the beginning. Read what the developer says on flashing the rom and then it will work. Almost impossible not to get the rom working after that. It will all come together mate. Read a lot of posts. Good luck.
Sent from my GT-I9100 using xda premium