Hello, i have a problem connecting my Samsung Galaxy 5.0 Player to my computer and lap-top.
I tried everything that is possible..
Debugigng is turned off.
When i put usb cable into computer error shows.
I tried with Voluem down and Power buton, and it's shows "Downloading.." and "Do not turn off Targer!!!" and nothing happens..
I also tried evey usb port on my computer and lap-top, and always same error..
Is there any to fix this?
Are you sure you have the drivers working on the computer? The best check is to put the player in Kies mode and see in Kies can connect. Not sure what to try after that
i had this happen to me and all i did was turn ON usb debugging and it magically recognizes the device.
i ran into this problem after i updated kies.
also try removing kies and just keeping the usb drivers
Related
Hey everyone,
So, I rooted and flashed my SGS2 back in july... everything went perfectly... but the Asus that I used to flash has been sold, and since I flash using CWM, not odin, I had not even realized this.... until I had to root and flash my mom's i9000m
My new HP is having a really hard time trying to detect any of my android devices. Here is what I tried:
- USB debugging is most certainly on
- Putting phone in download, plugging into laptop, letting install drivers - NOTHING in odin
- Finding the samsung usb mobile device drivers on tutorials on the internet - NOTHING in odin
- Installing kies, letting that install drivers - still nothing in odin or kies
- Try different USB port
- Try different USB cable
- Try pulling the battery and sim
It definitely is not the phone, because my SGS2, or my parents S vibrant or S captivate are detected by kies or odin. Also I can get a connection to storage when phone is on, ect.
Is there anything I missed? This new HP is starting to piss me off lol. Everything went to smoothly on the Asus.
did you turn off usb debugging. it interferes with the connection
settings - applications-development.
If I turn off USB debugging and enter kies mode while the phone is on (normally) it will say Connected...on the phone, but my laptop does not detect anything, kies is still waiting for a connection.
Ideally I want USB Debugging on, as I want to connect to odin, not kies. But as neither is working... I figured I would just see what I could get to connect.
SGS2 Connect
Power off phone
Install Kies
Power on phone start Kies connect Samsung USB cable .
Let Kies find phone .
NO
Then try Kies not running put phone in USB Mass storage mode connect cable wait for windows to find USB mass storage device and install drivers .
jje
Turns out there was an issue with my android SDK installation. Reinstalled it and re downloaded drivers. Everything works! Thread closed!
Thanks for the suggestions
So when i try to connect my galaxy to the computer nothing happens. i plug it in and it will start to charge but the phone will not have recognized the fact that it is connected to the computer and the computer doesnt even say "unrecognized device" how do i get the phone and omputer to recognize each other?
Did you install drivers for the phone? What operating system are you on?
yes i have. ive tried both osx and windows 7 and i have made sure to download teh drivers for each
Have you tried to connect it in usb debugging mode? (goto settings, applications, devlopment, check debugging mode?
(I dont know of it will help, but it would be the next thing I would try)
And try different usb ports. I have heard before that it can help.
yeah ive tried all of that it and still nothing, the switching usb ports too
Did you restart the computer after you installed drivers?
I would try installing Samsung Kies (from samsung website, GS2 support page). It also installs drivers and fixed a problem I had with connection.
If all these don't work, I don't know what to tell you. Sorry. I am sure someone here with more experience will be able to help.
yeah haha ive done all of these unfortunately and still nothing, thank you for you suggestions though
Kies had an update within the hour of New years (Pacific).
I discovered this morning that USB debugging mode MUST BE OFF for Kies to recognize and connect to the phone. I'm currently backing up my device in this mode right now.
"Kies Air" also works well, without having to worry about any USB issues.
"Droid Explorer" connects fine with debugging turned on. I have to wait until backup is complete to see if it works with debugging turned off.
I'm having USB port issues right now, so your mileage may vary.
Hope this helps.
Hi All,
I have recently got a new Galaxy S2 on VF UK and when I try and connect it to the Kies application, I keep getting the error message;
Reconnect the devise in Samsung Kies (PC Studio) Mode.
Current connection mode is not supported by Kies.
I have tried using the debug mode and does not resolve the issue.
Anyone else having the issue?
Cheers,
Dave.
I butted heads with Kies over time too
Did you perhaps turn on the USB mode so that the phone acts like its some USB drive? As for Kies you just plug it in without setting any mode.
If not...
I would suggest, to uninstall, and then reinstall Kies. Best download the latest version if you are not sure you have that one.
After the install don't start Kies.
First connect the phone to the computer, you don't have to put it into any mode, just plug it in. Down in the bottom right corner there should pop up some message about drivers being installed/configured.
When you get the message that it was all okay you unplug the phone.
Then start up Kies.
Then again plug in the phone.
If all goes well it should then it should recognize the phone.
I usually ran into trouble when the usb driver for the phone was not installed correctly, and having Kies on and having having the driver being configured would often result for me in drivers that had errors.
Mario387 said:
I butted heads with Kies over time too
Did you perhaps turn on the USB mode so that the phone acts like its some USB drive? As for Kies you just plug it in without setting any mode.
If not...
I would suggest, to uninstall, and then reinstall Kies. Best download the latest version if you are not sure you have that one.
After the install don't start Kies.
First connect the phone to the computer, you don't have to put it into any mode, just plug it in. Down in the bottom right corner there should pop up some message about drivers being installed/configured.
When you get the message that it was all okay you unplug the phone.
Then start up Kies.
Then again plug in the phone.
If all goes well it should then it should recognize the phone.
I usually ran into trouble when the usb driver for the phone was not installed correctly, and having Kies on and having having the driver being configured would often result for me in drivers that had errors.
Click to expand...
Click to collapse
Hi Mario387,
Thank you for your advise but I have tried what you have suggested and still having the same issue.
I don't think that I have set my devise to be a USB devise - how do I tell if I have it in the right mode?
Under the phoneutil the usb mode is PDA (*#7284#)
Any advise would be deeply appreciated
Cheers,
Dave.
try to turn off phone
take the battery off then put it back
reinstall kies
after installing kies connect usb wire at the main usb hub
then connect it to your phone
then turn it on.. hope it helps
Tried to connect it, drag down the pullbar, then clicking on the mtp-thingy. And then click "enable usb storage" ?
Hello, i have a problem connecting my Samsung Galaxy 5.0 Player to my computer and lap-top.
I tried everything that is possible..
Debugigng is turned off.
When i put usb cable into computer error shows.
I tried with Voluem down and Power buton, and it's shows "Downloading.." and "Do not turn off Targer!!!" and nothing happens..
I also tried evey usb port on my computer and lap-top, and always same error..
Is there any to fix this?
Sorry for my bad English.
PedjaxD said:
Hello, i have a problem connecting my Samsung Galaxy 5.0 Player to my computer and lap-top.
I tried everything that is possible..
Debugigng is turned off.
When i put usb cable into computer error shows.
I tried with Voluem down and Power buton, and it's shows "Downloading.." and "Do not turn off Targer!!!" and nothing happens..
I also tried evey usb port on my computer and lap-top, and always same error..
Is there any to fix this?
Sorry for my bad English.
Click to expand...
Click to collapse
Try downloading the Samsung Kies Software, then try plugging in your device. I'm not 100% sure, but I think the Kies software will download drivers for you. I'll try to look into some other solutions, but try Kies first. I hope it works for you.
Higgs_Boson said:
Try downloading the Samsung Kies Software, then try plugging in your device. I'm not 100% sure, but I think the Kies software will download drivers for you. I'll try to look into some other solutions, but try Kies first. I hope it works for you.
Click to expand...
Click to collapse
Either that or look for the samsung usb drivers package which is a seperate installer that will install drivers for any samsung device, i prefer using that over kies.
Hello. I have a problem. When i connect my SGSII to my pc it connects and disconect, and it repeats every second. I cant use usb mode. Charger works good, it charges ok via charger and usb. but problem is i cant connect my phone to pc. I tried to make factory reset,tryed on another pc and other usb cable but it doesnt helps. Please guys i need help.
My problem looks like this: http://www.youtube.com/watch?v=WEqL32bVEpQ
which udb mode is the phone in media or mass storage ?
try deleting and reinstalling the usb drivers.
me
i tried both usb modes and reinstall usb drivers, still doesnt help!