Hi to all
I have Samsung Galaxy S [i9000] and yesterday i`ve made update to [ROM][4.1.1] X-Bean 2.0
http://forum.xda-developers.com/showthread.php?t=1829256
Everything works fine but...
1) After that Kies cannot recognize phone after conection [in PC i see SD card and phone]
2) I have no idea how can I import my contacts.spb file to phone (I dont have google backup, only this file)
I`ve tried open that file in Kies, make "save as" and at end of name write .vcf [i see that in some thread] but nothig happened....
Please help and sorry for my english
Related
Hi,
I have updated my O2 XDA ROM ver 3.something to 4.00.16 T-Mobile(withProgrammA) and sence then I am unable to update it anymore. The Active sync is working fine with the USB connection, but the ProgrammeA is saying: error getting connnectiontype. I have try it on 2 different computers under w2k and wxp, the problem was the same.
I would like to upgrade it cos is frosing dayly, and the xda-developers ROM was better )))
Thanks, all the best
Have you tried going back to your original rom, then going from there?
Hi,
The ProgrammeA thus't connect a cannot update the ROM how can I go back to the original ROM ?
I know about bootable SDCard but I would prefer not to use it, so I check up for other possibilities :?
flare
Active Sync problem?
Hi Flare,
I don't know if this will be the case for you but have observed connection issues between updates with ActiveSync ver 4.71. I found that I needed to TOTALLY remove, not upgrade / downgrade ActiveSync then re-install the original from your CD [probably ver 4.5]
If you don't have it you need to try and get it, because while it provides other problems of its own in connection messages it appears more robust in file transfer.
If you cannot adequately remove AS 4.71 then you need to delete the folder under program files and start again.
Hope this helps,
Cheers,
David
According to the notes on the ROM Kitchen, you can't update from 4.00.10 or 4.00.16 using Programme A. What you can do, however, is cook an .nb1 file and put it onto an SD Card and use the bootloader. Of course this will require a 32 MB SD card and an appropriate USB or PC Card reader to get the new ROM onto the SD card.
Hi, what's the problem when my getdevicedata outcoming txt shows only a U at the beginning and no more information?
I installed active sync 4.0 and I can't browse anymore error no directory /subsomething exits!
last question if I backup data from my pocket pc version. 4.2 can I when upgraded to megneto or 2003se , restore my data?
thx for your help!
Fredddd
rom 1.6 german 12/03/03
radio 1.18
ext rom 1.6.25
1. getdevicedata.txt : copy it to the PC and open it there with notepad
2. Activesync 4.0 : sorry can't help you there
3. your contacts, appointments, ... get synced automatically
files you can copy seperately
Restoring apps & registry is tricky and easily gets you corrupted system.
so it goes, PC was down for a week!
thx for your answer!
regards
Fredddd
hi ppl,
today I ve made rom with the romkitchen, it was 2003 final and everything went ok, phone was functional until I used to try to install some newer versin of the programs I previously included in the rom. That didnt work (of course) so I decide to put another rom without those programs so I can install newer versions but when I run the romkithen exe computer report
in the dos window
error getconnectiontipe - unspecified error
error getting connectiontype
and the program for the patching report that he is trying to get the data from the device and after that he reports that
"cannot execute the remote communication program, please make sure that the usb/serial cable is properly connectes"
of course cable is connected, device syncing with the active sync and the icon is green, used to try to soft reset pc and pocketpc, to hardware reset pocket pc, to connect it to other pc and patch there, to install active sync 3.7.1, to reinstall active sync 4.2, to reinstall usb drivers on the pc, to put sim card and sd card out and to patch then... nothing helped...
what can I do ? is that due to the windows 2003 instalation on the pocket pc (had same version on other wallaby without the problems) ? can I solve that some way ?
I ve read before that patching can be performed from the SD card so I found the xda tools and osi image tool but couldnt found rom nd1 file anywhere (was stupid and didnt make copy of my previous rom)... which rom can I use just to enable USB connection and after that I ll patch it with the "normal" rom from the rom kitchen...
Ive checked those roms http://wiki.xda-developers.com/index.php?pagename=ROMVersions but didnt find any nd1 file in the files I ve checked, can I use those roms with osi image tool eventually ?
which one ?
Lots of questions ... Sorry people ...
I can use it in this condition too but I d rather have an opportunity to flash it to some other version maybe.
Best regards to the community !
I think it´s just the problem that the ROM prohibits flashing via EXE-file. You have to flash via SD-Card.....
You find the ROm to write on the SD-Card in the EXE-FIle. Just extract the exe using winzip, and then you will find it in a subdirectory (normally english, or dependent on the ROM-Language...)
Stefan
Thanks a lot Stefan, so I can use some ROM from the page http://wiki.xda-developers.com/index.php?pagename=ROMVersions ?
Any advice which one should I take please (Im not using any of the operators noted there, just looking for some rom that will function ok) ?
Thanks m8 !
Yes, you can take any rom of it. Mostly the T-Mobile prohibits flashing via EXE-File, but Flashing via SD-Card is more secure in my opinion. So i´ve done 99,9% of my flashes via SD-Card, and you can believe me, i´ve done it a lot of times.....
By the way, which software has to been updated in my romkitchen?
If you give me the hints, i could try to update them....
Stefan
thanks a lot for your time and advices Stefan !
Its not a huge problem but probably we share same opinion - most of the tech guys like to see that everything work fine, if something doesnt work then we re not satisfied.
Basically problem is that I included spb pocket plus in the rom and therefore I cant install spb weather which demands pocket plus v 2.5+ and version in the rom is 2.0. I cant upgrade it coz its in the ROM, used to try to remove it from the registry but no luck, used to install latest spb diary coz the spb weather also work with the diary but looks like that the first thing weather perform is checking of the pocket plus version and if the version is not 2.5+ it stops the installation...
Probably for the most of the people spb weather is not a reason for loosing couple of hours in trying to change rom in wallaby but as I ve mentioned I like the things that work 100%, if some electronic/computer stuff work at 99% that usually bother me. Stupid - I know but thats the way it is.
Im going to patch it thru the SD, thanks again for the all your efforts now and before.
GL & HF !
Sorry...
Still need help, using the OSI tool I copyed NK.nbf file from 4.02.04_eng rom to "XDA SD Card Slot -unknown size" - coz I dont have card reader/writer at the present moment so I tought that I can put the file via the cradle connection while the card is in the wallaby...
Checked the card from the wallaby file explorer but nothing is on the card, since I had expirience with direct writing to c64 and amiga disks writing I assumed that file could be written directly to the card without OS instructions but after the reset of the wallaby it report that card shoud be formatted to become writable... Is that normal, or I should wait for the card writer reader to put the file properly to the sd card ?
If possible please help me with the link for the OSI tool patching, I cant find it anymore, checked thru the site but no luck, dont know what I have to press so the wallaby read the rom from the sd card.
Thanks Stefan & all others
success !
No help needed, I ve made it...
So dont have any fears as Stefan told unpack the rom from the self extracting archive and run osi tool, in the source field set nbf as a file type and then select extraced rom.
As a target you can set card reader/writer and also you can put the SD card in the wallaby as I did. Set the XDA SD card as a target in that case.
Its normal that after the writing (no message that writing is successfull, when it is finished OSI tool will stop) SD card become unreadable to wallaby.
Then perform actions as noted in SD card patching info
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a " Hard Reset"
Action button mentioned above is middle button - "D PAD"
Works like a charm, now I have o2 win 2002 and later I ll patch it to 2003 SE again but without pocket plus.
Thanks Stefan and community !
OK so i just bought a X10 and my task atm is to import everything i had on my prevoius phone (SE V640i)to this one. My concern are rhe text messages and some other stuff that don't get copied on the sim card.
So my question is how do i get all the stuff copied into my new X10 ?
I managed to backup my V640i on my pc but PC companion doesn't let me sync that file with my X10 .... any ideas on how to make it happen ?
(Sry if there was alrdy a topic on this matter but i couldn't find it , that's why i made this one )
Download myphoneexplorer from the internet (the windows version). Study it carefully, plug in your v640, and transfer everything, in this order:
- contacts
- messages
- other files
Once its all on your pc, unplug the v640 and plug in the x10, and make sure it is recognisd and allowed to drop a client app onto your x10. You will need to turn debug on.
Then push your v640's content thats in myphonexplorer onto the x10, in the same order, ie contacts, messages, other files. Do it slowly. Use the help text and you'll be fine.
So guys, I have a huge problem.
I wanted to have Cyanogenmod on my S5, and before I've factory resetted it, I connected my phone to the PC and copied the folder "BeamMemo" to save my important memos.
But now I can't open these files at my PC or my phone, can you guys recommend me a program to do so?
I thought of resetting my S5 so I can install S Note and try to import them, is it possible?
Pls help.