Related
ROOT TO ROM IN X10 Mini PRO (from stock ROM or custom ROM)
(thanks to xda developers nobodyAtall, Spyderex, Emperor.dk and many)
updating my earlier post. The complications in installing recovery completely removed. Now it is easy as charm.
I had myself miniCM pro v21 in stock kernal in my x10 mini pro. So this post intends to do on
1. flashing back to custom sony rom
2. rooting (with busy box installing)
3. installing recovery
4. unlocking bootloader
5. flashing custom kernel
6. flashing cutom ROM and google apps
before that : there are many other steps and methods for this but many of them did not work for me. I am describing here what worked for me.
Before starting save all your needed apps using app saver or with my backup root / titanium backup (after root). Back up your account with google account or export your contacts as .vcf to sd card for later import.
You should have through out internet connection and sometimes you would have to switch off the Antivirus to get it done properly. Also allow adb.exe to connect to net through firewall when needed.
1. FLASHING TO CUSTOM ROM WITH SONY ERICSSON PC COMPANION ( if you are having a custom ROM: other wise proceed to next step of rooting)
1. download and install pc companion from here http://www.sonyericsson.com/cws/sup...ject/pccompanion/xperiax10minipro?cc=in&lc=en if you are not already having it. Then make it recognize the phone.
2. Select support and update. It may tell having the latest update but go for repair.
3. Follow the commands. This may take a while
4. correctly follow the command to connect the phone in flash mode (switched off and back switch pressed)
later you have your old blue sony rom back.
1. ROOTING
1. download superoneclik.exe from here. http://www.mediafire.com/file/x1l6n7owj7uldbl/SuperOneClick.zip The problem is that many versions do not help and this version did it for me. Unzip and run the .exe
2. Plug the phone and leave it as such (do not charg/ connect or anything)
3. click root and follow the commands when prompted (like want to test?)
4. done (donate if you feel so)
5. Check for the superuser app in menu if it have been rooted.
Then go to market and install
* busybox
* root explorer (just to be on safer side)
3. RECOVERY
found out the easy way. Thanks to devrruti and rect2049 in xda
1. Download this clockworkmod installer from here https://github.com/downloads/react2409/X10-Mini-Pro-Utilities/CWMInstaller-Windows-v4-dl.zip
2. switch on the phone and connect the phone (ensure debugging mode on)
3. unzip the downloaded zip file and run the install.bat file. Follow the instructions
4. now disconnect when finished, switch off phone
5. switch on and when sony logo comes start multiple pressing and releasing the back switch to enter recovery mode
so there is cwm recovery
4. UNLOCKING BOOTLOADER
download the flashtool from (0.5.3 -I used) here. http://androxyde.github.com/Flashtool/
1. before advancing further download the required ROM (for me miniCM7 from http://minicm.googlecode.com/files/MiniCM7-2.1.8-mimmi.zip )and google apps from http://cmw.22aaf3.com/gapps/gapps-gb-20110613-signed.zip and copy both to the root of sdcard
2. open the install location of flashtool and install the ggsetup-2.2.0.11.exe file inside and install Gordon’s Gate found in /drivers folder
3. then restart the computer, open the task manager and kill any process named adb.exe
4. donot open flashtool after this till needed.
5. Download the s1tool to confirm the unlock certificate of phone from http://db.tt/OrOQO33 and unlocking tools from here http://db.tt/0zUMR5S4
6. Unzip the s1 tool to the designated folder and run the s1.exe. Switch off the phone. Select the Do Job button and wait.
7. Connect the phone in flash mode (switched off and back button pressed)
8. proceed further only if the screen shows semc simlock certificate
9. unplug the phone, switch it phone, connect to the computer
10. run msm7227_semc.cmd in the directory you unzipped the unlocking files to and press any key to start the unlocking process.
11. If everything goes correctly the log will show press any key at the end.
5. CUSTOM KERNEL AND ROM
download the require kernel.ftf from auther’s site (for me the kernel suiting my ROM was nAa kernal from http://minicm.googlecode.com/files/U20_nAa-10_2.6.29.6-nAa-10.ftf
1. copy this to the /firmware folder in flashtool install folder
2. run the flashtool and select flash, then flashmode
3. select the desired kernel
4. switch off the phone and connect in flash mode when pop up requests
5. disconnect phone when the tool says so
6. switch on the phone and enter the recovery mode when kernel logo comes by repeatedly pressing and releasing the back switch
7. in the recovery mode, do a backup from backup and restore option (up and down by volume keys and select by middle switch)
8. do a factory wipe data
9. then flash the ROM zip by selecting the option install zip from sdcard option followed by gapps zip flashing
10. finish this and take reboot (long)
Enjoy the new experience
A guide that can be stickied for newbies. i like this.
You can even modify the thread by giving elaborate colors and headlines and make it attractive. (if you are interested in doing that so)
Appreciate your work bro!
Thanks!
Tim
Like it.. But the rooting part is gonna feel complex for newbies... There are flash file which root and install CWM recovery automatically without any complication...
unnecessary rooting and recovery installs
I appreciate what you are trying to do as SpyderX's thread can be daunting. I think it would be easier to keep people using one tool as you go around the houses a bit.
Perhaps a simpler route from stock using S1 tool and flashtool. This is just an overview as I've copied and pasted it from my blog and would need expanding with links and sufficient detail:
Backup part 1 - use apps such as SMS Backup +, Bookmark sort and backup, APN backup and restore
Check that your bootloader can be safely unlocked with S1 tool (download from here: http://forum.xda-developers.com/showpost.php?p=19624790&postcount=2)
Turn on USB debugging on the phone (in settings in the applications section)
Use flashtool to root the phone (download from the homepage http://androxyde.github.com/Flashtool/)
Backup part 2 - use a root backup app (Titanium backup or MyBackup Root)
Use flashtool to unlock the bootloader
Flash the kernel (e.g. nAa kernel) in flashtool
Boot into CWM Recovery (assuming and flash customised firmware (e.g. MiniCM7)
http://forum.xda-developers.com/showthread.php?t=1462278
SE Tweaker Tool v3.0 [26/1/12] Unlock Bootloader+Kernel Guide X10 minipro|X10 mini X8
Maybe a bit simpler but your work appreciated bro..!! Keep it up..
Sent from my U20i using xda premium
changed
updated on the complicated recovery installing
Complete clarification needed here.. Do I HAVE to have stock 2.1 or can I use my current GB rom to unlock my bootloader??
Sent from my U20i using xda premium
jimcantfixit said:
Complete clarification needed here.. Do I HAVE to have stock 2.1 or can I use my current GB rom to unlock my bootloader??
Sent from my U20i using xda premium
Click to expand...
Click to collapse
mate its not necessary it go on stock then unlock bootloader.. myself unlocked my bootloader when i was in Gintonic.SE.. also people in Ginger-dx have reported fine.. so dont worry.. ul unlock it safe!!
The drop box links in bootloader unlocking section are not working. Can you please post new links?
Now it can be done with the new version of stool and flashtool. Anyway I will update everything as soon as I get time.
Sent from my U20i using xda app-developers app
I made exactly the same thread quite ago, I was really motivated and stuff but mods just moved it and got it forgotten in the general section. It even had colors, headlines, sections, collaborators, and stuff, sorry to disappointing you but with staff like this it is impossible to help newbies.. I even explained why post it on the developers section: Strictly, it should have been posted on General, yes, but the guide is directed to new members. Most of them probably doesn't check nor even know there is that section. It got moved anyways without any warning or a single word from the one who did it..
Anyways, good luck.
First i'm so sorry if i Repost her.
Because i'm a new in here also android too
okay, just like a title thread..
I really cant Rooting my phone..
dont know why, im using Method Doomlord V4, its useless
im using Method SuperoneClick, same too <-- It was hang in a middle of process
what wrong?
my phone?
owh yeah,.. my phone is Gingerbread, its that a problem?
OK if you are on Gingerbread, you have to do it like this. But your data will be lost, so backup your data first.
Do the first step from here: http://forum.xda-developers.com/showthread.php?t=1695514
You can perform the 2nd step of the tutorial, too to root your Gingerbread rom, but i would root with flashtool. That means you do step 1 of the Tutorial and start your phone.
Then you enable usb debugging on your phone and allow non market apps. After that, you connect your phone to your PC again and start flashtool. There you klick on the open padlock and your device will be rooted automaticly. After reboot, root should be available!
Greets
Michael
Michi_optimus_me said:
OK if you are on Gingerbread, you have to do it like this. But your data will be lost, so backup your data first.
Do the first step from here: http://forum.xda-developers.com/showthread.php?t=1695514
You can perform the 2nd step of the tutorial, too to root your Gingerbread rom, but i would root with flashtool. That means you do step 1 of the Tutorial and start your phone.
Then you enable usb debugging on your phone and allow non market apps. After that, you connect your phone to your PC again and start flashtool. There you klick on the open padlock and your device will be rooted automaticly. After reboot, root should be available!
Greets
Michael
Click to expand...
Click to collapse
OKay man thankxx..
i' will try it. and report it here..
Ok what I forot: Don't perform my first solution, if your bootloader is unlocked, otherwise your phone will not boot again!
And: If you don't want to loose your data, you can untick the box with "wipe userdata" in flashtool, so your apps should still be there after the downgrade.
On which version are you? If you are on the .69 or .62 firmware version, you must perform the Downgrade step, if you are on .58 or any other version, you can just connect to flashtool and klick the padlock to root. On older than 62/69 you don't need to downgrade!
Michael
Hit thanks if it helped please
install the adb drivers and flashtool and drivers then
(1)download this:
SK17i_4.0.2.A.0.58_GLOBAL.ftf
(2) place the ftf in the C:\Flashtool\firmwares folder
(3)use the flash tool to flash this ftf.
(4) root the device using the doomlord's release
(5) update your phone via sony pc companion
done!
btw....factory resets will undo the root...so be careful!!!
source: i own a xperia mini pro
plase press thanks if the post is helpful!
PM me if you need further help!
rajmi said:
install the adb drivers and flashtool and drivers then
(1)download this:
SK17i_4.0.2.A.0.58_GLOBAL.ftf
(2) place the ftf in the C:\Flashtool\firmwares folder
(3)use the flash tool to flash this ftf.
(4) root the device using the doomlord's release
(5) update your phone via sony pc companion
done!
btw....factory resets will undo the root...so be careful!!!
source: i own a xperia mini pro
plase press thanks if the post is helpful!
PM me if you need further help!
Click to expand...
Click to collapse
Updating via PC Companion removes root.
You wont loose root if you follow this guide:
http://forum.xda-developers.com/showthread.php?p=26914104#post26914104
basically:
1. run 01-local-prop.cmd to create /data/local.prop (enable android emulator hack)
2. power off device and update your device WITHOUT FACTORY RESET
3. run 02-push-root-files.cmd to push su binary and superuser.apk
4. your device will automatically reboot
(Btw remember that the scripts only run ok if you are using the MSC connection mode for USB)
superOneClick is only for below 2.2 .. maybe that's why you failed
can anyone make a tutorial about how to install cwm with SE Extreme Tweak Installer v1.8
it says suerimission denied
On which firmware are you? 4.0.2.A.0.62?
Is your device rooted? Because permission denied meens, that you have no root.
If you want to install clockworkmod on lww, check this out. It will automaticly install cwm, but I don't know if it works on locked bootloader...
For SE Tweak installer you could check this out. It's a tutorial
how to root it then?
On which firmware version are you? 4.0.2.A.0.62?
Check out this here
But go to settings -> about phone -> build number and tell which version please!
Simplest Guide to install cmw !
As is usual with most updates, the Sony Ericsson Walkman Live lost root access after its recent update to Android 4.0.4. The guide below will show you how to obtain root access on this device running the 4.1.B.0.431 version of the OS and install ClockworkMod Recovery, enabling you to flash custom ROMs and do other things that require root access.
I. Before You Begin
1. This will not erase any data from your device, but as a precaution, do a backup of what you feel is important just in case.
2. This solution works by flashing a modified kernel that will provide root access. If you are not okay with this, do not proceed any further.
3. You will need a device with an unlocked bootloader for the procedure to work.
{ 4. If you want to install custom rom then download the custom rom and extract it. then there would a boot.img and replace it with the below bootextended blah blah.img } not understood? obviously... read full and then come back to this step.
II. Necessary Downloads
1. boot_EXtendedStockKernel_WT19i.img.
2. Fastboot Files
III. Flashing the Modified Kernel
1. Extract the fastboot-win32.zip file you downloaded above to a folder in your C:\ drive. You should end up with a folder named C:\fastboot-win32 containing fastboot.exe. Rename folder to fastboot for ease.
2. Copy the boot_EXtendedStockKernel_WT19i.img file you downloaded above to the same folder. Rename the file as boot.img for ease
3. Power down your device and put it into Fastboot Mode. To do this, press and hold the Volume Up + Power buttons until it enters the Fastboot mode. Blue led will glow.
3. Open up a Command Prompt window. To do this on your Windows 7 PC, click on the Windows Start button, type cmd in the search box and hit enter.
4. Run the following commands: (Get into . fastboot directory first ):- It should look as this
c:\fastboot\ fastboot flash boot.img
That’s it! You should have a rooted device after a reboot!
pls hit thanks if i helped.!
rachit.rc96 said:
As is usual with most updates, the Sony Ericsson Walkman Live lost root access after its recent update to Android 4.0.4. The guide below will show you how to obtain root access on this device running the 4.1.B.0.431 version of the OS and install ClockworkMod Recovery, enabling you to flash custom ROMs and do other things that require root access.
I. Before You Begin
1. This will not erase any data from your device, but as a precaution, do a backup of what you feel is important just in case.
2. This solution works by flashing a modified kernel that will provide root access. If you are not okay with this, do not proceed any further.
3. You will need a device with an unlocked bootloader for the procedure to work.
{ 4. If you want to install custom rom then download the custom rom and extract it. then there would a boot.img and replace it with the below bootextended blah blah.img } not understood? obviously... read full and then come back to this step.
II. Necessary Downloads
1. boot_EXtendedStockKernel_WT19i.img.
2. Fastboot Files
III. Flashing the Modified Kernel
1. Extract the fastboot-win32.zip file you downloaded above to a folder in your C:\ drive. You should end up with a folder named C:\fastboot-win32 containing fastboot.exe. Rename folder to fastboot for ease.
2. Copy the boot_EXtendedStockKernel_WT19i.img file you downloaded above to the same folder. Rename the file as boot.img for ease
3. Power down your device and put it into Fastboot Mode. To do this, press and hold the Volume Up + Power buttons until it enters the Fastboot mode. Blue led will glow.
3. Open up a Command Prompt window. To do this on your Windows 7 PC, click on the Windows Start button, type cmd in the search box and hit enter.
4. Run the following commands: (Get into . fastboot directory first ):- It should look as this
c:\fastboot\ fastboot flash boot.img
That’s it! You should have a rooted device after a reboot!
pls hit thanks if i helped.!
Click to expand...
Click to collapse
But that's for unlocked bootloader only! With the method I posted, you can root without unlocking the bootloader...
@OP Please tell us which build number you have! You must go to settings -> About phone -> Build number and tell us the number (or at least the 3 or 2 last numbers). If .42, .58, .62, .69, .432, .578! Otherwise we can't help you
First off, greetings to all. Not trying to hijack the thread but I have a quasi-related question.
Have a LWW WT19i, with Android 4.1.B.0.431 rooted as per the instructions here, with a locked bootloader (unlock allowed: no). I want to install Real ICS r5.2 which states it works with a locked BL, however the instructions ask me to use CWM which I can find no clear tutorial on how to install (most guides suggest installing new kernel).
Any help would be appreciated. Also fini13, if you're as new to this as I am, the guide I listed should help you at least with the rooting.
Dark_Az_ said:
First off, greetings to all. Not trying to hijack the thread but I have a quasi-related question.
Have a LWW WT19i, with Android 4.1.B.0.431 rooted as per the instructions here, with a locked bootloader (unlock allowed: no). I want to install Real ICS r5.2 which states it works with a locked BL, however the instructions ask me to use CWM which I can find no clear tutorial on how to install (most guides suggest installing new kernel).
Any help would be appreciated. Also fini13, if you're as new to this as I am, the guide I listed should help you at least with the rooting.
Click to expand...
Click to collapse
When your phone is rooted, you sould install cwm with the Extreme Tweak installer. But make sure you select your phone, otherwise it could brick.
Give it a shot
mihahn said:
When your phone is rooted, you sould install cwm with the Extreme Tweak installer. But make sure you select your phone, otherwise it could brick.
Give it a shot
Click to expand...
Click to collapse
Sir I've installed cwm using xparts and I'M ABLE to get into CWM recovery mode using the one click button in xparts..bt i CANT do the same while swithing on the fon,by pressing (also tried tapping) vol down key, after seeing the blue light sensor..i've tried many times&many ways as explained in many threads..bt coudnt... :crying:
why its so?? Can u once again say the correct combination of keys pls?
live with walkman..locked bl..stock rom&kernal..just rooted..
EDIT: TAP POWER BUTTON TO ENTER INTO RECOVERY MODE....Its not vol down key now in pvyparts 5.5.0.4
follow
fini13 said:
can anyone make a tutorial about how to install cwm with SE Extreme Tweak Installer v1.8
it says suerimission denied
Click to expand...
Click to collapse
first root by this method by doomlord
only follow 1 and 2 steps if u wan Gingerbread
and all for Ics
link- http://forum.xda-developers.com/showthread.php?t=1695514
then insall cwm
download CWM v5.02.7 from here:
http://www.mediafire.com/download/73xv18tht0e8zt4/CWM-Install.rar
requirements:
rooted device
how to install CWM on any xperia
1.turn on USB debugging
2.connect your phone to comp
3.download tthe above file and extract it
4.install-cwm2 for (xperia mini/mini pro/
active/live with walkman)
5.switch off your device
6.turn on the device and wait till "SONY
ERICSSON" logo appers
7.after "SONY ERICSSON" logo appears just
tap the volume down button repeatedly till
CWM open.
The simple method is, try to unlock yor device then install custom kernel that support autoroot and cwm, much tutorial for that in xda. :thumbup:
Having problems on the hassle of downgrading and upgrading just to root your phone that has a locked bootloader?
Here it is the solution for rooting without dowgrading
Requirement:
1. Flashtool - http://androxyde.github.com/index.html?1349526467000
2. ST15i Latest ICS Firmware: (You can use your own FTF file of 4.1.B.0.587 of ST15i, the one below is PH Firmware)
ST15i 4.1.B.0.587 PH Firmware
3. ST15i Kernel for the latest Firmware:
http://www.mediafire.com/download.php?r11d989a42y1ozc
4. ST18i Rootable Kernel:
http://www.mediafire.com/download.php?16uxddet7r0x8i0
5. SUS or PC Companion for Flash drivers
6. Rooting toolkit:
http://www.4shared.com/zip/mzM0gROA/DooMLoRD_v1_Xperia-2011-ICS-RO.html?refurl=d1url
Instruction:
1. Install flashtool
2. Extract the 3 zip files containing the latest PH firmware for ST15i on C:\Flashtool\Firmwares\
3. Copy ST18i kernel at ST15i kernel on C:\Flashtool\Firmwares
4. Flash the firmware using flashtool
5. Go through the initial setup process and turn on Debugging mode and Installation from Unknown resources. This is important.
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
Click to expand...
Click to collapse
6. Now turn off the phone and this time flash ST18i kernel. Yes ST18i and not ST15i.
7. Now turn on the phone and wait for about 1-2minutes. Yes it will stay on black screen. That's normal.
8. Now connect your phone on PC. Turn off your antivirus temporarily and extract the rooting toolkit and run "runme.bat"(The phone is still black screen and that's normal )
9. Follow the onscreen instruction Allow the phone to reboot and when it is done, wait for 1 minute to be sure.
10. Disconnect the phone and remove the battery and reinsert it again.
11. Run flashtool and this tim flash the ST15i firmware.
12. Turn on the phone and enjoy your rooted ST15i.
Credits to this thread
http://talk.sonymobile.com/thread/41119?start=0&tstart=0
stuck
amnher said:
7. Now turn on the phone and wait for about 1-2minutes. Yes it will stay on black screen. That's normal.
Click to expand...
Click to collapse
I got stuck in this step for more than 10 minutes. is there any alternative kernel for my xperia active?
darvishzadeh said:
I got stuck in this step for more than 10 minutes. is there any alternative kernel for my xperia active?
Click to expand...
Click to collapse
in development you have a lot of kernels..
help plz
Ph firmware links do not work. Plz quick update. One more question : is not there any process to install android 4.2 on my st15i running ics? Thanks in advance.
Rocksubhra said:
Ph firmware links do not work. Plz quick update. One more question : is not there any process to install android 4.2 on my st15i running ics? Thanks in advance.
Click to expand...
Click to collapse
Yes there is a way, but you would have to unlock your bootloader and flash a custom kernel. After that install it in cwm
For the firmware links maybe this could help you :good:
thank you dear developer, who has replied me
:good:
Rocksubhra said:
Ph firmware links do not work. Plz quick update. One more question : is not there any process to install android 4.2 on my st15i running ics? Thanks in advance.
Click to expand...
Click to collapse
Dear, I am new here. I hv updated my device's android version using sony pc companion. I am upgraded to 4.0.4.
But I have no idea on how to root. I am unable to install many apps as I do not hv root access. I want my device to be jellybean 4.2
I would be highly obliged if you kindly impart me on how to do this.
4.1.0.587 this is my build number. Thanks in advance.
Rocksubhra said:
:good:
Dear, I am new here. I hv updated my device's android version using sony pc companion. I am upgraded to 4.0.4.
But I have no idea on how to root. I am unable to install many apps as I do not hv root access. I want my device to be jellybean 4.2
I would be highly obliged if you kindly impart me on how to do this.
4.1.0.587 this is my build number. Thanks in advance.
Click to expand...
Click to collapse
You will loose all data on phone!
Okay here you go:
1. Unlock your bootloader. How yo do this is in my guide, but remember it will void your warranty
2. Install Flashtool and all the drivers from the flashtool installation folder for all devices and modes.
3. Download FXP cm10 (Android 4.1.2 - mostly working) or cm10.1 Alpha (4.2.1 - many things not working, for more details see the thread by shufuking) and copy the rom zip to the sdcard of your phone.
Download the Google apps (gapps) for jelly bean 4.1 or 4.2 (depending on which rom you choose) and copy it to sdcard too.
4. Extract the zip on your PC, copy the boot.img to a folder named "kernels" (that you have to create in the Flashtool folder).
Launch Flashtool, click on the flash -> fastboot mode.
5. Click "reboot into fastboot mode" or shut down the phone, wait 10 seconds, hold volume up and while holding volume up connect the usb to pc. Now the blue led lights up
6. "Select kernel to flash" and select the boot.img in kernels folder.
7. Wait until the image is flashed, now unplug you phone.
8. Power on phone and while it's powering on press volume down again and again to get in clockworkmod recovery (cwm)
9. Select wipe data/factory reset (you navigate with the volume keys and select with the home button) and wipe cache.
10. Go to advanced -> wipe dalvik cache
11. Install zip from sdcard -> choose zip -> choose the rom zip and install it
12. Install zip from sdcard -> choose the gapps
13. Now reboot the phone and enjoy
That's it, for any other questions just ask :good:
Thanks Worked Perfectly
+1 boy Thanks For The Thread
Rocksubhra said:
Ph firmware links do not work. Plz quick update. One more question : is not there any process to install android 4.2 on my st15i running ics? Thanks in advance.
Click to expand...
Click to collapse
No updated links?
Hi
When should i first connect phone to pc??? between 5th and 6th step, or on 8th step?? and should i connect it again on 11th step??
Re: [GUIDE]Rooting 4.1.B.0.587 ICS ST15i without downgrade for Stock kernel
FGoldbug said:
When should i first connect phone to pc??? between 5th and 6th step, or on 8th step?? and should i connect it again on 11th step??
Click to expand...
Click to collapse
Connect it at 4, and on 6 and 8
Sent from my Nexus 7 running Android 4.2.1
Links arent working anymore...
N.
You can use this link....
Re: [GUIDE]Rooting 4.1.B.0.587 ICS ST15i without downgrade for Stock kernel
Is this an official generic fw?
when nothing goes right...
go left.
Re: [GUIDE]Rooting 4.1.B.0.587 ICS ST15i without downgrade for Stock kernel
Yep...
Sent from my SK17i using Tapatalk 2
I will be updating links. Sorry for the trouble.
Links are now updated
Please report if there are still problems
step 11 ???
Instruction:
step 11. Run flashtool and this tim flash the ST15i firmware.
Maby flash KERNEL ST15i, or not ??
I did it and root works fine.
Big THX
Why everybody is copying already existing things , to all follow the link it is working 100% secure , try it
http://talk.sonymobile.com/thread/41119?tstart=0
pator5 said:
Why everybody is copying already existing things , to all follow the link it is working 100% secure , try it
http://talk.sonymobile.com/thread/41119?tstart=0
Click to expand...
Click to collapse
It's not "COPYING", it's "SHARING" :sly::what:
Regards,
AJ
hi, a quick guide how to revert from kitkat on xperia ray, should be about the same for most xperia 2011 devices.
if you managed to get to kitkat you will manage to understand this quick guide
pre requirements
1) flashtool
2) original full ics tft file of .587
3) eroot
3) cm10.zip (this what i used to revert to)
1) go to fastboot mode
2) in flashtool select flashmode, select that tft file, and be sure to select no final verification!!!
* you can finish here if you want stock rom
3) let ics load, then enable:
a) develop option->usb debugging
b) xperia-> usb method->msc
c) security-> allow from unknown sources
4) run eroot (one click method) to root your device
5) install x-parts from google play and install cwm recovery
* you can finish here if you want stock rom+root+recovery
6) reboot to fastboot and instal boot.img from the custom rom!!!
7) reboot to recovery and install zip
8) profit...
It is not necessary to flash stock ftf file. Usually when I want to downgrade from cm11, I just flash the respective kernel and do the required wipes (system, data, cache and dalvik cache) and then flash the rom. This method certainly works for me and much easier than always flashing stock ftf.
Sent from my Xperia Mini Pro using XDA Premium 4 mobile app
SimonK9 said:
hi, a quick guide how to revert from kitkat on xperia ray, should be about the same for most xperia 2011 devices.[...]
Click to expand...
Click to collapse
3)a) develop option->usb debugging
b) xperia-> usb method->msc
c) security-> allow from unknown sources
4) run eroot (one click method) to root your device
5) install x-parts from google play and install cwm recovery
those steps are really useless if u switch to a custom rom, bcuz
for a) b) c) u dont need this to enter fastboot. only usb debugging may should be needed for flashtool. but i use flashtool like this: prepare all files till it says ''connect device'' then i connect (powered off) device to flashtool AT LEAST. it works on stock ics without ticked usb debugging -for me-
4) & 5) really useless mostly any custom rom comes prerooted. just a waste of time but maybe u add it below ''*finish here if u want stock.ics'' then u can write it for those who want CWM & root on STOCK.ics
anyway thx for ur effort in making this, im sure it helps many , i just also wanna help so dont take this as a complainment
peace
i wrote this after trying to downgrade and failed with other methods.
flash rom from recovery needed older kernel
flashed kernel but than couldnt get to recovery (might flashed wrong kernel though) was stuck on bootloop.
so i wrote this as a fool proof method, would work for many other cases if you have software problems.
Nice guide yes you may add "*finish here if you want rooted stock ICS & cwm" between 5 & 6.
Sent from my MemoPad