Since i got my atrix i am dealing with a very weired issue, everytime with the new android installation everythings work out of box but after using it,1-2 days after if i want to charge my phone i cant,atrix doesnt recognize at all as same goes to the pc connection as usb doesnt recongnize at all.But if i reformat and install a new android then everything works until i start to use and then the same case again.
Most weired thing is i own a ipad too and if i use the usb cable on the ipad charger i can charge my atrix.I m really confuse whats going on on my atrix.if someone has any solution or any idea i will be greatfull.
Related
soo when i plug my phone to connect to my desktop it says it isn't recognized with a code error 43. It wouldn't install the phone and it won't charge while it is plugged in. and when i used my wall plug to try to charge my phone from there it still didn't work. help?
What did you do to make the phone un-responsive?
Sent from my SGH-T959 using xda premium
well it all started as i was upgrading my psu from my desktop and i guess the usb port was loose and when my desktop was put back together the usb i believe wasnt charging and i didn't notice at that time so i left it plugged with my microusb. i come back from eating finding my phone to be really hot like insanely hot and it wont turn on at all ! then i researched and found this thread to put it in download mode and so i did. but somehow i got stuck at the download mode, so i had this crazy idea that if i removed the driver .. it might work and it would install it's software like normal.. i guessed wrong. i turned off my phone since i didnt want to waste batteries. after removing the the driver i noticed that i cant charge my phone at all .. like i have two different chargers and both didnt work, the microusb and wallplug w/o the usb. now my computer won't recognize my device and won't even install at all
I think I just had an aneurysm.
Ow.
I've had this awesome tablet for just a day and loving it so far. Only issue I have right now is when I connect it to my Windows 7 PC, it is not detected at all. I have installed the PC suite (EeePAD_PC_Suite_v1_0_37.rar) which is suppose to install the requisite USB driver, but no luck.
It charges fine when I plug it into the wall so the wire is okay. Any ideas what maybe happening?
ohTwadi said:
I've had this awesome tablet for just a day and loving it so far. Only issue I have right now is when I connect it to my Windows 7 PC, it is not detected at all. I have installed the PC suite (EeePAD_PC_Suite_v1_0_37.rar) which is suppose to install the requisite USB driver, but no luck.
It charges fine when I plug it into the wall so the wire is okay. Any ideas what maybe happening?
Click to expand...
Click to collapse
Most phones come with the drivers on them to install most functions when plugged in via PnP. I would test and see if uninstalling what you installed and then trying does. I could be wrong though. This is my first tablet and I don't have it in hand yet
i noticed that mine doesn't charge yet it does connect...make sure you restart too
I was told it will charge just at a much slower rate.
Problem solved. I did a bunch of things so I'm not exactly sure which one really fixed it. But rebooting the tablet seems to have done the trick. Also, the front USB ports on my PC have gotten a little strange. If I plug the USB connector all the way it wont work. I have to pull it out ever so slightly to get a successful connection.
Thanks for the quick response guys
No Matter what I install It still shows as an MTP device and that's it. Can not see it in any version of Windows.. any one have this issue. thanks
I got mine to work by using another cable.
Hi I have a Atrix 4G and I was charging it fine yesterday and then today I tried to plug the phone to my computer but phone is not detected and then again the charging doesn't work too. what should I do and did anyone have this problem before? and there's no problem with the data cable cause I checked it with another phone.Please help me with this.
have you tried a different USB cable and it charger box for wall outlet?
Sent from my Galaxy Nexus using xda premium
What ROM have you got installed? I had this problem with CM7-ICS-MOD2 rom, but I reinstalled the ROM and its fine.
I've also had problems with buying cheap USB cables that pass some voltage/current to the phone (so it shows charging icon) but somehow Windows won't recognise the phone... doesn't sound like your problem tho
I think it's not the rom, I think it's the cable and it's not a cheap cable thought it's the normal motorola cable,well what could I say **** happens and all my data's gone cause I thought it might be a problem with the rom. thanks all
I had the same problem with a different phone.. The problem is connection point on the phone especially if it's not charging.. So I'm not sure if that's a part that can be replaced or not.
Hey all. I figured it out, went out side and took a different cable and it worked fine. it was a cable problem.thanks all for supporting.I'm gonna get a new cable from Motorola.
I have 4 cables that don't work on stock android 1.8.3 and I don't get it. I can use RSDLite and the computer detects it without the slightest issue. All the cables work flawlessly if I start rsd on phone boot and it detect right up. So what is wrong with the stock 1.8.3? Should I upgrade... I want to root my phone but can't since I can't use USB.... wtf?
When you plug in your phone, check if you see anything in device manager. Maybe you need to install drivers..
1chris89 said:
I have 4 cables that don't work on stock android 1.8.3 and I don't get it. I can use RSDLite and the computer detects it without the slightest issue. All the cables work flawlessly if I start rsd on phone boot and it detect right up. So what is wrong with the stock 1.8.3? Should I upgrade... I want to root my phone but can't since I can't use USB.... wtf?
Click to expand...
Click to collapse
Windows doesn't have a clue no matter how many perfect cables I use. It works and connects perfectly and immediately over rsdlite. I have 5 known to be working fine in cm7 cables. It will show as charging over AC if I restart the phone and keep the usb cable plugged in. It says it's charging over ac and it doesn't detect it in Media portal or mass storage or anything. Nothing shows up. Why is it that rsdlite works perfectly. This makes me seem that the android OS is at fault. Right? Nothing shows up in Device Manager. Only when in rsd lite mode, it will detect the phone and it will show up in Device Manager.
it's been about 48 hours one a full battery and it'll still at like 80%. I need to charge my phone soon...
Maybe I'll re-flash in rsdlite again? I flashed all the sbf's for stock roms with the same result. Should I reinstall again?
thanks
I don't know if anybody else has had this problem before, but I hope there is somebody out there who can help me with my problem.
Basically, until a few days ago, my Galaxy Tab 10.1 was working fine until I did a reinstall from a backup as I was having a problem with the device due to it running sluggishly slow and crashing every so often.
Now, for some weird reason, the device won't charge at all when the USB cable is plugged into the official USB AC Adaptor and instead all I get is the "MTP Initialization" message that somebody would usually get when connecting the Tab 10.1 to a PC or Laptop.
It seems to charge when hooked up to a laptop very slowly but that's about it.
If there's anybody out there who can help me fix this problem, it would be most appreciated at all (to be honest, I can't wait until I go back to university in September and I can sell this POS and buy a 64GB Transformer Pad Infinity instead!)
EDIT: I've tried another cable and now it's saying that it's MTP-Connected instead of not MTP-Connecting at all!
Bump as I have a feeling that this isn't a one-off problem and that it's affecting a lot of other Tab 10.1's as well...
Never had that issue.
Are you sure your cable is ok?
Having exactly the same problem, no idea how to fix it at all. Looks like it's faulty usb port, because sometimes my laptop 'recognize' the tablet, but it's very rare (don't really know what does it depend on). I'm afraid sending the tablet to service is the only solution .
Try a different charger, different cable and check the port for debris
Sent from my GT-P7500 using xda app-developers app
I've checked the port and there's no debris in it, I've checked the new cable that I've bought and it's already worn through from the look of things at the end with the plug that connects to the device itself.
Hi.
I have an Xperia X10 that I gave to my husband. He's good with computers etc.. and he went ahead and unlocked and rooted this phone. It's working awesome - EXCEPT - when you plug it into the computer via USB the computer will NOT recognize it. It says exactly, " "USB Device Not Recognized
One of the USB devices attached to this computer has malfunctions, and Windows does not recognize it. For assistance in solving this problem, click this message"".
Here is a bit of background info:
Before my husband rooted the phone etc. the micro usb port on the phone wasn't working properly - it was loose and you would have to really wiggle it, bend it etc.. to make the debug engage. He did get it to flash/root/unlock/install custom rom successfully ( he installed doomkernel 2.6.29-modFXP-DooMKernel-v06) all while the phones usb wasn't working ideally. At this point he was trying out some settings and branded it as a X10i Generic. (This phone WAS a Rogers phone and we are in Canada). He then wanted to change the branding since x10i wasn't working too great. At this point the USB port on the phone wouldn't engage into debug or charge anymore so we took it to a repair place and they soldered the usb port back - they told us this was common (them coming loose). After they soldered it they said it wouldn't go into debug and that it was because (probably) of the firmware my husband put on but didn't really know.
From that day on this phone has never connected to the computer successfully - the computer won't even recognize it as a memory card - as soon as you plug it in it tries to install drivers and then the computer says exactly this::
"USB Device Not Recognized
One of the USB devices attached to this computer has malfunctions, and Windows does not recognize it. For assistance in solving this problem, click this message"
Our computer is running Windows 7 (64bit) - and the phone use to work fine.
We have tried using SDK tool, installing drivers manually when the phone is plugged in, but the computer will just say that it is already up to date, and it names the phone ' UNKNOWN DEVICE" and has the exclamation box next to it indicating it's malfunctioned. Sony software (PC Comp. etc) also will not detect the phone.
Have been trying to get this working for about 2 months now. 2 months of reading, google searches, more reading, trying idea after idea, and it doesn't work.
Has this happened to anyone else? Can someone help out here? Is this a firmware/software problem (maybe because it's been branded as a x10i)? Or could this all be a matter of the USB port being improperly fixed?
Facing same USB malfunctioned issue
I am facing the same issue since quite long since i have rooted my Samsung Galaxy 2 SGH T-989. My phone gets connected properly but when i try to transfer any of the files from computer to my phone. It gets disconnected automatically after copying the stuff till 5% to 10% and shows ''USB device has malfunctioned".
I am also trying to search and rectify this issue, but till now i have found nothing. Please let me know if you come across of kind of solution for it.
Im sometimes facing the that unrecognized USB but, everthing working.
Sent from my X10 using xda app-developers app
I faced the exact same problem with my x10 mini. It wouldn't charge properly nor connect to my PC. I would have to wiggle the micro USB port and cable to get it working, which actually got me wondering if the problem was really the USB port. After I've bought a male-male USB to micro USB cable everything worked fine. Same thing happened with a brand new x10. I tried to use the USB cable I bought instead of the original one which came with the phone and you wouldn't guess, everything works fine.
So try to connect it with another USB - micro USB cable.
CCVader13 said:
I faced the exact same problem with my x10 mini. It wouldn't charge properly nor connect to my PC. I would have to wiggle the micro USB port and cable to get it working, which actually got me wondering if the problem was really the USB port. After I've bought a male-male USB to micro USB cable everything worked fine. Same thing happened with a brand new x10. I tried to use the USB cable I bought instead of the original one which came with the phone and you wouldn't guess, everything works fine.
So try to connect it with another USB - micro USB cable.
Click to expand...
Click to collapse
We have already tried connecting it to all of the (10) usb ports on our computer and we have tried NUMEROUS cables ( between my husband and I we have probably 8 cables, and have tired them all)