[Q] Unable to flash ROM - Fascinate Q&A, Help & Troubleshooting

I'm fixing my friend's Fascinate for him. He was having major issues all around with it, so I flashed back to unrooted stock using the methods in this forum, re-rooted, then flashed CWM and have tried flashing ROMs.
My problem comes when I try to flash any ROM, though. While still in CWM, the phone reboots during installation of the ROM. There is no error message, but the process is not completing. Has anyone else seen anything like this? Thanks!

Some roms take 2 times to stick
Really need more info...
Like which rom
Which cwm
Are you using droidstyle's guide?
Sent from my swagger

Related

[Q] Please help: Restore won't work.

I was running MIUIwiz and I tried to switch kernels or something and I suppose long story short I was able to recover my phone from an infinite bootloop however I can't restore my back up in clockwork. I actually can't flash any ROM that isn't the odin stock ED01. It's rooted because superuser works. But I'd really like to get back to my MIUIWiz backup.
I think it might be a kernel problem. I honestly don't know which one I need or what.
I realize this information probably sucks but I can answer any question if you just ask it.
Please someone help me!
EDIT: I think I've resolved the issue. I downloaded like 5 kernels and seems like the first one I used is going to work.
what happens when you try and flash a rom?
worst case, odin back to stock and start over.
Or if you think it's a kernel problem, flash a new kernel and try again.
elarson006 said:
what happens when you try and flash a rom?
worst case, odin back to stock and start over.
Or if you think it's a kernel problem, flash a new kernel and try again.
Click to expand...
Click to collapse
That's the thing. Usually I can fix these type of problem. However I've odin'd to stock multiple times. Tried to flash the MIUIWiz ROM and it just stays on the Samsung logo. Same goes for trying the restore. I've used this to get to ED01 mutliple times as well as manually flashing the updates and I still can't flash anything.
Can you suggest an ED01 MIUIWiz compatible Kernel? Because I don't know what is good or compatible or anything.
Horus.Campbell said:
That's the thing. Usually I can fix these type of problem. However I've odin'd to stock multiple times. Tried to flash the MIUIWiz ROM and it just stays on the Samsung logo. Same goes for trying the restore. I've used this to get to ED01 mutliple times as well as manually flashing the updates and I still can't flash anything.
Can you suggest an ED01 MIUIWiz compatible Kernel? Because I don't know what is good or compatible or anything.
Click to expand...
Click to collapse
Did you wipe data before flashing the ROM? Reading the first few posts in the MIUIWiz thread, it says you have to wipe date before flashing the ROM and that the most common cause of the ROM not loading is not wiping data.
which recovery did you use when you did the back up?

Help flashing ROMs on this phone.......

I have been trying my best for the last 3 hours to flash a rom on this damn phone. I have rooted it and installed a custom Recovery. However ever time I flash any ROM to this phone through clockwork I get an error in clockwork mod stating assert failed and gives a bunch of code and then says status 7. What the heck is going on here ? I have flashed roms for years using this site and I have never had so much trouble. Can someone help me PLEASE ?
If you are getting status 7,you should Odin back to stock..then read the thread for the one you want to flash.
Sent from my SCH-I500 using XDA App
This is NOT development. This belongs in the Questions and Answers, or General Section.
Sent from my Fascinate with MIUI Gingerbread
Shakes is right. Odin back to stock (check md5 first), root, make sure you install the right version of clockwork. There are at least two flavors of CWM 4.0, two of 3.0, and something like four of 2.x. After you've figured the right CWM, DL your chosen ROM and run a checksum to make sure the zip is intact. Then flash away. If you break/brick, Odin back to stock again. Repeat until you get a config you like.
RE:
Okay I am trying to flash this build http://forum.xda-developers.com/showthread.php?t=1168068. I have no idea how to on this device. I have went back to stock 5 or 6 times. And started over. Can you guys please tell me how I would flash this after flashing CWM and rooting ?
cjegan2008 said:
Okay I am trying to flash this build http://forum.xda-developers.com/showthread.php?t=1168068. I have no idea how to on this device. I have went back to stock 5 or 6 times. And started over. Can you guys please tell me how I would flash this after flashing CWM and rooting ?
Click to expand...
Click to collapse
What rom (which stock) were you running before? Even more important what kernal? And which CWR? Before you flashed back to stock were you running a voodoo kernal? and if so did you disable lagfix? I had the same problem and it was that lagfix was still enable.

Help i messed something up

ok so i wouldnt say im a noob but im not as advanced as some of yous. last night i flashed a leaked ics onto my phone and loved it with one exception. i couldnt figure out how to root it. all my apps are backed up on titanium backup and i didnt want to have to get all of them manually. so i flashed back to stock using odin with a file i used back when that crappy update came out. i rooted it with super one click and and then went to put on a prerooted ics... when in recovery mode now i get this message
cant access to '/system/csc/att/system/'
i try putting on cwm and siyah and i keep getting authentication errors and the installation aborts. also recovery mode wont read my external sd card now. when the phone is booted up it works fine except i tried to do the factory ota update and it keeps failing. i tried reflashing back to stock again and did the update unrooted and it still failed.
i know you guys hate hate when people ask without researching so i did SOME forum browsing and found nothing. sorry i dont really have time to look too extensively. i just want to know how to fix it. i appreciate any help i can get
Joeyjr25 said:
ok so i wouldnt say im a noob but im not as advanced as some of yous. last night i flashed a leaked ics onto my phone and loved it with one exception. i couldnt figure out how to root it. all my apps are backed up on titanium backup and i didnt want to have to get all of them manually. so i flashed back to stock using odin with a file i used back when that crappy update came out. i rooted it with super one click and and then went to put on a prerooted ics... when in recovery mode now i get this message
cant access to '/system/csc/att/system/'
i try putting on cwm and siyah and i keep getting authentication errors and the installation aborts. also recovery mode wont read my external sd card now. when the phone is booted up it works fine except i tried to do the factory ota update and it keeps failing. i tried reflashing back to stock again and did the update unrooted and it still failed.
i know you guys hate hate when people ask without researching so i did SOME forum browsing and found nothing. sorry i dont really have time to look too extensively. i just want to know how to fix it. i appreciate any help i can get
Click to expand...
Click to collapse
Start with getting back to stock using this guide. Check for ICS bootloaders too, you probably flashed them and you have to get stock ones back (careful, flashing bootloaders can cause hardbricking). Once you're back to stock and rooted, you shouldn't need to ever use PC Odin again.
Then use this guide for rooting/flashing.
One other note: when you tried to install CWM, it sounds like you loaded an update.zip onto your phone then tried to install it using stock recovery. Stock recovery won't let you install unsigned update.zips, which is why that method for getting CWM on your phone will never work (hence the authentication error and installation abort). For our phone, CWM is only included in custom kernels, that's the only way to get it on there, and don't even think about updating or changing it via other means. Just flash a custom kernel, it'll include CWM, use it until you want to switch kernels.
Hit my thanks button, I was really nice this time. And post in Q/A next time as well.
EDIT: Skip the second guide if all you want is stock. You should be able to update OTA after following the first guide. Though even if stock is what you want, I highly recommend flashing a custom GB kernel because a) they're more stable and faster and b) you'll have CWM in case you need it.
You started off mentioning about "leak ics" which I have absolutely zero experience.
My suggestion:
1. Try to get it back to stock. Make sure it works correctly.
2. If hasn't rooted yet, do so.
3. Getting CMW into the device by flashing custom kernel.
4. From there, install any ICS ROM you want.

Getting Stuck on the Samsung Boot Screen on Some Roms

I've been trying different ROMS and I used SlimROM for awhile until I realized GPS didn't work and my cell connection sucked comapred to TW-based ROMS. Then I tried Hyperdrive which worked at first but every time I would reboot after the first power on after the install, it would stay stuck on the Samsung screen. I reinstalled it time after time (like 6 times) and it would never REboot after the first boot. Every other ROM I've tried installing (Illusion, Synergy, CleanROM) just gets stuck right after the install and they never boot.
I've also noticed that when I try to do a factory wipe after installing anything but SlimROM, I get "error mounting /data" and "error mounting /sdcard/.android_secure".
I've tested installing all of these with the newest verison of TWRP and CWM v6.0.3.2
any ideas?
Factory reset Last option
snowman4839 said:
I've been trying different ROMS and I used SlimROM for awhile until I realized GPS didn't work and my cell connection sucked comapred to TW-based ROMS. Then I tried Hyperdrive which worked at first but every time I would reboot after the first power on after the install, it would stay stuck on the Samsung screen. I reinstalled it time after time (like 6 times) and it would never REboot after the first boot. Every other ROM I've tried installing (Illusion, Synergy, CleanROM) just gets stuck right after the install and they never boot.
I've also noticed that when I try to do a factory wipe after installing anything but SlimROM, I get "error mounting /data" and "error mounting /sdcard/.android_secure".
I've tested installing all of these with the newest verison of TWRP and CWM v6.0.3.2
any ideas?
Click to expand...
Click to collapse
if nothing works, factory-reset but last option.
yeah I just started downloading the stock rom to flash with ODIN in the morning. I just wanted some reason why this would happen so I won't always have have this problem and to know why it only works with some roms over others.
Please read forum rules before posting
Questions and help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Im having the same problem. I've done a complete ODIN restore to stock like 10 times, while trying Hyperdrive downloaded from 2 sources all with a matching MD5.
I'm on rooted stock right now until someone can figure this out.
I followed the rooting procedure... tried TWRP and Clockwork recoveries... Followed all instructions to the T...
Not sure what else to try... Or what I could be doing wrong... All I can think of now is restoring someones nandroid backup...
Being stuck at the Samsung Galaxy S4 screen sucks...
Zothar said:
Im having the same problem. I've done a complete ODIN restore to stock like 10 times, while trying Hyperdrive downloaded from 2 sources all with a matching MD5.
I'm on rooted stock right now until someone can figure this out.
I followed the rooting procedure... tried TWRP and Clockwork recoveries... Followed all instructions to the T...
Not sure what else to try... Or what I could be doing wrong... All I can think of now is restoring someones nandroid backup...
Being stuck at the Samsung Galaxy S4 screen sucks...
Click to expand...
Click to collapse
I restored to stock using these files http://www.sxtpdevelopers.com/showthread.php?t=237 to flash through ODIN. Rerooted by flashing the older kernel, rooting, installing superSU, then reflashing the newer kernel (normal root procedure). Then I insatlled ROM Manager and gave it root to install CWM recovery. Then I flashed to my same Hyperdrive ROM I was using before and now everything works beautifully. Nothing gets stuck anywhere an no more "cannot mount /data"
Just use that site and restore to stock and everything should work fine.
I'd like to add some confirmation to this. I had similar problems after flashing my first ROM- phone wouldn't reboot a second time, and when I attempted to make nandroids the files would be ridiculously large (~1 TB). I restored to the stock Touchwiz, rerooted normally, and reflashed normally. The strange thing is that I did the rooting and the flashing with the same files I had used the first time, implying something went wrong during the first rooting/flashing process.

[q] help!! Note down

So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
dar101978 said:
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
Click to expand...
Click to collapse
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
CalcProgrammer1 said:
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
Click to expand...
Click to collapse
Thanks thats what i did, I just basically had to use KIES to use the emergency recovery, then root my phone again. My question is what version of TWRP causes this? cause i used the newest version i could find off GOO. My other concerne is, will it accept or be safe to use a custom ROM? Well i gues ill find out :laugh: THANKS AGAIN!
Everyone with the sgh-i717 is having problems with the latest TWRP and the most stable version is 2.5.0.0. Go with that one or you'll be starting all over again I imagine. And don't just stop at the download link in the OP's, read the thread and find out what's going on. The problems with TWRP have been going on for a while and the development threads have a lot of comments about the latest build causing problems. Good luck! :good:

Categories

Resources