Hello,
I am in a serious problem my S3 got stuck at Boot Loop i have Indian 16gb S3. I downloaded the latest Stock Firmware from Sammobile and followed the instruction on XDA for installing the firmware.
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELLC_I9300ODDEMA2_I9300DDELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> tz.img
<ID:0/009> NAND Write Start!!
<ID:0/009> sboot.bin
<ID:0/009> system.img
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<ID:0/009> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
this is my ODIN log everythg went well as i can see but its hanged at the boot loop anyone please help me out. Previously i was using Omega 44.2 rom but today i installed the Stock rom downloaded from sammobile and i got stuck please help me out please please
Try recovery and factory reset first .
Did you wipe before install ??
jje
JJEgan said:
Try recovery and factory reset first .
Did you wipe before install ??
jje
Click to expand...
Click to collapse
how to do factory reset as its getting stuck at samsung logo and yes i have wiped all the cache and have done factory reset before installing the Stock Rom
jswl.dty said:
how to do factory reset as its getting stuck at samsung logo and yes i have wiped all the cache and have done factory reset before installing the Stock Rom
Click to expand...
Click to collapse
Via recovery .
All the basics are posted in the stickied faqs and guides .
jje
hi guys,
i have an att note and was trying to root of odin
went through all the process, ODIN even Gave me the green light pass
and reboot the phone, its just that the phone came back on and never seem to pass the samsung screens
so ive decide to do a recover with CWM recovery i got this
and the phone stuck on the same screen and
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cwm-touch-i717-120409.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
not sure if this help but in download menu i have custom binary yes (5counts)
guys please help, or did i fried my phone
thanks
Thread moved to Q and A - please post in accordance with XDA rules.
boot into the recovery you installed and wipe cache/dalvik
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Do you have a Canadian version of the note? If so you have to disconnect the phone from the pc as soon as Odin shows PASS, pull the battery from the phone, put the battery back in the phone and enter recovery with the vol + and - and the power button.
So I have the SGS II of my sister here.
She told me that the phone freezed and when she rebooted it, it only showed the bootlogo for hours.
I tried to flash a new firmware with Odin but it keeps giving me the message that it failed.
When I boot the phone up regularly, it shows the message "firmware upgrade encountered an issue. please select recovery mode in kies & try again".
It isn't rooted or modded in any way and is branding free.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
That's the message Odin gives me.
Any help for me?
danslecarton said:
So I have the SGS II of my sister here.
She told me that the phone freezed and when she rebooted it, it only showed the bootlogo for hours.
I tried to flash a new firmware with Odin but it keeps giving me the message that it failed.
When I boot the phone up regularly, it shows the message "firmware upgrade encountered an issue. please select recovery mode in kies & try again".
It isn't rooted or modded in any way and is branding free.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
That's the message Odin gives me.
Any help for me?
Click to expand...
Click to collapse
turn off the phone and instead of holding vol down to get into recovery mode, do vol up + home + power, you can then do a factory reset and flash a stock rom as normal through odin. just worked for me!
TomFrom said:
turn off the phone and instead of holding vol down to get into recovery mode, do vol up + home + power, you can then do a factory reset and flash a stock rom as normal through odin. just worked for me!
Click to expand...
Click to collapse
Can't get into recovery mode since it isn't rooted. When I press vol down + home + power, I only get the bootlogo
danslecarton said:
Can't get into recovery mode since it isn't rooted. When I press vol down + home + power, I only get the bootlogo
Click to expand...
Click to collapse
Don't think you need root. I didn't. Try it! Vol up +home +power
I9100?
Say hi to your sister fir me, and flash JB leak.
Sent from the little guy
TomFrom said:
Don't think you need root. I didn't. Try it! Vol up +home +power
Click to expand...
Click to collapse
I already tried but it only gives me the bootlogo
And I meant Vol up + home + power in the previous post
Vol down gets me to download mode
You need to press the combo for 7 sec, it'll reboot a couple of times before going to recovery.
Sent from the little guy
I am from India, and I was using the Galaxy s2 with Jelly Bean 4.1.2(installed from KIES). The phone suddenly crashed and only download mode is accessible. I downloaded the stock firmware from sammobile and tried odin3 v3.07, but it isnt working and the 0:[com3] background is blue.
The firmware i tried booting it with is I9100XWLST_I9100ODDLSE_I9100DDLS9_HOME.tar.md5
i uploaded this by clicking on the PDA button and this how far it got to:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSK_I9100ODDLSA_I9100DDLS9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've run out of ideas and forums that I've gone through ! Some one please help!
Look for @Hopper8 thread. Great thread lots of info on Odin problems
No Luck!
andrewwright said:
Look for @Hopper8 thread. Great thread lots of info on Odin problems
Click to expand...
Click to collapse
Hi,
I read through and tried flashing with siyah v6 but even that failed.
Not really sure what the issue is!
mosesadarsh said:
I am from India, and I was using the Galaxy s2 with Jelly Bean 4.1.2(installed from KIES). The phone suddenly crashed and only download mode is accessible. I downloaded the stock firmware from sammobile and tried odin3 v3.07, but it isnt working and the 0:[com3] background is blue.
The firmware i tried booting it with is I9100XWLST_I9100ODDLSE_I9100DDLS9_HOME.tar.md5
i uploaded this by clicking on the PDA button and this how far it got to:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSK_I9100ODDLSA_I9100DDLS9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've run out of ideas and forums that I've gone through ! Some one please help!
Click to expand...
Click to collapse
Doesnt seem like the phone is charging either!!
Flash philz kernel and then you should be able to get to recovery then flash a custom Rom
Read this bro
http://forum.xda-developers.com/showthread.php?t=2101610&page=2
Hope it helps !!
I tried everything possible but nothing worked. . I got stuck at factoryffs every time then hit xmit data failure. . M sure I hard bricked it now! ! Must be the motherboard. .
can someone please post links to the philz kernel and a stable india version JB firmware !! Please please ... im desperate!!
Search!! Dont be lazy its not hidden or hard to find.
seriously bro?? I found the thread to that kernel but that list is never ending.. God knows which kernel is for my phone!!
Only comment if you have answers please !!!!
All the videos that i watched online show how to install philz kernel on a working phone.
My phone is kinda dead... so what needs to be done after flashing philz kernel? Tell me the next steps please..
Does it still go to download mode? Does odin still see it?
I tried flashing my phone with philz kernel but even that failed...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XWLSK-ODD-4.92.8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<OSM> All threads completed. (succeed 0 / failed 1)
Make is easy on your self and flash lss firmwear and flash lss kernel "near the top of download list" chances are you dont have an os now odin has failed to flash. Hooper8 thread has good info on flashing problems! Read that before you try.
Pics clicked a minute back... does this help...
Pls read hooper8 thrsad
Any joy now op?
Nope.. No luck... nothing goes beyond the nand write start! message.. Im done trying stock rom from sammobile, siyah v6, philz kernel.. nothing succeeded
mosesadarsh said:
Nope.. No luck... nothing goes beyond the nand write start! message.. Im done trying stock rom from sammobile, siyah v6, philz kernel.. nothing succeeded
Click to expand...
Click to collapse
Same problem here, my phone was working fine then all of a sudden i noticed it was dead, tried rebooting it, nothing happened, boot loop, tried to access CWM, i got the lower section menu of CWM but nothing else, a black screen with the buttons.
So next i said, let me use odin to flash a new kernel. That failed and ever since that failed, i cannot do anything except enter download mode. If i power the phone on, i get a [phone-problem-computer] image in yellow with text that says somehting like problem loading software, please conntect to kies recovery mode. of course that never works.
And everytime i try to flash absolutely anything on this device, Odin DOES see the device, and the second i press flash/start, when it reacher nand write start, it hangs there, stuck doing nothing.
I took the phone to a friend who has an Riff jtag box, he soldered his jtag to the phone and said the memory chip is not dead, i can read its capacity normally. But when he tried to write to it, it did not work, kept giving him errors, he said he has never encountered such a behavior before. And then i had to leave.
Up to now, my phone is still dead and i have no idea what to do. It only enters download mode, but at the same time, this is useless since flashing anything simply does not work. Anyone knows what the reason could be?
FYI, i was on NeatROM 5.5, which comes with Philz Kernel.
NAND is stuffed/corrupted. How/why - who knows ? Motherboard replacement if you've already tried JTAG. Could be something hardware going on that caused the chip to become 'damaged'.
Hi all ,
So , I decided to put CM 12.1 on my GT-I9301I and i've stuck at one point for hours .
At first , I went thorugh all these steps slowly and precisely so i dont fail or anything .
The part where im stuck is that when in theory i installed TWRP through odin , my phone just loads up stock recovery all the time , no matter what . I tried CWM too and nothing changes .
Just so you know , of course i used 2nd method in here http://forum.xda-developers.com/show...99&postcount=2 .
Again i went slowly through all steps and even in odin everything went down good .
Mabye there is some hint in odin log :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But tbh i dont know what to do . Im stuck at it all day Thanks in advance
Did you resolved this? If not you may try boot into recovery by pressing and holding vol up and home right after flashing cwm/twrp and odin auto resets your phone