Hello everyone!
I have bought a Candy TV phone locally. Its specs are:
Dual SIM
Mobile TV
FM Radio with 3.5mm Stereo Headset Jack
3.5-inch IPS Capacitive LCD
1 GHZ Processor
Wi-Fi b/g/n
Bluetooth 2.1
Dual Camera with 2MP Main
MicroSD Expandable Storage (up to 32GB)
1300 mAh Battery
Android Gingerbread 2.3
Click to expand...
Click to collapse
Here are some benchmarks:
Quadrant Advanced 1.1.6
Total 1985
CPU 3787
Mem 3053
I/O 1115
2D 1017
3D 954
Quadrant Standard 2.1.1
Total 2016
CPU 1944
Mem 3424
I/O 993
2D 1133
3D 2584
AnTuTu Benchmark 2.9.3
Score: 3989
RAM 442
CPU integer 756
CPU float point 566
2D graphics 364
3D graphics 1426
Database IO 435
Android System Info 1.24.1 (Omitted other details)
Internal Memory 127.12MB Max
RAM 234MB Max
Android version 2.3.6
CPU ABI armeabi-v7a
Manufacturer alps
Hardware mt6575
Device hexing15_6626_gb2
Display CHERRY_M57_8051-1J-8_HVGA_4G&2G_V013
Processor ARMv7 Processor rev 10 (v7l)
BogoMIPS 1998.84
Click to expand...
Click to collapse
I have tried:
- SuperOneClick 2.3.1 - Hangs after failing GingerBreak ("Hellions with BLUE flames!). Suggestion in another thread to turn USB Debugging on and off when SuperOneClick hangs did not work.
- The application from UnlockRoot.com - Fails to get shell root
- TPSparkyRoot's batch file - apparently this works with MT6575 ICS ROMs.
- Bin4ry v12 and v15 - again, this is more for ICS/JB based phones
- MTK Droid Root & Tools v2.2.8 - fails to gain root
I have also tried SP Flash Tool (versions v3.1206.01, v3.1208.01, v3.1216.05) to dump the BOOTIMG but no luck. I am getting this error: "BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
[BROM] Can not pass bootrom start command via USB cable!"
Any ideas on how to root this phone? The phone has very small internal memory - rooting it would enable more efficient space and app management.
I have included the scatter file used by SP Flash Tool for your reference.
Thanks!
Update:
SP Flash Tool was detecting the MediaTek PreLoader USB VCOM Port as COM35. I followed lolo250612's instructions here to install the MediaTek DA USB VCOM Port. It was initially placed as COM37 but SP Flash Tool was detecting the COM35 port. I changed the port of MediaTek DA USB VCOM Port to COM1 but it still detects the COM35 port.
Also tried to press VOL UP, VOL DOWN or both before inserting USB but to no avail.
Different phone, same problem
Hi, I share your problem. I also have a MediaTeK MT6575 phone with android gingerbread 2.3.6. I have also tried to gain root acces using the methods you described, but no luck.
I have the best hope, to flash a CWM, using the tutorial described in this thread. But the SP flash tool won't let me flash anything in the recovery. See my thread here.
Let me know if you get any further.
SAME ISSUE HERE.
Guess I'll have to watch this space for updates =___=
i 've dump system(zip), put supersu,su and busybox into proper place, but now stuck here: how to convert zip>.img so can i use to flash with flashtool?
sory for bad english
sent from LT28i
Any link for MTK Droid Root & Tools v2.2.9?
gerstavros said:
Any link for MTK Droid Root & Tools v2.2.9?
Click to expand...
Click to collapse
ihope this what u looking for
ge.tt/m/1D4pqfR
sent from LT28i
ROOT SOLUTION
http://forum.xda-developers.com/showpost.php?p=35683680&postcount=142
Related
Good day!
In General this problem, there is a Chinese table
lenovo Model: S6000 D
Processor Model: MT6572 (MTK6582 1.5 GHz fake)
Operating System: Android 4.2
Display resolution: 1280x720
Tablet Data Capacity: 32GB
Memory Capacity: 2GB
Cell Capacity:6500
Network Communiction: Built-in 3G,Bluetooth,Wifi
Screen Size: 10"
Extend Port: DC Jack,Earphone Jack,OTG,SD Card,TF card,USB
Camera: Second Webcam
Touch Screen Type: Capacitive Screen
Processor Main Frequency: Quad Core
Feature: GPS,Multi Touch,HDMI,G Sensor,Phone Call,FM,OTG,Ultra Slim,Dual Cameras
Front Webcam Pixels: Front 2.0 MP+Back 5.0 M
d101_mb_v2.0
After formatting and firmware started to give the error message when you start Boot error!!!! There is a backup with similar tablets. With different backups produces two different error, Boot Error and decrypt failed boot error.
The solution to this problem is?
I got same samsung clone i9190 sw problem. I faced same error on dragon , piranha and sp_flashtool. but one day I updated my pc to windows 8.1 x64 and then I let the pc install mtk preloder driver. And result is Positive. It connect with Pc withwout no error.
SO TRY WITH WINDOWS 8.1 PRO 64 BIT (FOR THIS MODEL ONLY)
But sad thing is that that time I could not find flash file for that phone. I returned that phone to customer.
But the funny thing is that particular this error comes only for this samsung clone mt6572 based phone.
I have a problem with loading the tablet. firmware without errors
I have an old (Not really that old, it is still available to buy now) HCL ME Connect 3G 2.0. I have rooted it and install a Custom CWM Recovery for it (CWM Automade by rua1) And I have tried to install a Custom ROM, Unfortuantely my Device is now Bricked. It will boot into The HCL Logo, But when I use the Volume Up and Power Button to Get into the CWM Recovery I could get into it.
Now I have tried many ROMS and the Stock One they say are suitable for it but when I try to install some of them CWM Log says - [Unpacking Update, Installing Updates, Failed To Install Update Package Bad] I have tried many other Custom Recoveries like TWRP that is said to work with my Device. But Unfortunately its not working too.
I have tried to install ADB Drivers And Fastboot Drivers to install the ROM Directly and it dectects the Device as - [??????Unknown Permissions] and when I try to run "adb reboot" or anything similar The CMD Says it doesn't have the permission to do that.
I do not understand what's wrong with it
It would be Great IF ANY OF THE XDA MEMBERS COULD HELP ME OUT! THANK YOU!
My Device Specs(Although it's not that Great)
Highlights
- 1.2 GHz Cortex A9 Dual Core Processor
- 1 GB DDR3 RAM
- 7 Inch Capacitive Touchscreen Display
- 3.2 MP Rear Camera
- 0.3 MP Front Camera
- Dual SIM Slot
- Blutooth/FM
- Wi-Fi 802.11 B/G/N
- Mini HDMI
- 3500 MAh Battery.
Technology / Frequency Bands GSM : 850/900/1800/1900 MHz UMTS : 2100 MHz
Battery
Type Li - Po
Capacity 3500 mAh
Standby -
Talktime -
Built
Dimensions -
Weight 315 g
Form Factor bar
Colors Silver
Display
Size 1024x600 pixels
Type color : TFT
Colors 16000000 colors
Secondary Display no
Camera / Imaging / Video
Camera Yes 3.0 Megapixel
Resolution 2048x1536 pixels
Zoom yes
Flash no
Video Out yes
Secondary Camera yes
Secondary Camera
Flash no
Connectivity
Bluetooth Yes
Irda No
Wlan/Wi-fi Yes
USB yes
GPS yes
Data
GPRS Yes
EDGE Yes
3G Yes
Internet Browsing Yes , Android Webkit
Media
Audio Playback Yes
Video Playback Yes
Ringtones MP3 and Polyphonic
FM Radio Yes
3.5mm Headphone Jack yes
Memory
Inbuilt 4 GB
Memory Slot Yes microSD/TransFlash
Messaging
SMS Yes
MMS Yes
Email Yes
Software
Operating System Android 4.1
Things that didn't work for me!
TWRP Custom Recovery
ADB And Fastboot
Installing The Stock ROM From HCL's offcial website
I don't really know if this Post should be posted here!
Thanks for your support and Valuable Help!
Hello I'm new to this forum and I'd like to ask some questions.
I have one of the most unknown phone on the market I guess, it's a Nuu Z8.
I believe there isn't a single thread about the Nuu Z8. Anyway to my point I was looking for a custom ROM (like CyanogenMod) but of course it doesn't support my phone.
Then I started to ask myself and now you guys, could it be that I can use a CyanogenMod ROM that isn't meant to be for my phone but possibly could work because it is made for the same architecture and stuff? (I found a few ROMS made for my architecture)
further specs:
cpu:
- MediaTek MT6752
- ARM Cortex-A53
- 64bit
- ARMv8-A
- 1700MHz
- 8 cores
GPU:
- ARM Mali-T760 MP2
- 2 cores
- 700MHz
RAM:
- 2GB of LPDDR3 800MHz single channel RAM
storage:
-32GB
DUAL sim and sd card
5.5" screen with 1080x1920 pixels
if more specs are needed you have to google:" NUU Moblie Z8 - Specifications devicespecifications . com
Edit: There also isn't a cwm or twrp custom recovery menu made for my phone but I can flash ROMS and ZIP/OTA files using flashfire.
I believe this also means that when I brick my phone I can't install the default ROM because I don't have an custom recovery menu.
Edit2: I believe I was directed from the XDA assist to this Q&A page do correct me if I'm (again) on the wrong side of the forum
Hello. I same you. I have mobile NUU Z8 32 GB, now can not work. when turn on power, screen only run logo N and then stop. I recovery mode but is not succeed. And I try reboot system but not surefire.
Special this is mobilephone not connect with PC.
Ngo Hieu said:
Hello. I same you. I have mobile NUU Z8 32 GB, now can not work. when turn on power, screen only run logo N and then stop. I recovery mode but is not succeed. And I try reboot system but not surefire.
Special this is mobilephone not connect with PC.
Click to expand...
Click to collapse
I don't have my nuu z8 anymore because i broke it repaired it but i couldn't call anymore anyway you have a boot loop (you probably figured that out) and what you should do is download sp flashtool and a stock rom from needrom.com and look up a tutorial on how to use spflashtools.
nuu z8
Gimly161 said:
Hello I'm new to this forum and I'd like to ask some questions.
I have one of the most unknown phone on the market I guess, it's a Nuu Z8.
I believe there isn't a single thread about the Nuu Z8. Anyway to my point I was looking for a custom ROM (like CyanogenMod) but of course it doesn't support my phone.
Then I started to ask myself and now you guys, could it be that I can use a CyanogenMod ROM that isn't meant to be for my phone but possibly could work because it is made for the same architecture and stuff? (I found a few ROMS made for my architecture)
further specs:
cpu:
- MediaTek MT6752
- ARM Cortex-A53
- 64bit
- ARMv8-A
- 1700MHz
- 8 cores
GPU:
- ARM Mali-T760 MP2
- 2 cores
- 700MHz
RAM:
- 2GB of LPDDR3 800MHz single channel RAM
storage:
-32GB
DUAL sim and sd card
5.5" screen with 1080x1920 pixels
if more specs are needed you have to google:" NUU Moblie Z8 - Specifications devicespecifications . com
Edit: There also isn't a cwm or twrp custom recovery menu made for my phone but I can flash ROMS and ZIP/OTA files using flashfire.
I believe this also means that when I brick my phone I can't install the default ROM because I don't have an custom recovery menu.
Edit2: I believe I was directed from the XDA assist to this Q&A page do correct me if I'm (again) on the wrong side of the forum
Click to expand...
Click to collapse
hi,
i was wondering if you ever found a rom for this phone.
i also have it .. the reason im asking is because i am having a lot of problems with the phone and was hoping a different rom might cure the glitches.
do you have any problems with your phone? mine turns off when the battery gets below 60 "%.
google maps was not reliable on local trips around town. so i am hoping you might be able to help
Hello all, I'm creating this thread with all the information that I was able to gather from different threads and sources.
This device is being given away by Claro Argentina as a video stream platform (similar to Netflix?)
The hardware:
MT8127 (Driver detected as MT65xx) (not sure)
Info from vendor
http://www.coship.com/en/ProductView.aspx?id=464
Quad Core 1.5G ARM Cortex A7 11,000DMIPS CPU
Mali MP450 Quad Core GPU
Android 4.4 Kitkat
8GB NAND (up to 32GB)
1GB DDR3 (up to 2GB)
HEVC/H.265 Decoder
Bluetooth 4.0 Lowe Energy
2.4G/5G Dual Band WiFi
Playready DRM
Possible ways to flash it.
1. load scatter file from firmware to SP Tools and click download from PC.
2. Disconnect the usb connected to the PC (use the usb near to the optical output) and also the power cable of the N9090c.
3. Connect the USB (use the usb near to the optical output) to an 2.0 USB of the PC.
4. Connect the power cable to the N9090c.
5. Done!. SP Tools start flashing the firmware.
If does not work there is a jumper inside that box that it seems that put the usb in debug mode.
Put the jumper and try again.
Another possibility is using what appears to be a JTAG port on the board.
Image JTAG
I was able to connect but first shows correct characters and then garbage...
As you can see on image ADB
Current problem, how can we take a full backup of the current firmware???
I'm not able to connect it using Mtk_Droid_Tool_v2.5.3
Sources for the information:
http://foros.3dgames.com.ar/operadoras.487/923710.claro-esta-regalando-android-tv-box.html
For an old coship but the N9090c is discussed at the end.
https://forum.xda-developers.com/android/help/help-mediatek-8563-8658-device-coship-t3187554
Hello Friend! I am finishing a rom stock for this device, I will be sharing it in the forum in a few days...
Regards!
Hi there, I have the same box with Coship n9090 and I tried to flash it with the ROM i found here :
But I have NO wifi , NO Remote control etc... Could someone help me to get it back.
If someone have any solution please share it, thank you.
Hello how are you?
Hello How are you coud you bring the firmware please i need it because my smart tv is broken and the official firmware of claro video its too bad please :crying: :crying: :crying:
if you could sen me an email at [email protected]
Regards!
Stock ROM Coship N9090
Faq88 said:
Hello Friend! I am finishing a rom stock for this device, I will be sharing it in the forum in a few days...
Regards!
Click to expand...
Click to collapse
By any chance, any news on the stock rom for this box thanks in advance.
how to download firmware?
germanarg said:
Hello all, I'm creating this thread with all the information that I was able to gather from different threads and sources.
This device is being given away by Claro Argentina as a video stream platform (similar to Netflix?)
The hardware:
MT8127 (Driver detected as MT65xx) (not sure)
Info from vendor
http://www.coship.com/en/ProductView.aspx?id=464
Quad Core 1.5G ARM Cortex A7 11,000DMIPS CPU
Mali MP450 Quad Core GPU
Android 4.4 Kitkat
8GB NAND (up to 32GB)
1GB DDR3 (up to 2GB)
HEVC/H.265 Decoder
Bluetooth 4.0 Lowe Energy
2.4G/5G Dual Band WiFi
Playready DRM
Possible ways to flash it.
1. load scatter file from firmware to SP Tools and click download from PC.
2. Disconnect the usb connected to the PC (use the usb near to the optical output) and also the power cable of the N9090c.
3. Connect the USB (use the usb near to the optical output) to an 2.0 USB of the PC.
4. Connect the power cable to the N9090c.
5. Done!. SP Tools start flashing the firmware.
If does not work there is a jumper inside that box that it seems that put the usb in debug mode.
Put the jumper and try again.
Another possibility is using what appears to be a JTAG port on the board.
Image JTAG
I was able to connect but first shows correct characters and then garbage...
As you can see on image ADB
Current problem, how can we take a full backup of the current firmware???
I'm not able to connect it using Mtk_Droid_Tool_v2.5.3
Sources for the information:
http://foros.3dgames.com.ar/operadoras.487/923710.claro-esta-regalando-android-tv-box.html
For an old coship but the N9090c is discussed at the end.
https://forum.xda-developers.com/android/help/help-mediatek-8563-8658-device-coship-t3187554
Click to expand...
Click to collapse
Faq88 said:
Hello Friend! I am finishing a rom stock for this device, I will be sharing it in the forum in a few days...
Regards!
Click to expand...
Click to collapse
Any news of this? Because Android version it's too old. I'm unable to install basic apps like Netflix or similar
hello everyone and thankyou for your help ... i have three mediatek tab910 mt6797 tablets i have tried magix,i have tried kingoroot along with a few others and have had zero luck with gaining root access, as of now im not wanting to instal a custom rom i only would like to gain permanate root access so that i can debloat and adjust core speeds etc . For a 10 core 500gb tab its very laggy ,instances force stop on thete own and so on ,im no pc genious and dont know what else to do so some or any help is most welcomed,
Thank you all for your time ...below is the tab specs any other ifo needed ill be more then happy to post as this has been a on going headach
Manufacture
Stack
Model ID
TAB910
Android Version
10.0
Kernel Version
3.10.72+
Battery Capacity
8500 mAh
SoC (Processor)
Architecture
ARM (armv7l)
SoC Model
MediaTek Helio X20/X23/X25/X27
SoC Family
10x ARM Cortex-A7 @2.30 GHz
Frequency
2300 MHz / Min: 728 MHz - Max: 2300 MHz
Main CPU Cores
10 Cores / 10 Threads
Process
20 nm
CPUID
41.0.7.C07.4
Revision
R0P4
Features
SWP HALF THUMB FASTMULT VFP EDSP THUMBEE NEON VFPV3 TLS VFPV4 IDIVA IDIVT
Bogomips
70.76 MIPS
Display (GPU / LCD)
SoC Manufacturer
ARM
SoC Model
Mali-450 MP
OpenGL Ver.
2.0
LCD Size
10.6 inches / 26.9 cm
LCD Resolution
1200 x 1920 pixels
LCD Definition
213 DPI
Memory
RAM
8096 MB (8 GB)
Flash
488281 MB
Embedded Sensor
Sensor #1
BMA056 3-axis Accelerometer
Sensor #2
BMM056 3-axis Magnetic Field sensor
Sensor #3
BMM056 Orientation sensor
Sensor #4
RPR410 Proximity Sensor
Sensor #5
RPR410 Light Sensor
Hello I got a similar tablet with the same name Mediatek TAB910. however mt6592
I succeeded to root it with kingoroot. then changed kigoroot superuser with su superuser.
I was trying to upgrade android version (cause it was a fake android 12: it was just lollipop 5.1).
When I tried to install TWRP, I think I brick the tab
Now it's not recognized on my laptop, with a boot loop (I guess, since i only hear it popping up and down when linked through usb) Mediatek usb Port (COM XX). Dark screen.
tried several solutions to the resurruction, but none yet working.
Any help would be appreciated, even suggesting to get rid of it.
Update : my android tablet is stuck on android text booting
Update : it works i flashed files found on the net (userdata and cache). Then wiped e-mmc by holding power and volume down (chinese menu).
However am back to lollipop 5.1.
Gonna try to find a solution after taking a break
I'll look at all the numbers on mine and attach a pic later in if every thing corresponds with your maby you can leave some detail on the process you used to gain perm root cause I've tried everything with nobsuccess
I know on these media Tek you need to use spflash tool to create a scatter file before making a custom recovery have you looked into that? I'm not really familiar with the process on a media Tek I've looked onlin e and read a few diff arrivals but Tobe honest I was all but stumpped
I followed the steps on the vid
How to Root every MTK China Phone - Readback With SP-Flash("
")
I downloaded 3 versions of sp-flash so it worked.
However couldn't get the file (loader.bin) I did it a week after with a russian tool.
And I couldn't root via twrp since i don't have it. I rooted via kingoroot. (i needed to launch the app 3 times before it works).
Now am back to lolipop. If i try to unlock the bootloader, i am stuck in bootloop, and I need to restore a loked bootloader I guess no way to upgrade. Any ideas how to get android 10?
dirk1nowitzki said:
I followed the steps on the vid
How to Root every MTK China Phone - Readback With SP-Flash("
")
I downloaded 3 versions of sp-flash so it worked.
However couldn't get the file (loader.bin) I did it a week after with a russian tool.
And I couldn't root via twrp since i don't have it. I rooted via kingoroot. (i needed to launch the app 3 times before it works).
Now am back to lolipop. If i try to unlock the bootloader, i am stuck in bootloop, and I need to restore a loked bootloader I guess no way to upgrade. Any ideas how to get android 10?
Click to expand...
Click to collapse
Nope no idea not very tec savy I'm stuck
did you try fill ram memory test?
I uploaded files if that can help you "https://www.needrom.com/download/mt6592-tab910/"
dirk1nowitzki said:
did you try fill ram memory test?
Click to expand...
Click to collapse
I'll take a look at it thank you
dirk1nowitzki i has joined needrom but the system.img is missing..can u upload to provide site..i messed up my tab910 now no firmware..but either still work with SP Tools.