Good day!
In General this problem, there is a Chinese table
lenovo Model: S6000 D
Processor Model: MT6572 (MTK6582 1.5 GHz fake)
Operating System: Android 4.2
Display resolution: 1280x720
Tablet Data Capacity: 32GB
Memory Capacity: 2GB
Cell Capacity:6500
Network Communiction: Built-in 3G,Bluetooth,Wifi
Screen Size: 10"
Extend Port: DC Jack,Earphone Jack,OTG,SD Card,TF card,USB
Camera: Second Webcam
Touch Screen Type: Capacitive Screen
Processor Main Frequency: Quad Core
Feature: GPS,Multi Touch,HDMI,G Sensor,Phone Call,FM,OTG,Ultra Slim,Dual Cameras
Front Webcam Pixels: Front 2.0 MP+Back 5.0 M
d101_mb_v2.0
After formatting and firmware started to give the error message when you start Boot error!!!! There is a backup with similar tablets. With different backups produces two different error, Boot Error and decrypt failed boot error.
The solution to this problem is?
I got same samsung clone i9190 sw problem. I faced same error on dragon , piranha and sp_flashtool. but one day I updated my pc to windows 8.1 x64 and then I let the pc install mtk preloder driver. And result is Positive. It connect with Pc withwout no error.
SO TRY WITH WINDOWS 8.1 PRO 64 BIT (FOR THIS MODEL ONLY)
But sad thing is that that time I could not find flash file for that phone. I returned that phone to customer.
But the funny thing is that particular this error comes only for this samsung clone mt6572 based phone.
I have a problem with loading the tablet. firmware without errors
Related
Dear fellow members. I'm exhausted trying to find my tablet ROM. I hope someone can give me a hand, thanks beforehand -
my tablet is 7 "(1024x600) ALPS brand, m874 model MTK6582 Cortex A7 CPU dual core (according Z-CPU when the tablet was walking) but the physical chip on the motherboard is a MT8312v, Mali 400 GPU, 1GB of RAM, 8GB ROM, Dual Sim 3G.
Printed in the mother says M874MB v1.3 A
I tried to flash with flash tool SP but get errors 4008 and 4010).
Apparently not match the addresses of the user data partitions in emmc.
Try several roms that claim to be for 874, but nothing. The tablet PC recognizes the COM port, makes the red bar and stays there for a while and jump mistake minute 4010 or 4008
If anyone can help or offer any proof is appreciated.
my phone got bootloop, and im having a problem fixing it
i tried to use sp flash tool, but my problem is when i connect my phone into pc it wont detect but when i turn my phone to fastboot it got detected but drivers is not successfuly installed..... and also on the TuT it says phone must remove battery so i cant fix it?
my phone keeps on rebooting when i turn on e.g i turn it on and stuck on logo for about 15 secs+ then it reboot continuesly after the logo, i cant go on recovery mode also i can onlg go to fastboot mode without automaticaly rebooting,,
please help me if i can fix it uaing fastboot mode?
@StuckXIV please tell about your phone name model etc, please be specific.
phone model was mentioned on the title but ill provide some specs wait
Salman Al-Badgail said:
@StuckXIV please tell about your phone name model etc, please be specific.
Click to expand...
Click to collapse
Android 4.4 KitKat
5-inch IPS LCD (540×960 qHD), ~220ppi
1.3GHz quad-core MediaTek MT6582 processor
Mali-400 MP2 GPU
1GB RAM
8GB internal storage
microSD support up to 64GB
8-megapixel main camera, with autofocus and LED flash
5-megapixel front camera
Wi-Fi 802.11 b/g/n
Dual SIM, dual standby
3G HSPA+
Bluetooth 4.0
GPS, A-GPS
Dimensions: 145.8 x 73.1 x 8.73mm
2000mAh battery
StuckXIV said:
Android 4.4 KitKat
5-inch IPS LCD (540Ã?960 qHD), ~220ppi
1.3GHz quad-core MediaTek MT6582 processor
Mali-400 MP2 GPU
1GB RAM
8GB internal storage
microSD support up to 64GB
8-megapixel main camera, with autofocus and LED flash
5-megapixel front camera
Wi-Fi 802.11 b/g/n
Dual SIM, dual standby
3G HSPA+
Bluetooth 4.0
GPS, A-GPS
Dimensions: 145.8 x 73.1 x 8.73mm
2000mAh battery
Click to expand...
Click to collapse
Device name
While booting from USB I got this error:
Booting the kernel.
[0.219490] intel_powerclump: Intel powerclump does not run on the family 6 model 23
[0.220313] intel_rapl: driver does not support CPU family 6 model 23
As I understand it's not my fault and there's nothing I can do right?
No hardware info = no help.
Good luck.
Doesn't really matter. My first try was unsuccessful (64bit version) by second one (32bit vesion) wasn't. I successfully booted but because of my slow pendrive it took a lot of time and was very leggy. That's why it doesn't matter anymore...
Im in the same situation
same happened to me also
PC SPECS
Mobo: Asus Stix Z270F Gaming
Cpu: Intel i7 7700k
Ram: Corsair Vengeance Led 16GB (2 x 8GB) DDR4 DRAM 3000MHz
Psu: Corsair Cx750m
Sucks! 2 Netbooks and Tablet PC Dell XT, N270, N450 and C2D wont install (Resident or Guest)... Freeze in boot!
hello everyone and thankyou for your help ... i have three mediatek tab910 mt6797 tablets i have tried magix,i have tried kingoroot along with a few others and have had zero luck with gaining root access, as of now im not wanting to instal a custom rom i only would like to gain permanate root access so that i can debloat and adjust core speeds etc . For a 10 core 500gb tab its very laggy ,instances force stop on thete own and so on ,im no pc genious and dont know what else to do so some or any help is most welcomed,
Thank you all for your time ...below is the tab specs any other ifo needed ill be more then happy to post as this has been a on going headach
Manufacture
Stack
Model ID
TAB910
Android Version
10.0
Kernel Version
3.10.72+
Battery Capacity
8500 mAh
SoC (Processor)
Architecture
ARM (armv7l)
SoC Model
MediaTek Helio X20/X23/X25/X27
SoC Family
10x ARM Cortex-A7 @2.30 GHz
Frequency
2300 MHz / Min: 728 MHz - Max: 2300 MHz
Main CPU Cores
10 Cores / 10 Threads
Process
20 nm
CPUID
41.0.7.C07.4
Revision
R0P4
Features
SWP HALF THUMB FASTMULT VFP EDSP THUMBEE NEON VFPV3 TLS VFPV4 IDIVA IDIVT
Bogomips
70.76 MIPS
Display (GPU / LCD)
SoC Manufacturer
ARM
SoC Model
Mali-450 MP
OpenGL Ver.
2.0
LCD Size
10.6 inches / 26.9 cm
LCD Resolution
1200 x 1920 pixels
LCD Definition
213 DPI
Memory
RAM
8096 MB (8 GB)
Flash
488281 MB
Embedded Sensor
Sensor #1
BMA056 3-axis Accelerometer
Sensor #2
BMM056 3-axis Magnetic Field sensor
Sensor #3
BMM056 Orientation sensor
Sensor #4
RPR410 Proximity Sensor
Sensor #5
RPR410 Light Sensor
Hello I got a similar tablet with the same name Mediatek TAB910. however mt6592
I succeeded to root it with kingoroot. then changed kigoroot superuser with su superuser.
I was trying to upgrade android version (cause it was a fake android 12: it was just lollipop 5.1).
When I tried to install TWRP, I think I brick the tab
Now it's not recognized on my laptop, with a boot loop (I guess, since i only hear it popping up and down when linked through usb) Mediatek usb Port (COM XX). Dark screen.
tried several solutions to the resurruction, but none yet working.
Any help would be appreciated, even suggesting to get rid of it.
Update : my android tablet is stuck on android text booting
Update : it works i flashed files found on the net (userdata and cache). Then wiped e-mmc by holding power and volume down (chinese menu).
However am back to lollipop 5.1.
Gonna try to find a solution after taking a break
I'll look at all the numbers on mine and attach a pic later in if every thing corresponds with your maby you can leave some detail on the process you used to gain perm root cause I've tried everything with nobsuccess
I know on these media Tek you need to use spflash tool to create a scatter file before making a custom recovery have you looked into that? I'm not really familiar with the process on a media Tek I've looked onlin e and read a few diff arrivals but Tobe honest I was all but stumpped
I followed the steps on the vid
How to Root every MTK China Phone - Readback With SP-Flash("
")
I downloaded 3 versions of sp-flash so it worked.
However couldn't get the file (loader.bin) I did it a week after with a russian tool.
And I couldn't root via twrp since i don't have it. I rooted via kingoroot. (i needed to launch the app 3 times before it works).
Now am back to lolipop. If i try to unlock the bootloader, i am stuck in bootloop, and I need to restore a loked bootloader I guess no way to upgrade. Any ideas how to get android 10?
dirk1nowitzki said:
I followed the steps on the vid
How to Root every MTK China Phone - Readback With SP-Flash("
")
I downloaded 3 versions of sp-flash so it worked.
However couldn't get the file (loader.bin) I did it a week after with a russian tool.
And I couldn't root via twrp since i don't have it. I rooted via kingoroot. (i needed to launch the app 3 times before it works).
Now am back to lolipop. If i try to unlock the bootloader, i am stuck in bootloop, and I need to restore a loked bootloader I guess no way to upgrade. Any ideas how to get android 10?
Click to expand...
Click to collapse
Nope no idea not very tec savy I'm stuck
did you try fill ram memory test?
I uploaded files if that can help you "https://www.needrom.com/download/mt6592-tab910/"
dirk1nowitzki said:
did you try fill ram memory test?
Click to expand...
Click to collapse
I'll take a look at it thank you
dirk1nowitzki i has joined needrom but the system.img is missing..can u upload to provide site..i messed up my tab910 now no firmware..but either still work with SP Tools.
Hello my tv box does not give any kind of life after flashing attempt, the only application that recognizes me on the pc is amlogic burning tool but all firmwares remain at 2%,7%,8%, etc.. Bach tool and android tool do not recognize me as if it was not connected my tv box is a mxq pro 4k amlogic s905x quad core a53, android 7.1.2, cpu 64 bit, 1 gb ram and 8 gb storage.
I also tried touching pins 4-5, 5-6 and 7-8 as they say on the internet but it didn't work.
Text on board: S905XQ4_V1.0 2017.11.23
Nand flash: ESSENCORE i3t-8GQ8T2h5TARC
Wifi chip: SV6051P TTB1805 1WT98
White sticker text: AK1805AB-3 D1/F8G 2D1805A26QC S905X SX HYH9
extra info: when it was turned on at startup it showed the amlogic 905w logo but it's really s905x.