[HELP] bootloop SKK Pheonix G1 - Android Q&A, Help & Troubleshooting

my phone got bootloop, and im having a problem fixing it
i tried to use sp flash tool, but my problem is when i connect my phone into pc it wont detect but when i turn my phone to fastboot it got detected but drivers is not successfuly installed..... and also on the TuT it says phone must remove battery so i cant fix it?
my phone keeps on rebooting when i turn on e.g i turn it on and stuck on logo for about 15 secs+ then it reboot continuesly after the logo, i cant go on recovery mode also i can onlg go to fastboot mode without automaticaly rebooting,,
please help me if i can fix it uaing fastboot mode?

@StuckXIV please tell about your phone name model etc, please be specific.

phone model was mentioned on the title but ill provide some specs wait

Salman Al-Badgail said:
@StuckXIV please tell about your phone name model etc, please be specific.
Click to expand...
Click to collapse
Android 4.4 KitKat
5-inch IPS LCD (540×960 qHD), ~220ppi
1.3GHz quad-core MediaTek MT6582 processor
Mali-400 MP2 GPU
1GB RAM
8GB internal storage
microSD support up to 64GB
8-megapixel main camera, with autofocus and LED flash
5-megapixel front camera
Wi-Fi 802.11 b/g/n
Dual SIM, dual standby
3G HSPA+
Bluetooth 4.0
GPS, A-GPS
Dimensions: 145.8 x 73.1 x 8.73mm
2000mAh battery

StuckXIV said:
Android 4.4 KitKat
5-inch IPS LCD (540Ã?960 qHD), ~220ppi
1.3GHz quad-core MediaTek MT6582 processor
Mali-400 MP2 GPU
1GB RAM
8GB internal storage
microSD support up to 64GB
8-megapixel main camera, with autofocus and LED flash
5-megapixel front camera
Wi-Fi 802.11 b/g/n
Dual SIM, dual standby
3G HSPA+
Bluetooth 4.0
GPS, A-GPS
Dimensions: 145.8 x 73.1 x 8.73mm
2000mAh battery
Click to expand...
Click to collapse
Device name

Related

MT6572 when you run Boot Error

Good day!
In General this problem, there is a Chinese table
lenovo Model: S6000 D
Processor Model: MT6572 (MTK6582 1.5 GHz fake)
Operating System: Android 4.2
Display resolution: 1280x720
Tablet Data Capacity: 32GB
Memory Capacity: 2GB
Cell Capacity:6500
Network Communiction: Built-in 3G,Bluetooth,Wifi
Screen Size: 10"
Extend Port: DC Jack,Earphone Jack,OTG,SD Card,TF card,USB
Camera: Second Webcam
Touch Screen Type: Capacitive Screen
Processor Main Frequency: Quad Core
Feature: GPS,Multi Touch,HDMI,G Sensor,Phone Call,FM,OTG,Ultra Slim,Dual Cameras
Front Webcam Pixels: Front 2.0 MP+Back 5.0 M
d101_mb_v2.0
After formatting and firmware started to give the error message when you start Boot error!!!! There is a backup with similar tablets. With different backups produces two different error, Boot Error and decrypt failed boot error.
The solution to this problem is?
I got same samsung clone i9190 sw problem. I faced same error on dragon , piranha and sp_flashtool. but one day I updated my pc to windows 8.1 x64 and then I let the pc install mtk preloder driver. And result is Positive. It connect with Pc withwout no error.
SO TRY WITH WINDOWS 8.1 PRO 64 BIT (FOR THIS MODEL ONLY)
But sad thing is that that time I could not find flash file for that phone. I returned that phone to customer.
But the funny thing is that particular this error comes only for this samsung clone mt6572 based phone.
I have a problem with loading the tablet. firmware without errors

How can I fix my HCL ME Connect 3G 2.0

I have an old (Not really that old, it is still available to buy now) HCL ME Connect 3G 2.0. I have rooted it and install a Custom CWM Recovery for it (CWM Automade by rua1) And I have tried to install a Custom ROM, Unfortuantely my Device is now Bricked. It will boot into The HCL Logo, But when I use the Volume Up and Power Button to Get into the CWM Recovery I could get into it.
Now I have tried many ROMS and the Stock One they say are suitable for it but when I try to install some of them CWM Log says - [Unpacking Update, Installing Updates, Failed To Install Update Package Bad] I have tried many other Custom Recoveries like TWRP that is said to work with my Device. But Unfortunately its not working too.
I have tried to install ADB Drivers And Fastboot Drivers to install the ROM Directly and it dectects the Device as - [??????Unknown Permissions] and when I try to run "adb reboot" or anything similar The CMD Says it doesn't have the permission to do that.
I do not understand what's wrong with it
It would be Great IF ANY OF THE XDA MEMBERS COULD HELP ME OUT! THANK YOU!
My Device Specs(Although it's not that Great)
Highlights
- 1.2 GHz Cortex A9 Dual Core Processor
- 1 GB DDR3 RAM
- 7 Inch Capacitive Touchscreen Display
- 3.2 MP Rear Camera
- 0.3 MP Front Camera
- Dual SIM Slot
- Blutooth/FM
- Wi-Fi 802.11 B/G/N
- Mini HDMI
- 3500 MAh Battery.
Technology / Frequency Bands GSM : 850/900/1800/1900 MHz UMTS : 2100 MHz
Battery
Type Li - Po
Capacity 3500 mAh
Standby -
Talktime -
Built
Dimensions -
Weight 315 g
Form Factor bar
Colors Silver
Display
Size 1024x600 pixels
Type color : TFT
Colors 16000000 colors
Secondary Display no
Camera / Imaging / Video
Camera Yes 3.0 Megapixel
Resolution 2048x1536 pixels
Zoom yes
Flash no
Video Out yes
Secondary Camera yes
Secondary Camera
Flash no
Connectivity
Bluetooth Yes
Irda No
Wlan/Wi-fi Yes
USB yes
GPS yes
Data
GPRS Yes
EDGE Yes
3G Yes
Internet Browsing Yes , Android Webkit
Media
Audio Playback Yes
Video Playback Yes
Ringtones MP3 and Polyphonic
FM Radio Yes
3.5mm Headphone Jack yes
Memory
Inbuilt 4 GB
Memory Slot Yes microSD/TransFlash
Messaging
SMS Yes
MMS Yes
Email Yes
Software
Operating System Android 4.1
Things that didn't work for me!
TWRP Custom Recovery
ADB And Fastboot
Installing The Stock ROM From HCL's offcial website
I don't really know if this Post should be posted here!
Thanks for your support and Valuable Help!

Phonetab Alps M874

Dear fellow members. I'm exhausted trying to find my tablet ROM. I hope someone can give me a hand, thanks beforehand -
my tablet is 7 "(1024x600) ALPS brand, m874 model MTK6582 Cortex A7 CPU dual core (according Z-CPU when the tablet was walking) but the physical chip on the motherboard is a MT8312v, Mali 400 GPU, 1GB of RAM, 8GB ROM, Dual Sim 3G.
Printed in the mother says M874MB v1.3 A
I tried to flash with flash tool SP but get errors 4008 and 4010).
Apparently not match the addresses of the user data partitions in emmc.
Try several roms that claim to be for 874, but nothing. The tablet PC recognizes the COM port, makes the red bar and stays there for a while and jump mistake minute 4010 or 4008
If anyone can help or offer any proof is appreciated.

custom rom noob help needed NUU Z8

Hello I'm new to this forum and I'd like to ask some questions.
I have one of the most unknown phone on the market I guess, it's a Nuu Z8.
I believe there isn't a single thread about the Nuu Z8. Anyway to my point I was looking for a custom ROM (like CyanogenMod) but of course it doesn't support my phone.
Then I started to ask myself and now you guys, could it be that I can use a CyanogenMod ROM that isn't meant to be for my phone but possibly could work because it is made for the same architecture and stuff? (I found a few ROMS made for my architecture)
further specs:
cpu:
- MediaTek MT6752
- ARM Cortex-A53
- 64bit
- ARMv8-A
- 1700MHz
- 8 cores
GPU:
- ARM Mali-T760 MP2
- 2 cores
- 700MHz
RAM:
- 2GB of LPDDR3 800MHz single channel RAM
storage:
-32GB
DUAL sim and sd card
5.5" screen with 1080x1920 pixels
if more specs are needed you have to google:" NUU Moblie Z8 - Specifications devicespecifications . com
Edit: There also isn't a cwm or twrp custom recovery menu made for my phone but I can flash ROMS and ZIP/OTA files using flashfire.
I believe this also means that when I brick my phone I can't install the default ROM because I don't have an custom recovery menu.
Edit2: I believe I was directed from the XDA assist to this Q&A page do correct me if I'm (again) on the wrong side of the forum
Hello. I same you. I have mobile NUU Z8 32 GB, now can not work. when turn on power, screen only run logo N and then stop. I recovery mode but is not succeed. And I try reboot system but not surefire.
Special this is mobilephone not connect with PC.
Ngo Hieu said:
Hello. I same you. I have mobile NUU Z8 32 GB, now can not work. when turn on power, screen only run logo N and then stop. I recovery mode but is not succeed. And I try reboot system but not surefire.
Special this is mobilephone not connect with PC.
Click to expand...
Click to collapse
I don't have my nuu z8 anymore because i broke it repaired it but i couldn't call anymore anyway you have a boot loop (you probably figured that out) and what you should do is download sp flashtool and a stock rom from needrom.com and look up a tutorial on how to use spflashtools.
nuu z8
Gimly161 said:
Hello I'm new to this forum and I'd like to ask some questions.
I have one of the most unknown phone on the market I guess, it's a Nuu Z8.
I believe there isn't a single thread about the Nuu Z8. Anyway to my point I was looking for a custom ROM (like CyanogenMod) but of course it doesn't support my phone.
Then I started to ask myself and now you guys, could it be that I can use a CyanogenMod ROM that isn't meant to be for my phone but possibly could work because it is made for the same architecture and stuff? (I found a few ROMS made for my architecture)
further specs:
cpu:
- MediaTek MT6752
- ARM Cortex-A53
- 64bit
- ARMv8-A
- 1700MHz
- 8 cores
GPU:
- ARM Mali-T760 MP2
- 2 cores
- 700MHz
RAM:
- 2GB of LPDDR3 800MHz single channel RAM
storage:
-32GB
DUAL sim and sd card
5.5" screen with 1080x1920 pixels
if more specs are needed you have to google:" NUU Moblie Z8 - Specifications devicespecifications . com
Edit: There also isn't a cwm or twrp custom recovery menu made for my phone but I can flash ROMS and ZIP/OTA files using flashfire.
I believe this also means that when I brick my phone I can't install the default ROM because I don't have an custom recovery menu.
Edit2: I believe I was directed from the XDA assist to this Q&A page do correct me if I'm (again) on the wrong side of the forum
Click to expand...
Click to collapse
hi,
i was wondering if you ever found a rom for this phone.
i also have it .. the reason im asking is because i am having a lot of problems with the phone and was hoping a different rom might cure the glitches.
do you have any problems with your phone? mine turns off when the battery gets below 60 "%.
google maps was not reliable on local trips around town. so i am hoping you might be able to help

(Solved) Need help with a BLU Grand 5.5 HD

I have recently acquired a BLU Grand 5.5 HD smartphone. I am currently on stock Android Marshmallow 6.0. It seems to have been released in July 2016. Here are the specs courtesy of GSM Arena:
NETWORK: Technology (GSM / HSPA)
LAUNCH: Announced 2016, July
Status: Available. Released 2016, July
BODY: Dimensions 155.2 x 79 x 9.6 mm (6.11 x 3.11 x 0.38 in)
Weight - 188 g (6.63 oz)
SIM: Dual SIM (Micro-SIM, dual stand-by)
DISPLAY: Type IPS LCD capacitive touchscreen, 16M colors;
Size: 5.5 inches (~68.0% screen-to-body ratio)
Resolution: 720 x 1280 pixels (~267 ppi pixel density)
Multitouch: Yes
PLATFORM OS: Android OS, v6.0 (Marshmallow)
Chipset Mediatek MT6580
CPU Quad-core 1.3 GHz Cortex-A7
GPU Mali-400
MEMORY: Card slot microSD, up to 64 GB
Internal 8 GB, 1 GB RAM
CAMERA: Primary 8 MP, autofocus, LED flash
Features Geo-tagging, touch focus, face/smile detection; Video [email protected];
Secondary 5 MP, LED flash
SOUND: Alert types Vibration; MP3, WAV ringtones
Loudspeaker (Yes, with stereo speakers)
3.5mm jack (Yes)
COMMS WLAN: Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
Bluetooth v4.0, A2DP
GPS Yes, with A-GPS
Radio FM radio
USB microUSB v2.0
FEATURES: Sensors Accelerometer, proximity
Messaging SMS(threaded view), MMS, Email, Push Email, IM
Browser HTML5
Java No
- MP4/H.264 player
- MP3/eAAC+/WAV/Flac player
- Document viewer
- Photo/video editor
BATTERY: Removable Li-Po 2500 mAh battery
Stand-by Up to 725 h (2G) / Up to 625 h (3G)
Talk time Up to 26 h (2G) / Up to 16 h (3G)
I am having a few issues, and I was hoping to get some help from the XDA Community. 1) I cannot find the stock firmware for this phone anywhere. Huge problem because I can't root without it. 2) I can't find any support for rooting this phone. I mean not even Kingroot has a solution! I have searched methods for rooting from the OS (Marshmallow), the chipset (MT6580), and the phone itself (nothing available at all). So, any help with locating the firmware, and a means to root this phone would be greatly appreciated. Thanks in advance.
DFleur
I have the Blu Grand HD (not 5.5 G030), i just bought this phone here in mexico for 100 dlls, its blu_G010_v3 and i want the same thing, i want to root mine but there is nothing in the web.. maybe is too new and not very popular but i need to root so any help would be great. Btw kingo and other did not work.
---------- Post added at 04:35 PM ---------- Previous post was at 04:34 PM ----------
DFleur said:
I have recently acquired a BLU Grand 5.5 HD smartphone. I am currently on stock Android Marshmallow 6.0. It seems to have been released in July 2016. Here are the specs courtesy of GSM Arena:
NETWORK: Technology (GSM / HSPA)
LAUNCH: Announced 2016, July
Status: Available. Released 2016, July
BODY: Dimensions 155.2 x 79 x 9.6 mm (6.11 x 3.11 x 0.38 in)
Weight - 188 g (6.63 oz)
SIM: Dual SIM (Micro-SIM, dual stand-by)
DISPLAY: Type IPS LCD capacitive touchscreen, 16M colors;
Size: 5.5 inches (~68.0% screen-to-body ratio)
Resolution: 720 x 1280 pixels (~267 ppi pixel density)
Multitouch: Yes
PLATFORM OS: Android OS, v6.0 (Marshmallow)
Chipset Mediatek MT6580
CPU Quad-core 1.3 GHz Cortex-A7
GPU Mali-400
MEMORY: Card slot microSD, up to 64 GB
Internal 8 GB, 1 GB RAM
CAMERA: Primary 8 MP, autofocus, LED flash
Features Geo-tagging, touch focus, face/smile detection; Video [email protected];
Secondary 5 MP, LED flash
SOUND: Alert types Vibration; MP3, WAV ringtones
Loudspeaker (Yes, with stereo speakers)
3.5mm jack (Yes)
COMMS WLAN: Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
Bluetooth v4.0, A2DP
GPS Yes, with A-GPS
Radio FM radio
USB microUSB v2.0
FEATURES: Sensors Accelerometer, proximity
Messaging SMS(threaded view), MMS, Email, Push Email, IM
Browser HTML5
Java No
- MP4/H.264 player
- MP3/eAAC+/WAV/Flac player
- Document viewer
- Photo/video editor
BATTERY: Removable Li-Po 2500 mAh battery
Stand-by Up to 725 h (2G) / Up to 625 h (3G)
Talk time Up to 26 h (2G) / Up to 16 h (3G)
I am having a few issues, and I was hoping to get some help from the XDA Community. 1) I cannot find the stock firmware for this phone anywhere. Huge problem because I can't root without it. 2) I can't find any support for rooting this phone. I mean not even Kingroot has a solution! I have searched methods for rooting from the OS (Marshmallow), the chipset (MT6580), and the phone itself (nothing available at all). So, any help with locating the firmware, and a means to root this phone would be greatly appreciated. Thanks in advance.
DFleur
Click to expand...
Click to collapse
@DFleur While searching found this that may help you http://rootoreviews.com/root-BLU-Grand-5.5-HD-install-twrp-custom-recovery, dont know if is real but is something
Nah Doesn't work. I tried those recoveries...
I tried to flash the recoveries recommended for phones with similar resolution. That didn't work at all. I tried everything from Framaroot to King Root to Android Kitchen. Nothing! I have the stock rom now, and tool to rewrite the MAC, S/N, and IMEI. That's as far as I've gotten.
mexguytj said:
I have the Blu Grand HD (not 5.5 G030), i just bought this phone here in mexico for 100 dlls, its blu_G010_v3 and i want the same thing, i want to root mine but there is nothing in the web.. maybe is too new and not very popular but i need to root so any help would be great. Btw kingo and other did not work.
---------- Post added at 04:35 PM ---------- Previous post was at 04:34 PM ----------
@DFleur While searching found this that may help you http://rootoreviews.com/root-BLU-Grand-5.5-HD-install-twrp-custom-recovery, dont know if is real but is something
Click to expand...
Click to collapse
Primo N2 recovery works
Look for TWRP 3.0.2 Recovery For Primo N2 By Nayeem Khan.img and SuperSU-v2.78-201609011115.zip or newer should do it, I got a Blu Grand G030L and it worked. uploaded.net/file/oi9j7hwy has the .img file and others.
Need help!
gessler2244 said:
Look for TWRP 3.0.2 Recovery For Primo N2 By Nayeem Khan.img and SuperSU-v2.78-201609011115.zip or newer should do it, I got a Blu Grand G030L and it worked. uploaded.net/file/oi9j7hwy has the .img file and others.
Click to expand...
Click to collapse
May I do install with:
fastboot flash recovery twrp.img
after install SuperSU with TWRP?
Thanks!
Angel-MAO
Yes exactly. Of course you need to take care of: USB Debugging on, Developer options -> OEM unlock. (turn it on).
Then on adb shell fastboot oem unlock, keep an eye on display, cel. will ask you to confirm, after that flash image and boot into TWRP.
Mine got in a bootloop, but I think I made something wrong, might or might not happen to you.... after some reboots and playing with vol up down buttons when booting I managed to get into TWRP, did a format of the data partition, installed supersu and rebooted. All well and rooted.
Dosen't WORD!
gessler2244 said:
Yes exactly. Of course you need to take care of: USB Debugging on, Developer options -> OEM unlock. (turn it on).
Then on adb shell fastboot oem unlock, keep an eye on display, cel. will ask you to confirm, after that flash image and boot into TWRP.
Mine got in a bootloop, but I think I made something wrong, might or might not happen to you.... after some reboots and playing with vol up down buttons when booting I managed to get into TWRP, did a format of the data partition, installed supersu and rebooted. All well and rooted.
Click to expand...
Click to collapse
Well, I do step by step many times... but, dosen't work any times!
BLU Grand 5.5 HD (G030L)
1) fastboot oem unlock ----> (this ERASE ALL data phone) OK!!!
2) fastboot flash recovery twrp.img ----> Info WRITE OK!!!
3) reboot... ok!!!
4) Power in recovery mode... SAME builder program on RECOVERY (NOT twrp)!!!
Wating for a soluction!!!
adb show devices (just to to check status of cel.)
adb reboot recovery
fastboot oem unlock
fastboot flash recovery TWRP 3.0.2 Recovery For Primo N2 By Nayeem Khan.img
adb reboot recovery
Definitely worked on my Blu, you can look for another procedure explained on a site from Bangladesh or something, just google for TWRP 3.0.2 Recovery For Primo N2 By Nayeem Khan.img+nayeemkhanxda. Did you get a message on cel. to confirm unlocking bootloader when doing the fastboot oem unlock command ?
gessler2244 said:
adb show devices (just to to check status of cel.)
adb reboot recovery
fastboot oem unlock
fastboot flash recovery TWRP 3.0.2 Recovery For Primo N2 By Nayeem Khan.img
adb reboot recovery
Definitely worked on my Blu, you can look for another procedure explained on a site from Bangladesh or something, just google for TWRP 3.0.2 Recovery For Primo N2 By Nayeem Khan.img+nayeemkhanxda. Did you get a message on cel. to confirm unlocking bootloader when doing the fastboot oem unlock command ?
Click to expand...
Click to collapse
Yes, I got files from your link!
TWRP 3.0.2 Recovery For Primo N2 By Nayeem Khan.img
BETA-SuperSU-v2.74-2-20160519174328.zip
SP_Flash_Tool_exe_Windows_v5.1516.00
Yes, fastboot unlock was OK!
Thanks!
Try to install TWRP Manager, available in play store . In TWRP Manager try to Reboot > Reboot to Recovery. On my device I can only boot into recovery by adb shell or that Manager. By Vol and Power Keys no way, don´t know why. Give that a try. I will receive in a week or so another device, will unroot that also and pay more attention to the steps necessary, and then write a detailed how to.
Your way worked like a charm!
gessler2244 said:
Look for TWRP 3.0.2 Recovery For Primo N2 By Nayeem Khan.img and SuperSU-v2.78-201609011115.zip or newer should do it, I got a Blu Grand G030L and it worked. uploaded.net/file/oi9j7hwy has the .img file and others.
Click to expand...
Click to collapse
Thank you. I found the TWRP and SuperSu doing a quick Google search. I ended up flashing TWRP using an MTK file from v.11, and the TWRP image you told me to download. I used SP Flash Tool v5.1620. I placed the SuperSu on my external SD card. After flashing TWRP I booted right into recovery and installed SuperSU. If you do a factory reset it will remove root. After all that, I am officially rooted, and verified by Root Checker!
As a side note I found a nice way to boot into TWRP, and I want to post it here. If you have a twrp recovery image open up ADB. Type ADB --> Devices to confirm connecivity. Next boot to the bootloader. Once there type in: fastboot boot "imagename.img" (without quotes). This will take you into recovery but you will have problems with /data being inaccessible.
So next question...are there any custom ROMs for this yet?
I could not do root
I would to do a step by step installation of root so that we can understand
voçê poderia ensianar como fazer o root por favor
Can I send you my phone to root for me
Sent from my SM-S820L using Xparent BlueTapatalk 2
gessler2244 said:
While searching found this that may help you http://rootoreviews.com/root-BLU-Grand-5.5-HD-install-twrp-custom-recovery, dont know if is real but is something
Click to expand...
Click to collapse
Those instructions direct you to a TWRP download page that doesn't show any versions for the BLU phones, or for the Walton Primo N2.
I have a BLU Studio Selfie 2, and compared the hardware and software specs to the Primo N2. They appear to have the same CPU, GPU, and chipset. Memory sizes are the same as well. My phone is running Android 6.0 (even though most online specs show it as 5.1), which is the same version the Primo N2 shows. Given all of this, can I (relatively) safely assume the method you describe below will work for me?
gessler2244 said:
Look for TWRP 3.0.2 Recovery For Primo N2 By Nayeem Khan.img and SuperSU-v2.78-201609011115.zip or newer should do it, I got a Blu Grand G030L and it worked. uploaded.net/file/oi9j7hwy has the .img file and others.
Click to expand...
Click to collapse
If this won't work, or there is anything I should be aware of before going down that path, I would greatly appreciate your input!
rooted mine with twrp recovery.img flash sp-tools use same scatter after full backup just swap the stock recovery with the twrp one and flash but only tick recovery after do supersu.zip and rooted ok use this guide: http_s://neopodapsi.c_om/how-to-root-blu-grand-5-5-hd/
Hello, where can I find the firmware for the device BLU GRAND X (G090)
Thanks for attention)
TWRP 3.0.2 Recovery For Primo N2 By Nayeem Khan.img is no longer available on the file sharing site
Is there a custom rom out there for the BLU GRAND 5.5HD? The stock ROM seems to be failing to use external SD for data migration once its full... So a custom ROM would do...
Thanx

Categories

Resources