I've been out of the forums for awhile and out of touch with things. Is there a Jelly Bean ROM for the Note where the S Pen and everything works, I guess a stock based ROM? Thanks. And any recommendations on kernels? I believe I was using dagkernel 0.2 last.
The Paranoid Android ROM from JamieD can use SPen. I am sure you are aware that unless they are a TouchWiz based Mod with the apps, you will have to find alternatives.
That is the ROM I use. There is a Kernel available for it as well, but I dont feel the need to OC so I stay on the stock Kernel.
DTre909 said:
I've been out of the forums for awhile and out of touch with things. Is there a Jelly Bean ROM for the Note where the S Pen and everything works, I guess a stock based ROM? Thanks. And any recommendations on kernels? I believe I was using dagkernel 0.2 last.
Click to expand...
Click to collapse
PA will make you cry tears of joy.
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app
So I downloaded ParanoidAndroid 2.21 and Gapps. I did 3 data wipes as well as cache and dalvik. When I installed the ROM and Gapps and rebooted it went back to my old ROM. I never saw Paranoid. I think maybe because I have an old recovery if that has something to do with it. I am on Android 2.3.6 running ClockworkMod 5.5.0.4. If I need to update, how do I do this? I have downloaded recovery-clockwork-5.8.4.8-quincyatt but it's an .img file and I am reading I need to get into fastboot to install and have no idea what to do. And if possible, I strongly prefer the non touch ClockworkMod, I don't like the idea of accidentally touching the screen and messing up, buttons are much safer and convenient for me.
I updates my cwm through the from manager app on the play store
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I have downloaded that, but when I go to do it, it doesn't show the Note as an option??? Also, I have SGH-I717. I just want a Jelly Bean ROM that the S Pen works with that I can overclock.
Are you getting an error when flashing the PA ROM? Otherwise, I can imagine why it isn't flashing.
Are you following these steps:
1. Wipe dalvik, cache, system, and factory reset
2. Flash PA rom
3. wipe cache and dalvik (probably not necessary but I do it anyway)
4. Flash GAPPS
5. Reboot
Even though you seem adverse to using a touch recovery, I would highly recommend you use TWRP instead of CWM as your custom recovery. I have had fewer issues and errors using TWRP. It is a better custom recovery IMHO.
I hope this helps! After using PA you'll never feel the need to change your ROM again !
I redownloaded it thinking it may be a bad download. This is what I get after deleting dalvik, cache, factory reset/data and trying to install...
assert failed: getprop("ro.product.device") == "SGH-I717" || getprop ("ro.build.product") == "SGH-I717" || getprop("ro.product.device") == "quincyatt" || getprop("ro.build.product") == "quincyatt"
E:Error in /emmc/pa_quincyatt-2.21-13OCT2012-215758.zip
(Status 7 )
Looks like an issue with CWM. I still recommend switching to TWRP even though you've stated that you'd prefer a non-touch recovery.
Are you sure you've got the i717? You're in Canada, by the look of your icon...won't work on the N-7000...ijs...
Sent from my SAMSUNG-SGH-I717 using xda premium
LOL, Canada. I love basketball, that is all. Sorry guys, I got it working. I installed TWRP and it installed just fine. Thanks.
Related
PHP:
Hello newbie here. I am trying to flash ROM option on the latest CM10 release. CM10 rom install successfully but ROM option fails to install on aroma installer (status 0).
wanted to paste error log but the forum prevent it so please refer attachment
Tried to wiped partiions (data, cache, dalvik), checked MD5, but no luck. If someone can advice, I'd be very appreciated. Thanks for reading
beerippon said:
PHP:
Hello newbie here. I am trying to flash ROM option on the latest CM10 release. CM10 rom install successfully but ROM option fails to install on aroma installer (status 0).
wanted to paste error log but the forum prevent it so please refer attachment
Tried to wiped partiions (data, cache, dalvik), checked MD5, but no luck. If someone can advice, I'd be very appreciated. Thanks for reading
Click to expand...
Click to collapse
Make sure to use the correct recovery. Do not use ROM manager whatsoever. What are you using?
Sent from my SCH-R950 using XDA
na7q said:
Make sure to use the correct recovery. Do not use ROM manager whatsoever. What are you using?
Sent from my SCH-R950 using XDA
Click to expand...
Click to collapse
Hi, thanks or replying.
I'm using cwm 5.5.0.4. I installed all the previous roms byt this without any problem but when I came to this romoption, it did not install the gsm/ storage option correctly.
Just tried out the latest cm10 11.2 rom, this rom includes all options and is in one go. Install went ok and now having correct gsm setting. Maybe there were some steps missing when I install 10.30 rom?
Try doing all the steps over again and make sure your not missing anything. Also make sure you have the correct rom for the phone you're trying to use. (ie. Don't use a rom made for a nexus s if you have an evo)
Sent from my MB855 using xda app-developers app
beerippon said:
Hi, thanks or replying.
I'm using cwm 5.5.0.4. I installed all the previous roms byt this without any problem but when I came to this romoption, it did not install the gsm/ storage option correctly.
Just tried out the latest cm10 11.2 rom, this rom includes all options and is in one go. Install went ok and now having correct gsm setting. Maybe there were some steps missing when I install 10.30 rom?
Click to expand...
Click to collapse
tried updating cwm by th3bill uploaded as well, but still no luck. some of the roms works though...
Not sure what factors are contributing installing tweaks.
tiltospe said:
Try doing all the steps over again and make sure your not missing anything. Also make sure you have the correct rom for the phone you're trying to use. (ie. Don't use a rom made for a nexus s if you have an evo)
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
I wiped cache, data, system, dalvik, then put factory wipe (I think factory wipe is not required but just incase), Then rom flash. (for aroma installer, I choose full wipe in here too, so effectively wiping at least twice)
I use photon ROMs for my Photon, though my photon is from KDDI while nearly all of forum member use either from sprint or USSC. This might be the reason I am stuck.
The problem persist in CM10 11/04.
I am currently on CM9, I have had this ROM for over a year....I tried flashing PA and I get an error message that says
asset failed: getprop("ro.product.device") == "d2vsw".....
E:Error in /sdcard/pa_d2vzw-3.10-L13N-25FEB2013-152747.zip (Status 7) Installation aborted.
I have tried flashing multiple times
Is vzwd2 for the Verizon Fascinate or is it the fascinate mtd?
CC268 said:
I am currently on CM9, I have had this ROM for over a year....I tried flashing PA and I get an error message that says
asset failed: getprop("ro.product.device") == "d2vsw".....
E:Error in /sdcard/pa_d2vzw-3.10-L13N-25FEB2013-152747.zip (Status 7) Installation aborted.
I have tried flashing multiple times
Is vzwd2 for the Verizon Fascinate or is it the fascinate mtd?
Click to expand...
Click to collapse
YOU ARE ON A FASCINATE SO FLASH THE FASCINATEMTD THE D2 STABDS FOR A MOTO DROID2 JEEZ Lol sorry I went off but damn reqd the file name which one would it be the one that says fascinate or the one that says d2 lol please think a little next time
Sent from my SCH-I500 using Tapatalk 2
the link you are looking for is this
pa_fascinatemtd-3.10-L13N-25FEB2013-154112.zip
http://d-h.st/T0j
and bbrad the d2vzw is actually the Samsung Galaxy S III....
.
hhp_211 said:
the link you are looking for is this
pa_fascinatemtd-3.10-L13N-25FEB2013-154112.zip
http://d-h.st/T0j
and bbrad the d2vzw is actually the Samsung Galaxy S III....
.
Click to expand...
Click to collapse
I'm going pure stupid today I mentioned in another thread that the i9000 isn't even a galaxy phone and now this I think I've been staying up to late trying to build fken aokp lol please forgive me lol
Sent from my SCH-I500 using Tapatalk 2
---------- Post added at 05:36 PM ---------- Previous post was at 05:28 PM ----------
Of course droid 2 would make more sense lol
Sent from my SCH-I500 using Tapatalk 2
I figured it out...
CC268 said:
I am currently on CM9, I have had this ROM for over a year....I tried flashing PA and I get an error message that says
asset failed: getprop("ro.product.device") == "d2vsw".....
E:Error in /sdcard/pa_d2vzw-3.10-L13N-25FEB2013-152747.zip (Status 7) Installation aborted.
I have tried flashing multiple times
Is vzwd2 for the Verizon Fascinate or is it the fascinate mtd?
Click to expand...
Click to collapse
Correct, Your phone is different and not a fascinate. Not really sure what is workin for your guys as far as flashing. Every phone has its own personality. B brads acts like my one ex few a year or two ago! hahahaha But ya mine does that every time when coming back from stock or cm9 ( status 7 errors) after ics usually wiping data and cache flash 4.2 you might get status 7 3 or 4 times it should boot into the next recovery then flash 4.2 again. What I do now is (if coming from stock) I go right to 4.2. This last time i flashed the cwm recovery then flashed the 4.2. Usually it will boot into the cwm5 add your golden. Because of the change in partitioning if not going back to stock just wiping and flashing those few times should get you there. I had no issues with that though when I flashed right from stock and skipped ics. I explained i what I did HERE in post #7. Everyone does/finds what works after a bit of crack flashing lol If you still having issues one more thing you can try before having or decide to go to stock and back up is try flashing a 4.1.2 rom then 4.2.2. I seriously had to keep trying to flash the zip several times and getting status 7's every time before it took. What a pain!
Edit: Man b rrraaad....you need some sleep or somethin lol
LasVegasRomeo said:
Correct, Your phone is different and not a fascinate. Not really sure what is workin for your guys as far as flashing. Every phone has its own personality. B brads acts like my one ex few a year or two ago! hahahaha But ya mine does that every time when coming back from stock or cm9 ( status 7 errors) after ics usually wiping data and cache flash 4.2 you might get status 7 3 or 4 times it should boot into the next recovery then flash 4.2 again. What I do now is (if coming from stock) I go right to 4.2. This last time i flashed the cwm recovery then flashed the 4.2. Usually it will boot into the cwm5 add your golden. Because of the change in partitioning if not going back to stock just wiping and flashing those few times should get you there. I had no issues with that though when I flashed right from stock and skipped ics. I explained i what I did HERE in post #7. Everyone does/finds what works after a bit of crack flashing lol If you still having issues one more thing you can try before having or decide to go to stock and back up is try flashing a 4.1.2 rom then 4.2.2. I seriously had to keep trying to flash the zip several times and getting status 7's every time before it took. What a pain!
Edit: Man b rrraaad....you need some sleep or somethin lol
Click to expand...
Click to collapse
I got some sleep I'm happy now lol
Sent from my SCH-I500 using Tapatalk 2
Here's a thought. Why not put the files in different folders so people stop asking and getting confused?
Shakes The AssClown said:
Here's a thought. Why not put the files in different folders so people stop asking and getting confused?
Click to expand...
Click to collapse
Who's that intended for?
Got PIE?....Sent from my: €vil Hybrid~>
I flashed CM10. That went smooth, but started giving me issues a few hours in, so I decided to flash back to ICS. I've done this without a hitch 2 times prior.
Now I get, "Error while restoring /system!" when trying to restore a CM9 backup (one that I've used once already, so I know it was a good backup).
I tried a full system restore to factory GB through ODIN, then reflashed CWM recovery in ODIN, then tried to restore the backup. Nothing but that message...repeatedly.
I then tried flashing a stock, rooted, ICS zip, that worked (flashed) okay (while a few other ROM's did not). Then attempted the restore again...nothing new. Same thing.
I tried flashing the CM9 zip I originally used (it was a nightly that worked well for me). CWM would not execute it.
I saw somewhere someone said to modify the "updater-script" by removing the lines:
"assert(getprop("ro.product.device") == "SGH-I717" || getprop("ro.build.product") == "SGH-I717" ||
getprop("ro.product.device") == "quincyatt" || getprop("ro.build.product") == "quincyatt");".
That actually worked and I was able to flash that with no issues.
I tried the restore...again...to no avail.
I guess if I have to "start from scratch" with everything, so be it, but I would REALLY rather not have to if possible.
I have read through a lot here in the forums, as well as done internet searching. I've seen info that is close to what I'm experiencing, but nothing exactly like it.
I'm at a loss right now.
I'd appreciate any new help that anyone can offer.
Thanks everyone.
Did you by chance rename your backup? If so, is there a space in the name? Do you have the latest version of CWM?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Bubba got it .....thanks brother ...g
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app
Bubbajoe...thank you.
This morning, while starting to go through system settings and trying to get things close to back to where they were before, I went into ROM Manager (installed by default in CM9) seeing you mention version of the app (and for the record for anyone having the same issue, I left the naming of the backup alone. It was the default that the app gives the file).
While I had tried a couple different CWM versions, the last I was on was v5.8.4.3. There was v5.8.4.8 available. So in a last ditch effort, and keeping in mind that sometimes the solution could either be simplest or the most obviously overlooked one, I updated to that newest version (happens to be the non-touch one), and thought "what the hell...it can't get any worse" and tried the restore one last time. I'm pretty sure I had 5.8.4.8 running when I made the backup, but wasn't thinking that could be the issue.
And it worked! Go figure. That one small version difference did the trick.
Thanks again man!
:thumbup:
Bubbajoe40356 said:
Did you by chance rename your backup? If so, is there a space in the name? Do you have the latest version of CWM?
Click to expand...
Click to collapse
Sent from my Mental 'Note'.
Oh snap. I was helpful. Better write that down. glad it helped man. Have a good one.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Yeah man. Me too.
Sometimes its the smallest things that make a big difference.
Bubbajoe40356 said:
Oh snap. I was helpful. Better write that down. glad it helped man. Have a good one.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Sent from my Mental 'Note'.
I just flashed CM10.1 on my Sprint S3.
I am trying to flash the latest nightly and I am getting the following error in both CWM and TWRP
Assert failed: getprop("ro.bootloader") == "l710vpbLj7" ... and it repeats that line specific to other versions (L710VPBMA6 etc)
I had an older version of CWM ... but still a 6+ when I flashed it. I since installed (via goomanager) TWRP as it looked cool. I started getting this error. Next, I used CWM to install the latest 6.0.3.1 version of CWM. It's still not wokring.
I seem to be able to download the goomanager latest DL and that's what I used to get the initial flashable zip.
Any ideas? I'm kinda at a loss. I'd do a full wipe but I'm afraid that if I do that I'll be SOL - as I have a current functional ROM right now.
Thoughts???
You're in the international i9300 forum. Check you installed sprint versions not i9300 versions then post in the correct forum
Sent from my GT-I9300 using Tapatalk 2
Oh. Mistake. Did not notice. Thanks for the info. Regards
G
Sent from my SPH-L710 using xda app-developers app
Here are all of the radio images that are currently available for the Note 2. These are packaged for flashing in recovery (CWM/TWRP). I'm posting these here because apparently the other images are all offline or unavailable anymore. I make no promises about these working, improving signal, or doing much of anything, but they're here anyway. If you need to know how to use these, flash your phone to stock and leave it locked, I'm not here to support stupidity. Enjoy.
VRALJB Modem
VRALL4 Modem
VRAMC3 Modem
VRUEMJ9 Modem
Than you!!!!
Sent from my SCH-I605 using Tapatalk
Thanks for putting some updated links Imnuts. I try to keep them perma-saved so I don't have to worry about that problem when I need a modem lol.
Do you know if we're safe mix-matching modems and ROMs? Like could I run VRALL4 with the new 4.3 leak? I'm not liking this MJ9 on my phone atm.
Is the latest radio from today or is it from the leak?
Does this avoid us having to use ODIN to install the modem?
Anyone try the latest yet with official ota?
Sent from my SCH-I605 using xda app-developers app
Skilover said:
Does this avoid us having to use ODIN to install the modem?
Click to expand...
Click to collapse
Is this a trick question? Did you not read the op??? It says pretty clearly that it can be flashed through twrp/cwm....my goodness
Sent from my SCH-I605 using xda app-developers app
npainter7 said:
Is this a trick question? Did you not read the op??? It says pretty clearly that it can be flashed through twrp/cwm....my goodness
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I got that part. I am so sorry, I didn't ask this correctly. What I'm trying to ask is, does this achieve everything that the ODIN package floating around does, which includes the modem and perhaps other things. I know it takes the phone back to stock as well. I have no idea why that would be necessary to install a radio. I've flashed radios before.
My goal is to be able to install one of the 4.3 TW roms that requires the MJ9 radio for wifi to work. If this achieves that goal, then flashing this file is clearly the way to go!!!
Thanks for this @imnuts !
Sent from my SCH-I605 using Tapatalk
Tried flashing j9 radio and don't seem to work on cm11 nightly
Skilover said:
I got that part. I am so sorry, I didn't ask this correctly. What I'm trying to ask is, does this achieve everything that the ODIN package floating around does, which includes the modem and perhaps other things. I know it takes the phone back to stock as well. I have no idea why that would be necessary to install a radio. I've flashed radios before.
My goal is to be able to install one of the 4.3 TW roms that requires the MJ9 radio for wifi to work. If this achieves that goal, then flashing this file is clearly the way to go!!!
Click to expand...
Click to collapse
I second this question. I am not going to bust out Odin. But if this is the same I will flash this and a new room at my leisure. I have been reading threads for thirty minutes and now I know I am not the only one that is wondering this.
Sent from my SCH-I605
JustusIV said:
I second this question. I am not going to bust out Odin. But if this is the same I will flash this and a new room at my leisure. I have been reading threads for thirty minutes and now I know I am not the only one that is wondering this.
Sent from my SCH-I605
Click to expand...
Click to collapse
Ive been on the leak for 5 days. I flashed modem in recovery with this same type of file from another thread. I had no issues. Just flashed official, this modem in recovery, and then latest devil kernel. I can confirm this works just fine instead of odin. Im wondering if the odin flashing might be causing issues for some. In 5 days i had no fcs and no reboots with leak.
Sent from my SCH-I605 using xda app-developers app
donnyp1 said:
Ive been on the leak for 5 days. I flashed modem in recovery with this same type of file from another thread. I had no issues. Just flashed official, this modem in recovery, and then latest devil kernel. I can confirm this works just fine instead of odin. Im wondering if the odin flashing might be causing issues for some. In 5 days i had no fcs and no reboots with leak.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I flashed the official, this modem and left the default kernel. For some reason, it would flash the sammy boot screen twice, then take me right back to recovery. Do you have to use an alternate kernel?
MADDAN18 said:
I flashed the official, this modem and left the default kernel. For some reason, it would flash the sammy boot screen twice, then take me right back to recovery. Do you have to use an alternate kernel?
Click to expand...
Click to collapse
I dont know if you do or not. It runs perfect on devil with great battery just on stock settings.
Sent from my SCH-I605 using xda app-developers app
I flashed the zip, it said successful, installed new rom-and it says modem still is VRALL4.
This doesn't seem right.
Please excuse me if I'm being stupid-tough crowd here!
When I try to flash VRUEMJ9 Modem with twrp 2.3.2.3 it fails on an assert:
asser filed: getprop("ro.product.device") == "t0ltecdm
getprop("ro.product.device") == i605" ||
getprop("ro.product.device") == SCH-II605
Error in /external_sdcard/.../VRUEMJ9_.. (status 7)
(yes I verified the md5sum as 881d4b58aaf...a31b38 using MD5Checker)
I used this same setup to flash the previous radio.
(part of the message is truncated because of bad linewraps)
Skilover said:
I got that part. I am so sorry, I didn't ask this correctly. What I'm trying to ask is, does this achieve everything that the ODIN package floating around does, which includes the modem and perhaps other things. I know it takes the phone back to stock as well. I have no idea why that would be necessary to install a radio. I've flashed radios before.
My goal is to be able to install one of the 4.3 TW roms that requires the MJ9 radio for wifi to work. If this achieves that goal, then flashing this file is clearly the way to go!!!
Click to expand...
Click to collapse
I think that Odin isnt just for the radio but other parameters also. Im not sure but from what ive read thats what it sounds like. There was another zip that was supposed to work but it never did for me anyway so i had to use odin. It will be worth it to have it done right 4.3 is great i run jellywiz
Sent from my SCH-I605 using Tapatalk
jake21 said:
When I try to flash VRUEMJ9 Modem with twrp 2.3.2.3 it fails on an assert:
asser filed: getprop("ro.product.device") == "t0ltecdm
getprop("ro.product.device") == i605" ||
getprop("ro.product.device") == SCH-II605
Error in /external_sdcard/.../VRUEMJ9_.. (status 7)
(yes I verified the md5sum as 881d4b58aaf...a31b38 using MD5Checker)
I used this same setup to flash the previous radio.
(part of the message is truncated because of bad linewraps)
Click to expand...
Click to collapse
You're on a pretty old version of twrp
http://goo.im/devs/OpenRecovery/t0ltevzw//openrecovery-twrp-2.6.3.1-t0ltevzw.zip
Here's the latest....flash in recovery.
Sent from my SCH-I605 using XDA Premium HD app
Yea I know and you can also reference it via google play. My problem is I am a bit of a newbie and it was not obvious to me how to install. You might ask how I got the current version - well that was a side effect of the folks making it really easy to crack the note 2 back in Dec (2012). You just ran this script and it cracked the boot loader and installed twrp (I believe it used odin) so I never really did learn how to update twrp.
This afternoon I tried the version of google play but it wanted to isntall an 'open bootloader" and I wasn't sure why it wanted to do that since my bootloader was already cracked and all I wanted it to do is to update twrp.
=
So I guess this begs the question do I download this zip file and then use twrp 2.6.3.1 to install it like a rom ?
MADDAN18 said:
You're on a pretty old version of twrp
http://goo.im/devs/OpenRecovery/t0ltevzw//openrecovery-twrp-2.6.3.1-t0ltevzw.zip
Here's the latest....flash in recovery.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
jake21 said:
Yea I know and you can also reference it via google play. My problem is I am a bit of a newbie and it was not obvious to me how to install. You might ask how I got the current version - well that was a side effect of the folks making it really easy to crack the note 2 back in Dec (2012). You just ran this script and it cracked the boot loader and installed twrp (I believe it used odin) so I never really did learn how to update twrp.
This afternoon I tried the version of google play but it wanted to isntall an 'open bootloader" and I wasn't sure why it wanted to do that since my bootloader was already cracked and all I wanted it to do is to update twrp.
=
So I guess this begs the question do I download this zip file and then use twrp 2.6.3.1 to install it like a rom ?
Click to expand...
Click to collapse
That is correct. Simply download the zip, copy it to your sd card, boot into recovery, choose the zip and flash (just like you would a ROM. When you reboot, twrp will be updated. You can also download goo manager from the market. And choose "install custom recovery" I just find flashing the zip eliminates several steps ie software down loads etc.
Sent from my SCH-I605 using XDA Premium HD app