[Q] strange home screen behaviour in JB..... - Asus Eee Pad Transformer Prime

Anyone else notice that sometimes you can touch left or right side of the screen to move to then next screen, as it should be, yet sometimes i cant and have to swipe to get to the next screen? very odd

I have the same problem
Wysyłane z mojego Transformer Prime TF201 za pomocą Tapatalk 2

Related

[Q] Lightbleed Problem

Hi everyone,
Finally got my brand new phone from Walmart Wireless in the mail yesterday. Got a heck of a deal during Thanksgiving. The only problem is that this phone has some light bleed at the bottom right hand corner along with 2 small specks which I thoght was dirt but is probably dead pixels. The dead pixels can only been seen on a black screen for some reason and doesn't show up when the screen is red, blue or green. The phone isn't even activiated it and I'm debating whether I should return this or just live with it. What do you all think? To be honest, the screen is so bright on this phone, the only time I can tell that there is a defect is when it's on 100% brightness against a black screen. I'm just worried that my replacement could be worse? What is everyone else seeing?
https://www.dropbox.com/s/zaor6l6mtlj9l7w/2012-12-05%2021.13.03.jpg
https://www.dropbox.com/s/1ogmbo2gh0elfhx/2012-12-05%2021.10.25.jpg
Have You seen my threads?
http://forum.xda-developers.com/showthread.php?t=2030602
http://forum.xda-developers.com/showthread.php?t=2026307
U can also check about this issue:
http://forum.xda-developers.com/showthread.php?t=2018580
Wysyłane z mojego HTC One X+ za pomocą Tapatalk 2
Yes, it seems that there is screen bleed along the bottom edge of the screen. Which I can deal with, but alongside the right hand side, I find it a little annoying when watching movies in the dark. Anyways, they're sending out another one to me and I guess I'll keep the better of the two...

pen/pencil input on gpe?

As the title says one of the biggest drawing points for me was the ability to draw on the screen(no pun intended). I was wondering if it's a xperia thing or what because my gpe doesn't recognize anything other than a traditional Stylus or finger? Also can anyone point me in the direction of xperia apps that I can install for my non root gpe?
Pens nolonger work now I have second screen protector on, but pencils still do
Sent from my Xperia Z Ultra using Tapatalk
blueether said:
Pens nolonger work now I have second screen protector on, but pencils still do
Sent from my Xperia Z Ultra using Tapatalk
Click to expand...
Click to collapse
thanks i was able to see the pencil works fine but is there anyway to get most of the xperia apps on the GPe with no root?

Case cracking

Does anyone experience something like (I don't really know how to name it) case squeeking or cracking while pushing it a little harder? Only in one place, near the speaker, left down corner.
Same for me, been so from the first day.
Skickat från min PLK-L01 via Tapatalk
Did you do something about it? I mean is it something that can harm the phone in some time?
I've just checked and noticed something like that. When I press harder my phone body in left corner near to speaker it sounds "crack crack". I'm going to send an email to the service
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
On my 64gb version as well. Id say it exists on all Honor 7 phones. Im not too bothered though.
No issue on mine... How hard are you pushing?
Well, i grabb bottom of the phone between thumb and pointing finger and just press. Not hard. And then it cracks
Wysłane z mojego PLK-L01 przy użyciu Tapatalka

Screen distortion when pressed - Normal?

Just got a nexus 9 tablet. I noticed on first boot, when I pressed on the screen, the LCD would distort a bit. Doesn't seem very noticeable on light backgrounds, but on a dark background (like when the tablet is booting) it is super obvious. Do other people have this as well? I have attached a video of the problem.
Nexus 9 Screen Problem Dropbox
I didnt see it on mine but i know that with iPad Air 2 its common problem because tablet is so thin and if you press finger stronger on back cover screen will have disortions
Wysłane z mojego GT-I9295 przy użyciu Tapatalka

Outline of the fingerprint scamner on the AOD

It would be nice if there would be an option to set the outline of the fingerprint permanently on the AOD to know where to put the finger even with the screen off because it's a weak solution to first wake up the display and then put your finger on it. Any one has a solution ? Sorry for my bad English I'm from Poland
Wysłane z mojego SM-G973F przy użyciu Tapatalka
There's an option close to what you're asking for, but it's not quite permanent. Go into settings and into fingerprints. There's an option called "Show icon when screen is off". This makes the finger guide appear on the AOD also but it won't stay permanently. But you should check it out nonetheless.
I have this but still u need to do 2 taps to perfectly fit the scanner there should be an option to turn this on permanently like f.e. clock
Wysłane z mojego SM-G973F przy użyciu Tapatalka
it will probably come with AOD update.
This would most certaintly create screen-in, right??
JoeFCaputo113 said:
This would most certaintly create screen-in, right??
Click to expand...
Click to collapse
Yup! It would definitely cause screen burn-in. The AOD clock actually can move around a bit (even if it's very subtle), but you wouldn't want the icon of the fingerprint sensor to do that as it would defeat the purpose of lining up with the sensor
The guiding circle could move a few pixels to the sides and we wouldn't notice, we are not that exact when placing the finger, I believe something like the previous S lines had for the force touch button on the AOD would be great.
What about a lock screen wallpaper?
Devhux said:
Yup! It would definitely cause screen burn-in. The AOD clock actually can move around a bit (even if it's very subtle), but you wouldn't want the icon of the fingerprint sensor to do that as it would defeat the purpose of lining up with the sensor
Click to expand...
Click to collapse
This is exactly what I was thinking as well. Tbh, once you get used to the placement after a few weeks we won't even need any indication of where the fingerprint sensor is.
Yeah. I think we all have to be patient with this phone. Like the iPhone X, it marks a fairly significant change overall for a Samsung device, and it'll take some getting used to. Remember all the reports of how bad Face ID was working on launch?
Nafrota said:
The guiding circle could move a few pixels to the sides and we wouldn't notice, we are not that exact when placing the finger, I believe something like the previous S lines had for the force touch button on the AOD would be great.
Click to expand...
Click to collapse
The circle doesn't have to move at all. It could just grow bigger or smaller as long as the center of the circle is the center of the FPS.
JoeFCaputo113 said:
This would most certaintly create screen-in, right??
Click to expand...
Click to collapse
i could just be like a small dot or circle that stays where the center of the sensor is. then it can move around slightly like the clock and date do to prevent burn in but still be always somewhat in the center of the fp sensor.

Categories

Resources