I need some help,i had a tg 01, i installed wp 7 tango from miro ,everything was just fine and i gave it to someone,now i received again the phone to install nokser new rom .The problem is that i can,t put it on,when i press power button ,nothing,the red light just blinkin,i tried with power + camera,nothing,after one minute led is green and on display shows
,,platform:tsnagi
bdlr ver 7.27.1 apr 29 2010
modem dfp-sdcaowzn-221001-1
bootme tsb4cobeoe64e4b
TOSHIBA,,
for 20 seconds and after it.s off again
My friend have no idea to root or anything like that,the only thing i imagine was that he pressed reset button,so please,i need some help to unbrick it
4onu said:
I need some help,i had a tg 01, i installed wp 7 tango from miro ,everything was just fine and i gave it to someone,now i received again the phone to install nokser new rom .The problem is that i can,t put it on,when i press power button ,nothing,the red light just blinkin,i tried with power + camera,nothing,after one minute led is green and on display shows
,,platform:tsnagi
bdlr ver 7.27.1 apr 29 2010
modem dfp-sdcaowzn-221001-1
bootme tsb4cobeoe64e4b
TOSHIBA,,
for 20 seconds and after it.s off again
My friend have no idea to root or anything like that,the only thing i imagine was that he pressed reset button,so please,i need some help to unbrick it
Click to expand...
Click to collapse
Hello,
With the information you give us, i think that the problem come from the battery wich is to low to switch on properly the phone. Try to use an external battery charger to fill it up then try again. It should work!!
If you need some more help, don't hesitate!!
thanks for quick reply,i thought also the same,when i connect through usb into pc,it shows that a new device into and the tg led appear red,so i suppose that it is charging...correct me if i am wrong
4onu said:
thanks for quick reply,i thought also the same,when i connect through usb into pc,it shows that a new device into and the tg led appear red,so i suppose that it is charging...correct me if i am wrong
Click to expand...
Click to collapse
You update too partition.mbn and *.hex file?
and what version, and from you download firmware?
Please post all questions in the general section. Thanks! Thread moved.
Sent from my Galaxy Nexus using Tapatalk 2
4onu said:
I need some help,i had a tg 01, i installed wp 7 tango from miro ,everything was just fine and i gave it to someone,now i received again the phone to install nokser new rom .The problem is that i can,t put it on,when i press power button ,nothing,the red light just blinkin,i tried with power + camera,nothing,after one minute led is green and on display shows
,,platform:tsnagi
bdlr ver 7.27.1 apr 29 2010
modem dfp-sdcaowzn-221001-1
bootme tsb4cobeoe64e4b
TOSHIBA,,
for 20 seconds and after it.s off again
My friend have no idea to root or anything like that,the only thing i imagine was that he pressed reset button,so please,i need some help to unbrick it
Click to expand...
Click to collapse
I had exactly the same thing, Charge battery on another phone. It solved my problem.
P.S. The trick is the phone can't charge the battery, it's restarting over and over.
I have had the same problem, just swap batteres or charge it somewhere else - not in the phone
Related
O2 XDA model PM 300 dead during upgrade
I need help, my XDA is not running at all no sing of life , I try with holding camera and reset button nothing no sine ,
If anyone know how to start on or get into the tri-color screen , pls help
Regards
can u turn it on or is it completely dead??
if not, try another battery
I need help from all of you
I can’t start xda that is a problem, is dead , battery it was around 75 % , I need help if know of to start aging after my mistake during upgrade I install old upgrade and it stop on 3 colors screen in I move a usb cable after that I can not start any more if you have any info which it can help I will appreciatively
Regards to all
remove the batterry for a days time and check the next day have tried the same and with success
ipl 2.10
spl 3.08
radio 2.19
os 2.20 jesterz
You should find an extra usb cable and expose the black and red wires. Plug the oposite end into the usb port on your computer, then hold the red wire on the positive end of the battery and put the black wire on the negative end of the battery. Do this for about 30 seconds then put your battery back into your phone. This will restart your battery.
real help
I don’t have problem with battery , battery is working OK , I test in other xda , I have problem with XDA , is dead during upgrade , I put wrong upgrade and it stop on 3 colours and I move I usb cable and after I can not start power on or rest . If anyone know how please reply
Regards to all
haveriii said:
O2 XDA model PM 300 dead during upgrade
I need help, my XDA is not running at all no sing of life , I try with holding camera and reset button nothing no sine ,
If anyone know how to start on or get into the tri-color screen , pls help
Regards
Click to expand...
Click to collapse
Hi
Have u tried to force bootloader mode (the tri coloured screen),it is done, by pressing down the camera and while keeping it pressed,than press the power on button with other hand. It will switch on the device in bootloader mode( into the tri color screen) from there than flash the original Rom of ur carrier,which came pre-installed on the device or any other Official Rom from the same carrier.U can download official rom from ur carriers site.
Hope this will help and revive ur device.
secondly follow this excellent thread and read and ask for help there. Goodluck
http://forum.xda-developers.com/showthread.php?t=294107
help plz urgent
hi! friends need an urgent help plz while i was updating the rom my o2 got stuck with some blank screen written with "SERIAL" on the top and "VS1.02" at the bottom plz help how to get back my phone software
Can you enter bootloader? Hold the COMM manager button and soft reset.
@fardeen20
Please do not cross post the same thing in several threads. You have been answered alread. I have deleted the repeated posts for you. strike 1
Wow! There is a moderator for this forum!
Have you tried entering bootloader when the device is plugged into the charger? I know you say the battery works, but that doesn't mean the device can use the battery. Does the device do anything when plugged in or powered on?
dead prophet
im havin the same issue... my prophet wont even wake up... no power.. batt was more than 80% before flashed.. what can i do to get the power back..?? pls reply
Bootloader
Can someone post a picture of how the bootloader screen should look like?
I know it is a stupid question, but maybe that will help me solve my problem as well.
http://wiki.xda-developers.com/index.php?pagename=prophet_bootloader
may help.
i need the tool for upgrading htc pm300
Hi,
I was flashing my i780 with i780_DXHC4_Rev12 and it got stuck at the phone part (after created COM successful), I took the battery out... and try to flash the Phone part again... the phone doesn't turn on at all, (fn+enter+power)... and even I try Power button only... still doesn't work... any help?
kyborg said:
Hi,
I was flashing my i780 with i780_DXHC4_Rev12 and it got stuck at the phone part (after created COM successful), I took the battery out... and try to flash the Phone part again... the phone doesn't turn on at all, (fn+enter+power)... and even I try Power button only... still doesn't work... any help?
Click to expand...
Click to collapse
Try taking the battery off for 24 hours.
then try to light it up...
Nadavi.
1:00AM will wait for 24 hours
kyborg said:
Hi,
I was flashing my i780 with i780_DXHC4_Rev12 and it got stuck at the phone part (after created COM successful), I took the battery out... and try to flash the Phone part again... the phone doesn't turn on at all, (fn+enter+power)... and even I try Power button only... still doesn't work... any help?
Click to expand...
Click to collapse
Mine got stuck at the phone part because I didn't have the 64bit modem drivers for XP at hand .. (only 32bit..) .. yet the phone did turn on, only the phone part wasn't updated. No idea what happened in your case
inertiax3 said:
Mine got stuck at the phone part because I didn't have the 64bit modem drivers for XP at hand .. (only 32bit..) .. yet the phone did turn on, only the phone part wasn't updated. No idea what happened in your case
Click to expand...
Click to collapse
Could you please upload or link me to all the correct modem drivers needed to flash the phone part?
Thanks,
Eran.
search the forum, it 's there
any other tips?
waited for 24 hours :| sill doesn' work
i have same trouble...when i upgrade the phone dead because batrey low..now the phone dead. please same body help....
i got same problem too.
my phone dead because i was upgrade rom with low battery.
please help us. thankyou
amisui said:
i got same problem too.
my phone dead because i was upgrade rom with low battery.
please help us. thankyou
Click to expand...
Click to collapse
This happened to me several times...
Please do the following with a fully charged battery and not USB or charger connected :
toutch the battery contacts fast several times (it creates a small sparkle that you may not see) then press the start button. That should do the trick
come on , can same body help us. !!!!!!! any sofware can flash i780 with dead position? i think the phone dead because not boot+rom+phone instaled. mirage updater only can flash in on condition.
nCoder said:
This happened to me several times...
Please do the following with a fully charged battery and not USB or charger connected :
toutch the battery contacts fast several times (it creates a small sparkle that you may not see) then press the start button. That should do the trick
Click to expand...
Click to collapse
Thank nCoder for your trick, i'll try to night
http://www.youtube.com/watch?v=XJ6l_sSHfec
http://www.youtube.com/watch?v=Fz2II5euldc
I follow you trick lick battery then press start (only start button / shift+enter and start)
but it not happend when i press start button.
what i was wrong?
best regard,
To Upgrade samsung i780
Hi i want samsung i780 firmware OS and it's procedure.
Any one help me my htc p3400i is not booting...only green and red key used to blink for a while and also when i am pressing the camera button then also the phone is not coming in tri color. Earlier it was coming but now its not coming only the keys used to blink,,so what to do now???
thanks
Pawan, dear, you got your phone working again or not?
Press camera power and soft reset will bring your phone to tri color screen. If your phone is back on its feet, please inform.
my device same problem its not booting, only blink red and green light, not coming tri color pls help us
hello friend i have same problem and i try with camara+power+soft reset but not come in tri color display
now what to do please help me
Thank you
Prakash
any help on this?
satanicsouls said:
any help on this?
Click to expand...
Click to collapse
What you were trying to do?
Or it was a sudden??
Plz give more information........
I was trying to flash my rom. which i did successfully on the first time. second time tried to flash with some file names htc-Asia something, it installed but ended up bricking my phone.
satanicsouls said:
I was trying to flash my rom. which i did successfully on the first time. second time tried to flash with some file names htc-Asia something, it installed but ended up bricking my phone.
Click to expand...
Click to collapse
Seems that you have flashed a wrong rom.Now you should go for J-TAG restore.
Can you tell me the procedure for the same. i rem readin that i will have to solder some stuff.. please guide through..
satanicsouls said:
Can you tell me the procedure for the same. i rem readin that i will have to solder some stuff.. please guide through..
Click to expand...
Click to collapse
Just use a valid ROM according to your handset.There are two versions of every ROM you'll find here(Old Gene and New GENE).Just select them carefully
gene is dead
one day i woke up to find my gene not getting switched on.
i had used it the night before and then put it for charging..
now only red light blinks in the led when i try to charge it nothing else.
i got the battery charged from outside but that also didnt work..
please help
I am unalbe to connect the USB, since it is not switching on. i have tried all possible ways to bring it back. cannot even enter bootloader mode. Please advise.
Hi guys,
I´ve even tried to update my NIKI with a wm6.5 rom - but nothing happened - so i used the CID unlocker....everything worked finde - no error messages - then message: the device will be rebooting automatically...
uff...it rebootet, but the screen stays black...nothing is on
i already removed the akku package...the gsm card, the memory card...akku back inside - start button, but nothing happens....
anyone an idea what to do?
when i reconnect the device via usb to my pc, windows sounds a new usb device - but shown as not working...
ahhhhhh, my new device!!!!
can anybody help me please?!?!?
Sam40918 said:
Hi guys,
I0…7ve even tried to update my NIKI with a wm6.5 rom - but nothing happened - so i used the CID unlocker....everything worked finde - no error messages - then message: the device will be rebooting automatically...
uff...it rebootet, but the screen stays black...nothing is on
i already removed the akku package...the gsm card, the memory card...akku back inside - start button, but nothing happens....
anyone an idea what to do?
when i reconnect the device via usb to my pc, windows sounds a new usb device - but shown as not working...
ahhhhhh, my new device!!!!
can anybody help me please?!?!?
Click to expand...
Click to collapse
hi sam
let me assure u nothing wrong has happened to ur device.did u try a hardreset?if not then try it.if u know how to hardreset,u will do it as a flash but if u don't know how to do it let me help u
take out the battery reinsert it don't switch on the phone.charge it,when fully charged take out ur battery,reinsert ur battery.now press the "accept" and "reject" button at the same time and press the power button.now follow the instruction displayed on the screen.
done?
now c ur device going back to normalcy.
hope this helps u
regards
good morning )
I would really like to try a hard-reset...but the device is like death - the akkupackage is fully loaded...
when i connect the device with power, nothing happens - even the led isnt lighting!
just if i pick off the akku und connect the device without akku to the power, then a red led is there lighting constantly.
the device has no reaction to the power button...
yesterday i used the hardspl:
forum.xda-developers.com/showthread.php?t=649003
after the reboot message, my device was dead.
i found no way - and i have searched all night long - to wake it up (
Isnt there any "magic finger trick" with some buttons to awake it? :O)
i wrote to htc support...telling that the phone just when off....hope they will change it on warranty....its 2 weeks old (
Hi, ok so about a month ago i let the phone discharge completly i was on wolf's rom,and when i got home i put it on charge let it like 10 - 15 minutes and then try to turn it on,but all i got was a vibration and a green light flashing once,and then got a new phone arc s and today i kinda miss my x10 xD so i took the battery out and give it 2..3 minutes to rest and then try again ....nothing(i let it another 1:30 minutes to charge ), afterthat i flashed 2.1 official with flashtool clean no mod's the flashtool didnt give me any error but when i try to start ..the phone did the same thing 1 vibrate and green light once blink and now when i put it on charge the phone has the green light on like 5 minute then it turns off,if i take the battery out and put it on charge the green light apears...i tried another battery and the phone has the same problem.. so i came here if anyone know what is wrong with him (i installed SEUS > press repair > said my phone has the latest software,and pc companion the same) (sorry for my english)
Later edit : i am thinking to try unlock bootloader if that dosent give me any what so ever blinking screen or logo or error ... imma going to buy a JTAG cable and try that /// what should i do?? becouse i just want to experiment on this phone cuz i have my arc s and i am good with him xD
Later later edit : ok so i found out the problem..that was i tried to flash 1.6 in the past and that f**ked my boot some how so today i went at a service who has Jtag box ..(is kinda expensive to buy one just for my phone ..no worth it) for x10 an the man fix my phone in like 10 minutes so everyone who has one of the one of the following problmes only jtag can fix it : 1 if u flashed a stock rom and u got only a green light blink and a virbate and then nothing happens 2 if u get a green light and the phone is stuck on virbate and nothing happens..and btw if u get three blink red lights..u need to charge the phone or the battery hope it helps somebody
because i am happy now with the x10 working like new xD (dunno what is the rulles here but u can delete my topic.thx) hi hi only me post here
Since you solved your problem you should update your post from 'x10 doesn't power on' to something like 'SOLVED: X10 doesn't power on '
I also had same no power green light, had to use older flashtool and flash stock generic 2.1. It took 2-3 times for flash to take
from XDA app on my X10S v8.3 on DooMKernel6 @ 1152Mhz
ToledoJab said:
Since you solved your problem you should update your post from 'x10 doesn't power on' to something like 'SOLVED: X10 doesn't power on '
I also had same no power green light, had to use older flashtool and flash stock generic 2.1. It took 2-3 times for flash to take
from XDA app on my X10S v8.3 on DooMKernel6 @ 1152Mhz
Click to expand...
Click to collapse
am having the same problem can you plz plz plz help me thx
Maty360414 said:
am having the same problem can you plz plz plz help me thx
Click to expand...
Click to collapse
A little info is needed. Have you tried the way described in this thread? How did this happen?
Sent from my X10S using XDA