can i flash the fxp 144 on my xgo even if i'm on GB?
ambangis said:
can i flash the fxp 144 on my xgo even if i'm on GB?
Click to expand...
Click to collapse
yup, but you may encounter a lot of problem,
for best result, flash first the latest firmware
144 and 144a not working on xperia go causes bootloop+ removed cwm so you have to flash boot from pc to recover
f
What is a Good Working ROM for Xperia GO? latest is required....i am currently using JB Stock 4.1.2....tried CM10 Caused BootLoop...what is a good working CM Rom for XGO?
Related
I am currently on a custom ICS ROM.. And I want to try some GB ROMs too.. So what should I do?
Should I first flash the GB's stock ROM? If yes, then with which kernel?
Xperia Neo V..
Unlocked Bootloader..
Xperia Pureness (Build 3).. by Thilnac
iamdchosen1 said:
I am currently on a custom ICS ROM.. And I want to try some GB ROMs too.. So what should I do?
Should I first flash the GB's stock ROM? If yes, then with which kernel?
Xperia Neo V..
Unlocked Bootloader..
Xperia Pureness (Build 3).. by Thilnac
Click to expand...
Click to collapse
Flash generic global .42 (comes with correct kernal) root it then OTA update to 62 install cwm then go from their do wat you want
But since I have an unlocked bootloader, do you think I would be able to update OTA?
Won't it brick the phone?
Sent from my MT11i using xda premium
mine brick while update through OTA.i have to relock BL with s1tool...
So what should I do?
Should I flash the 0.62 ftf file using flashtool directly and then root it with the Doomlord's kit?
Or any other suggestions???
Raazax8 said:
Flash generic global .42 (comes with correct kernal) root it then OTA update to 62 install cwm then go from their do wat you want
Click to expand...
Click to collapse
He's on unlocked bootloader, why messing with ota's..
@OP: if you wanna jump straight to some custom rom: flash .62 .ftf, and flash any custom kernel advised by rom creator.
Its same as you did with ics, first stock .ftf then kernel, then rom.
Hey man. If you previously were using the latest ICS Sony ROM before hopping to a custom ROM, then simply flash the kernel of that Custom GB ROM, wipe everything and flash as usual. You are good to go. There is no need to downgrade so long as you're on latest.
Sources: Experience
Madfysh said:
He's on unlocked bootloader, why messing with ota's..
.
Click to expand...
Click to collapse
I only tell it the way i know. mine is locked bootloader so i follow pandemics guide and that is rooting 42 OTA to 62 then install cwm.
thats only way i know n i am only trying to help someone with the little knowledge i do have )
iamdchosen1 said:
I am currently on a custom ICS ROM.. And I want to try some GB ROMs too.. So what should I do?
Should I first flash the GB's stock ROM? If yes, then with which kernel?
Xperia Neo V..
Unlocked Bootloader..
Xperia Pureness (Build 3).. by Thilnac
Click to expand...
Click to collapse
just flash gb .62 firmware & GB Kernel through flashtool
Flashtool
http://forum.xda-developers.com/showthread.php?t=1351317
GB Firmware
http://forum.xda-developers.com/showthread.php?t=1258723
Custom Rom
http://forum.xda-developers.com/showthread.php?t=1316394
Helpful thread
http://forum.xda-developers.com/showthread.php?t=1757256
Hit thanks to respective thread creater they are our real helper
iamdchosen1 said:
I am currently on a custom ICS ROM.. And I want to try some GB ROMs too.. So what should I do?
Should I first flash the GB's stock ROM? If yes, then with which kernel?
Xperia Neo V..
Unlocked Bootloader..
Xperia Pureness (Build 3).. by Thilnac
Click to expand...
Click to collapse
GB rom are good so if you want them simply flash the rom with cwm and flash the kernel using flashtool
Guys,
Did anyone had luck flashing CM9 RC1 on Xperia Ray?
I'm struggling to get this working.
kgthenerd said:
Guys,
Did anyone had luck flashing CM9 RC1 on Xperia Ray?
I'm struggling to get this working.
Click to expand...
Click to collapse
i've tryied some time before, it works, but if i remember well i need to flash the fxp128 kernel.
paolinhos said:
i've tryied some time before, it works, but if i remember well i need to flash the fxp128 kernel.
Click to expand...
Click to collapse
That's lame.
I remember that I could use CM7 ROMs in my old Xperia X8 with stock kernel. It was a stupid move trying to unlock the bootloader to change kernel, I just bricked my phone.
I have tried, but it has some problems (automatic light sensor doesn't work for me) and wifi drops signal sometimes. Stay @ fxp 9.0 :cyclops:
El Brillantinas said:
That's lame.
I remember that I could use CM7 ROMs in my old Xperia X8 with stock kernel. It was a stupid move trying to unlock the bootloader to change kernel, I just bricked my phone.
Click to expand...
Click to collapse
You can use cm7 with stock kernel?
Really?
paolinhos said:
You can use cm7 with stock kernel?
Really?
Click to expand...
Click to collapse
I was running XRay Kernel on stock rom
it was good but i need CM9. But for some reason it is not working
paolinhos said:
You can use cm7 with stock kernel?
Really?
Click to expand...
Click to collapse
Yes, I did when I had my Xperia X8 alive. Check their section, they have a lot of ROMs based in CM7 Android 2.3.7 that work in stock kernel.The only neccesary things are root and CMW.
As I said, my big error was trying to unlock the bootloader just to use a ROM that needed a custom kernel, I don't know why I did it when other ROMs always worked fine, like GingerDX... I bricked my X8 forever, that's why I bought my Ray and I won't mess with the bootloader again.
I guess is due the different kernel architectures, or it's because SONY allowed to unlock bootloaders on the Xperia 2011 line, but it's very disappointing that most of the ROMs for Xperia Ray need unlocked bootloaders and customized kernels. That's why Hybrid 3.2, Superleggera and MIUI for locked bootloaders are a bless for us. @JJ Doctor, @arcatarc and @OatnezrA are true heroes :good:
El Brillantinas said:
Yes, I did when I had my Xperia X8 alive. Check their section, they have a lot of ROMs based in CM7 Android 2.3.7 that work in stock kernel.The only neccesary things are root and CMW.
As I said, my big error was trying to unlock the bootloader just to use a ROM that needed a custom kernel, I don't know why I did it when other ROMs always worked fine, like GingerDX... I bricked my X8 forever, that's why I bought my Ray and I won't mess with the bootloader again.
I guess is due the different kernel architectures, or it's because SONY allowed to unlock bootloaders on the Xperia 2011 line, but it's very disappointing that most of the ROMs for Xperia Ray need unlocked bootloaders and customized kernels. That's why Hybrid 3.2, Superleggera and MIUI for locked bootloaders are a bless for us. @JJ Doctor, @arcatarc and @OatnezrA are true heroes :good:
Click to expand...
Click to collapse
Dont know mate, I got ray and neo v on my table ready to get out of sony stock and for some reason i just cant install it on them.
May be i will never by an another sony phone again :angel:
In last 12hrs i tried almost everything, flashed FXP129 CM9 no luck, tried to flash official cm9 rc1 same thing no damn luck.
this ray is booloader unlocked via s1tool, rooted and has cwm recovery but i still cant flash any rom on it. It's frustrating :silly:
dont use FXP129 kernel its a bad kernel . and when you flash rom did you flash the kernel ? because CM9 RC1 kernel is also a bad kernel . the best working kernel is FXP 128 and the FXP128 rom .
-Jesco- said:
dont use FXP129 kernel its a bad kernel . and when you flash rom did you flash the kernel ? because CM9 RC1 kernel is also a bad kernel . the best working kernel is FXP 128 and the FXP128 rom .
Click to expand...
Click to collapse
as i say...
-Jesco- said:
dont use FXP129 kernel its a bad kernel . and when you flash rom did you flash the kernel ? because CM9 RC1 kernel is also a bad kernel . the best working kernel is FXP 128 and the FXP128 rom .
Click to expand...
Click to collapse
Thanks for the info mate, Now i'm on JJHybrid ROM with sirkay's XRay kernel. Working good lets see what happens :victory:
kgthenerd said:
Dont know mate, I got ray and neo v on my table ready to get out of sony stock and for some reason i just cant install it on them.
May be i will never by an another sony phone again :angel:
In last 12hrs i tried almost everything, flashed FXP129 CM9 no luck, tried to flash official cm9 rc1 same thing no damn luck.
this ray is booloader unlocked via s1tool, rooted and has cwm recovery but i still cant flash any rom on it. It's frustrating :silly:
Click to expand...
Click to collapse
What if you try to re-lock your bootloader?
Hi people
I have flashed cm10 to my xperia acros recently and i want to downgrade to stock ICS SO,PLEZZZZZ HELP
please can any one answer me how i can downgrade from cm10 JB 4.1 to ICS on xperia acro s
Flash stock ROM
dastin1015 said:
Flash stock ROM
Click to expand...
Click to collapse
thank u for answering me but i have another question
how i can flsh the stock kernel becaus with cm10 i have coustome kernel?
Hi
I have a Xperia neoL Phone.
after installing any custom kernels with proper custom rom my touch screen stops working
and it doesnt work at all but physical buttons are working fine.
I have tried every appropriate rom for Neol with its Proper kernel In this forum and xperia Play forum, but no one had touch screen working for me.
Please help me.
I really want to install custom Roms
Does your touchscreen work when you flash a stock ftf?
Sent from my MT25i using xda app-developers app
reflash the stock .ftf installed on your device when touch was working fine and see if your touch works
if not
reflash all the available stock .ftf s to make sure if its a hardware isssue or software
no need to say if these didnt work its probably a hardware issue and get your phone to sony servive center
hossein7292 said:
reflash the stock .ftf installed on your device when touch was working fine and see if your touch works
if not
reflash all the available stock .ftf s to make sure if its a hardware isssue or software
no need to say if these didnt work its probably a hardware issue and get your phone to sony servive center
Click to expand...
Click to collapse
Thanks for your reply
I dont have any problem in stock .631 .587 or other stock roms
My only problem is with custom kernels . when installing custom kernel touch will not work
4n00p said:
Does your touchscreen work when you flash a stock ftf?
Sent from my MT25i using xda app-developers app
Click to expand...
Click to collapse
yes my touch has no problem with any stock rom.
karo222 said:
yes my touch has no problem with any stock rom.
Click to expand...
Click to collapse
Then i think its because the kernel didint flash properly how did u flash the kernel?
4n00p said:
Then i think its because the kernel didint flash properly how did u flash the kernel?
Click to expand...
Click to collapse
I tried all ways
using Quickimg flashtools and using cmd but all was the same
firs time when i get the phone and it was on official rom .631 I rooted it installed Nxt kernel using quickimg and installed Honami rom and it worked fine
But after some days I want to install jb roms and as I remember I installed Lupus jb kernel and after that my touch stopeed working I have tried al other kernels available for neo L but no one has touch working.
Even in Nxt kernel with honami rom that i used first time with no problem , it has no touch
the only way I have touch is with official roms....
karo222 said:
I tried all ways
using Quickimg flashtools and using cmd but all was the same
firs time when i get the phone and it was on official rom .631 I rooted it installed Nxt kernel using quickimg and installed Honami rom and it worked fine
But after some days I want to install jb roms and as I remember I installed Lupus jb kernel and after that my touch stopeed working I have tried al other kernels available for neo L but no one has touch working.
Even in Nxt kernel with honami rom that i used first time with no problem , it has no touch
the only way I have touch is with official roms....
Click to expand...
Click to collapse
Have you used flashtool???
also does touch work when you use the TWRP in turbo kernel or is it only when you boot into the system?
4n00p said:
Have you used flashtool???
also does touch work when you use the TWRP in turbo kernel or is it only when you boot into the system?
Click to expand...
Click to collapse
Yes I used flashtools for flashing kernel and stock roms.
touch is not working in TWRP also and I have to use CWM recovery for flashing rom
karo222 said:
Yes I used flashtools for flashing kernel and stock roms.
touch is not working in TWRP also and I have to use CWM recovery for flashing rom
Click to expand...
Click to collapse
hey guys i have the same problem exactly does anyone have any solution for this i've searched a lot no one really knows what is the problem
Any Solutions.............?
Did anyone find any solution for this problem. Please help us....
Hi, im having an issue with my Xperia U.
The touchscreen only work in some roms, JB and KitKat dont work, some ICS too...
on MIUIv5 work and Infity Rom v3 too.
What can be this problem?
iced2009 said:
Hi, im having an issue with my Xperia U.
The touchscreen only work in some roms, JB and KitKat dont work, some ICS too...
on MIUIv5 work and Infity Rom v3 too.
What can be this problem?
Click to expand...
Click to collapse
if touchscreen also fails in stock roms ...relock BL , reflash ur backed up .ta partition .... give it to sony for touchscreen issues .. else maybe u are not flashing the kitkat/jb roms properly
suyash691 said:
if touchscreen also fails in stock roms ...relock BL , reflash ur backed up .ta partition .... give it to sony for touchscreen issues .. else maybe u are not flashing the kitkat/jb roms properly
Click to expand...
Click to collapse
I follow this video for JB:
for kitkat I only flashed in cwm... doing wipe in what the post say.
iced2009 said:
I follow this video for JB:
for kitkat I only flashed in cwm... doing wipe in what the post say.
Click to expand...
Click to collapse
try devswift's jb ..... and kitkat first u hv to fastboot flash boot.img then go to cwm then flash rom (at least for xperia go this is hw u do it)