I have eu rom installed i want to switch to asia retail is der any way??
shrenn said:
I have eu rom installed i want to switch to asia retail is der any way??
Click to expand...
Click to collapse
Yes you can do that ...but
Why would you want to do that ? ....
I have a Asia retail Razr xt910(GSM) and I have flashed a EU ROM ... my point is as long as your Netowrk and Data are working ( apart from the main functions of course) I guess u must be OK with it right?
SAJdroid said:
Yes you can do that ...but
Why would you want to do that ? ....
I have a Asia retail Razr xt910(GSM) and I have flashed a EU ROM ... my point is as long as your Netowrk and Data are working ( apart from the main functions of course) I guess u must be OK with it right?
Click to expand...
Click to collapse
I am having sms issues in thas eu version thatsy i wanted to switch... Sms were working fine for me in asiaretail rom after update...
shrenn said:
I am having sms issues in thas eu version thatsy i wanted to switch... Sms were working fine for me in asiaretail rom after update...
Click to expand...
Click to collapse
Ok, just try GoSms from Play store before you flash back to Asiaretail..
You need to get your AsiaRetail fastboot files and flash it in the same manner you did for eu .. make sure you get the correct version (CDMA/UMTS)
Advice : You can use recoveries like Bootmenu or Safestrap that allows you to keep your stock safe while u can play with other ROM's on another partition if you plan to use custom roms
SAJdroid said:
Ok, just try GoSms from Play store before you flash back to Asiaretail..
You need to get your AsiaRetail fastboot files and flash it in the same manner you did for eu .. make sure you get the correct version (CDMA/UMTS)
Advice : You can use recoveries like Bootmenu or Safestrap that allows you to keep your stock safe while u can play with other ROM's on another partition if you plan to use custom roms
Click to expand...
Click to collapse
Thanks...
Related
Hi all,
I am finally going to install a leak after the Moto UK soak test ****ed up last week.
I'm running 651.167.26.XT910.Retail.en.EU stock (but rooted) and want to install whichever is the best 4.0.4 leak/ROM is easiest to do.
Which, any how?
Thanks
adaimespechip said:
Hi all,
I am finally going to install a leak after the Moto UK soak test ****ed up last week.
I'm running 651.167.26.XT910.Retail.en.EU stock (but rooted) and want to install whichever is the best 4.0.4 leak/ROM is easiest to do.
Which, any how?
Thanks
Click to expand...
Click to collapse
Rds Lite with the sbf files from here:
http://forum.xda-developers.com/showthread.php?t=1747800
If you whant there is an update for tht version with shoul improove battery life and the radio
http://forum.xda-developers.com/showthread.php?t=1755764
The instruction to isntall the second update are in the first post
I forgot, if you install from rds lite maybe you need to wipe data/cache to make it work. So if you don't want to do it (but i suggest you to do it and make a backup with titanium, so the system will be clean) you have to update from the ota files
Thanks for the reply - Will give this a go when I get home later on!
How do I get RSD to pick up the downloaded zip.. What do I use to extract it?
adaimespechip said:
How do I get RSD to pick up the downloaded zip.. What do I use to extract it?
Click to expand...
Click to collapse
You have to unzip it, then with rds lite you have to select the xml file that is inside the sbf files
Managed it- upgraded to rsd 5.7 and it picked it straight up
Sent from my XT910 using xda app-developers app
Motorola xt910 Stuck in fastboot mode
Hi guys,
I have a motorola xt910 verizon that a friend of mine gave it to me, and its stuck in the fastboot mode it was running a 651.167.22.XT910.Retail.en.fr, when I tried to flash another rom via rsd it failed, and I also tried vi flashme.bat but it failed again.
So, I was trying to flash a ics rom, I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr version.
Does anyone can help me find that 651.167.26.XT910.Retail.en.fr version to flash it via rsd?
Cheers:fingers-crossed::fingers-crossed::fingers-crossed:
( Sorry for my english )
Dário_Remane said:
Hi guys,
I have a motorola xt910 verizon that a friend of mine gave it to me, and its stuck in the fastboot mode it was running a 651.167.22.XT910.Retail.en.fr, when I tried to flash another rom via rsd it failed, and I also tried vi flashme.bat but it failed again.
So, I was trying to flash a ics rom, I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr version.
Does anyone can help me find that 651.167.26.XT910.Retail.en.fr version to flash it via rsd?
Cheers:fingers-crossed::fingers-crossed::fingers-crossed:
( Sorry for my english )
Click to expand...
Click to collapse
if it's a Verizon model, it's not an XT910,
if it had 651.167.26.XT910.Retail.en.fr it's not a Verizon model
Sent from my XT1254 using XDA Labs
sd_shadow said:
if it's a Verizon model, it's not an XT910,
if it had 651.167.26.XT910.Retail.en.fr it's not a Verizon model
Sent from my XT1254 using XDA Labs
Click to expand...
Click to collapse
Thanks for the reply, and sorry I was wrong, its a xt910 model.
It was running 651.167.22.XT910.Retail.en.fr, and its stuck in the fastboot mode can't enter in the recovery.
I wanted to flash it to a ics rom but I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr and I can't find it anywhere, all the websites that used to have this rom are down.
Can you please help ! ! ! !
Dário_Remane said:
Thanks for the reply, and sorry I was wrong, its a xt910 model.
It was running 651.167.22.XT910.Retail.en.fr, and its stuck in the fastboot mode can't enter in the recovery.
I wanted to flash it to a ics rom but I was told that first I had to flash the 651.167.26.XT910.Retail.en.fr and I can't find it anywhere, all the websites that used to have this rom are down.
Can you please help ! ! ! !
Click to expand...
Click to collapse
You have here everything
http://forum.xda-developers.com/droid-razr/general/index-motorola-droid-razr-development-t3023837
And you can flash any EU sbf file...
Here is an ICS stock rom on my Mega account
https://mega.nz/#!8cdwjBCL!Md8-HLx3ha8ZBVRjoVcy_iCdCr8teBceTG09S_To31E
And JB
https://mega.nz/#!EJ931TqQ!CJ90LQMpwt8vJn-h9OGaeFAor3A6S5ukazES-RwRorg
welder73 said:
You have here everything
http://forum.xda-developers.com/droid-razr/general/index-motorola-droid-razr-development-t3023837
And you can flash any EU sbf file...
Here is an ICS stock rom on my Mega account
https://mega.nz/#!8cdwjBCL!Md8-HLx3ha8ZBVRjoVcy_iCdCr8teBceTG09S_To31E
And JB
https://mega.nz/#!EJ931TqQ!CJ90LQMpwt8vJn-h9OGaeFAor3A6S5ukazES-RwRorg
Click to expand...
Click to collapse
Thanks mate
I will check there.
i want a rom for EU 4.1.2 offical,thankyou!
zjx9461 said:
i want a rom for EU 4.1.2 offical,thankyou!
Click to expand...
Click to collapse
are you sure to getted 4.1.2 EU offical?
jaychoo said:
are you sure to getted 4.1.2 EU offical?
Click to expand...
Click to collapse
my phone is china 4.1.2,i want to install hashcode's cm10.1,i install it to rom-slot1,but can't boot ,so i thk is the rom&kernel's problem
I want lap dance from playboy bunny
zjx9461 said:
i want a rom for EU 4.1.2 offical,thankyou!
Click to expand...
Click to collapse
So do we all. There isn't one. In fact, can I demand 4.2.2 Hong Kong, thanks.
Status:
- stock ICS 4.0.4 (system 1) and AUS stock JB 4.1.2 (system 2)
- removed CID
- now want to move AUS stock JB 4.1.2 from system 2 to system 1
Questions:
- Can I directly backup system 2 and restore it on system 1 ??
If AUS stock JB 4.1.2 was moved to system1
- Can I directly restore stock ICS 4.0.4 to system 1 from backup directly ?? Or need to flash with RSD ??
Thanks
williamlaw said:
Status:
- stock ICS 4.0.4 (system 1) and AUS stock JB 4.1.2 (system 2)
- removed CID
- now want to move AUS stock JB 4.1.2 from system 2 to system 1
Questions:
- Can I directly backup system 2 and restore it on system 1 ??
If AUS stock JB 4.1.2 was moved to system1
- Can I directly restore stock ICS 4.0.4 to system 1 from backup directly ?? Or need to flash with RSD ??
Thanks
Click to expand...
Click to collapse
Answer to
Q1) No u shld not do that!
Q2) you can install aus jb 4.1.2 on system 1 fresh and directly....If you do take a backup of system 1 you can restore ur SYSTEM safely as stock on system 1
hrishi21007 said:
Answer to
Q1) No u shld not do that!
Q2) you can install aus jb 4.1.2 on system 1 fresh and directly....If you do take a backup of system 1 you can restore ur SYSTEM safely as stock on system 1
Click to expand...
Click to collapse
- It will not locked by bootloader ?? since some articles written after upgraded to 4.1.2 can't downgrade back to 4.0.4.
- otherwise, do i still need to remove CID even installed aus jb 4.1.2 in system 1 ??
actually I want to use aus jb 4.1.2 in system 1, then flash cm10.2 to system 2 and keep backup of stock ics 4.0.4
williamlaw said:
- It will not locked by bootloader ?? since some articles written after upgraded to 4.1.2 can't downgrade back to 4.0.4.
- otherwise, do i still need to remove CID even installed aus jb 4.1.2 in system 1 ??
actually I want to use aus jb 4.1.2 in system 1, then flash cm10.2 to system 2 and keep backup of stock ics 4.0.4
Click to expand...
Click to collapse
While using Via BMM...You can do all this
4.1.2 on stock slot
& CM10.2 on webtop system partition(system 2 on BMM)
and yes you can backup your 4.0.4 for emergency!
hrishi21007 said:
While using Via BMM...You can do all this
4.1.2 on stock slot
& CM10.2 on webtop system partition(system 2 on BMM)
and yes you can backup your 4.0.4 for emergency!
Click to expand...
Click to collapse
- but for 4.1.2 on stock slot, still need to remove CID ??
- 4.0.4 can return to stock slot ??
williamlaw said:
- but for 4.1.2 on stock slot, still need to remove CID ??
- 4.0.4 can return to stock slot ??
Click to expand...
Click to collapse
You replace the CID becoz u change the region of the ROM that is flashed on ur phone..
E.g. a asian razr wont need to remove CID if the ROM was based up of Asian Stock system base...
but if asian razr is to be flashed with US based Rom...u need to remove CID...
i hope that clears your CID doubts
yes you can return back to stock if u need but do keep in mind to restore the CID when u do!
hrishi21007 said:
You replace the CID becoz u change the region of the ROM that is flashed on ur phone..
E.g. a asian razr wont need to remove CID if the ROM was based up of Asian Stock system base...
but if asian razr is to be flashed with US based Rom...u need to remove CID...
i hope that clears your CID doubts
yes you can return back to stock if u need but do keep in mind to restore the CID when u do!
Click to expand...
Click to collapse
- ok, i have understood the purpose of CID.
- how about bootloader ? moto not locked it then we can't downgrade to earlier version rom ??
williamlaw said:
- ok, i have understood the purpose of CID.
- how about bootloader ? moto not locked it then we can't downgrade to earlier version rom ??
Click to expand...
Click to collapse
If you flash JB with RSD Lite then you can't go back to ICS.
But if you flash roms with BMM (with CID erased),then you can do whatever you want.
Sent from my Razr XT910
williamlaw said:
- ok, i have understood the purpose of CID.
- how about bootloader ? moto not locked it then we can't downgrade to earlier version rom ??
Click to expand...
Click to collapse
If you have BMM installed on ur RAZR...u can switch 4.0.4 to 4.1.2 and beyond and back till 4.0.4
Thanks All !!
welder73 said:
If you flash JB with RSD Lite then you can't go back to ICS.
But if you flash roms with BMM (with CID erased),then you can do whatever you want.
Sent from my Razr XT910
Click to expand...
Click to collapse
one more question, if i backup from system 1, then MUST restore it on system 1 ?? I can't restore on other system 2,3,4 ??
thanks
ogerors seen
Good to know, understand, I'm learning a lot with you
Hi everyone! I'm new to this Moto Razr XT910, a korean version one. I have a few questions to ask:
-Is this the device that has an official support by CM? the code named umts_spyder builds? I'm just confused by the other variants ://
-Since this is a korean version with AT&T on it, can I change this to a sim-free (international version)? If so, can you link me some useful guides out there? I've searched for a couple of hours but I never found a good guide for noobies containing on how-to flashing and unlocking bt
I'm an experienced user on flashing this on that and compiling this and that but hope you could understand my situation as if this is a new phone to me Thanks alot! Just an urgent matter.
XT910 is the umts_spyder and it is officially supported by CM.
As for the sim-lock, I'm not certain that xt910 are carrier locked but if they are, it ain't very common hence no unlocking guide.
While the flashing in short goes like this.
1.) Root
2.) Download a recovery (Safestrap or BMM).
3.) Install recovery.
4.) Boot into recovery.
5.) Create a ROM-slot.
6.) Wipe all
7.) Flash ROM zip.
8.) Flash additional zip if any.
9.) Reboot.
Not very detailed but get the idea.
DROID RAZR with Tapatalk 4
neo.ank said:
XT910 is the umts_spyder and it is officially supported by CM.
As for the sim-lock, I'm not certain that xt910 are carrier locked but if they are, it ain't very common hence no unlocking guide.
While the flashing in short goes like this.
1.) Root
2.) Download a recovery (Safestrap or BMM).
3.) Install recovery.
4.) Boot into recovery.
5.) Create a ROM-slot.
6.) Wipe all
7.) Flash ROM zip.
8.) Flash additional zip if any.
9.) Reboot.
Not very detailed but get the idea.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Thank you so much! The only stuff that I'm worrying about is the incompatibilities between flashing an international version ROM to a region specified device which is a Korean version. After some deep searches, thank goodness I found this post on a thread being discussed about converting a region specified device into an international one. Anyway here it is:
Semseddin said:
I can't provide you in details since there're are guides for it but briefly you'd have to delete cid with fastboot or bmm but make a backup of it before deletion. You can flash all XT910 firmwares with fastboot just don't forget to delete the cdt.bin line from the RSD LITE XML files that you'd flash. This way cdt.bin partition on your device will not be upgraded to 5 or 7 and stay version 4 which is ICS.
Better create a nandroid backup of your stock rom with bmm recovery and provide necessary files from your device to find stock fastboot of XT910S ICS to firmware-team ?
Click to expand...
Click to collapse
Do you know what is RSD lite XML file and cdt.bin? is these two included on the ROM you'll flash? Anyway, once I've upgraded to ICS, can I freely flash any JB to KK based ROMs? Sorry for bothering with all of my dumbness
EDIT
Nevermind, I just knew RSD lite
neo.ank said:
XT910 is the umts_spyder and it is officially supported by CM.
As for the sim-lock, I'm not certain that xt910 are carrier locked but if they are, it ain't very common hence no unlocking guide.
While the flashing in short goes like this.
1.) Root
2.) Download a recovery (Safestrap or BMM).
3.) Install recovery.
4.) Boot into recovery.
5.) Create a ROM-slot.
6.) Wipe all
7.) Flash ROM zip.
8.) Flash additional zip if any.
9.) Reboot.
Not very detailed but get the idea.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
One more question, I've been through some xda and google searches and I hope this statement I've found is TRUE :fingers-crossed:
-Since my device is a Korean Version with a specified carrier on it, flashing ICS update on this device will activate its network for a global use which is considered now for international use... is that true? Does it mean that I don't have to delete some lines inside the xml file anymore? :fingers-crossed: and just root it, install BMM or SS recovery and flash CM11 on it? Do I really have to delete CID partition before flashing JB and KK based ROMs? Please needing your help
EDIT:
-Someone said that you can flash any region based firmware to your device? is it true?
-My device is actually an XT910S, do I only have to flash XT910S based ROMs? or any of them (XT910 and XT910K)?
-Can I flash CM11 with stock 2.3.5? or is it really necessary to update to ICS in order to flash JB and KK based ROMs?
Pleaseee Im begging you
JovieBrett said:
One more question, I've been through some xda and google searches and I hope this statement I've found is TRUE :fingers-crossed:
-Since my device is a Korean Version with a specified carrier on it, flashing ICS update on this device will activate its network for a global use which is considered now for international use... is that true? Does it mean that I don't have to delete some lines inside the xml file anymore? :fingers-crossed: and just root it, install BMM or SS recovery and flash CM11 on it? Do I really have to delete CID partition before flashing JB and KK based ROMs? Please needing your help
EDIT:
-Someone said that you can flash any region based firmware to your device? is it true?
-My device is actually an XT910S, do I only have to flash XT910S based ROMs? or any of them (XT910 and XT910K)?
-Can I flash CM11 with stock 2.3.5? or is it really necessary to update to ICS in order to flash JB and KK based ROMs?
Pleaseee Im begging you
Click to expand...
Click to collapse
The international usage after ICS update is for the cdma version XT912 so it doesn't apply to you. As I said earlier, A carrier locked XT910 isn't very common.
As for the region specific ROMS, The custom ROMs are not region specific but if you want to flash stock MOTO roms then you need to consider the region.
However, many Asian users can flash European JB builds without deleting their cid.
As far as I know, you do need to upgrade in order to flash custom ROM.
But you can surely try to root it before upgrading and see if you can install SS or BMM.
DROID RAZR with Tapatalk 4
neo.ank said:
The international usage after ICS update is for the cdma version XT912 so it doesn't apply to you. As I said earlier, A carrier locked XT910 isn't very common.
As for the region specific ROMS, The custom ROMs are not region specific but if you want to flash stock MOTO roms then you need to consider the region.
However, many Asian users can flash European JB builds without deleting their cid.
As far as I know, you do need to upgrade in order to flash custom ROM.
But you can surely try to root it before upgrading and see if you can install SS or BMM.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Thank you for the response. So it means, I will update the device via OTA update first to get the stock JB 4.1.2 then after that, I can now be able to flash custom ROMs whatever I want?
Yes that should do it.
Do check the root thread for supported builds before updating though.
DROID RAZR with Tapatalk 4
neo.ank said:
Yes that should do it.
Do check the root thread for supported builds before updating though.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Thank you, btw do you know how to backup CID?
JovieBrett said:
Thank you, btw do you know how to backup CID?
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showthread.php?p=36172192
Maybe this will help you.
Sent from my Razr XT910
welder73 said:
Here http://forum.xda-developers.com/showthread.php?p=36172192
Maybe this will help you.
Sent from my Razr XT910
Click to expand...
Click to collapse
WOW thank you so much! I've made a backup now ^_^ Will give you thanks later cause I've ran out of thank mehehe
welder73 said:
Here http://forum.xda-developers.com/showthread.php?p=36172192
Maybe this will help you.
Sent from my Razr XT910
Click to expand...
Click to collapse
Anyway do you know how to fix and what is the error behind this while Im flashing via RSD, it says something like "ebr failed"
if i was on costum rom 4.2.2
i want back to stock which rom have to take
abumaha said:
if i was on costum rom 4.2.2
i want back to stock which rom have to take
Click to expand...
Click to collapse
You are on gsm band i think so use an european one from here http://forum.xda-developers.com/showthread.php?t=2231289
Try british retail,work fine for me