Hi,
Just upgraded my Orange M1000 to ROM version 1.66.00WWE.
Reinstalling the driver for my IR foldable keyboard (http://www.suntekstore.com/unwiirpdake5.html) causes the device to hang after a soft reset - only solution seems to be a hard reset.
Any suggestions to possibly solve this?
/Mads
My Samsung Galaxy S2 is not responding to the vibration setting. Does anyone know how to fix the problem?
Need a lil more info from ya, plz. What are ur settings that u r trying to get working ??
And just in case ur talking about Haptic feedback...it is disabled if u have Power saving mode on.
If ur not talking about haptic, then have u looked in Settings/Sound at Vibration intensity ? Have u tried a reboot ?
Vibration Problem
I have turned up all of the settings in vibration intensity, I have set the device vibration to basic calls and enabled Haptic Feedback but my phone just isn't vibrating period. None of the settings seem to work.
..... And yes I did reboot a couple of times.
It sounds like it could be a hardware failure of the vibrator device. To test whether the problem is hardware or firmware related, if the phone has custom firmware, then perform a wipe data/factory reset and flash back to stock. If the problem persists, then it is very likely a hardware issue. If the phone is currently on stock, then perform a wipe data/factory reset and re-flash stock.
Vibration Problem
creepyncrawly said:
It sounds like it could be a hardware failure of the vibrator device. To test whether the problem is hardware or firmware related, if the phone has custom firmware, then perform a wipe data/factory reset and flash back to stock. If the problem persists, then it is very likely a hardware issue. If the phone is currently on stock, then perform a wipe data/factory reset and re-flash stock.
Click to expand...
Click to collapse
Thank you very much! I will follow the instructions that you have given.
hi guys, i'm new here and i come with a problem...
I have an i9300 model
BASEBAND version: I9300UUGMK1
Kernel version: [email protected] #1 Frie Dec 13 21:55:31 KST 2013
Build number: JSS15J.I9300XXUGML2
Android version: 4.3 (with root used for unlocking)
Today i saw a problem... sometimes my touch don't work, but if i lock and unlock the screen works perfectly for a quite short period... I don't understand were the problem is, can you help me please?
Backup data and factory reset .
Read multiple identical posts .
JJEgan said:
Backup data and factory reset .
Read multiple identical posts .
Click to expand...
Click to collapse
sorry, i forgot to say that i already did the factory reset and the symptoms are the same. Could be a software issue?
If it was a hardware problem would not work at all, right?
*#0*# tests:
touch test result: PASSED OK with no other problem,
Dimming: One touch result: Dimming, Second touch: nothing
RED, GREEN, BLUE: no dead pixels
Reciever, speaker, cameras: OK
Sensors: OK
r3dspy said:
sorry, i forgot to say that i already did the factory reset and the symptoms are the same. Could be a software issue?
If it was a hardware problem would not work at all, right?
*#0*# tests:
touch test result: PASSED OK with no other problem,
Dimming: One touch result: Dimming, Second touch: nothing
RED, GREEN, BLUE: no dead pixels
Reciever, speaker, cameras: OK
Sensors: OK
Click to expand...
Click to collapse
Re-flash stock via odin if problem persists it's most likely hardware.
I had flashed with odin(Android 4.3 COA - international Cosmote ROM) but the problem persists.
Today, i went to a gsm service, and told me that the hardware seems to be ok, i suppose that they did the same tests...
Diagnostic: unknown.
Can you give me an advice? What hardware part do you think i have to change? (I don't want to change the display because it's expensive)
r3dspy said:
I had flashed with odin(Android 4.3 COA - international Cosmote ROM) but the problem persists.
Today, i went to a gsm service, and told me that the hardware seems to be ok, i suppose that they did the same tests...
Diagnostic: unknown.
Can you give me an advice? What hardware part do you think i have to change? (I don't want to change the display because it's expensive)
Click to expand...
Click to collapse
Try a custom rom (like neatrom 4.4.2) and see if the problem still persists. If it does, deffinetly hardware problem.
You would have probably noticed by now if it was this, but it's worth a try. Aren't you by any chance experiencing these issues only while charging? Low quality/faulty/unfiltered power supplies sometimes lead to touch troubles.
Hello, I dropped my SK17i and now the touchscreen is not working. I cannot even press the pattern and get into mobile etc. So I want to hard reset it to check if this will solve my problem. The phone is not rooted neither has any custom rom. Is there any option to hard reset with keyboard?
I think it's impossible because your problem is hardware, not software
I have this weird issue with my LG g8X thinq. The gyroscope and accelometer sensors have stopped responding . It gets fixed temporarily once i facorty reset the phone but reappears when i restart the phone. I have done multiple factory resets and also flashed new firmware through LG bridge software. This is weird problem which i'm unable to understand it can't be software because i reinstalled firmware twice and also not hardware because it works unless i restart the phone. Please help anyone.
ff007 said:
I have this weird issue with my LG g8X thinq. The gyroscope and accelometer sensors have stopped responding . It gets fixed temporarily once i facorty reset the phone but reappears when i restart the phone. I have done multiple factory resets and also flashed new firmware through LG bridge software. This is weird problem which i'm unable to understand it can't be software because i reinstalled firmware twice and also not hardware because it works unless i restart the phone. Please help anyone.
Click to expand...
Click to collapse
i m sure u must have done this but if now... try hard reset with volume down and power button. hopefully it will solve the issue else get the piece replaced asap.