Does anyone know if the backlight is suppose to stay on when the phone is charging while powered off? I was going to sleep and noticed after the battery indicator went away the backlight was slightly lit. Can anyone check on their phone for me? It's only noticeable in the dark. It's just unsettling that the blacklight be on for 8+ hours a night.
Mine does it to. If I remember right turning it off while plugged in stops that from happening.
Glad I'm not the only one. It bugs me a lot. I had to turn my phone on while it was charging just to make sure the back light stayed off. I'll try plugging it in then powering off.
Sent from my LG-E970 using xda premium
Haha yeah it's off... Silly.
whiteguypl said:
Haha yeah it's off... Silly.
Click to expand...
Click to collapse
?..I don't understand.
[/COLOR]
Joecascio2000 said:
Glad I'm not the only one. It bugs me a lot. I had to turn my phone on while it was charging just to make sure the back light stayed off. I'll try plugging it in then powering off.
Hi, Did you solve that problem?? I dont like that the backlight stays on while the phone is turn off and charging.
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
Oscar9018 said:
Hi, Did you solve that problem?? I dont like that the backlight stays on while the phone is turn off and charging.
---------- Post added at 03:58 PM ---------- Previous post was at 03:38 PM ----------
Hi, Did you solve that problem?? I dont like that the backlight stays on while the phone is turn off and charging.
Click to expand...
Click to collapse
Yeah if you flash the Alternate Teenybin with LGNPST it fixes the bootloader/fastboot. This fixes the backlight while phone is powered down. And also adds visual graphics to the fastboot menu. (No more navigating blindly.)
Sent from my LG-E970 using xda premium
Joecascio2000 said:
Yeah if you flash the Alternate Teenybin with LGNPST it fixes the bootloader/fastboot. This fixes the backlight while phone is powered down. And also adds visual graphics to the fastboot menu. (No more navigating blindly.)
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
But I have a question, Im on JB stock rom, if i flash the alternate Teenybin, can I back to my stock rom after reboot?. so, How can i solve this problem staying on JB stock rom?
Oscar9018 said:
But I have a question, Im on JB stock rom, if i flash the alternate Teenybin, can I back to my stock rom after reboot?. so, How can i solve this problem staying on JB stock rom?
Click to expand...
Click to collapse
If you are Stock JB, rooted, and already unlocked, just flash the alt teenybin. You won't lose any data or have to reflash your Rom. But I would ask in the teenybin thread just to make sure.
Sent from my LG-E970 using xda premium
Joecascio2000 said:
If you are Stock JB, rooted, and already unlocked, just flash the alt teenybin. You won't lose any data or have to reflash your Rom. But I would ask in the teenybin thread just to make sure.
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
Joecascio I flashed the alt teenybin and changed My stock ROM to SlickRom v3 and the problem did not dissapear ...have you any idea to solve it ??
Sent from my LG-E970 using xda app-developers app
Oscar9018 said:
Joecascio I flashed the alt teenybin and changed My stock ROM to SlickRom v3 and the problem did not dissapear ...have you any idea to solve it ??
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
OH that was my mistake. The backlight issue isn't fixed with the new alt bin/bootloader. I also remember someone saying that if you plug in the charger and then power down the phone it works. Maybe that's why it appeared to be fixed on my device. I specifically remember after flashing the alt bin I charged my phone while it was off and noticed that the backlight stayed off. Not sure why but I just tried it again and sure enough the backlight stayed on. That sucks. I've gotten into the habit of putting my phone on silent and charging while it is off. But I still don't like that. I wonder if the freegee devs know?
Related
I noticed that every time I select the power off option from CWM my phone turns back on in like 10 seconds. Anyone else got this?
Sent from my Super Galaxy Ace using XDA.
Which CWM ?
This was sent from a Galaxy Ace. Problem?
I get that everytime, never minded. Happens to me with both cwm4 and cwm5 on stock KP3, ddqk8 and stock based roms. Never tried doing it on cm based roms.
yeah, happen to me too.
I'm using this version of CWM.
http://forum.xda-developers.com/showpost.php?p=18178563&postcount=13
MicroLizard said:
yeah, happen to me too.
I'm using this version of CWM.
http://forum.xda-developers.com/showpost.php?p=18178563&postcount=13
Click to expand...
Click to collapse
Yeah, that's the same version I'm using.
Yeah...its annoying. I remove the battery.
Sent from my GT-S5830 using XDA
008bond said:
Yeah...its annoying. I remove the battery.
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
Me tooo
Sent from my GT-S5830 using Tapatalk 2
Im sure that's a kernel issue
Sent from my Nexus S using xda premium
scoffyburito said:
Im sure that's a kernel issue
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
Umm... no. Its not. For it to happen to a lot of people on different roms and kernels? You really think its a kernel issue?
It's probably an issue with cwm and it's also probably related to the type of kernel. To say the truth, I don't think it's that big a deal. It has posed no real problems to me when flashing, and if anything, removing the battery will do the trick. A minor inconvenience in an otherwise perfect tool.
yes, i encountered this issue too. I wonder how to turn off phone from recovery without take out battery
But NOT big deal for me
dxppxd said:
It's probably an issue with cwm and it's also probably related to the type of kernel. To say the truth, I don't think it's that big a deal. It has posed no real problems to me when flashing, and if anything, removing the battery will do the trick. A minor inconvenience in an otherwise perfect tool.
Click to expand...
Click to collapse
Its not a big deal, but its annoying. You'll have to wait till your phone boots to be able to turn it off. Taking off the case, then taking off the battery cover and taking out the battery is a lot of work to just turn your phone off.
SuperAce609 said:
Its not a big deal, but its annoying. You'll have to wait till your phone boots to be able to turn it off. Taking off the case, then taking off the battery cover and taking out the battery is a lot of work to just turn your phone off.
Click to expand...
Click to collapse
You are completely right. However, it's a free tool.
I mean, even the stock Samsung firmware gives Fc and issues every now and then and they do get paid by us users (both on acquisition and through Google adds, and free marketing data)
SuperAce609 said:
Umm... no. Its not. For it to happen to a lot of people on different roms and kernels? You really think its a kernel issue?
Click to expand...
Click to collapse
Same thing happened to a few people when they turned off their phone while charging and it turned back on. Meh it was worth a shot
Sent from my Nexus S using xda premium
A tip, when this happens to my gio I just hold the power button till it shuts off .
Sent from my GT-Si9300 using Tapatalk
(Frank) said:
A tip, when this happens to my gio I just hold the power button till it shuts off .
Sent from my GT-Si9300 using Tapatalk
Click to expand...
Click to collapse
Not on the Ace. If you hold the power button, it'll reboot and not power off.
me too
it happens to me on the official CWM 4.0.0.9
When i try to reflash my phone to the stock OS at the lowest battery level, I just turn off my phone when the phone is in download mode. Now i cant turn on my phone. Can't charging the phone or doing anything more.
Anyone please give me an advise in my case.
Thx
chickensoup1412 said:
When i try to reflash my phone to the stock OS at the lowest battery level, I just turn off my phone when the phone is in download mode. Now i cant turn on my phone. Can't charging the phone or doing anything more.
Anyone please give me an advise in my case.
Thx
Click to expand...
Click to collapse
Well more info is needed. What phone do you have (Model number). What were you flashing (Provide link)
122ninjas said:
Well more info is needed. What phone do you have (Model number). What were you flashing (Provide link)
Click to expand...
Click to collapse
my phone is SH-I777 and i reflash to I777UCKH OCD root no BL
chickensoup1412 said:
my phone is SH-I777 and i reflash to I777UCKH OCD root no BL
Click to expand...
Click to collapse
K remove battery and plug usb into computer but not into phone. Next hold the two volume buttons and plug in the usb to your phone and see if it boots.
I might be wrong about this, but it seems like you wiped your Os. You might need to find someone to do something called jtag (I think that's what it's called) its basically the process used during manufacturing to install the Os. Look up how to un brick a hard brick. You'll read more about it.
Sent from my SGH-I747 using xda app-developers app
luc.highwalker said:
I might be wrong about this, but it seems like you wiped your Os. You might need to find someone to do something called jtag (I think that's what it's called) its basically the process used during manufacturing to install the Os. Look up how to un brick a hard brick. You'll read more about it.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Nothing bad could have happened during that.
122ninjas said:
Nothing bad could have happened during that.
Click to expand...
Click to collapse
The phone turning off while having a new rom flashed? I could see something bad happening through that. But again, I might be wrong. Not really much of an expert on this stuff
Sent from my SGH-I747 using xda app-developers app
122ninjas said:
K remove battery and plug usb into computer but not into phone. Next hold the two volume buttons and plug in the usb to your phone and see if it boots.
Click to expand...
Click to collapse
I try that but it won't work T_T
luc.highwalker said:
The phone turning off while having a new rom flashed? I could see something bad happening through that. But again, I might be wrong. Not really much of an expert on this stuff
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I've heard only flashing bootloaders do that
---------- Post added at 05:20 PM ---------- Previous post was at 05:19 PM ----------
chickensoup1412 said:
I try that but it won't work T_T
Click to expand...
Click to collapse
Where are you getting the stock package from? Post the link
122ninjas said:
I've heard only flashing bootloaders do that
---------- Post added at 05:20 PM ---------- Previous post was at 05:19 PM ----------
Where are you getting the stock package from? Post the link
Click to expand...
Click to collapse
I use this one to reflash my phone http://forum.xda-developers.com/showthread.php?t=1285894
then I use Odin1.7 with pit 512.803 to flash the Siyah kernel v2.6.14 att
chickensoup1412 said:
I use this one to reflash my phone http://forum.xda-developers.com/showthread.php?t=1285894
then I use Odin1.7 with pit 512.803 to flash the Siyah kernel v2.6.14 att
Click to expand...
Click to collapse
Hmm odd
Let me see if I understand....
You flashed the package listed while your phone had low battery. While flashing, the battery ran out. Now it will not boot or change. Am I correct?
Sent from my SGH-I777 using xda premium
Red_81 said:
Let me see if I understand....
You flashed the package listed while your phone had low battery. While flashing, the battery ran out. Now it will not boot or change. Am I correct?
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
oh let see. I will tell you guys my case again.
I reset my phone to the factory reset then i flash the siyah v2.6.14 kernel by using odin3 v1.7 with the pit 2010803 but look like the odin process wont work so i unplug the usb cable and try to redo but it do nothing. Then i turn off power my phone. From that time till now i cant turn on my phone.
During the case happen my phone are in lower battery mode.
Anyone have idea to solve this prob please guide me.
Thx
I was not trying to be a ****. Your explanation was not quite clear and I wanted to make sure I had all the information.
When you plug your device into the wall charger, does it charge? Can you get your hands on a fully charged battery?
Sent from my SGH-I777 using xda premium
Red_81 said:
I was not trying to be a ****. Your explanation was not quite clear and I wanted to make sure I had all the information.
When you plug your device into the wall charger, does it charge? Can you get your hands on a fully charged battery?
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
when i plug my device into the wall charge nothing happen the charge screen doesn't appear. And i dont have any fully charged battery.
At this point I would recommend either buying a battery and external charger for it to see if your problem is a dead battery and a phone that is not charging. Otherwise, you will probably need a JTAG service to fix your phone. Mobiletechvideos is a service that has been used by many members. The owner is a member himself.
You could try another cable, but I don't think that is the issue. When the phone was killed mid flash it corrupted the system to the point that it won't charge or boot.
Sent from my SGH-I777 using xda premium
Red_81 said:
At this point I would recommend either buying a battery and external charger for it to see if your problem is a dead battery and a phone that is not charging. Otherwise, you will probably need a JTAG service to fix your phone. Mobiletechvideos is a service that has been used by many members. The owner is a member himself.
You could try another cable, but I don't think that is the issue. When the phone was killed mid flash it corrupted the system to the point that it won't charge or boot.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Sry but in at Vietnam now i dont know is here any support?
chickensoup1412 said:
Sry but in at Vietnam now i dont know is here any support?
Click to expand...
Click to collapse
Not sure about Vietnam, but MobileTech does international shipping for a fee.
I have an galaxy note 1 that just turned itself off and does not want to power on. Also, it just makes small vibrates.
Can anyone PLEASE help me.
Thanks
mick9300 said:
I have an galaxy note 1 that just turned itself off and does not want to power on. Also, it just makes small vibrates.
Can anyone PLEASE help me.
Thanks
Click to expand...
Click to collapse
Flash the stock GB ROM using Odin. Then update to ICS.
ROM: Jamie's 4.2.2. Previews\Jellybam v6.6.0\Sons Of Android.
Kernel: Chris's Aces Kernel.
Recovery: TWRP.
:thumb up: Give Thanks! :thumb up:
mick9300 said:
I have an galaxy note 1 that just turned itself off and does not want to power on. Also, it just makes small vibrates.
Can anyone PLEASE help me.
Thanks
Click to expand...
Click to collapse
Most likely you haz a stick power button. Common issue with the Note.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
---------- Post added at 04:16 PM ---------- Previous post was at 04:15 PM ----------
ZacksBuilds said:
Flash the stock GB ROM using Odin. Then update to ICS.
ROM: Jamie's 4.2.2. Previews\Jellybam v6.6.0\Sons Of Android.
Kernel: Chris's Aces Kernel.
Recovery: TWRP.
:thumb up: Give Thanks! :thumb up:
Click to expand...
Click to collapse
Would be hard to do without the phone powered on.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Bubbajoe40356 said:
Most likely you haz a stick power button. Common issue with the Note.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
---------- Post added at 04:16 PM ---------- Previous post was at 04:15 PM ----------
Would be hard to do without the phone powered on.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Sorry thought he meant it would vibrate a couple times then turn on :/
ROM: Jamie's 4.2.2. Previews\Jellybam v6.6.0\Sons Of Android.
Kernel: Chris's Aces Kernel.
Recovery: TWRP.
:thumb up: Give Thanks! :thumb up:
yeah also.. if you have a phone case on it... a tight one... it may be mashing on the power button... take the phone out of its case if you have one on it.... do a battery pull and try again.
good luck
Sounds like a brick! Try flashing ROM again.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Partridge86 said:
Sounds like a brick! Try flashing ROM again.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Again ....if it's not powering up....would be hard to do.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Sounds like a stuck power button.
ROM: Jamie's 4.2.2. Previews\Jellybam v6.6.0\Sons Of Android.
Kernel: Chris's Aces Kernel.
Recovery: TWRP.
:thumb up: Give Thanks! :thumb up:
mick9300 said:
I have an galaxy note 1 that just turned itself off and does not want to power on. Also, it just makes small vibrates.
Can anyone PLEASE help me.
Thanks
Click to expand...
Click to collapse
Your power button is stuck. The same thing happened to mine. To remedy this, DON'T use the power button. Use volume to wake device up. Then program a button to turn screen off. Holding search button is my power off. Screen shots can be programmed too.
After awhile your button will become unstuck after not using it much. You'll still have to be careful though.
I was having issues with mine vibrating continuously a few times and and the Samsung logo would show up but then just go back to black.. I was able to get it into recovery mode to reflash that's why I mentioned it.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Partridge86 said:
Sounds like a brick! Try flashing ROM again.
Click to expand...
Click to collapse
Its not a brick if there's any sign of life. Does a brick vibrate itself?
Yes I , too , think you should boot into recovery. Do you know how to do that?
Sent from my SAMSUNG-SGH-I717 using xda premium
sorry, should have said soft brick for the anal people out there like ranger.
And by the way, you have yet to say anything that might be of any help on this thread so how about you stop trolling.
Partridge86 said:
sorry, should have said soft brick for the anal people out there like ranger.
Click to expand...
Click to collapse
Have you ever seen a brick? They are not soft. Brick means 100% dead.
Grow up.
Is it fixed yet?
How about now?
Now?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
I had this happen with my first i717 Note on AT&T. It happened shortly after it fell out of my lap. Everything else checked out and it ended up being a cable that had popped off. I buy my devices at BestBuy and always get black tie coverage, so I just took it back. New phone was there in 2 days time.
Yeah, many things lead to the almost dead phone. I didn't think about dropping-cable/connector unseating. That will go on my list of likely causes to investigate. Thanks.
This happened to me after I upgraded my twrp to 2.4.?- the newest version. It made my phone go nuts, unstable, and I had triple vibrates with no power on. Very weird! What fixed it- I long pressed power for 10-15 seconds, it triple vibrated, and then pushed power again and it would boot.
Also had trouble getting into the new recovery. I would hold volume -and+, power, wait for the triple vibration, release power- keep holding volumes till samsung flashed on screen, then release volumes. Then recovery would pop up.
After I rolled back to an older twrp, it was as normal as always.
I also had this issue once and it was battery related. Apparently the battery was so low that all it did was vibrate. So, you might want to check that as well.
i am experiencing the same issue tried everything i could thing of (battery pull,press and hold power button etc) everything but nothing worked please help
Since yesterday I am facing this problem.
Last evening the touchscreen of my phone just stopped responding. It happened so: all of the sudden the touch wouldn't respond. Pressing the power button to switch of the screen for sleep mode was not happening. The last thing I had done was pull down the notification bar so that so it was stuck there. I pressed and held the power button to restart and it worked fine. After a few hours again it happened. Restarted again. Worked. But now everytime its happening. It stops responding. I restart then it works for 2-3 minutes and stops responding and again Ihave to restart and again it stops after a couple of minutes.
I tried going into recovery mode and download mode and it enter and it charges properly also.
Also, last night I switched the phone off and I left it on charge annotd today morning when I switched it on the problem is still there.
please help me out
My galaxy s3 is rooted and its running on stock rom 4.1.2 and siryah kernel.
Is it a hardware problem or software? What can be done?
Another thing just happened now. It stopped responding while I was watching a video on youtube. The screen didnt respond but the video was working and after a while the video stopped but the audio was still playing!
R: HELP! S3 touchscreen not responding.
I heard somewhere syiah doesnt support 4.2 try another kernel. Did u update kernel/rom recently?
Have you tried removing the phone's battery and waiting for a half hour or so?
Sent from my GT-I9300 using xda app-developers app
killbubble said:
I heard somewhere syiah doesnt support 4.2 try another kernel. Did u update kernel/rom recently?
Have you tried removing the phone's battery and waiting for a half hour or so?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Its not 4.2 It's 4.1.2 Using the official one. And I have been using the siyah kernel for over a month now. Never seemed to cause a problem and never updated anything.
And no I didnt take out the battery. I just kept it switched off. Anyway I will do that too now.
R: HELP! S3 touchscreen not responding.
Okay....so you did nothing? Perhaps you're stressing the cpu/gpu too much and kernel does not totally support 4.2.x yet....try flashing perseus kernel also, it cant hurt...
Sent from my GT-I9300 using xda app-developers app
killbubble said:
Okay....so you did nothing? Perhaps you're stressing the cpu/gpu too much and kernel does not totally support 4.2.x yet....try flashing perseus kernel also, it cant hurt...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Should I flash stock firmwire then try rooting it again and then flash the kernel?
The thing is I used to use my phone while on charge. A friend says the circuits must have gone haywire but this doesn't seems like a hardware problem.
R: HELP! S3 touchscreen not responding.
oracle0008i said:
Should I flash stock firmwire then try rooting it again and then flash the kernel?
The thing is I used to use my phone while on charge. A friend says the circuits must have gone haywire but this doesn't seems like a hardware problem.
Click to expand...
Click to collapse
If u use your phone while on charge that only harms the battery (it will make it last less...but it is inevitable anyways who dooesnt use phone whike on charge)...
What would be the very best option would be to factory reset through recovery (u have clockworkmod right?) (U can save apps with titanium backup) and flash a new rom and THEN a new kernel.
If you flash foxhound it comes with kernel already backed.
BUT before doing this (nobody likes to start off fresh) just try flashing another kernel first(or try and get an updated version of siyah kernel, maybe you got the s2 variant, which has a higher build version than the s3, making it look obsolete).
Sent from my GT-I9300 using xda app-developers app
I flashed the updated siyrah kernel but the problem has not resolved.
Sent from my GT-P3110 using xda app-developers app
factory reset, flash a stock rom. if that doesn't help, send it in
oracle0008i said:
I flashed the updated siyrah kernel but the problem has not resolved.
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
Wipe phone in recovery flash stock rom and test .
jje
Same problem here, flashed stock rom stock kernel, and i tried custom roms and kernels but notting happens... touch screen still won't respond, i don't have warranty so i can forget about samsung service.. Any Help ????
elviss08 said:
Same problem here, flashed stock rom stock kernel, and i tried custom roms and kernels but notting happens... touch screen still won't respond, i don't have warranty so i can forget about samsung service.. Any Help ????
Click to expand...
Click to collapse
my one if not in use stays put but when I touch it once, it works for a while and stops. do you have a similar problem?
oracle0008i said:
my one if not in use stays put but when I touch it once, it works for a while and stops. do you have a similar problem?
Click to expand...
Click to collapse
Nope, i don't have this problem, mine doesn't work...
So I tried everything. Nothing worked. Thanks for your help guys. Guess I need to take it to samsung services.
Sent from my GT-P3110 using xda app-developers app
Any help ? :/
Give it for repair. Send some money.
Sent from my GT-P3110 using xda app-developers app
How come you don't have warranty in sgs3? It is not even 1 year old since first release
oracle0008i said:
Thanks for your help
Click to expand...
Click to collapse
there's a button for that
I flashed CM 10.1 and gAPPS(using cwmr), (I noticed that it took a LOT shorter than usual), and followed the instructions flawlessly, and when I was done with everything, I rebooted the phone, and nothing happened it went to the motorola logo and stayed there. I let it sit for a half an hour, and nothing happened. So I pulled out the battery, and loaded up CWMR again, I tried flashing it again making sure I did every step on the instructions and the same thing happened. After that, it wouldnt even boot up if I held down the power/sleep button, So I plugged it in to my computer, and it went to the motorola logo after about 2 minutes of a dark screen with the green LED on. I'm at a point where the only way I can power on the device is plugging it in to the charger. What would I have to do to install it successfully? Should I just go back to CM 10? and if so do I use a Micro SD card?
DauntingIllusions said:
I flashed CM 10.1 and gAPPS(using cwmr), (I noticed that it took a LOT shorter than usual), and followed the instructions flawlessly, and when I was done with everything, I rebooted the phone, and nothing happened it went to the motorola logo and stayed there. I let it sit for a half an hour, and nothing happened. So I pulled out the battery, and loaded up CWMR again, I tried flashing it again making sure I did every step on the instructions and the same thing happened. After that, it wouldnt even boot up if I held down the power/sleep button, So I plugged it in to my computer, and it went to the motorola logo after about 2 minutes of a dark screen with the green LED on. I'm at a point where the only way I can power on the device is plugging it in to the charger. What would I have to do to install it successfully? Should I just go back to CM 10? and if so do I use a Micro SD card?
Click to expand...
Click to collapse
Did you wipe everything down properly? Did you use the correct gapps version for 4.2.2? Did you have a fully charged battery?
Sent from my DROIDX using xda app-developers app
palmbeach05 said:
Did you wipe everything down properly? Did you use the correct gapps version for 4.2.2? Did you have a fully charged battery?
Sent from my DROIDX using xda app-developers app
Click to expand...
Click to collapse
I'm sure I did, yes. Yes I used the same one that was on the page I downloaded it from ( linuxmobile.org/atrix/cm10-1 ) and I'm sure I was at least at 50% I'm not sure if it was fully charged though.
DauntingIllusions said:
I'm sure I did, yes. Yes I used the same one that was on the page I downloaded it from ( linuxmobile.org/atrix/cm10-1 ) and I'm sure I was at least at 50% I'm not sure if it was fully charged though.
Click to expand...
Click to collapse
Just checking. Sometimes those questions can lead to the answer. Which cm10.1 build?
Sent from my DROIDX using xda app-developers app
palmbeach05 said:
Just checking. Sometimes those questions can lead to the answer. Which cm10.1 build?
Sent from my DROIDX using xda app-developers app
Click to expand...
Click to collapse
How can I find that out? The file is called "cm-10.1-20130826-UNOFFICIAL-epinter-olympus.zip" if that's what you were looking for.
DauntingIllusions said:
How can I find that out? The file is called "cm-10.1-20130826-UNOFFICIAL-epinter-olympus.zip" if that's what you were looking for.
Click to expand...
Click to collapse
Thats what i was looking for. So its the 8/26 build. Have you tried any other builds from epinter?
Sent from my DROIDX using xda app-developers app
palmbeach05 said:
Thats what i was looking for. So its the 8/26 build. Have you tried any other builds from epinter?
Sent from my DROIDX using xda app-developers app
Click to expand...
Click to collapse
I have not.. Is there another one I could try that actually works? also, I'm not having to wait ten minutes for the phone to boot up anymore. It boots, and sits at the "dual core technology" screen.
DauntingIllusions said:
I have not.. Is there another one I could try that actually works? also, I'm not having to wait ten minutes for the phone to boot up anymore. It boots, and sits at the "dual core technology" screen.
Click to expand...
Click to collapse
Yeah, epinter has all his builds on his download page
Sent from my DROIDX using xda app-developers app
palmbeach05 said:
Yeah, epinter has all his builds on his download page
Sent from my DROIDX using xda app-developers app
Click to expand...
Click to collapse
Is there a specific one that works(for you)? If so, which one? (I need to get this fixed ASAP.)
When it comes to ICS/JB ROMs, don't ever ask for "one that works". If you need a quick fix, go back to GB.
ravilov said:
When it comes to ICS/JB ROMs, don't ever ask for "one that works". If you need a quick fix, go back to GB.
Click to expand...
Click to collapse
I've tried that aswell.. It still doesn't boot that either..
DauntingIllusions said:
Is there a specific one that works(for you)? If so, which one? (I need to get this fixed ASAP.)
Click to expand...
Click to collapse
Personally, I've had no issues booting up on any ICS/JB ROM so far. the only thing that has been an issue is the touch screen. I made an error back in July/Aug to flash an alternate kernel, thinking that it would help. in the end, it killed half of my touchscreen.