FIXED
Hello,
Since yesterday I am not able to connect my Phone to Zune. I tried another laptop wich worked fine..
What I tried so far:
Reinstall zune + drivers.
Reinstall Windows 8.
Hard reset WP7.8
Diffrent USB port.
Even the device manager is not regonizing my Phone, or unknown hardware. Though it is connecting to another laptop. Other USB hardware does not give any problems.
Any help?
Dravik
Seems that my USB cable is dead, tried diffrent USB hardware on my cable wich are also not wokring..
Thanks
dravik said:
Seems that my USB cable is dead, tried diffrent USB hardware on my cable wich are also not wokring..
Thanks
Click to expand...
Click to collapse
No, just uninstall everything on pc affiliated with nokia, except ncs itself and zune, and reboot your pc.
Related
HI !
I have an HD² with official Operator's ROM and my HD² never sync with my computer.
I want to know if it's possible to Flash everything without any sync (only by SD)?
Thanks a lot for my LEO
settings menu all settings connections connections usb to pc, untick "faster data". restart the pc, restart the phone.
it should now sync fine.
Thanks for the Answer, but I've already do this and the results is the same.
Sorry about my English cause I'm French
Go into Bootloader Mode (hold Volume button down while switching on the phone). You will get a tri colour screen with the word 'Serial' at the bottom of it. Plug in the USB calbe and it should change to 'USB'. If this happens then you can run HSPL and then ROMs - just ignore the conditions about making an ActiveSync connection prior to running.
I've already try this
But not exactly how you say.
I've plug the in the USB calbe when the HD2 was Off, and after loading the bootloader.
And nothing was happen.
Juste the 3 colors and the SPL version but never "USB" or "Serials", serial appears only if I don't plug the cable.
Load it into Bootloader Mode, then connect the USB cable - and see if the 'Serial' changes to 'USB'. If it doesn't, then you have a hardware problem (phone or cable or computer).
I think it's a Phone probleme.
Cause I've a Samsung wave and I havn't any problem with the same cable and the same computer.
Also I can't flash my HD²...
Sph1nxXx said:
I think it's a Phone probleme.
Cause I've a Samsung wave and I havn't any problem with the same cable and the same computer.
Also I can't flash my HD²...
Click to expand...
Click to collapse
got another pc to try? what windows you using? stock usb cable? tried all your different usb ports? remembering to right click and "run as administrator"? no usb hub? if its 64bit windows, definately try a different pc.
samsamuel said:
got another pc to try? what windows you using? stock usb cable? tried all your different usb ports? remembering to right click and "run as administrator"? no usb hub? if its 64bit windows, definately try a different pc.
Click to expand...
Click to collapse
I've already Try on another computer.
I've try with my seven OS, and with XP OS.
The problem is the same.
But when I plug the USB cable, the computer says "unknown Device" and it's the same on different computer with different cable...
I think my HD2 mother card is probably broke for this.
when i connect my phone to my pc i dont get any notification on my handset and pc tells me the device is not recognized or the device has malfunctioned any ideas
i'm using w7 64, have the latest pc companion and my handset has 2.1 global.
any help greatly appreciated
chronic
edit - forgot to mention it charges fine via plug.
no ideas?
did you try to mount your sc card?
is pc companinon software still installed on your phone?
did you try to change usb port ??try to connect dirictly to mother board panel not the front usb hubs if it doesn,t work maybe the use cable you are using is corrupted one
asterix005 said:
did you try to mount your sc card?
is pc companinon software still installed on your phone?
Click to expand...
Click to collapse
How do I check this??
I have tried all usb ports and a different pc, I will try another usb cable
i've tried reinstalling pc companion on my pc, and a new usb cable... how do i check if i have pc companion software on my phone as i dont get any notification when i plug my phone in.... ?
thanks
chronic
Cant connect to Kies as it says USB device not recognized, used to but not anymore, dont see this problem in the S2 thread, anyone?
Currently using Win7 64
Thx
Same thing happened to me. I just reinstalled making sure all other programs were closed and I haven't had the problem since.
Hope this helps.
Install Kies .
Reboot phone
Start Kies
Connect Let KIES find phone .
Turn KIES off from taskbar .
Turn USB debugging on phone connect USB mass storage mode and let windows find driver .
That do work try all the other posts same subject for an alternative .
jje
No go
Tried all of the above, still no go, could it be my micro usb port on the phone is busted? When i tried connecting as Mass storage it says usb cable is connected, pls remove cable.
cablesguy said:
Tried all of the above, still no go, could it be my micro usb port on the phone is busted? When i tried connecting as Mass storage it says usb cable is connected, pls remove cable.
Click to expand...
Click to collapse
No thats just incorrect user settings .
Remove cable go to settings Applications Turn on USB debugging .
And?or turn usb mass storage mode on via settings Wireless and network USB settings then connect cable .
jje
JJEgan said:
No thats just incorrect user settings .
Remove cable go to settings Applications Turn on USB debugging .
And?or turn usb mass storage mode on via settings Wireless and network USB settings then connect cable .
jje
Click to expand...
Click to collapse
Yup, I did. I removed cables and turned on USB debugging, and tried the mass storage mode, upon connecting it says cable connected and to remove.
I'm getting this problem once I'm in Download mode. It's worked before... why would it stop?
Any tips?
I have the same problem
I seem to have the same problem I connect my phone via USB and get a USB Device Not Recognized message but MTP application opens on the phone. This has only just happened I have had it working before since I had the phone on 2 computers and have tried to different cables now it does not work on either computer. If any one has had any luck I would love to know how you fixed it.
Samsung Galaxy S2 - USB Device not recognized.
Hey Guys,
I have the same problem. I've even tried going into "Recovery" Mode and then running odin.. Still no luck. It just does not recognize the phone.
I tried a different cable but still no luck.
Guys,
i had had the same problem until i started to use the original USB cable(came with the phone).
Have a good luck!
Kirby
Got the same usb problem, different pc's, driver, cables nothing works.
After three month of use no Kies Odin ore mass storage us....big problem
any news info on this? seems to be quite common, though I only get it with stock roms, custom roms dont seem to have this issue
Cables Guy; I'm trying to figure out if I'm having the same problem as you. Does your phone charge when plugged in? Because mine does not.
i think in your case it might be the usb port in the phone itself, if nothing that you plug works well.
I believe there is an issue with kies/MTP and windows drivers for the rest though.
For me my phone doesnt get detected o nmy onboard USB but it does on the usb3 pccard i have.
any good news to solve this problems?
i got the same problem and worst case is my phone cannot detect sim
I had the same problem.. I just switched back to the original cable that came with the phone & problem was solved..
Sent from my SGH-T989D using XDA App
cablesguy said:
Cant connect to Kies as it says USB device not recognized, used to but not anymore, dont see this problem in the S2 thread, anyone?
Currently using Win7 64
Thx
Click to expand...
Click to collapse
whats your phone kernel? and are u able to connect to pc as usb storage? or did u flash anything weird before?
This is a new issue, it used to work fine, but now, whenever I plug a USB cable into my phone and PC, nothing happens on the PC(No usb found sound) and the phone just shows that it is charging. I opened Device Manager and plugged the phone in and it did not refresh or find anything new. No Unknown Devices in DM either. Currently I am working with a Windows 7 x86 laptop.
Things I have tried:
-Different PC
-Different USB cable
-Factory Reset
-Uninstall/reinstalled HTC drivers
I dont know what the issue is, do I have a bad USB port? Any suggestions?
same problem
bump
Hello guys, I recently bought an Atrix 4G from UK. The problem is that when I connect it with USB cable with PC (Windows 7 32bit) the PC recognize that the phone is connected but nothing appears on the notification bar on the phone. First tried with original FW 2.2.2 orange, after that rooted, unlocked the bootloader and installed CM7 but it is the same thing with it. I installed the latest USB drivers using motorola driver installing program from the official site, tried with other cable but nothing. RSD lite recognize it if this will help.. Does anyone know how to fix this issue.
strballer said:
Hello guys, I recently bought an Atrix 4G from UK. The problem is that when I connect it with USB cable with PC (Windows 7 32bit) the PC recognize that the phone is connected but nothing appears on the notification bar on the phone. First tried with original FW 2.2.2 orange, after that rooted, unlocked the bootloader and installed CM7 but it is the same thing with it. I installed the latest USB drivers using motorola driver installing program from the official site, tried with other cable but nothing. RSD lite recognize it if this will help.. Does anyone know how to fix this issue.
Click to expand...
Click to collapse
Question for you.... do you have an micro sd card in the atrix? That could be an issue. Also, you can look at your computer's usb settings to see if your phone can be forced into usb mode that way. Just giving some ideas.
Yes, I have SD card, tried without it but the same thing - no notification on the phone and nothing happen on the PC except the sound of connecting a USB device. How can I force it in USB mode?
strballer said:
Yes, I have SD card, tried without it but the same thing - no notification on the phone and nothing happen on the PC except the sound of connecting a USB device. How can I force it in USB mode?
Click to expand...
Click to collapse
Try looking in settings of the computer for USB drives.
That's when I start exploring a bit in that area when stuff doesn't connect to my laptop.
Sent from my Atrix XDA Premium App
Didn't find this function. Anyway the point is that the computer recognizes the phone but the phone does not show anything in the notification bar.
I just solved the problem :
1 - Turn off the phone.
2 - Turn on while holding volume up (RSD protocol mode)
3 - Connect the phone with USB cable to the PC, wait for windows to install the drivers, and disconnect.
4 - Restart the phone, and before connecting to the PC type in the dial box #5.
5 - Connect it with the USB cable.
I saw this advice from other forum.
I know it sounds stupid but this worked for me. Thanks anyway for the separated time.
Thank you
your advice saved my life
Lost usb connection with my laptop and home pc 3 days ago
Tried everithing you know what I mean
Most advices are for babies in kindergarten:
- bad usb cable
- wrong usb port
- usb debugging
- drivers
BS!
#5 really works / you need actually dial #5 with your phone app and then quick connect cable
I had the same problem ... I had to send it to motorola for warranty and they changed my mainboard!
Sent from my MB860 using Tapatalk
try the usb ports in the back of the pc with the "original usb cable for the atrix
also if your rooted download a teathering app called pda.net install it on your phone and pc it will provide proper drivers for the atrix
at&t atrix's had to do this when we were on 2.2 and it sure does work!
Thanks!
Thank you for this! Dialing #5 made the trick!