[Request] Samsung Galaxy Note 2 Verizon Drivers. - Verizon Samsung Galaxy Note II

I looked at the " How to root " forum and followed the links there for the alternate drivers for the phone. But the links are all bad now and cannot be downloaded.
Im having issues with Kies Air / Kies with the device and im getting the " Hardware Id Missing" " Windows cannot identify the device plugged into the SAMSUNG Mobile USB Composite Device".
Well i uninstalled all drivers and software. And now my phone will not communicate with the PC. Only wifi thru Kies Air.
I was once able to send text/check text at the convenience of my PC. But now i cannot.
Please help.

links work for me...just downloaded it again.

Related

[Q] "Gadget Serial" driver?

Attempting to update new Vibrant (Galaxy S) using "Unleash the beast v0.1" - post reboot my XP machine is asking for a "Gadget Serial" driver. I've been looking around for such a beast but not having much success. The phone is displaying a lovely "Do not turn off target!!" error too. Makes me a tad nervous.
Suggestions?
[Solution]
FWIW: This can be fixed by downloading "PC Studio" from Samsung. (This board isn't letting me post the link but you can search on the Samsung main site).
I tried installing that pc studio. Did not work. I have windows vista-64 bit.
Same problem
Hi I'm new in this forum and new to Android also.
I'm having the exact same problem, when I'm trying to flash my phone (AT&T Captivate) back to stock using Odin3 One-Click Downloader my PC is asking me for a Gadget Serial Driver.
I already install ( a few times ) the Phone drivers downloaded from the Samsung site and my PC recognize my phone with no issues. My problem is when I'm in Download mode.
I have a Samsung Captivate rooted with 2.1 update 1 (JH7)
MY PC is running Windows XP Professional Service Pack 3
I will try the PC Studio from Samsung
Problem solved
Problem solved after installing the Samsung PC Studio. Thanks
It did not fix my problem. Is there another fix? Device manager even says that it is "other device" no drivers.
Try installing Keis mini. i had the same problem and that fixed it.
samsung.com/us/support/downloads/SGH-I897ZKAATT
WTF are Samsung up to? Seriously?
I have a Galaxy S2 and i'm stuck on this Gadget driver issue. So I googled, found this thread and started looking. I've now found:
Kies Lite (Samsung site)
Kies 2.0 (Samsung site)
PC Studio 7.blah.blah... (Some driver download site)
PC Studio 3.blah (Samsung site)
NEW PC Studio 1.blah (Samsung site)
Talk about f*&king confused!
Oh and Kies 2.0 never finishes installing, I suspect its in a look as it sticks on "Evaulating Launch Conditions"...
WTF?
Anyone ANY clues on WHICH is the correct software AND version?
please anybody help us
I tried all of the above but nothing working. I tried on 2 different computers. one with
win7 64bit the other with winxp. both had the same problem. the stupid gadget serial
driver.
Try updating your Samsung drivers to the most recent ones:
http://forum.xda-developers.com/showthread.php?p=11633550#post11633550
I totally got it to work for my Galaxy SII
I remember putting my phone into some sort of usb tethering in the setting
so I just unchecked it and the drivers installed themselves
Settings> Wireless And Network > USB Utilities
and just push the connect to PC button and when you put your phone into Download mode the download wizard should install the drivers
Just so you wont switch..
From July 2012 Kies version
7HUND3R said:
Here it is: version 1.5.6.0 of the samsung usb drivers just extracted from latest updated kies
http://www.mediafire.com/?5fy7vwxhrhrpiwj
Click to expand...
Click to collapse
Pierrick
Gadget Serial
None of that worked for me. Doing the following worked for me. Basically you have to tell your pc what kind of driver this "Gadget Serial" is.
Goto "Device Manager".
Find the "Gadget Serial" device.
Right click and choose select update driver.
select "browse my computer for drivers" and then choose "Let me pick the drivers to install".
zachol said:
Try updating your Samsung drivers to the most recent ones:
http://forum.xda-developers.com/showthread.php?p=11633550#post11633550
Click to expand...
Click to collapse
Thanks so much . This fixed my issue on Win8 x64 with Hemdal and Epic 4g
micromax a71
micromax a71 driver gadget serial error how to solve
I want to flash my Q mobile i6 metal one but when I connect to computer and it has yellow icon too and it not working.... do I flash if gadget serial drive not work properly ??? How to flash Qmobile i6 metal one

[Q] Windows XP cant see Galaxy 10.1 as a device

Hi all
I have installed Kies and the USB driver from the Samsung site. When i connect my tablet Win XP pings and says hardward found etc, but then the ping sounds again and i get MTP device error detected. The drive does not show up in My Computer Ive tried several drivers from google and none have worked. Tried the install driver option in Kies and same result. I get the yellow icon in device manager saying MTP driver not found. Its very annoying...
Ive read that XP cant support high power devices and patch is being worked on. But wanted to check if anyone knows whats wrong and has a solution please?
Go to samsung website.
Download the Samusung Kies and install it (it includes samsung device usb drivers)
once this is installed you can connect the Tab and it will be recognized as a phone with a USB storage.
http://www.samsung.com/us/support/downloads/GT-P7510MAVXAB
go to the software.
and download the Kies for windows.
If that still does not work try downloading the actual total Samsung USB driver installation file found here
"http://down.kr.samsungmobile.com/uploadimg/service/support/download/anycall/sw/SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Please use the Q&A Forum for questions Thanks
Moving to Q&A

[Q] Unable to connect Galaxy Tab 10.1 to Windows 7 or OSX

I have been attempting to connect my Galaxy Tab 10.1 to a Windows 7 (64 bit) PC and an OSX (Snow Leopard) Mac Mini to no avail.
I have downloaded every driver I could possibly find, uninstall, restart, install driver, restart and still nothing. I attempted two versions of Kies, even installing the driver through Kies. I have updated the galaxy tab using the August 5th OTA (United States) update but it still refuses to work.
Does anyone have suggestions?
Here try this: http://www.samsung.com/us/support/downloads/GT-P7510MAYXAB
It will provide download links for Kies 2.0 and the proper drivers for both mac and pc. Just click on where it says "software" right next to "manuals" on the website.
Danstek said:
Here try this:
It will provide download links for Kies 2.0 and the proper drivers for both mac and pc. Just click on where it says "software" right next to "manuals" on the website.
Click to expand...
Click to collapse
This is where I have been downloading the software + drivers.
I also tried uninstalling all AntiVirus programs. I also tried seeing if I could push to device in Eclipse, but no-go.
After spending some time with Samsung Customer Service, they decided to let me send it in for repair. They provide the shipping label (UPS), so I guess it's not that bad.
I'm using Win 7 64 bit and I can't seem to connect via Kies either, I've installed version 2 and the usb drivers and when I plug the Tab in via USB it pops up a 'usb debugging' message.
Surely this is just a software issue and shouldn't require the tab to be sent back to Samsung?
Edit:
I've just got it working, disable USB debugging did the trick. Info found here http://androidforums.com/samsung-galaxy-tab-10-1/373613-galaxy-tab-10-1-cant-connect-kies.html
Any way to use Usb mass storage on a Mac? I can adb push, and use kies, but no USB mass storage.

[Q] Connection Error with Kies_2.0.3.11082_152_2

Hi guys! A new problem has started today with the latest version of Kies (Kies_2.0.3.11082_152_2). It fails to connect with the phone and shows the error, "cannot start service on this device. Pls disconnect and reconnect the device". What does this mean? Have tried everything. From re-installing Kies to re-installing device drivers using the Connection Error Resolution thing in the Tools menu of Kies. It was connecting fine till yesterday.
My laptop has Windows 7 Home Premium which is fully updated. And my phone is CF Rooted KF3 with Stock Kernel. Does anyone know what's wrong?
Windows is not starting the service Kies .
Go to your Windows services manager and check .
jje
JJEgan said:
Windows is not starting the service Kies .
Go to your Windows services manager and check .
jje
Click to expand...
Click to collapse
Hi JJ, I opened "Services" in windows, and in the list of Services, there is no service with the name KIES or Samsung Kies. Can you pls give a detailed answer. Thanks in advance.
Point to be noted is that this new version of Kies was working fine till yesterday, only from today it is not connecting the phone. When I un-install and re-install Kies, it connects properly and detects the phone (when connected via USB cable) just ONCE. After that whenever I try to connect the phone Kies is giving the error message. Also note, that I am able to view the contents of the phone normally via Windows.
Does anyone have the answer to this problem??? This problem of Kies not recognizing the phone when connected is being faced by many people. Has Kies stopped recognizing rooted phones???
My newly purchase from carrier also can't connect to pc. (xp )fail to find any driver when connect, namely those cdc serial and android mtp

Problem installing drivers on device (mskips toolkit)

So I'm brand new to the android world (AT&T i747) and am getting ready to root my S3 with mskip's toolkit but I'm having a little bit of a problem. My work computer is running windows xp. I've downloaded the tookit, i've ran and installed the drivers but when I plug my phone in, the computer recognizes it but then get this message:
"There was a problem installing this hardware: Samsung Mobile MTP Device. An Error occurred during the installation of the device. The required section was not found in the INF."
I saw the note where to uninstall Kies. I uninstalled the updates but is there a way to uninstall it all together or did I do it right?
I've rebooted PC. I've rebooted phone.
TIA
You're in the wrong forum and probably as a consequence used the wrong tool.
This is for i9300 not i747

Categories

Resources