This is kind of different from random reboots, because no matter what I am doing on the device or if its ideal, it does reboot around every 3 minutes.
Current version is 4.0.4 and the model of the device is Verizon xt912
System version: 6.16.211.xt912.Verizon.en.US
Kernel version: wt-3.0.0
Build no.: 6.7.2-180 ....
Build date: Jun 14, .... 2012
Another thing is, under the settings, the device is showing Baseband and IMEI - Unknown. Don't know what may have caused this. BTW, currently I am out of country (US) and I have no SIM inserted in the slot (for international GSM), I don't suppose inserting no SIM can lead to base band and IMEI = unknown?
I am no idea if this Unknow Baseband and IMEI is causing the reboot or vice-versa or if there's dependence.
What I have tried:
Wiping Cache through recovery
Reset to factory settings
Option 1 of Matt's Razr Utility 1.82
If anyone can tell me how can I make this phone usable, I would be thankful.
Did you try flashing official FXZ using RSD lite ?!
Sent from my DROID RAZR using Tapatalk 2
ryan8r said:
Did you try flashing official FXZ using RSD lite ?!
Sent from my DROID RAZR using Tapatalk 2
Click to expand...
Click to collapse
Not really, but would it be any different than restoring to ICS .211 using Matt's Razr Utility?
Can you tell me where I can find the official FXZ for Razr to flash?
It will be different cause stock fxz includes every part of the firmware while matts utility can only install certain parts of it like the system, boot etc.
The RSD simply doesn't detect the device. USB drivers are installed and gets detected fine with Matt's Razr Utility.
Tried different RSD versions. I also tried replacing all the radio, system, boot img and all other files in the Matt's Razr Utility with the FXZ which I was trying to restore back to. It said it did successfully flashed to 211 but the problem is still there.
I think if there's any way to change the base band from Unknown to the original, this problem can be corrected. Any ideas for this?
I cant say why RSD wont detect your device but "Baseband unknown" could be a Bad ESN or a blocked device and a corrupt PDS partition in the worst case..
That said if you do have any of the above your CDMA.XX.XXX baseband is most probably useless what you could try is to get your device to switch to a GSM baseband N.01.XXX and make use of the device with any operational GSM service in your country.
In order to do that root your device install Safestrap and flash any of the GSM roms available.
Try that and tell me the results.
Sent from my DROID RAZR using Tapatalk 2
^
I'll try that and let you know.
While trying to get it to work, I cannot find the EFS folder. I am using Android Commander on PC to browse the files and folders of the device. Its right at the very root, i.e at the location " / " right? Where there are folders like Sys, System, Root, preinstall, preoc etc
You've installed motorola usb drivers,
When the phone is powered off, hold both VOLUME UP + DOWN buttons and press POWER button. You'll get into bootmenu. Release the buttons and navigate with VOLUME DOWN to AP FASTBOOT mode, press VOLUME UP to get into AP FASTBOOT MODE. Connect the phone to pc, launch RSD Lite ( newest version 6.1.4 )
If it detects the phone, flash stock xt912 ics rom.
Semseddin said:
You've installed motorola usb drivers,
When the phone is powered off, hold both VOLUME UP + DOWN buttons and press POWER button. You'll get into bootmenu. Release the buttons and navigate with VOLUME DOWN to AP FASTBOOT mode, press VOLUME UP to get into AP FASTBOOT MODE. Connect the phone to pc, launch RSD Lite ( newest version 6.1.4 )
If it detects the phone, flash stock xt912 ics rom.
Click to expand...
Click to collapse
I don't know why but the RSD lite does not detect the phone. USB drivers are installed and working fine because matt's razr utility detects the phone (before it wasn't).
You may need to run RSD Lite as Administrator for it to work on Win 7/8.
You need to get it to successfully complete flashing the radios in recovery after it finishes the other partitions.
It should reboot into recovery by itself and flash the BP.img and LTE.img and then reboot again normally after it has completed.
That should fix the Baseband unknown and blank IMEI issue.
cellzealot said:
You may need to run RSD Lite as Administrator for it to work on Win 7/8.
You need to get it to successfully complete flashing the radios in recovery after it finishes the other partitions.
It should reboot into recovery by itself and flash the BP.img and LTE.img and then reboot again normally after it has completed.
That should fix the Baseband unknown and blank IMEI issue.
Click to expand...
Click to collapse
I am on Win 7 64 bit.
Running as Admin, but still RSD Lite does not show the device. Is there anything else that I can try?
I'll also try running on a different PC.
http://db.tt/EMFh9jos
That is RSD Lite 6.1.4 the latest available version. Try it and see if you have any better results.
Can you use ADB ?!
And Did you try any of the GSM roms ?!
Accidentally Sent from my iPhone using Tapatalk
cellzealot said:
http://db.tt/EMFh9jos
That is RSD Lite 6.1.4 the latest available version. Try it and see if you have any better results.
Click to expand...
Click to collapse
I am using 6.1.4 and have also tried 5.9. Anything else that I can try?
ryan8r said:
Can you use ADB ?!
And Did you try any of the GSM roms ?!
Accidentally Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
No. I think I'll try that.
I am uploading a zip file that is just the radio_update_211_RAZR.zip in the radio.img from the 211 FXZ.
You will need to put the file on the root of your sdcard. Since the phone isn't booting, the easiest way is to take out the sdcard and put it in a card reader on your PC to transfer the file. Then reinsert the sdcard in your phone and reboot the phone holding Vol up and down + PWR to get to the boot menu and select recovery.
The phone will boot to M logo and then blank screen briefly and then show the stock recovery with Android and red Exclamation !. Press both Vol up and down at the same time to enter recovery and chose Apply Update from External Storage option and browse to the update_radio_211_RAZR.zip and select it.
It should load lte.img and bp.img and then reboot automatically.
This should allow the phone to boot normally and display the baseband and IMEI again if everything works as described.
https://dl.dropbox.com/u/7632904/update_radio_211_RAZR.zip
This will avoid the need for RSD Lite if it works. If not, then you can try using fastboot to manually flash the images from the FXZ.
press all three bttn,on black and white menu scroll down and select "BP HW Diag & Boot AP" boot will boot up ,see if phone restarts on its on or not and lemme know ...
cellzealot said:
I am uploading a zip file that is just the radio_update_211_RAZR.zip in the radio.img from the 211 FXZ.
You will need to put the file on the root of your sdcard. Since the phone isn't booting, the easiest way is to take out the sdcard and put it in a card reader on your PC to transfer the file. Then reinsert the sdcard in your phone and reboot the phone holding Vol up and down + PWR to get to the boot menu and select recovery.
The phone will boot to M logo and then blank screen briefly and then show the stock recovery with Android and red Exclamation !. Press both Vol up and down at the same time to enter recovery and chose Apply Update from External Storage option and browse to the update_radio_211_RAZR.zip and select it.
It should load lte.img and bp.img and then reboot automatically.
This should allow the phone to boot normally and display the baseband and IMEI again if everything works as described.
https://dl.dropbox.com/u/7632904/update_radio_211_RAZR.zip
This will avoid the need for RSD Lite if it works. If not, then you can try using fastboot to manually flash the images from the FXZ.
Click to expand...
Click to collapse
ii m having exact same problem as listed by op , i tired flashing this zip file following error came up on screen
assert failed: motorola.motoflash(" /tmp/bp.img")
E:error in /tmp/sideload/package.zip
(status 7)
Installation aborted.
cellzealot said:
I am uploading a zip file that is just the radio_update_211_RAZR.zip in the radio.img from the 211 FXZ.
You will need to put the file on the root of your sdcard. Since the phone isn't booting, the easiest way is to take out the sdcard and put it in a card reader on your PC to transfer the file. Then reinsert the sdcard in your phone and reboot the phone holding Vol up and down + PWR to get to the boot menu and select recovery.
The phone will boot to M logo and then blank screen briefly and then show the stock recovery with Android and red Exclamation !. Press both Vol up and down at the same time to enter recovery and chose Apply Update from External Storage option and browse to the update_radio_211_RAZR.zip and select it.
It should load lte.img and bp.img and then reboot automatically.
This should allow the phone to boot normally and display the baseband and IMEI again if everything works as described.
https://dl.dropbox.com/u/7632904/update_radio_211_RAZR.zip
This will avoid the need for RSD Lite if it works. If not, then you can try using fastboot to manually flash the images from the FXZ.
Click to expand...
Click to collapse
It says, Finding, Opening, Verifying, Installing update....
assert failed: motorola.motoflash("/tmp/bp.img")
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.
BTW, I tried this when being on 215.
Should I go to 211 and then try again?
karansawhney said:
press all three bttn,on black and white menu scroll down and select "BP HW Diag & Boot AP" boot will boot up ,see if phone restarts on its on or not and lemme know ...
Click to expand...
Click to collapse
In BP HW Diag & Boot AP, it does not reboot on its own.
lamborg said:
It says, Finding, Opening, Verifying, Installing update....
assert failed: motorola.motoflash("/tmp/bp.img")
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.
BTW, I tried this when being on 215.
Should I go to 211 and then try again?
In BP HW Diag & Boot AP, it does not reboot on its own.
Click to expand...
Click to collapse
so both of us are in a same boat my phone acts the same and if i use matts utility i file gets created everytime in my phones internal storage named "update_radio.zip.failure"
If you're using BMM or SAFESTRAP 3.10 with stock ROM flashing enabled I can make you a flashable patch that will allow GSM services to work on the stock ROM itself !?
I'm only trying to help cause I've owned 2 RAZR's previously with the same condition. As I stated earlier if a radio flash or FXZ doesn't fix it then it is a corrupt PDS partition and it cannot be fixed to work on the CDMA baseband.
Sent from my DROID RAZR using Tapatalk 2
Related
just format the system from recovery, and does not start need help urgent!
someone know I can do?
what the phone do if you push these boutons :
Volume UP + Volume Down + Power . hold 5 sec ?
he boot or do nothing ?
Assuming you have an X912 (VZW CDMA RAZR)?
Download the fastboot files here
Download and install RSD Lite Here
Download and install Moto Drivers here
If you hold all 3 buttons on the side of the phone it should force a reboot and it'll kick you into the moto recovery bootloader. Select AP Fastboot.
For instructions on using RSD use the interwebz. Too much for me to type out.
Flash the recovery file via RSD.
That will return it back to factory (ver .744). You should get an update notification but if you want to pull it you can do that too.
when I try to flash with rds device settings are clean, and gives me error, any help?
cygnus56 said:
when I try to flash with rds device settings are clean, and gives me error, any help?
Click to expand...
Click to collapse
I told you. I'm lazy. Google knows.
http://www.droidforums.net/forum/dr...-using-rsd-lite-flash-sbf-file-correctly.html
thank you very much
cygnus56 said:
when I try to flash with rds device settings are clean, and gives me error, any help?
Click to expand...
Click to collapse
Which mode are you selecting when you boot the phone? Fastboot or something else?
fastboot and show me this https://motorola-global-eng.custhelp.com/rnt/rnw/img/enduser/spdrmain22.png
then start flashing and I get an error because I do not show any value as the imei
http://imageshack.us/photo/my-images/812/rsdlite3.png
in device properties only show me N/A... please i need help, this mobile is new!!!
It's not seeing a USB connection
Sent from my DROID RAZR using xda premium
Do not post questions in development forums
As question =) i would like to flash my phone back to stock until ics arrive but i dont know how to do it. Can someone give me a full tutorial?
I m using asia gsm razr xt910, thx
Maybe use this file and flash like you would any Rom?
Well if you find out your ROM region, then you can go download the appropriate ROM in the official ROM thread in the development section and use RSD lite to flash it back to factory ROM. That should work and your phone will be good as new.
http://forum.xda-developers.com/showthread.php?t=1416058
http://forum.xda-developers.com/showthread.php?t=1362956
What is rsd lite and how do i use it? I m noob in this ..
N how do i check my rom region? I m in the arctic now, n when i check my system info, i shows thst my system version is 651.167.20.xt910.retail.en.EU
So what should i do?million thanks to anyone who help me
Ive never done it myself but Im assuming region is the country your living in as some are gsm and some cdma.
On using rsd lite there are several how to with search.
http://www.blogotechblog.com/2011/12/restore-motorola-droid-razr-to-stock-configuration/
Got this from here.
INSTRUCTIONS:
1. If you haven't already done so in the past, download and install the motorola usb drivers.
2. Download and install RSD Lite 5.6.
NOTE: In order for RSD Lite to recognize your phone, it has to be in AP Fastboot mode or it can just be booted up like normal. If your phone will not boot up, then power it off and put it into AP Fastboot mode by holding the volume up + down + power. Then select the AP Fastboot option.
3. Connect your phone to the computer with a usb cable and open RSD Lite. Make sure RSD Lite recognizes your phone before proceeding.
WARNING: Be careful not to move your phone around or mess with the usb cable while doing the following steps. You don't want to accidentally disconnect it. That might end up bad.
4. In RSD Lite, select the fastboot zip file you downloaded then press the "Uncompress and Start Flashing" button. RSD Lite will unzip the file and begin flashing.
5. Once the flashing is done and your phone is booted up, perform a factory reset to complete the process
http://www.razrforums.com/forum/droid-razr-development/775-rsd-lite-fastboot-not-working.html
http://forum.xda-developers.com/showthread.php?t=1486718&highlight=droid+razr+utility
Thanks! Will try that once i free
Do i need to factory reset b4 do this?
omnia1994 said:
Thanks! Will try that once i free
Do i need to factory reset b4 do this?
Click to expand...
Click to collapse
Dont think so because as with my other phones when I restored it automatically wiped the phone.
Ok. Will report once i tried! Many thx for everyone!
Back to stock successfully . Thx!
I followed the steps shown by blueis300
After connecting the device in APFastoot mode I started RSD lite it recognized my device.
Then I selected the zip file and selected the Uncompress and flash option
After Uncompressing the flashing process starts and when it reaches 6/18 it fails.
Please Help!!
any infomation about y it failed?
As soon as it enters step 6 it fails. I have no idea why its failing.
Please Help otherwise i'll be stuck with this stupid ROM
I live in India so is there any problem with the region or something??
r u sure u downloaded the correct rom?
I Got it!!!
So I have been trying a bunch of different roms for the RAZR today and I was having problems with the keyboard not working. I decided to try to load CM9, so I read I need to use "safestrap" and not "bootstrap" that I had been using. I downloaded it, installed then tried to boot into recovery and load CM9.
Now the safestrap boot screen appears and says "safe system disabled" "hit search to continue / hit the menu button to boot into recovery" if I hit the menu button it just reboots, if I hit search the screen just goes blank and I have to do a reset to get it to start the process again.
I have RSD but I have never used it before. I have my phone plugged into my computer but my computer doesnt see it.
Help!
dreamsti said:
So I have been trying a bunch of different roms for the RAZR today and I was having problems with the keyboard not working. I decided to try to load CM9, so I read I need to use "safestrap" and not "bootstrap" that I had been using. I downloaded it, installed then tried to boot into recovery and load CM9.
Now the safestrap boot screen appears and says "safe system disabled" "hit search to continue / hit the menu button to boot into recovery" if I hit the menu button it just reboots, if I hit search the screen just goes blank and I have to do a reset to get it to start the process again.
I have RSD but I have never used it before. I have my phone plugged into my computer but my computer doesnt see it.
Help!
Click to expand...
Click to collapse
Whats your razr. Its verizon? If not you should use bootstrap.
Safestrap is for verizon razr. But some uses bootstrap on it.
You have to put ur razr in ap fastboot mode: power+vol up+vol down in order to flash with rsd lite
Choose a stock rom to your razr and flash it. Make sure flash correct rom
Cheers
Sent from my XT910 using Tapatalk 2
I have the Verizon RAZR.
So my computer does not recognize the phone when in AP Fastboot, but it does recognize it when its in BP SDF flash. What am I doing wrong?
dreamsti said:
I have the Verizon RAZR.
So my computer does not recognize the phone when in AP Fastboot, but it does recognize it when its in BP SDF flash. What am I doing wrong?
Click to expand...
Click to collapse
Uninstall all motorola software, reinstall motocast 1.29 or newer then connect ur razr.
Use rsd lite 5.7 and make sure you got correct sbf file
You may have corrupted drivers.
Cheers
Cheers
Enviado de meu XT910 usando o Tapatalk 2
Do I need to install anything else other than those 2 things? It still doesnt work.
Would having Samsung drivers effect anything? I have a Galaxy Nexus too.
dreamsti said:
Would having Samsung drivers effect anything? I have a Galaxy Nexus too.
Click to expand...
Click to collapse
Sometimes it brokes motorola drivers. Doing what I said should work.
Edit:
BTW what's the version you were and what's the version you're trying to flash?
Some versions cannot downgrade when the one you're trying to flash have a lower security.
I was running Gummy when everything went wrong. Loading safestrap is when I started having the current problems.
I uninstalled the Samsung drivers, and loaded both RSDLite 5.7 and the Moto driver you suggested and RSD will not see my phone in AP Fastboot, but it will when in BP SDF flash. Very confusing.
I will load the latest version of GB when I can get my computer to see my phone in AP Fastboot.
Now my computer is trying to install the flash MZ600 driver and error's out. I googled MZ600 and it says its a Xoom driver???
dreamsti said:
Now my computer is trying to install the flash MZ600 driver and error's out. I googled MZ600 and it says its a Xoom driver???
Click to expand...
Click to collapse
Yup. You've a driver problem, better unistall others devices you may have.
Or, do it in other pc, like a notebook.
So I finally got the drivers working and now RSD see's my phone when in AP Fastboot, but I get an error when flashing the file. This is the error I get.
"Failed flashing process. 22/23 flash "radio.img" -> Phone returned FAIL."
It was flashing for about 5 minutes before I got this error.
Edit: I'm using the file from this thread.
http://rootzwiki.com/topic/13566-droid-razr-fastboot-file/
Blur_Version.6.12.173.XT912.Verizon.en.US
I think the battery went dead, ugh. Ill recharge and report back.
Ok so apparently I flashed a the kitchen sink rom and when phone booted up it stop and said fail to boot 2 but I flashed the and files in the video from qbking77 and now it says fail to boot 4 can anybody help me please. It the only phone I got and I'm not available for an upgrade till february
Robert5686 said:
Ok so apparently I flashed a the kitchen sink rom and when phone booted up it stop and said fail to boot 2 but I flashed the and files in the video from qbking77 and now it says fail to boot 4 can anybody help me please. It the only phone I got and I'm not available for an upgrade till february
Click to expand...
Click to collapse
What version soft ware did you start with.
the android version ? i was running on 2.3.5 it first said fail to boot 2 and thn after i flashed the sbf file it went to boot 4 do u know how i can fix this
Robert5686 said:
the android version ? i was running on 2.3.5 it first said fail to boot 2 and thn after i flashed the sbf file it went to boot 4 do u know how i can fix this
Click to expand...
Click to collapse
You can't flash custom ROMs with a locked bootloader
Sent from my MB855 using xda app-developers app
Yeah i didnt know that but idk y does the bootloader have to be unlocked cuz i flashed the beats audio one and didnt do this
What sbf did you flash?
Sent from my MB855 using xda app-developers app
mof9336 said:
What sbf did you flash?
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Also having the same issue, I just got root, and I tried to install Jellybean from Jokersax with my battery at 5% which was dumb, but anyways now I get failed to boot 4, I can get it into fastboot protocol support, or rsd mode, and that's it, I've tried to flash some stock files, but no good, I also have a locked bootloader & am on 2.3.5
i flashed the one from qbking77 video i only flashed the one and my batery was drained cuz it wasnt full but the proccess said succes but it went to fail to boot 4 and now it says battery to low to flash but i can get a new battery real quick i jux need to know wat sbf file to flash do u know any that i can flash and would work like i said its the only phone i have and im not available for an upgrade till later and i need my phone
Failed to boot 4 Starting RSD Mode
The Story:
I started having issues with the phone becoming slower and slower and crash prone so i figured this would be a good time to flash an alternate rom. I have had root for some time and i unlocked the boot loader probably about two weeks ago. I had tried a few roms by Th3Bill and i kept having issues so i thought id try to re-lock the boot loader as i couldn't flash any of his roms even with is recovery in place to see if unlocking it again would solve my issue. Also i was running 2.3.4 NOT 2.3.5 so it wasn't due to that.
I just followed the steps outlined here from Link:
Relocking without Full SBF flash
Factory reset phone Menu/Settings/Privacy/Factory Data Reset DO NOT SKIP THIS STEP
Reboot phone into fastboot mode: VOL down/Power. Use VOL down to scroll though options til you see "fastboot" then VOL up to enable. and connect phone to computer
Open command prompt in the moto-fastboot folder and type the following using the <enter> key after each command:
moto-fastboot devices
moto-fastboot erase recovery
moto-fastboot flash recovery stock_recovery.smg
moto-fastboot reboot
Disconnect phone from computer
Start RSD Lite on your computer
Reboot phone into RSD mode: VOL down/Power. Use VOL down to scroll though options til you see "RSD" then VOL up to enable.
Connect phone to computer.
Flash nopudding4u.sbf.
Close RSD Lite and disconnect phone.
Reboot phone
Once i completed the Flash nopuding4u.sbf step it failed giving the status: "Failed flashing process. Failed Flashing process. Phone[0000]: THe "Secure_Motorola_Flash" Interface could not be found. The super-file is secure and for re-flash; the phone needs a super-file that is not secureand not for reflash. (0x7066);Phone connec"
It is not just booting to the first Motorola Dual Core Technology splash screen and showing:
Failed to boot 4
Starting RSD Mode
I've been looking for a solution to the issue for about 30 minutes and have found nothing helpful.
Nopudding4u.sbf relocks your phone, however I would recommend using the 198_7.sbf file instead. U can still unlock with pudding.sbf but you will be able to get back running.. after u flash the stock sbf u will probably need to go into recovery and do a factory reset.
Sent from my MB855 using xda app-developers app
Did you fix,
Tempest_Inc said:
The Story:
I started having issues with the phone becoming slower and slower and crash prone so i figured this would be a good time to flash an alternate rom. I have had root for some time and i unlocked the boot loader probably about two weeks ago. I had tried a few roms by Th3Bill and i kept having issues so i thought id try to re-lock the boot loader as i couldn't flash any of his roms even with is recovery in place to see if unlocking it again would solve my issue. Also i was running 2.3.4 NOT 2.3.5 so it wasn't due to that.
I just followed the steps outlined here from Link:
Relocking without Full SBF flash
Factory reset phone Menu/Settings/Privacy/Factory Data Reset DO NOT SKIP THIS STEP
Reboot phone into fastboot mode: VOL down/Power. Use VOL down to scroll though options til you see "fastboot" then VOL up to enable. and connect phone to computer
Open command prompt in the moto-fastboot folder and type the following using the <enter> key after each command:
moto-fastboot devices
moto-fastboot erase recovery
moto-fastboot flash recovery stock_recovery.smg
moto-fastboot reboot
Disconnect phone from computer
Start RSD Lite on your computer
Reboot phone into RSD mode: VOL down/Power. Use VOL down to scroll though options til you see "RSD" then VOL up to enable.
Connect phone to computer.
Flash nopudding4u.sbf.
Close RSD Lite and disconnect phone.
Reboot phone
Once i completed the Flash nopuding4u.sbf step it failed giving the status: "Failed flashing process. Failed Flashing process. Phone[0000]: THe "Secure_Motorola_Flash" Interface could not be found. The super-file is secure and for re-flash; the phone needs a super-file that is not secureand not for reflash. (0x7066);Phone connec"
It is not just booting to the first Motorola Dual Core Technology splash screen and showing:
Failed to boot 4
Starting RSD Mode
I've been looking for a solution to the issue for about 30 minutes and have found nothing helpful.
Click to expand...
Click to collapse
Hello, did you fix your phone. i am in the same issue now.. please guide me or help me to fix the phone.I have been trying for 3 days,, thanks.
Tried to flash MIUI without unlocking the bootloader
keljoe2804 said:
Also having the same issue, I just got root, and I tried to install Jellybean from Jokersax with my battery at 5% which was dumb, but anyways now I get failed to boot 4, I can get it into fastboot protocol support, or rsd mode, and that's it, I've tried to flash some stock files, but no good, I also have a locked bootloader & am on 2.3.5
Click to expand...
Click to collapse
It is was initially stuck on failed to boot 2 and Starting RSD mode. Then I used RSD lite to flash the stock sbf, and my computer went to sleep in the middle of the flash and failed. Now it is stuck on Failed to boot 4, Starting RSD mode, Battery is too low to flash.
I am not in the US right now, so cannot take it to the Sprint store. PLEASE HELP!!!
I am having a problem. I was trying to upgrade to Jelly bean 4.1 on this Atrix 4g. I tried to go through the steps that it gave online with the CM10 n Cyro and all. Long story short it couldn't find the rom within the zip or something of that nature. In other words, it screwed me over. I can't get back into recovery. It's been giving me this error:
SVF 108:1:2
Failed to boot 3
Starting RSD mode
Before it was giving me just:
Failed to boot 4
Starting RSD mode
I had tried reseting to factory through the moto-fastboot but of course it failed. I have been tryin like crazy to flash various SBF from 2.3.5 to 2.3.6. I was originally at 2.3.6 but for what ever reason when I try the RSD lite it gives me the error after it executes "Phone did no re-enumerate after RAM downloader was sent". (0x703e). I have been reading forums literally all day. Perhaps I am not understanding something therefore I am missing it but maybe one of you guys could help me out with this? Maybe there is a real simple fix or maybe I completely ruined it? Either way it would be nice to get some help on this. Basically when I was trying to upgrade to 4.1 I followed "How to upgrade the Atrix 4G to Android 4.1.1 Jelly Bean via CyanogenMod 10" off of the androidauthority website. I got to step 9 but it couldn't find the ROM, by then it was too late.
UPDATE: So I got just that and RSD was flashing it until it reached yet another error:
failed flashing process. Failed flashing process. Phone[0000]: error switching phone BP pass through mode (0x70BE); phone disconnected.
Help?
majorrazer said:
Help?
Click to expand...
Click to collapse
I'm no expert, you can wait for an expert response but what i couldnt understand is why you try to flash a SBF. The manual you refer to is a CWM based installation, with a zip file, not a SBF.
So do you have CWM recovery flashed? Do you have the related zip file downloaded to sdcard?
saldirai said:
I'm no expert, you can wait for an expert response but what i couldnt understand is why you try to flash a SBF. The manual you refer to is a CWM based installation, with a zip file, not a SBF.
So do you have CWM recovery flashed? Do you have the related zip file downloaded to sdcard?
Click to expand...
Click to collapse
I don't have anything flashed at the moment. I can't boot into anything at the moment. I am confused perhaps with what will solve my problem.
majorrazer said:
I don't have anything flashed at the moment. I can't boot into anything at the moment. I am confused perhaps with what will solve my problem.
Click to expand...
Click to collapse
Do you have an unlocked bootloader? Does the word "Unlocked" appear when you power the phone on? You must have an unlocked bootloader for sure. IF not, you must unlock it.
his is the guide you were following;
http://www.androidauthority.com/atrix-4g-mb860-android-4-1-1-jelly-bean-cyanogenmod-10-cm10-106639/
As said there, it requires unlocked, rooted Atrix with with ClockworkMod Recovery installed
I guess you can still unlock the bootloader and install cwm recovery. Just search and find instructions.
HEY
i have the same problem also.... and the same error...
is your phone fix already?
could you tell me how?
SVF: 108:failed to boot 3 starting RSD mode
Hi,
I have Atrix 4G AT&T, last night rooted it and from recovery mode install custom rom cm-7.2.0-olympus after reboot its not booted and showing "SVF: 108:failed to boot 3 starting RSD mode". Removing battery also not solve this problem, Andriod recovery mode also not working by pressing down volume key on restarting. RSD Lite procedure also not working for my phone. RSD Lite 5.6 or other versions (i tried most of all) also not deducted my phone when i connected to PC in Fastboot mode. I m new and have not to much information about software version of this Motorola Atrix 4G but before its bricking mode it was on Gingerbread 2.3.6.
I have also tried "cmd prompt" stock frame version and other procedures but all failed to start my Phone to normal.
salimdawar said:
Hi,
I have Atrix 4G AT&T, last night rooted it and from recovery mode install custom rom cm-7.2.0-olympus after reboot its not booted and showing "SVF: 108:failed to boot 3 starting RSD mode". Removing battery also not solve this problem, Andriod recovery mode also not working by pressing down volume key on restarting. RSD Lite procedure also not working for my phone. RSD Lite 5.6 or other versions (i tried most of all) also not deducted my phone when i connected to PC in Fastboot mode. I m new and have not to much information about software version of this Motorola Atrix 4G but before its bricking mode it was on Gingerbread 2.3.6.
I have also tried "cmd prompt" stock frame version and other procedures but all failed to start my Phone to normal.
Click to expand...
Click to collapse
Did you unlock the bootloader the right way?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Did you unlock the bootloader the right way?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Not fully under stand "unlock bootloader" the right way? As mention earlier i m not an expert or more knowledge about Rooting and hacking of Andriod Phones, Please tell me in Details, thanks
salimdawar said:
Not fully under stand "unlock bootloader" the right way? As mention earlier i m not an expert or more knowledge about Rooting and hacking of Andriod Phones, Please tell me in Details, thanks
Click to expand...
Click to collapse
did you flash pudding sbf via rsd and use fastboot to oem unlock?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
did you flash pudding sbf via rsd and use fastboot to oem unlock?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
No i didnt use RSD methode because RSD Lite not deducting my Phone, tried different versions of RSD for flash pudding, I have Windows 8-64bit.
Also Flash the Mobile throw following procedure
Boot the Atrix into “Fastboot Mode” (hold power + vol down)
plug your Atrix into your PC via USB
Navigate to your fastboot folder via command prompt
type “moto-fastboot flash boot boot.img” press enter
type “moto-fastboot flash system system.img” press enter
type “moto-fastboot -w” press enter
type “moto-fastboot reboot” press enter.
But it also not Boot my phone in normal, Its stuck in Start menu,
SVF 108:1:2
Failed to boot 3
Starting RSD mode
salimdawar said:
No i didnt use RSD methode because RSD Lite not deducting my Phone, tried different versions of RSD for flash pudding, I have Windows 8-64bit.
Also Flash the Mobile throw following procedure
Boot the Atrix into “Fastboot Mode” (hold power + vol down)
plug your Atrix into your PC via USB
Navigate to your fastboot folder via command prompt
type “moto-fastboot flash boot boot.img” press enter
type “moto-fastboot flash system system.img” press enter
type “moto-fastboot -w” press enter
type “moto-fastboot reboot” press enter.
But it also not Boot my phone in normal, Its stuck in Start menu,
SVF 108:1:2
Failed to boot 3
Starting RSD mode
Click to expand...
Click to collapse
ok so its telling you what to do. Since you haven't flashed a sbf, chances are you are not unlocked, so how do you expect to flash anything on a locked device?
Did you install motorola device manager for the drives?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
ok so its telling you what to do. Since you haven't flashed a sbf, chances are you are not unlocked, so how do you expect to flash anything on a locked device?
Did you install motorola device manager for the drives?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Yes already install this file from Net
"Motorola_End_User_Driver_Installation_5.1.0_64bit "
and not expect any thing else about flashing of my device.
Before Motorola Atrix 4G, i were used in passed Samsung S1, S2, S3, & T989 (T-Mobile S2 version). All these andriod sets were very easily hack or Root and can install Roms easily .
But Moto Atrix 4G can me upset and sad.
kindly help me to re-connect my self to the andriod world by this Motorola Atrix 4G, thanks
Hey guys I'm having trouble getting to RSS mode my phone comes on then it says entering nv flash recovery mode then the phone dies so I need help trying to get into my phone to flash the sbf file
Sent from my GT-N7105 using XDA Premium 4 mobile app
Need Help regarding Motorola Atrix Mb 861.
salimdawar said:
No i didnt use RSD methode because RSD Lite not deducting my Phone, tried different versions of RSD for flash pudding, I have Windows 8-64bit.
Also Flash the Mobile throw following procedure
Boot the Atrix into “Fastboot Mode” (hold power + vol down)
plug your Atrix into your PC via USB
Navigate to your fastboot folder via command prompt
type “moto-fastboot flash boot boot.img” press enter
type “moto-fastboot flash system system.img” press enter
type “moto-fastboot -w” press enter
type “moto-fastboot reboot” press enter.
But it also not Boot my phone in normal, Its stuck in Start menu,
SVF 108:1:2
Failed to boot 3
Starting RSD mode
Click to expand...
Click to collapse
I need your help regarding Motorola Atrix Mb 861. My phone is not boot and show..
SVF: 108:1:2, Failed to boot 3
Starting RSD mode.
also not able to hard reset. My phone detail are.
My model is KT Atrix MB861
Not sure which is the build number
s/w version: 4.5.2A-KT-75
Android version: 2.3.4
Kernel version: 2.6.32.9-00001...
Please Help regarding that matter.....
kamal.navigator said:
I need your help regarding Motorola Atrix Mb 861. My phone is not boot and show..
SVF: 108:1:2, Failed to boot 3
Starting RSD mode.
also not able to hard reset. My phone detail are.
My model is KT Atrix MB861
Not sure which is the build number
s/w version: 4.5.2A-KT-75
Android version: 2.3.4
Kernel version: 2.6.32.9-00001...
Please Help regarding that matter.....
Click to expand...
Click to collapse
Were you bootloader unlocked before getting this message?