I made a factory reset, and after that, I get the message: "tw launcher has stopped" and I can´t do anything.
I´ve the NEAK Kernel CWM Recovery v5.5.0.4.
I´ve searched for the solution but I can´t find the answer...
Thank you!
There's a neak kernel available on the i777?
Sent from my Galaxy Nexus
Pirateghost said:
There's a neak kernel available on the i777?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Well, I´m not pretty sure if NEAK is the Kernel´s name. In the recovery menu, says: N.E.A.K CWM Recovery v5.5.0.4.
Can I solve it installing another rom?
Pirateghost said:
There's a neak kernel available on the i777?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Yes, but not JB compatible.
Sent from my SGH-I777 using Tapatalk 2
dandrumheller said:
Yes, but not JB compatible.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Can I install that firmware? Is it compatible? May it fix the problem?
Nikouy said:
Can I install that firmware? Is it compatible? May it fix the problem?
Click to expand...
Click to collapse
Not with NEAK. Just flash the ROM you want and there will be a kernel packaged with the ROM
Related
after flashing I9100XWLPT coming from CM9 the phone block in the boot ,i see only the S and samsung galaxy SII!!
i did some thing wrong?
Wipe data.
przemcio510 said:
Wipe data.
Click to expand...
Click to collapse
dont work
Oh, then it seems to be more complicated. Have you tried to flash 4.0.3?
What process did you use to flash LPT?
Sent from my GT-I9100 using xda premium
m7amed said:
after flashing I9100XWLPT coming from CM9 the phone block in the boot ,i see only the S and samsung galaxy SII!!
i did some thing wrong?
Click to expand...
Click to collapse
Do a full wipe!!!
przemcio510 said:
Oh, then it seems to be more complicated. Have you tried to flash 4.0.3?
Click to expand...
Click to collapse
no i didn't tried it.
HANDSY said:
What process did you use to flash LPT?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
download mode,PDA,start.
Gercke said:
Do a full wipe!!!
Click to expand...
Click to collapse
i did it.
now i flashed siyah 4 and i installed CM9 from CWM and all ok now
but i want to use this rom i will try to flash it again
is it safe?
Yes LPT is safe I'm on a modified version of it right now. It's not the ROM but the kernal that is the problem with certain 4.0.4 leaked ROMs. If you use siyah as your kernel you will be safe.
Sent from my GT-I9100 using xda premium
I am trying to root my recently updated Bell mobility samsung galaxy S2 I9100 running ICS 4.0.3, Baseband version I9100MUGLD3, Kernel Version 3.0.15-I9100MUGLD3-CL377577, Build Version IML74K.UGLD3. I Can't Find anything on these threads. Can someone help? Thanks in advance.
Ethanp said:
I am trying to root my recently updated Bell mobility samsung galaxy S2 I9100 running ICS 4.0.3, Baseband version I9100MUGLD3, Kernel Version 3.0.15-I9100MUGLD3-CL377577, Build Version IML74K.UGLD3. I Can't Find anything on these threads. Can someone help? Thanks in advance.
Click to expand...
Click to collapse
check the link below
Universal Rooting Method for ICS
Sun90 said:
check the link below
Universal Rooting Method for ICS
Click to expand...
Click to collapse
Awesome the link worked great. But it turns out my phone tested positive to the Emmc brick. So i now i don't want to flash anything lol.
Ethanp said:
Awesome the link worked great. But it turns out my phone tested positive to the Emmc brick. So i now i don't want to flash anything lol.
Click to expand...
Click to collapse
You're device is fine. I have the same thing and I've flashed hundreds of times. You just have to know what you're flashing and understand the basics
Sent from my GT-I9100 using xda premium
kilometers4 said:
You're device is fine. I have the same thing and I've flashed hundreds of times. You just have to know what you're flashing and understand the basics
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I am familiar with flashing. I had the LG Optimus LTE before this and flashed quite a few roms, This phone however has me awfully confused. I have been researching all day. And so far i am under the understanding that the touch cwm are not good and the use the 4.0.1.5 recovery. But what i don't understand is how do you install roms without wiping data/factory reset through cwm? don't most roms require this? and isn't that what causes the superbrick? Sorry for sounding like a noob. but can you tell me how you do your flashing?
Ethanp said:
I am familiar with flashing. I had the LG Optimus LTE before this and flashed quite a few roms, This phone however has me awfully confused. I have been researching all day. And so far i am under the understanding that the touch cwm are not good and the use the 4.0.1.5 recovery. But what i don't understand is how do you install roms without wiping data/factory reset through cwm? don't most roms require this? and isn't that what causes the superbrick? Sorry for sounding like a noob. but can you tell me how you do your flashing?
Click to expand...
Click to collapse
Just use a different kernel, like siyah (www.gokhanmoral.com and make it's for the s2 not s3). Then you can wipe data. Just didn't not be on 4.0.4, and have a samsung based kernel (the kernel dev should have info in the op). Once you're on a safe kernel you can flash whatever you want and wipe data.
Sent from my GT-I9100 using xda premium
kilometers4 said:
Just use a different kernel, like siyah (www.gokhanmoral.com and make it's for the s2 not s3). Then you can wipe data. Just didn't not be on 4.0.4, and have a samsung based kernel (the kernel dev should have info in the op). Once you're on a safe kernel you can flash whatever you want and wipe data.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Ok so i flash the kernel via odin? because my phone doesn't have cmw installed. Siyah-s2-v4.0.1.tar that is the kernel i am about to flash. Is it safe for my phone? also do i need to do a backup of my stock kernel?
Ethanp said:
Ok so i flash the kernel via odin? because my phone doesn't have cmw installed. Siyah-s2-v4.0.1.tar that is the kernel i am about to flash. Is it safe for my phone? also do i need to do a backup of my stock kernel?
Click to expand...
Click to collapse
Yeah, you should be able to flash through Odin. And you can flash back to stock by getting a stock firmware from www.sammobile.com and flash through Odin
Sent from my GT-I9100 using xda premium
Ethanp said:
Awesome the link worked great. But it turns out my phone tested positive to the Emmc brick. So i now i don't want to flash anything lol.
Click to expand...
Click to collapse
How do you test for Emmc brick?
Sent from my iPad using Tapatalk HD
Spacemonkie4207 said:
How do you test for Emmc brick?
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
Go to this page, http://forum.xda-developers.com/showthread.php?t=1693704 and download and install the gotbrickbug apk
kilometers4 said:
Yeah, you should be able to flash through Odin. And you can flash back to stock by getting a stock firmware from www.sammobile.com and flash through Odin
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
So I did what you told me too. And went ahead and flashed a custom kernel (Siyah 4.0.1) and tried installing salman ics rom. and now i have a never ending boot loop.. any suggestions?
Ethanp said:
So I did what you told me too. And went ahead and flashed a custom kernel (Siyah 4.0.1) and tried installing salman ics rom. and now i have a never ending boot loop.. any suggestions?
Click to expand...
Click to collapse
Did you wipe data when you installed it? It's usually highly recommended
Sent from my GT-I9100 using xda premium
kilometers4 said:
Did you wipe data when you installed it? It's usually highly recommended
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes I wiped data, cache and dalvik cache. Couldn't get into recovery so i just re-flashed my firmware via odin. All is good now and successfully flashed cm9 with no issues. Must have been a bug in the rom.
I am running a Siyah Kernel 4.3.3 with mcswap, I tried flasing 3 different 4.1.2 roms on the phone but it produced a Black screen each time on the 2nd rom section. It runs fine when i flash a 4.1.1 version with the custom boot animations but shows a blank screen on flashing the latest 4.1.2 AOKP, paranoidandroid or supernexus. Please Help.
Did you full wipe?
Sent from Team Pirate! Using Tapatalk 2
Nick281051 said:
Did you full wipe?
Sent from Team Pirate! Using Tapatalk 2
Click to expand...
Click to collapse
Yes I did Data/Cache as well as dalvic cache, but no use still a black screen.
pranavvm1992 said:
Yes I did Data/Cache as well as dalvic cache, but no use still a black screen.
Click to expand...
Click to collapse
Try not flashing siyah
Sent from Team Pirate! Using Tapatalk 2
Nick281051 said:
Try not flashing siyah
Sent from Team Pirate! Using Tapatalk 2
Click to expand...
Click to collapse
It's a kernel mismatch, are you using the Mali version of Siyah? You should be.
Sent from my SGH-I777 using xda premium
korockinout13 said:
It's a kernel mismatch, are you using the Mali version of Siyah? You should be.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I was thinking that, but I figured just tell him not to flash it to start off.
Sent from Team Pirate! Using Tapatalk 2
korockinout13 said:
It's a kernel mismatch, are you using the Mali version of Siyah? You should be.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Do you mean flash the first one CWM flashable one or the second one 'ICS' one i did try the first but that didnt boot the phone itself.
P.S-I'm running 'F1 Galaxy Nexus' rom as the primary rom
pranavvm1992 said:
Do you mean flash the first one CWM flashable one or the second one 'ICS' one i did try the first but that didnt boot the phone itself.
P.S-I'm running 'F1 Galaxy Nexus' rom as the primary rom
Click to expand...
Click to collapse
I meant this Image
I'm not sure what u are asking, but it seems like you're confused. 4.0.x is ICS. so flash an ICS kernel. 4.1.x is jellybean. So flash a jellybean kernel. If one kernel doesn't do what u want, try another. All of this information is already available here and in the development threads.
Flash AOKP and Gapps and thats it. Make sure to factory reset and wipe extweaks and init.d scripts in kernel specific settings and then reboot.
Phalanx7621 said:
I'm not sure what u are asking, but it seems like you're confused. 4.0.x is ICS. so flash an ICS kernel. 4.1.x is jellybean. So flash a jellybean kernel. If one kernel doesn't do what u want, try another. All of this information is already available here and in the development threads.
Click to expand...
Click to collapse
Oh ok, Thank you will try it out now.
Hi!
I tried to install a custom rom on Samsung galaxy s2 and I do wipe data/factory reset and now galaxy s2 won't turn on,recovery mode or download mode.Please help me.
But sometimes the phone is warm on top where is the front camera.
What means that?
Lol. Which ROM did you try?
Brickbug?
Sent from my GT-I9100 using xda app-developers app
drspikes said:
Lol. Which ROM did you try?
Brickbug?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
This is [ROM][4.1.2][AOKP/CM/PA] GT-I9100/I9100P Vanilla RootBox [12/11][v3.2][Nightlies]
gogupaul said:
This is [ROM][4.1.2][AOKP/CM/PA] GT-I9100/I9100P Vanilla RootBox [12/11][v3.2][Nightlies]
Click to expand...
Click to collapse
Please confirm that your model number is GT I9100 OR GT I9100G?
Sent from my GT-I9100 using xda premium
xDa_nightfury said:
Please confirm that your model number is GT I9100 OR GT I9100G?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
is GT I9100 and I try to put in recovery or download mode but doesn't work.(crying:
gogupaul said:
is GT I9100 and I try to put in recovery or download mode but doesn't work.(crying:
Click to expand...
Click to collapse
before installing that custom rom, which rom u ver using, any info on that, like was it stock ICS v4.0.4 or v4.0.3 also was ur phone rooted before of installing the custom ROm
Sun90 said:
before installing that custom rom, which rom u ver using, any info on that, like was it stock ICS v4.0.4 or v4.0.3 also was ur phone rooted before of installing the custom ROm
Click to expand...
Click to collapse
4.0.3 and the phone wasn't rooted before
it died so sorry... go to the nearst samsong branch
gogupaul said:
Hi!
I tried to install a custom rom on Samsung galaxy s2 and I do wipe data/factory reset and now galaxy s2 wo't turn on,recovery mode or download mode.Please help me.
Click to expand...
Click to collapse
ffs, here we go again.
Do not put stupid topic titles like "HELP". Titles are supposed to be descriptive, use common sense.
Use browse and search functions before creating topics. There just isn't any excuse or justification for you creating this topic.
eng_ibrahim said:
it died so sorry... go to the nearst samsong branch
Click to expand...
Click to collapse
but she work with usb jig?
gogupaul said:
but she work with usb jig?
Click to expand...
Click to collapse
If she does flash a stock firmware
Sent from my potato running a potato.
Hi, im trying to install the CM10.1 on my phone, i already flashed the ClockWorkMod-Recovery 5.5.0.4 on the phone. I tried with Cloclworkmod recovery 6.0.0.1 too and i got struck on status 7. I also tried downloading another ROMs from cyaongenmod's page, but i get the same error. Thanks in advance for your help.
Flash CWM 6.0.1.2 or later.
CWM 6.0.1.2
przemcio510 said:
Flash CWM 6.0.1.2 or later.
Click to expand...
Click to collapse
Hi przemcio510, where can i find it, I just found 6.0.1.1. Thank you for replying
Status 7 generally means you are attempting to install a ROM that does not match the model number for your device.
Where did you download the ROM, and what is your exact model number? (the model number will be printed on a label underneath the battery)
While going from xxslj to cm10.1 I faced the same problem. I restored my previous backup which was rootbox and then I installed CM10.1 and it worked without any problem.
Of course this will work only if you have backup..
Else you download siyah kernel for s2 from gokhanmoral.com flash it via Odin and then try to install whatever you want to
Sent from my Xoom using xda app-developers app
But don't use Siyah with CM10.1!
Your device won't run properly
Try dorimanx 7.33
Sent from my GT-I9100 using xda app-developers app
Dorimanx worked
linzinator said:
but don't use siyah with cm10.1!
Your device won't run properly
try dorimanx 7.33
sent from my gt-i9100 using xda app-developers app
Click to expand...
Click to collapse
i love you dorimanx worked!!!!!!!!!!!!!!!!!! Thanks a lot!
No problem
Sent from my GT-I9100 using xda app-developers app
i'm to getting the same error, i'm on rooted & leaked XXLSJ firmware.
Whenever i try to flash the ROM....'it says installation aborted, status 7' something like that.
i'm sure that i'm installing the correct rom with my version, i also did by doing factory reset & then trying, bust still getting same error
what should i do now?
sorayakana said:
i love you dorimanx worked!!!!!!!!!!!!!!!!!! Thanks a lot!
Click to expand...
Click to collapse
Can u provide me the link for 7.33 bcs I cant find it in here, dont know why!!
Sent from my GT-I9100 using xda premium
ssbnasa said:
Can u provide me the link for 7.33 bcs I cant find it in here, dont know why!!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Search dorimanx in "google" , and hit the second result i cant give you the exact link because i dont got the 10 posts XD