On the Phone
"AP Fastboot Mode (S) (Flash Failure)
0A.77
eMMC Info:Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED, Status Code: 0
Battery, OK
OK to Program
Transfer Mode:
USB Connected"
no matter what I do it will only boot up to here.
I was able to get into recovery and reinstall the Jellybean update from external
if finished no errors but when rebooted right back to AP fastboot screen
Help Please
Kens Inc said:
On the Phone
"AP Fastboot Mode (S) (Flash Failure)
0A.77
eMMC Info:Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED, Status Code: 0
Battery, OK
OK to Program
Transfer Mode:
USB Connected"
no matter what I do it will only boot up to here.
I was able to get into recovery and reinstall the Jellybean update from external
if finished no errors but when rebooted right back to AP fastboot screen
Help Please
Click to expand...
Click to collapse
If Battery is OK, use Razr Utility 1.82 to unbrick it.
If Battery is Low:
You need to buy a Motorola Factory Cable. They are very cheap. I had to buy one as well, and it fixed my Razr in Boot Failure.
Buy one here: http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40
*Make sure it's the right cord for your device (XT910)* DO NOT BUY FROM CHINA!! (I have had bad experience)
How to use it: http://www.usbstyle.com/cables/motor...nbrick-rooted/
(Scroll down for instructions)
No need to use RSD Lite, just use Razr Utility 1.82!
Download here: http://rootzwiki.com/topic/37761-dro...odels-windows/
Hope I helped!
Related
Hi guys,
I purchased a Motorola Razr XT910 with MIUM android.Today I did format /data partition in MIUI-recovery tool and factory reset. Now when you turn on the Motorola logo appears and then just a black screen. Nothing more.
Please help, I do not know what to do. The phone does not even turn it off.
In fastboot is not communicating with RSD lite.
rainapp trenches
Hello!
The phone does not even turn it off.
Click to expand...
Click to collapse
Looks like it's on, but with the blank black screen. You should hold power button for 10+ sec, until u see your screen blink. After that hold volume buttons and turn device on - choose AP fastboot and flash it with rsd lite.
RysTech said:
Hello!
Looks like it's on, but with the blank black screen. You should hold power button for 10+ sec, until u see your screen blink. After that hold volume buttons and turn device on - choose AP fastboot and flash it with rsd lite.
Click to expand...
Click to collapse
Thanx for reply but,..
In AP Fastboot mode phone write:
Code:
AP Fastboot Flash mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down Device is LOCKED. Status Code: 0
Battery OK
Ok to Program
Connect USB
Data Cable
A Have RSD Lite 5.7 and newest drivers (MotorolaDeviceManager_2.3.4) on Windows XP
After connecting the phone to the PC in fastboot mode, the phone in RSD Lite not appear. nothing
But in BP SBF Flash mode the phone with the computer and RSD lite connect properly as Flash MZ600.
I have another computer with Windows 7 and there is the problem exactly the same.
montecze said:
Thanx for reply but,..
In AP Fastboot mode phone write:
Code:
AP Fastboot Flash mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down Device is LOCKED. Status Code: 0
Battery OK
Ok to Program
Connect USB
Data Cable
A Have RSD Lite 5.7 and newest drivers (MotorolaDeviceManager_2.3.4) on Windows XP
After connecting the phone to the PC in fastboot mode, the phone in RSD Lite not appear. nothing
But in BP SBF Flash mode the phone with the computer and RSD lite connect properly as Flash MZ600.
I have another computer with Windows 7 and there is the problem exactly the same.
Click to expand...
Click to collapse
do you see new device in device manager when connecting RAZR in ap fastboot mode?
Sent from my DROID RAZR using xda premium
yoyurik said:
do you see new device in device manager when connecting RAZR in ap fastboot mode?
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
After connecting the phone in fastboot mode, the computer RSD lite does not react. In RSD lite does not appear any device, but in BP SBF Flash mode yes.
Guys, please help me, I do not know what to do.
Hello friends, I need your help to solve my problem, I tried everything to recover my phone, and it still fails.
I installed CM9 on my xt910 room, and every time I turn on my device, it does not charge and does not leave the boot screen, I've tried clearing the cache for recovery, and tried to recover back to the original room using RSD, but when AP Fastboot put in, it appears on the screen:
AP Fastboot Flash Mode (s)
0A.74
eMMC Info: Size 16G
To return to normal mode - firts press power key to power down
Device is Locked. Status Code: 0
Baterry OK
OK to Program
Transfer Mode:
USB Connected
And when I try to flash by RSD Lite, of this error
failed flashing process 6/18 flash cdt.bin "cdt.bin" -> Phone returned fail .
U hv to download n try another file n flash again with rsd.(depend on your region)
Sent from my XT910 using xda premium
I've tried, I can not find a solution to fix my problem, help me!!
I was able to root my droid then I was going to try to unlock the boot loader so I could flash a custom ROM. Well the owner of the phone couldn't get it to unlock so he tried flashing CM using RSD.
It failed, it was stuck on this screen;
Invalid Flash Mode (S) (Flash failure)
0A.6C
To return to normal mode - first press power key to power down
Device is LOCKED, Status Code:0
Battery Low
Cannot Program
Connect USB
Data Cable
So I used this walkthrough to try and remedy the problem;
http://forum.xda-developers.com/showthread.php?t=1549625
Then I started getting this screen;
Invalid Flash Mode (S) (boot failure)
0A.6C
To return to normal mode - first press power key to power down
Device is LOCKED, Status Code:0
Battery Low
Cannot Program
Connect USB
Data Cable
Invalid CG OTV (CC: System): Invalid SP Data
Invalid CG Version (CC: System)
Invalid CG OTV (CC: System)
After a lot of reading, I found out I'd need a factory cable to remedy the situation. I believe the phone is wiped and can't boot into an OS and that is why it is getting stuck. So I used the following links to build my own;
http://www.droidforums.net/forum/droid-labs/146492-how-why-make-your-own-motorola-factory-cable.html
http://forum.xda-developers.com/showthread.php?t=1077414
After completing the cable and plugging it in I am now getting this screen;
AP Fastboot Flash Mode (S) (Flash Failure)
0A.66
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
At this point I believe I fixed his problem, keep in mind, I'm coming into this process after it got stuck in the fastboot loop. So I start trying to use the following link to unlock the bootloader so I can try to flash back to stock(which by the way, I can't for the life of me find a stock ROM to flash).
I am using this link https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-b
I installed the latest Motorola drivers, I then installed Android SDK tools through the command prompt, I am now trying to get the device ID of the phone so I can unlock it and flash a ROM.
Even though I installed the Moto drivers, my computer isn't detecting the device, it is coming up as unknown in the device manager, I was going to manually assign the drivers to the USB device but I can't find the 32bit drivers to do that and what I downloaded from MOTO is an .exe that installs, I'm assuming several drivers for different devices.
Now I went into the command prompt to see if fastboot.exe can see the device plugged in, because prior to this fastboot problem his computer would at least show his IMEI even though he couldn't get it to display the unlock data.
I'm not getting anything, I'm guessing the jump to PIN 1 to 4 is correct but it doesn't know it's plugged into a computer? Even though my computer knows SOMETHING is plugged in. I'm lost, rooting and building ROMS for my Samsung devices was so much easier.
C:\Windows\system32>cd C:\Users\mk1daily\Desktop\androidsdk\adt-bundle-windows-x
86-20130219
C:\Users\mk1daily\Desktop\androidsdk\adt-bundle-windows-x86-20130219>"SDK Manage
r.exe"
C:\Users\mk1daily\Desktop\androidsdk\adt-bundle-windows-x86-20130219>cd C:\Users
\mk1daily\Desktop\androidsdk\adt-bundle-windows-x86-20130219\sdk\platform-tools
C:\Users\mk1daily\Desktop\androidsdk\adt-bundle-windows-x86-20130219\sdk\platfor
m-tools>fastboot devices
C:\Users\mk1daily\Desktop\androidsdk\adt-bundle-windows-x86-20130219\sdk\platfor
m-tools>fastboot.exe devices
AP Fastboot Flash Mode (S) (Flash Failure)
0A.66
Device is LOCKED. Status Code: 0
Click to expand...
Click to collapse
I have the same problem except that the battery is depleted. Any help would be greatly appreciated!
Great Gizmos said:
I have the same problem except that the battery is depleted. Any help would be greatly appreciated!
Click to expand...
Click to collapse
You will need to build a factory cable using the links I posted or buy a factory cable. They are $10 on eBay. The factory cable bypasses looking for a battery and will let you flash a rom. I get the "Battery OK, OK to Program" on my phone but it isn't showing up on my computer, that's my issue.
Try THis
If you are having trouble changing the battery while stuck at the Fash Failure Screen
Try this - Plug in the phone to a AC outlet. While at the Flash Failure screen, Hold down the Volume Up and Power button at the same time to turn off the phone. After the phone flashes (turns off), let go of the buttons and then quickly hold down both the up and down buttoms and the power button. A new menu will appear, with many different options (boot options). Select [Normal Powerup]. this will try to boot up the phone, notice it is low on battery, and start charging. IT will change to the screen with a outline of a battery being charged.
Hope this helps
Eighthourblink said:
If you are having trouble changing the battery while stuck at the Fash Failure Screen
Try this - Plug in the phone to a AC outlet. While at the Flash Failure screen, Hold down the Volume Up and Power button at the same time to turn off the phone. After the phone flashes (turns off), let go of the buttons and then quickly hold down both the up and down buttoms and the power button. A new menu will appear, with many different options (boot options). Select [Normal Powerup]. this will try to boot up the phone, notice it is low on battery, and start charging. IT will change to the screen with a outline of a battery being charged.
Hope this helps
Click to expand...
Click to collapse
^^Not my problem at all.
So I bought the factory cable, it came in today and the device registers on my computer as MOT Single ADB Interface.
I also get this when I check for devices using command.
C:\Users\Josh\Desktop\androidsdk\sdk\platform-tools>fastboot.exe devices
01547AE90900B014 fastboot
I still can't get this command to work;
C:\Users\Josh\Desktop\androidsdk\sdk\platform-tools>fastboot.exe oem get_unlock_
data
...
FAILED (remote: unsupported command)
finished. total time: 0.006s
I tried flashing the XML file that I believe is stock and it fails; I attached it as rsdscreen.jpg
I'm completely lost, hoping someone can shed some light. At this point, I don't even care if it is a stock ROM or a custom ROM, I just want something that works.
Phone fixed
I FIXED MY PROBLEM!!
I bought the factory cable on eBay and rebooted into fastboot mode.
Like for cable;
Can't post link because I'm a new user, if you want the link PM me.
Then I downloaded Matt Groff's Utility here;
Can't post link because I'm a new user, if you want the link PM me.
Followed the instructions, got the phone back to stock ICS
Phone had to be wiped using his utility but I don't care, phone is unbricked and all my pictures and stuff are on the SD card anyways. Kudos to Matt Groff.
Hi all, I'm new in this forum but i read a lot of your thread in order to learn about android phone.
First of all, sorry for my bad english.
I have a problem with my razr maxx. I bought it on ebay (a used one). I use Razr/Maxx XT912 (Matt Droid Razr Utility) and now the phone is in bootloop.
This is the error message:
invalid flash mode (s) (boot failure)
0A.77
emmc info: seize 16gb
Device is LOCKED. STATUS CODE 0
battery ok.
ok to program
transfer mode:
usb connected
AND
Invalid cg otv (CG:system): invalid sp data
invalid cg version (cg:system)
invalid cg otv (cg:system)
I'm trying to resolve with this old thread http://forum.xda-developers.com/showthread.php?t=1524011
My phone model is xt910 type name m0c2e fcc id : ihdp56me2 ic id 109o-p56me2 and it has verizon apps. (i red the it on the back of the phone) BUT I also use the imei in the motorola's support to find out the model of the phone, and this is the answer: XT912 (Spyder LTE) (i also find a screen of the phone with some info -> see the attachments ). [the phone is only with motorola brand].So which is the right model? I also have (or better had) supersu already on it. I use it with a sim card (i use it with in gsm mode but it has also cdma mode. The languages are only spanish and english )
I arrive at this point ( from this "guide" http://forum.xda-developers.com/showthread.php?t=1524011) http://forum.xda-developers.com/showthread.php?t=1362956 but i don't know which one i must download.
ps.
i also tried:
1-download cdt.bin ( http://www.mediafire.com/?ua1nj6ds6r0vtue )
2-download fastboot files ( http://dfiles.eu/files/bih3tmg7b )
3-restart your phone in to bootloader ( fastboot ) mode
4-connect your phone via usb cable
5-open cmd.exe in your pc an go to fastboot files
6-flash cdt.bin via this command -------------------------------------- fastboot flash cdt.bin cdt.bin
7-restart your phone in to stock recovery
8-do triple wipe and restart your phone
and you can see the result in the attachments..
What can i do in order to resolve the bootloop? I'm desperate
Thank you
Hi!
Flash this rom with RSD Litehttp://sbf.droid-developers.org/download.php?device=9&file=788
Let me know if worked. You battery may be drained by this time, if so, you'll need to use a factory cable.
But, let me know if you could flash with RSD Lite first.
Cheers
i'm trying but it failed. (usb error at status 22/24 and 18/24). Now i repeat the action. I have the original cable and the phone is in fastboot flash mode
It's working ! THANK YOU!!!
In order to avoid the same problems, How can i change rom? (which one can i use ?) Which programs and apps do i need to use? Where i can find a guide? Which is the best way in order to improve the gsm signal?
Thank you,
Roncallica
An other idiot question. Now it is without supersu and it is locked. What can i do?
roncallica said:
An other idiot question. Now it is without supersu and it is locked. What can i do?
Click to expand...
Click to collapse
Hi!
Glad it's working first place. You'll find all you need just navigating throught the Development section. You have a root method easy to use to your phone, a safe to use recovery and a lot of kernells and roms to pick up onde of your choice.
Before doing anything like flashing roms or installing things be sure you've charged you phone, always. Remember Razr battery are not removable, so, if you brake it while doing some stuff you need no return to your previous rom and start all over again.
First step now? Root this thing!
Cheers
Do i have to use this guide? I mean in order to root xt912 http://forum.xda-developers.com/showthread.php?t=2230140 or can i use this one? (http://www.youtube.com/watch?v=YIEO0pedtzE). Can i modify kernells and radio in order to obtain more gsm signal? i don't find a safe recovery for xt912 spider, what can i do? I have some problems with internet and it's a bit slow
thank you!
Having a simillar problem with my XT910, when I power it on it doesn't boot but goes straight to the error message saying
AP Fastboot Flash Mode (S) (Recipe Failure)
0A.77
eMMC Info: Size 16G
To returno to normal mode - first press power key to power down
Device is LOCKED. Status code: 0
Battery OK
OK to Program
Connect USB
Data Cable
If I try to flash ROM via RSDLite, it recognizes the phone but I got flashing error on the first step. If I press power to shut it down, then VOL+/- with Power key, and select Normal Powerup, in more than 90% phone goes to a bootloop, sometimes it boots normaly and then everything works. If I select BP HW Diag & Boot AP, it boots every time but when I try to connect it my PC asks for some drivers for Diag and so which are not installed on PC and the phone won't charge a battery when connected to a charger - everything else is working.
Phew, that was a long post! :laugh: Any idea what might be a problem?
I forgot to mention that I bought the phone in this condition so I don't have a clue what a previous owner flashed (or tried to flash). Android version is official 4.1.2, system version 982.124.14.XT910.Retail.en.EU, build number 9.8.20-124_SPUEM-14.
Trying to flash stock XT912 MAXX with Matt's 2/1/13 package. I choose "1 Flash Official Jellybean Firmware (Wipe Data)". It is hanging after the first reboot. (image attached).
Phone says:
AP Fastboot Flash Mode (S)
0A.77
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Transfer Mode:
USB Connected
Desktop is running Windows 7 x64.
Please help.
Problem solved. I tried turning off all startup programs on the PC. This time It got to the second reboot and hung.
I switched to a different PC and it sailed through. All set. :victory: