Hi guys,
I purchased a Motorola Razr XT910 with MIUM android.Today I did format /data partition in MIUI-recovery tool and factory reset. Now when you turn on the Motorola logo appears and then just a black screen. Nothing more.
Please help, I do not know what to do. The phone does not even turn it off.
In fastboot is not communicating with RSD lite.
rainapp trenches
Hello!
The phone does not even turn it off.
Click to expand...
Click to collapse
Looks like it's on, but with the blank black screen. You should hold power button for 10+ sec, until u see your screen blink. After that hold volume buttons and turn device on - choose AP fastboot and flash it with rsd lite.
RysTech said:
Hello!
Looks like it's on, but with the blank black screen. You should hold power button for 10+ sec, until u see your screen blink. After that hold volume buttons and turn device on - choose AP fastboot and flash it with rsd lite.
Click to expand...
Click to collapse
Thanx for reply but,..
In AP Fastboot mode phone write:
Code:
AP Fastboot Flash mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down Device is LOCKED. Status Code: 0
Battery OK
Ok to Program
Connect USB
Data Cable
A Have RSD Lite 5.7 and newest drivers (MotorolaDeviceManager_2.3.4) on Windows XP
After connecting the phone to the PC in fastboot mode, the phone in RSD Lite not appear. nothing
But in BP SBF Flash mode the phone with the computer and RSD lite connect properly as Flash MZ600.
I have another computer with Windows 7 and there is the problem exactly the same.
montecze said:
Thanx for reply but,..
In AP Fastboot mode phone write:
Code:
AP Fastboot Flash mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down Device is LOCKED. Status Code: 0
Battery OK
Ok to Program
Connect USB
Data Cable
A Have RSD Lite 5.7 and newest drivers (MotorolaDeviceManager_2.3.4) on Windows XP
After connecting the phone to the PC in fastboot mode, the phone in RSD Lite not appear. nothing
But in BP SBF Flash mode the phone with the computer and RSD lite connect properly as Flash MZ600.
I have another computer with Windows 7 and there is the problem exactly the same.
Click to expand...
Click to collapse
do you see new device in device manager when connecting RAZR in ap fastboot mode?
Sent from my DROID RAZR using xda premium
yoyurik said:
do you see new device in device manager when connecting RAZR in ap fastboot mode?
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
After connecting the phone in fastboot mode, the computer RSD lite does not react. In RSD lite does not appear any device, but in BP SBF Flash mode yes.
Guys, please help me, I do not know what to do.
Related
On the Phone
"AP Fastboot Mode (S) (Flash Failure)
0A.77
eMMC Info:Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED, Status Code: 0
Battery, OK
OK to Program
Transfer Mode:
USB Connected"
no matter what I do it will only boot up to here.
I was able to get into recovery and reinstall the Jellybean update from external
if finished no errors but when rebooted right back to AP fastboot screen
Help Please
Kens Inc said:
On the Phone
"AP Fastboot Mode (S) (Flash Failure)
0A.77
eMMC Info:Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED, Status Code: 0
Battery, OK
OK to Program
Transfer Mode:
USB Connected"
no matter what I do it will only boot up to here.
I was able to get into recovery and reinstall the Jellybean update from external
if finished no errors but when rebooted right back to AP fastboot screen
Help Please
Click to expand...
Click to collapse
If Battery is OK, use Razr Utility 1.82 to unbrick it.
If Battery is Low:
You need to buy a Motorola Factory Cable. They are very cheap. I had to buy one as well, and it fixed my Razr in Boot Failure.
Buy one here: http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40
*Make sure it's the right cord for your device (XT910)* DO NOT BUY FROM CHINA!! (I have had bad experience)
How to use it: http://www.usbstyle.com/cables/motor...nbrick-rooted/
(Scroll down for instructions)
No need to use RSD Lite, just use Razr Utility 1.82!
Download here: http://rootzwiki.com/topic/37761-dro...odels-windows/
Hope I helped!
Hello friends, I need your help to solve my problem, I tried everything to recover my phone, and it still fails.
I installed CM9 on my xt910 room, and every time I turn on my device, it does not charge and does not leave the boot screen, I've tried clearing the cache for recovery, and tried to recover back to the original room using RSD, but when AP Fastboot put in, it appears on the screen:
AP Fastboot Flash Mode (s)
0A.74
eMMC Info: Size 16G
To return to normal mode - firts press power key to power down
Device is Locked. Status Code: 0
Baterry OK
OK to Program
Transfer Mode:
USB Connected
And when I try to flash by RSD Lite, of this error
failed flashing process 6/18 flash cdt.bin "cdt.bin" -> Phone returned fail .
U hv to download n try another file n flash again with rsd.(depend on your region)
Sent from my XT910 using xda premium
I've tried, I can not find a solution to fix my problem, help me!!
I tried to SBF back to stock 2.3.4 using EzSBf 2.3.4 DX2_4.5.1_1
I booted the EZSBF CD, Selected Option 1 to SBF. Followed instructions to put the phone in RSD mode.
The flash started and failed with
Critical error
1337
510B
Now, I can boot the phone into the normally into system that was originally installed, but I cannot get into either RSD mode or Fastboot.
If I hold either volume up for RSD or Volume Down for fastboot and then hold power, I get the M logo, but no words about fastboot or RSD and as soon as I release the power button, it boots normally..
I have held power and volume for as long as 1 minute.
I installed RSD lite, but it will not find the phone as I cannot get it into the proper state for RSD.
Did I trash the bootloader somehow?
Len
couple of things you can try
power phone off, connect phone to usb cable, hold volume up, then connect to pc (don't touch power button)
or
disconnect usb cable, power phone off, hold volume up, press power until you see moto logo, continue holding volume up till you see starting RSD protocol support
before you try flashing again
verify ezSBF was downloaded correctly by comparing md5 checksum: 2dec1590e4c8fb9d89e63b0d63e00c4a
Verify that your downloads are complete with MD5/SHA-1 Hash Checksums
---------- Post added at 11:05 PM ---------- Previous post was at 10:35 PM ----------
a another option
download moto-fastboot.rar
create a new folder in c drive named adb
unzip moto-fastboot.rar in adb folder
copy file in unziped folder to adb folder
power on phone normally, connect usb cable to phone and pc
on phone: menu button>settings>applications>Development> check USB debugging then check ok allow
Open the CMD (start menu>All programs>accessories>command prompt)
and enter the these commands.
cd/
cd c:adb
adb reboot rsd protocol support
phone will reboot to a moto dual core screen, but it will really be rsd protocol support
and rsd lite will see it as SE Flash Datona
Thanks.
The reason I was trying to do the SBF was my son's phone was freezing and lagging, I did a factory reset and it seems to have less lag. If the problem persists (and I can get the phone away from him) I will try your suggestions.
I am also using a DX2 and mine boots into RSD and Fastboot as its supposed to so I know I am trying to do it right.
Len
Edit.
On a side note is there any way to fix the problem with not being able to boot into fastboot or RSD support?
On a side note is there any way to fix the problem with not being able to boot into fastboot or RSD support?
Lenster45 said:
On a side note is there any way to fix the problem with not being able to boot into fastboot or RSD support?
Click to expand...
Click to collapse
flashing the sbf may fix it.
The sbf contains all the firmware for the phone.
sd_shadow said:
flashing the sbf may fix it.
The sbf contains all the firmware for the phone.
Click to expand...
Click to collapse
OK Thanks again
Trying to flash stock XT912 MAXX with Matt's 2/1/13 package. I choose "1 Flash Official Jellybean Firmware (Wipe Data)". It is hanging after the first reboot. (image attached).
Phone says:
AP Fastboot Flash Mode (S)
0A.77
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Transfer Mode:
USB Connected
Desktop is running Windows 7 x64.
Please help.
Problem solved. I tried turning off all startup programs on the PC. This time It got to the second reboot and hung.
I switched to a different PC and it sailed through. All set. :victory:
I have the droid razr n was wanting to root it for fun but I don't want to brick it by messing up so I wanted to make sure it was possible for my phone
-spektor- said:
I have the droid razr n was wanting to root it for fun but I don't want to brick it by messing up so I wanted to make sure it was possible for my phone
Click to expand...
Click to collapse
Use safe root:
https://forum.xda-developers.com/attachment.php?attachmentid=2760984&d=1400951117
here video tutorial: http://youtu.be/Eunw58NwFrQ
Dont forget to install drivers first for the device if using windows based pc. After you root use install safe strap 3.75 if your going to be flashing anything or custom roms. Happy rooting.
OGdroidster said:
Use safe root:
https://forum.xda-developers.com/attachment.php?attachmentid=2760984&d=1400951117
here video tutorial:
Dont forget to install drivers first for the device if using windows based pc. After you root use install safe strap 3.75 if your going to be flashing anything or custom roms. Happy rooting.
Click to expand...
Click to collapse
I seemed to have messed up and now it doesn't boot past the Motorola logo it just goes to black screen, while its in the black screen adb is available, I can access fastboot and all but it won't boot up, RSD Lite 6.2.4, i think, doesn't seem to detect my phone is this fixable?
-spektor- said:
I seemed to have messed up and now it doesn't boot past the Motorola logo it just goes to black screen, while its in the black screen adb is available, I can access fastboot and all but it won't boot up, RSD Lite 6.2.4, i think, doesn't seem to detect my phone is this fixable?
Click to expand...
Click to collapse
If you can get to fastboot mode then you should be able to get it going. You will need the drivers installed for your device then you will need the correct stock firmware to flash with rsd lite. When you get to fastboot mode scroll to ap fast boot then tap the volume up button that will take you to the bootloader to flash. Then open up rsd lite. Connect device to your computer. When it reads it click where it shows your device then you should see all information in rsd lite then click start you will get a prompt upon click of start you click decompress and flash button. Just sit back and wait like 10 to 15 minutes. Sometimes it will get stuck at boot logo and rsd lite will say manually reboot phone so go ahead and do so. Once you are in past the bootlogo and actually booted up go ahead and unplug the device from USB port of computer. That's its all done. Here is a side note: when you go into ap fast boot and it says battery is low that means that you will not be able to flash. You will need a fastboot cable. If run into that just let me know I have amazon link where it cost 10 bucks. Cheapest one that's works on our device. I never had a problem with not working.
OGdroidster said:
If you can get to fastboot mode then you should be able to get it going. You will need the drivers installed for your device then you will need the correct stock firmware to flash with rsd lite. When you get to fastboot mode scroll to ap fast boot then tap the volume up button that will take you to the bootloader to flash. Then open up rsd lite. Connect device to your computer. When it reads it click where it shows your device then you should see all information in rsd lite then click start you will get a prompt upon click of start you click decompress and flash button. Just sit back and wait like 10 to 15 minutes. Sometimes it will get stuck at boot logo and rsd lite will say manually reboot phone so go ahead and do so. Once you are in past the bootlogo and actually booted up go ahead and unplug the device from USB port of computer. That's its all done. Here is a side note: when you go into ap fast boot and it says battery is low that means that you will not be able to flash. You will need a fastboot cable. If run into that just let me know I have amazon link where it cost 10 bucks. Cheapest one that's works on our device. I never had a problem with not working.
Click to expand...
Click to collapse
Ah, so if it's low battery it won't connect to rsd lite? I can't tell how charged it is because it doesn't display battery when I plug it in when it's off but I'll charge it for a bit n get back to it.
When you go to fastboot mode then to ap fastboot it will say low if to low to flash otherwise it will say ok