Trying to flash stock XT912 MAXX with Matt's 2/1/13 package. I choose "1 Flash Official Jellybean Firmware (Wipe Data)". It is hanging after the first reboot. (image attached).
Phone says:
AP Fastboot Flash Mode (S)
0A.77
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Transfer Mode:
USB Connected
Desktop is running Windows 7 x64.
Please help.
Problem solved. I tried turning off all startup programs on the PC. This time It got to the second reboot and hung.
I switched to a different PC and it sailed through. All set. :victory:
Related
Hi,
I get the below message whenever I reboot. It started when I tried to flash an ICS update from GB.
I have treied the solutions mentioned in the other threads on XDA but whenever I reboot I just get the error below. I cannot go into AP Fastboot message as when I select it from the menu I once again get the message below.
I dowloaded the ICS update from the Settings About Phone Update menu and it starts to install then tries to reboot to complete the installation but of course gets stuck at the first step with the below message.
I tried downloading the radio empty_radio.img file from this solution thread http://forum.xda-developers.com/showthread.php?t=1634223 and flash it using RSD lite 5.7 but when I try to select the file it is not listed as a suitable file type.
I seem to have run out of options. Please will somebody help. I am ready to punch the wall!
Thanks
Fergy
Here's the message (I have googled solutions for this but found none that mention the QA.6C but not the QA.74 as below):
The Device Error LOCKED. Status Code: 0 "
"Fastoboot AP mode (S) (Flash Failure)
QA.74
To return to normal mode - first press power key to power down
Device to LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable "
You haven't specified which carrier you are using. Try going to sbf.droid-developers.com and locating the ICS build version for your carrier. Download it, then extract the dukes, and point rsdlite to the xml file.
Make sure your battery doesn't go under 50% since you can't fastboot if that's the case.
Good luck
Sent from my XT894 running ICS
I am with Telstra in Australia. I bought the phone in HK.
I cannot seem to flash anything. Flash always fails.
What are dukes? I don't really understand your instructions as I am old
Thanks for answering. I really need to fix this.
On the Phone
"AP Fastboot Mode (S) (Flash Failure)
0A.77
eMMC Info:Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED, Status Code: 0
Battery, OK
OK to Program
Transfer Mode:
USB Connected"
no matter what I do it will only boot up to here.
I was able to get into recovery and reinstall the Jellybean update from external
if finished no errors but when rebooted right back to AP fastboot screen
Help Please
Kens Inc said:
On the Phone
"AP Fastboot Mode (S) (Flash Failure)
0A.77
eMMC Info:Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED, Status Code: 0
Battery, OK
OK to Program
Transfer Mode:
USB Connected"
no matter what I do it will only boot up to here.
I was able to get into recovery and reinstall the Jellybean update from external
if finished no errors but when rebooted right back to AP fastboot screen
Help Please
Click to expand...
Click to collapse
If Battery is OK, use Razr Utility 1.82 to unbrick it.
If Battery is Low:
You need to buy a Motorola Factory Cable. They are very cheap. I had to buy one as well, and it fixed my Razr in Boot Failure.
Buy one here: http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40
*Make sure it's the right cord for your device (XT910)* DO NOT BUY FROM CHINA!! (I have had bad experience)
How to use it: http://www.usbstyle.com/cables/motor...nbrick-rooted/
(Scroll down for instructions)
No need to use RSD Lite, just use Razr Utility 1.82!
Download here: http://rootzwiki.com/topic/37761-dro...odels-windows/
Hope I helped!
Hi guys,
I purchased a Motorola Razr XT910 with MIUM android.Today I did format /data partition in MIUI-recovery tool and factory reset. Now when you turn on the Motorola logo appears and then just a black screen. Nothing more.
Please help, I do not know what to do. The phone does not even turn it off.
In fastboot is not communicating with RSD lite.
rainapp trenches
Hello!
The phone does not even turn it off.
Click to expand...
Click to collapse
Looks like it's on, but with the blank black screen. You should hold power button for 10+ sec, until u see your screen blink. After that hold volume buttons and turn device on - choose AP fastboot and flash it with rsd lite.
RysTech said:
Hello!
Looks like it's on, but with the blank black screen. You should hold power button for 10+ sec, until u see your screen blink. After that hold volume buttons and turn device on - choose AP fastboot and flash it with rsd lite.
Click to expand...
Click to collapse
Thanx for reply but,..
In AP Fastboot mode phone write:
Code:
AP Fastboot Flash mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down Device is LOCKED. Status Code: 0
Battery OK
Ok to Program
Connect USB
Data Cable
A Have RSD Lite 5.7 and newest drivers (MotorolaDeviceManager_2.3.4) on Windows XP
After connecting the phone to the PC in fastboot mode, the phone in RSD Lite not appear. nothing
But in BP SBF Flash mode the phone with the computer and RSD lite connect properly as Flash MZ600.
I have another computer with Windows 7 and there is the problem exactly the same.
montecze said:
Thanx for reply but,..
In AP Fastboot mode phone write:
Code:
AP Fastboot Flash mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down Device is LOCKED. Status Code: 0
Battery OK
Ok to Program
Connect USB
Data Cable
A Have RSD Lite 5.7 and newest drivers (MotorolaDeviceManager_2.3.4) on Windows XP
After connecting the phone to the PC in fastboot mode, the phone in RSD Lite not appear. nothing
But in BP SBF Flash mode the phone with the computer and RSD lite connect properly as Flash MZ600.
I have another computer with Windows 7 and there is the problem exactly the same.
Click to expand...
Click to collapse
do you see new device in device manager when connecting RAZR in ap fastboot mode?
Sent from my DROID RAZR using xda premium
yoyurik said:
do you see new device in device manager when connecting RAZR in ap fastboot mode?
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
After connecting the phone in fastboot mode, the computer RSD lite does not react. In RSD lite does not appear any device, but in BP SBF Flash mode yes.
Guys, please help me, I do not know what to do.
Hello friends, I need your help to solve my problem, I tried everything to recover my phone, and it still fails.
I installed CM9 on my xt910 room, and every time I turn on my device, it does not charge and does not leave the boot screen, I've tried clearing the cache for recovery, and tried to recover back to the original room using RSD, but when AP Fastboot put in, it appears on the screen:
AP Fastboot Flash Mode (s)
0A.74
eMMC Info: Size 16G
To return to normal mode - firts press power key to power down
Device is Locked. Status Code: 0
Baterry OK
OK to Program
Transfer Mode:
USB Connected
And when I try to flash by RSD Lite, of this error
failed flashing process 6/18 flash cdt.bin "cdt.bin" -> Phone returned fail .
U hv to download n try another file n flash again with rsd.(depend on your region)
Sent from my XT910 using xda premium
I've tried, I can not find a solution to fix my problem, help me!!
Hi there! An update of CM11 failed on my xt910. The result was the laying Android an no normal Boot was available.
While downloading RSD and stockroms ( SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTCEE_HWp2b_Service1FF_fastboot and SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTGB_HWp2b_Service1FF_fastboot from motorola ) the battery drained in the bootloop.
Finally I was able to select the fastboot option in the bootloader menu but the program printed "Battery low"
After some research I crated a factory cable.
Now the battery is ok and I was able to flash via RSD.
But in RSD I always get the error that the flash failed. (Phone returned FAIL)
I don't know what to do now. Some ideas?
Razr xt910 driver installation
Hi I am having XT910 Razr, ICS with 673.94.328.xt910.asiaretail.en.03 firmware. Now I have two problems 1) battery sucks and 2) USB drivers failed to install. So am not able to root or change the firmware. I have tried everything but failed. have downloaded the blur version of the same firmware but in the recovery mode it is showing signature verification error. Service center is also not able to help me and asking a huge money. Can some one help me on this.
Hi amit81276. You should open a new thread for your specific issue. If you give detailed error messages or behaviour I may could help.
1) battery - if the battery is too low to flash ("Battery Low" message in bootloader ap fastboot mode (access bootloader through power + vol up + vol down (to turn off and enter bootmenu))) you have to make a factory cable that allows you to connect the phone while powering it.
2) I have trouble with the drivers too. Install the Motorola Device Manager. Use C:\Program Files\Common Files\Motorola Shared\Mobile Drivers\Motorola Driver Installer.exe and bruteforce the driver to be installed. (Open the Device Manager to ensure the Mot Driver is running properly) (Sometimes I had to Clean&Install 10 times, reboot, use other USB port - very annoying)
Later I switched to another PC and there was no trouble at all.
BTT
I was able to fix the phone now. The problem was that http://sbf.droid-developers.org/ only offers 4.0.4 sbf for xt910. But I remembered that my phone was on 4.1.2 - so I was able to find the sbf on a thread here on xda ->
RAZR XT910 Firmwares SuperThread (Jelly Bean)
Remember:
Failed flashing process. 1/10 flash cdt.bin "cdt.bin_signed" -> Phone returned FAIL
Failed flashing process. flash system "system_signed" -> Phone returned FAIL
Failed flashing process. flash boot "boot" -> Phone returned FAIL
should indicate you that you are trying to flash a wrong / lower version ROM. (a downgrade won't work but in special cases)
I suggest try flashing with moto-flash! It uses fastboot which gives you real errors instead of "Phone returned FAIL". For example it returns Battery low if the battery is too low and it won't flash! Very useful to find errors! In my case the error was always 1/19 flash mbm "allow-mbmloader-flashing-mbm.bin" -> Phone returned Fail that's not usefull at all.