Hello friends, I need your help to solve my problem, I tried everything to recover my phone, and it still fails.
I installed CM9 on my xt910 room, and every time I turn on my device, it does not charge and does not leave the boot screen, I've tried clearing the cache for recovery, and tried to recover back to the original room using RSD, but when AP Fastboot put in, it appears on the screen:
AP Fastboot Flash Mode (s)
0A.74
eMMC Info: Size 16G
To return to normal mode - firts press power key to power down
Device is Locked. Status Code: 0
Baterry OK
OK to Program
Transfer Mode:
USB Connected
And when I try to flash by RSD Lite, of this error
failed flashing process 6/18 flash cdt.bin "cdt.bin" -> Phone returned fail .
U hv to download n try another file n flash again with rsd.(depend on your region)
Sent from my XT910 using xda premium
I've tried, I can not find a solution to fix my problem, help me!!
Related
[FLASH] Motorola Razr Flash Failure [Solution]
[FLASH] Flash failure - Razr [Fix]
So guys, this will be very usefull!
Friends who are experiencing this annoying problem here is the solution.
Whenever he would call my Razr was falling in AP mode Fastboot.
The Device Error LOCKED. Status Code: 0 "
"Fastoboot AP mode (S) (Flash Failure)
QA.6C
To return to normal mode - first press power key to power down
Device to LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable "
To resolve this problem follow the steps below:
[TUTORIAL]
1. Download the empty_radio.img
2. Turn off the Razr
3. Power On the Razr and select Fastboot Mode AP
4. Open the command prompt CMD
5. Go to the folder where the radio is empty
6. Make flash the radio with the following command and then type "fastboot reboot"
7. Rest assured I tested on my Razr this command does not erase the radio
8. This command will only restart the fastboot
9. Now then turn off the Razr holding vol - and power
10. Plug the Razr holding vol + vol - and power and have it start normally
11. Now restart the fastboot screen will not show more ...
fastboot flash radio empty_radio.img
fastboot reboot
[RADIO]
http://www.mediafire.com/download.php?00gtb84yemfolp3
Hey,
What is your razr model please?
Please flash a rom using the alternative flashing method (fla****) by the eternity project and that error will be gone.
Sent from my XT910 using xda premium
Opening the back cover will destroy the waterproof seal! Seriously you don't want to do this. There's an easy method.
AFAIK, most of the time this error appears on unsuccessful fastboot command. For example, you can get this error by running this command
Code:
fastboot boot boot.img
It will spit Info Command restricted! then you'll get this "Flash Failure" error on every boot up.
To clear it ,all you need is to do a successful fastboot command. Assuming you don't do something like
Code:
fastboot erase xxxx
then there's no need to do full flash. The simplest way I know is to do
Code:
fastboot flash radio empty_radio.img
fastboot restart
It seems this command write to the cache partition(unsigned) & trigger recovery mode.
Once in recovery, Press Vol-Up & Vol-Down simultaneously.
Then select reboot now.
Hope I'm clear & it help somebody.
Attached is the empty_radio file. (There's nothing inside, just ext3 partition with empty recovery folder)
Simply flash radio.img which has the same baseband version or other ROMs. Upon a successful flashing, the 'Flash failure'error message will be cleared.
Good luck
Sent from my XT910 using XDA
whirleyes said:
Opening the back cover will destroy the waterproof seal! Seriously you don't want to do this. There's an easy method.
AFAIK, most of the time this error appears on unsuccessful fastboot command. For example, you can get this error by running this command
Code:
fastboot boot boot.img
It will spit Info Command restricted! then you'll get this "Flash Failure" error on every boot up.
To clear it ,all you need is to do a successful fastboot command. Assuming you don't do something like
Code:
fastboot erase xxxx
then there's no need to do full flash. The simplest way I know is to do
Code:
fastboot flash radio empty_radio.img
fastboot restart
It seems this command write to the cache partition(unsigned) & trigger recovery mode.
Once in recovery, Press Vol-Up & Vol-Down simultaneously.
Then select reboot now.
Hope I'm clear & it help somebody.
Attached is the empty_radio file. (There's nothing inside, just ext3 partition with empty recovery folder)
Click to expand...
Click to collapse
So if i just push this File, my phone will still work normally? Or would i have to Flash another Radio? could this throw me of the OTA-path? I am in gsm btw
Sent from my XT910 using XDA
It just get you to recovery.. It won't do nothing, because the empty_radio.img does'nt include any command., or any bp.img/lte.img... In my phone, It doing nothing harm, If you're worried just select the wipe cache option
whirleyes said:
It just get you to recovery.. It won't do nothing, because the empty_radio.img does'nt include any command., or any bp.img/lte.img... In my phone, It doing nothing harm, If you're worried just select the wipe cache option
Click to expand...
Click to collapse
Alright thanks mate,, can't wait to get rid of this problem
Edit:
Well the problem solved itself, though i am not quite sure how. i was using a walkie-talkie at work
and just happened to have my phone right next while talking at one point and when i wanted to turn on
the screen, nothing happened. it wouldn't power on at all, not even with the simulated battery-pull.
so i got my charger and when i plugged it in, the charging screen came up, without fastboot beforehand.
also it said my battery was at 5% when i was sure it was almost full just before. i powered up the phone,
again no fastboot-screen. when it was booted, the battery level was back to normal, but the date reset to 13.01.12
and time to 11:00. i put those right, and bam: everything was cool again. i reproduced this by pushing the talk button on
the walkie-talkie again with about 5cm distance to the phone and sure enough, the same thing happened, even the date/time reset.
so my phone is fine now. anyone care to elaborate how that might have worked?
doenis said:
Alright thanks mate,, can't wait to get rid of this problem
Click to expand...
Click to collapse
My friends 100% tested working fully
Thanks for this usefull post...
whirleyes said:
It just get you to recovery.. It won't do nothing, because the empty_radio.img does'nt include any command., or any bp.img/lte.img... In my phone, It doing nothing harm, If you're worried just select the wipe cache option
Click to expand...
Click to collapse
Thanks for your reply
Hi, Im having this trouble when I tried to flash my Motorola Droid razr but I dont have any idea of what to do in the pass 5 and futher so if anyone could explain this for noobs like me I wold be grateful.
eurt said:
Hi, Im having this trouble when I tried to flash my Motorola Droid razr but I dont have any idea of what to do in the pass 5 and futher so if anyone could explain this for noobs like me I wold be grateful.
Click to expand...
Click to collapse
please send more details...
i wait your reply...
hacker812c said:
please send more details...
i wait your reply...
Click to expand...
Click to collapse
Very usefull thanks
hacker812c said:
please send more details...
i wait your reply...
Click to expand...
Click to collapse
Well, the thing is I tried to flash my razr whit the version of Retail.BR (651.167.3370.XT910.Brasil.en.BR) and everything went just fine, after that I installed this blur version (Blur_Version.651.167.3370.XT910.Brasil.en.BR.zip) aka ICS. Everything ok in this point, after that I realized that my 3g dont work, so I tried to use the telcel stock version of this post http://forum.xda-developers.com/showthread.php?t=1624352 (actually Im using telcel) so when I tried this (very fool of my part) Im having this error whit RSD lite v5.7 "Failed flashing process. 6/22 flash cdt.bin "cdt.bin_signed" -> Phone returned FAIL." and my razr is showing this
AP Fastboot Flash mode (S)
0A.6C
To return to normal mode - first press power key to power down
Device is LOCKED, Statis Code: 0
Batery OK
OK to Program
Transfer Mode:
USB Conected
(Sorry for my lame english)
not sure if im doing this right but...
download empty radio file
put empty radio file in a folder on desktop
press volume keys + power
phone reboots
select ap fastboot
connect usb cable
type fastboot flash radio empty_radio.img
then i get an error 'fastboot is not recognised as an internal or external command, operable program or batch file.
any ideas?
thanks.
----
EDIT!
okay i got the file to transfer over.
then flashboot reboot
the screen turns off for 1 sec then turns back on to the ap fastboot screen with errors
has the normal info of ap fast boot screen and down the bottom
"invalid CG otv (CG: system): Invalid SP data
invalid cg version (CG: system)
invalid cg otv (cg:system)"
tried holding - volume and power to turn offf
then hold + - volume and power
and start up normal
but goes back to error screen.
invalid flash mode (S) (boot failure)
0a.6b
to return to normal mode - first press power key to power down
device is locked, status code: 0
battery ok
ok to program
transfer mode:
usb connected
"invalid CG otv (CG: system): Invalid SP data
invalid cg version (CG: system)
invalid cg otv (cg:system)"
THAT DOESNT WORK BROTHER..!
m using XT910 GSM ASIA RETAIL
GB 2.3.6,,
help me..!
:silly::silly:
Same problem here to. got the Asian retail version. Can flash any Original roms using RSD lite and not sure how to do this method too.
aboutryan said:
Same problem here to. got the Asian retail version. Can flash any Original roms using RSD lite and not sure how to do this method too.
Click to expand...
Click to collapse
Man u need to install ics eu 4.0.4(fastboot) with rsd.
I solved it through this process..
hit thanks if it works for you..
Sent from my XT910 using xda app-developers app
I completed everything. When I use RSD Lite 5.6 to flash, it stop in process 6
"Failed flashing process. 6/22 flash cdt.bin "cdt.bin_signed" -> Phone returned FAIL"
Any idea?
Try charging your phone to over 90% before trying. I had a similar issue but it went through after trying it after charging the phone.
Sent from my XT910 using xda app-developers app
Hi,
I was on last gsmleak ICS :
- Blur_Version.651.167.26.XT910.Retail.en.EU_2
Battery draining too fast so i reboot in recovery and wipe to factory (bad idea) --> phone never boot anymore
Now i can just access to apfastboot and recovery
But i when i try to connect my phone to pc in AP FASTBOOT nothing can be detected on pc so RSD can't work and fla**** with adb same "no device found" ... (i tried another pc same pb, install again drivers no change)
I tried to put the phone on BP SBF FLASH my pc detect and install drivers but rsd can back to APFAST and flash xml
I tried to flash in recovery again the Blur_Version.651.167.26.XT910.Retail.en.EU_2 but there is error when it verify
assert failed ... kindle.apk (freezed with titanium)
ap fast boot info : 0A.74 device is locked Status Code : 0
Battery Ok Ok to program Connect USB Data Cable
So now i have no solution if anyone can help ... maybe another way to flash something or a file to use with recovery ?
t.y
No help
i tried to flash again the last ota, but there is error because i disabled some apps with titanium like kindle.apk
is there a way to flash this ota wo verify check ???
http://forum.xda-developers.com/showthread.php?p=26915046
Follow Post Nr. 6 (T-Mo to Retail)
Sent from my XT910 using Tapatalk 2
I can t my ap fast boot mod seem to be unavailable, pc don t detect the phone when it s connect
So i cant use rds and adb cmd :/
tel is not detect on pc (i tried different pc cable and drivers without success)
So no idea?
gonna send it to sav but i have got doubts :/
same problem here.. no solution still.
No solution i confirm, i send it to an official moto repair but when i read their check i refused to pay for it :
- motherboard replacement
- speaker and screen have to be change
- and flash
= +140€
and i have to pay +27€ to get back my phone
i m gonna send it to another repair we ll see
http://www.youtube.com/watch?v=WBySMO8n1r4
have u tired ths link??
Ok so apparently I flashed a the kitchen sink rom and when phone booted up it stop and said fail to boot 2 but I flashed the and files in the video from qbking77 and now it says fail to boot 4 can anybody help me please. It the only phone I got and I'm not available for an upgrade till february
Robert5686 said:
Ok so apparently I flashed a the kitchen sink rom and when phone booted up it stop and said fail to boot 2 but I flashed the and files in the video from qbking77 and now it says fail to boot 4 can anybody help me please. It the only phone I got and I'm not available for an upgrade till february
Click to expand...
Click to collapse
What version soft ware did you start with.
the android version ? i was running on 2.3.5 it first said fail to boot 2 and thn after i flashed the sbf file it went to boot 4 do u know how i can fix this
Robert5686 said:
the android version ? i was running on 2.3.5 it first said fail to boot 2 and thn after i flashed the sbf file it went to boot 4 do u know how i can fix this
Click to expand...
Click to collapse
You can't flash custom ROMs with a locked bootloader
Sent from my MB855 using xda app-developers app
Yeah i didnt know that but idk y does the bootloader have to be unlocked cuz i flashed the beats audio one and didnt do this
What sbf did you flash?
Sent from my MB855 using xda app-developers app
mof9336 said:
What sbf did you flash?
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Also having the same issue, I just got root, and I tried to install Jellybean from Jokersax with my battery at 5% which was dumb, but anyways now I get failed to boot 4, I can get it into fastboot protocol support, or rsd mode, and that's it, I've tried to flash some stock files, but no good, I also have a locked bootloader & am on 2.3.5
i flashed the one from qbking77 video i only flashed the one and my batery was drained cuz it wasnt full but the proccess said succes but it went to fail to boot 4 and now it says battery to low to flash but i can get a new battery real quick i jux need to know wat sbf file to flash do u know any that i can flash and would work like i said its the only phone i have and im not available for an upgrade till later and i need my phone
Failed to boot 4 Starting RSD Mode
The Story:
I started having issues with the phone becoming slower and slower and crash prone so i figured this would be a good time to flash an alternate rom. I have had root for some time and i unlocked the boot loader probably about two weeks ago. I had tried a few roms by Th3Bill and i kept having issues so i thought id try to re-lock the boot loader as i couldn't flash any of his roms even with is recovery in place to see if unlocking it again would solve my issue. Also i was running 2.3.4 NOT 2.3.5 so it wasn't due to that.
I just followed the steps outlined here from Link:
Relocking without Full SBF flash
Factory reset phone Menu/Settings/Privacy/Factory Data Reset DO NOT SKIP THIS STEP
Reboot phone into fastboot mode: VOL down/Power. Use VOL down to scroll though options til you see "fastboot" then VOL up to enable. and connect phone to computer
Open command prompt in the moto-fastboot folder and type the following using the <enter> key after each command:
moto-fastboot devices
moto-fastboot erase recovery
moto-fastboot flash recovery stock_recovery.smg
moto-fastboot reboot
Disconnect phone from computer
Start RSD Lite on your computer
Reboot phone into RSD mode: VOL down/Power. Use VOL down to scroll though options til you see "RSD" then VOL up to enable.
Connect phone to computer.
Flash nopudding4u.sbf.
Close RSD Lite and disconnect phone.
Reboot phone
Once i completed the Flash nopuding4u.sbf step it failed giving the status: "Failed flashing process. Failed Flashing process. Phone[0000]: THe "Secure_Motorola_Flash" Interface could not be found. The super-file is secure and for re-flash; the phone needs a super-file that is not secureand not for reflash. (0x7066);Phone connec"
It is not just booting to the first Motorola Dual Core Technology splash screen and showing:
Failed to boot 4
Starting RSD Mode
I've been looking for a solution to the issue for about 30 minutes and have found nothing helpful.
Nopudding4u.sbf relocks your phone, however I would recommend using the 198_7.sbf file instead. U can still unlock with pudding.sbf but you will be able to get back running.. after u flash the stock sbf u will probably need to go into recovery and do a factory reset.
Sent from my MB855 using xda app-developers app
Did you fix,
Tempest_Inc said:
The Story:
I started having issues with the phone becoming slower and slower and crash prone so i figured this would be a good time to flash an alternate rom. I have had root for some time and i unlocked the boot loader probably about two weeks ago. I had tried a few roms by Th3Bill and i kept having issues so i thought id try to re-lock the boot loader as i couldn't flash any of his roms even with is recovery in place to see if unlocking it again would solve my issue. Also i was running 2.3.4 NOT 2.3.5 so it wasn't due to that.
I just followed the steps outlined here from Link:
Relocking without Full SBF flash
Factory reset phone Menu/Settings/Privacy/Factory Data Reset DO NOT SKIP THIS STEP
Reboot phone into fastboot mode: VOL down/Power. Use VOL down to scroll though options til you see "fastboot" then VOL up to enable. and connect phone to computer
Open command prompt in the moto-fastboot folder and type the following using the <enter> key after each command:
moto-fastboot devices
moto-fastboot erase recovery
moto-fastboot flash recovery stock_recovery.smg
moto-fastboot reboot
Disconnect phone from computer
Start RSD Lite on your computer
Reboot phone into RSD mode: VOL down/Power. Use VOL down to scroll though options til you see "RSD" then VOL up to enable.
Connect phone to computer.
Flash nopudding4u.sbf.
Close RSD Lite and disconnect phone.
Reboot phone
Once i completed the Flash nopuding4u.sbf step it failed giving the status: "Failed flashing process. Failed Flashing process. Phone[0000]: THe "Secure_Motorola_Flash" Interface could not be found. The super-file is secure and for re-flash; the phone needs a super-file that is not secureand not for reflash. (0x7066);Phone connec"
It is not just booting to the first Motorola Dual Core Technology splash screen and showing:
Failed to boot 4
Starting RSD Mode
I've been looking for a solution to the issue for about 30 minutes and have found nothing helpful.
Click to expand...
Click to collapse
Hello, did you fix your phone. i am in the same issue now.. please guide me or help me to fix the phone.I have been trying for 3 days,, thanks.
Tried to flash MIUI without unlocking the bootloader
keljoe2804 said:
Also having the same issue, I just got root, and I tried to install Jellybean from Jokersax with my battery at 5% which was dumb, but anyways now I get failed to boot 4, I can get it into fastboot protocol support, or rsd mode, and that's it, I've tried to flash some stock files, but no good, I also have a locked bootloader & am on 2.3.5
Click to expand...
Click to collapse
It is was initially stuck on failed to boot 2 and Starting RSD mode. Then I used RSD lite to flash the stock sbf, and my computer went to sleep in the middle of the flash and failed. Now it is stuck on Failed to boot 4, Starting RSD mode, Battery is too low to flash.
I am not in the US right now, so cannot take it to the Sprint store. PLEASE HELP!!!
On the Phone
"AP Fastboot Mode (S) (Flash Failure)
0A.77
eMMC Info:Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED, Status Code: 0
Battery, OK
OK to Program
Transfer Mode:
USB Connected"
no matter what I do it will only boot up to here.
I was able to get into recovery and reinstall the Jellybean update from external
if finished no errors but when rebooted right back to AP fastboot screen
Help Please
Kens Inc said:
On the Phone
"AP Fastboot Mode (S) (Flash Failure)
0A.77
eMMC Info:Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED, Status Code: 0
Battery, OK
OK to Program
Transfer Mode:
USB Connected"
no matter what I do it will only boot up to here.
I was able to get into recovery and reinstall the Jellybean update from external
if finished no errors but when rebooted right back to AP fastboot screen
Help Please
Click to expand...
Click to collapse
If Battery is OK, use Razr Utility 1.82 to unbrick it.
If Battery is Low:
You need to buy a Motorola Factory Cable. They are very cheap. I had to buy one as well, and it fixed my Razr in Boot Failure.
Buy one here: http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40
*Make sure it's the right cord for your device (XT910)* DO NOT BUY FROM CHINA!! (I have had bad experience)
How to use it: http://www.usbstyle.com/cables/motor...nbrick-rooted/
(Scroll down for instructions)
No need to use RSD Lite, just use Razr Utility 1.82!
Download here: http://rootzwiki.com/topic/37761-dro...odels-windows/
Hope I helped!
Trying to flash stock XT912 MAXX with Matt's 2/1/13 package. I choose "1 Flash Official Jellybean Firmware (Wipe Data)". It is hanging after the first reboot. (image attached).
Phone says:
AP Fastboot Flash Mode (S)
0A.77
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Transfer Mode:
USB Connected
Desktop is running Windows 7 x64.
Please help.
Problem solved. I tried turning off all startup programs on the PC. This time It got to the second reboot and hung.
I switched to a different PC and it sailed through. All set. :victory: