Hey guys...
does setcpu prevent the phone from getting into deep sleep mode? i deleted setcpu and tried it with no-frills cpu control and the deep sleep mode worked but on setcpu it didn't work... is it because of the "Screen off" profile?
Oh forgot to say that i'm using Spawk ROM and munjenis custom kernel.
Nope. I always use it. It's fine
Sent from my Jellybean Xperia S
Even with the profile for screen off? i had it on 200/200... maybe it was something else that didn't work thank you
Nope. I have a screen off profile and have never had problems
Sent from my Jellybean Xperia S
Related
Sorry if this has been asked before, but im currently on wolfbreak's TW 8.1 with Zkernel, i know theres underclock to 128MHZ but when i use cpu spy, i can see that most of the time its either at 1113 mhz or at 128mhz.
Am i not suppose to see deep sleep anymore? Is this due to the kernel or i have some application on affecting my phones deep sleep.
okay please close this topic i just found the solution to my problem... forgot to disable automatic time update..
Hello
My galaxy s2 doesnt wake up after put in to sleep mode, back n menu keys light up but no haptic feedback, while screen is on, no problems at all. please help me as ive tried wiping, reflashing different roms, trying multiple kernels and setting clock frequencies to always be on 1,2 ghz.
You must have something installed, like SetCPU and the phone goes below 200 MHz in powersave mode.
To all,
Please don't play with underclock/undervolt/overclock stuffs too much, it can damage the device big time. This is a phone for gods sake, keep playing with Sandy Bridge CPU's, they will take your tortures.
Regards.
I do have SetCPU installed, though i haven't touched the frequencies or voltages until after this problem which was when I put the frequencies to 1,2 gHz as lowest and highest. I have discovered another problem where TW launcher gets FC as soon as I touch the screen. Will try to uninstall SetCPU if I get the oppertunity.
wipe and then install cognition s2, its a modem rom and kernel all in one so you'll have no problems. then once its installed don't install setcpu
Sent from my GT-I9100 using XDA Premium App
Thank for your reply and all your help, I was insecure about custom roms so i installed stock rom amd it turned out great
As stated in the title. Im using doomkernel v5 on stock. CPUspy indicates only 998mhz. Is it normal?
I don't know about other frequencies, but the phone doesn't go into deep sleep while charging. Unplug the phone, let it sit with screen off for a minute or two, then go check CPU Spy again and refreshing wouldn't hurt.
I'm using TW v5c with Doomkernal overclock and CPUSpy is telling me I'm only using 998 MHz??
Swyped on my TW v5 2.3.3 X10i
From what I understand, Doomkernel v5 by default boots up at 998, unless you have SetCPU set to overclock it on boot. Boots up in a safe state by default, you can tweak it from there with setcpu.
i managed to get it to charge at 245mhz after restarting my phone.
i found out that the official facebook app cos the phone to not go into deep sleep normally. just go to applications and close the facebook running process.
Hi guys,
I am currently on Checkrom v4 with darky kernel. Most of the time, when i open the phone from a sleep state or screen of state, the screen will not respond to unlock gesture. I have to turn the unit off for at least 2 times before the screen would eventually respond. Sometimes, when turn it of again, the will just turn black but with button lights open. Then after i turn it off again, the screen will eventually light up and respond.
I also have experience this with other samsung roms such as criskelo, batista which is why i always flash back to Cm7 wherein I don't experience this. BTW, i also dont seem to remember experiencing this on CM9... your thoughts would be appreciated... TIA
yeah buddie.i am facing the excact the same problem.............
dont know how to get rid of this........
Maybe it's kernel related?
Sent from my GT-I9100 using xda premium
Happens to me too with Siyah 2.6.11.
Maybe it's undervolting.
Sent from my GT-I9100 using XDA App
This used to happen to me when I had a screen off profile enabled on SetCPU. If you're using SetCPU, try disabling it to see if that solves the problem.
I think i've found out what's causing this... it's the touch screen tune app... after.I removed this, it seems to be not freezing upon wake up of the device... HTH
Sent from my GT-I9100 using XDA Premium App
What govenor are you using?
I'm new to the SGS2. Coming from my old SGS1 running ICS I couldnt go back to gingerbread.
Leaked ICS on SGS2= No custom kernels BUT!...
With root access and NS tools app you can tweak stock "Ondemand" govenor. Its at 100000micro seconds which is 10th of a second stock sampling rate. This is SLOW. Couple with waking from sleep and known On-demand delay issues I think this might be the culprit... Cant wait for sources
Hi, don't now if this is the right section for this question but I installed Jelly King Cm10 the other day and it's a great rom, had no FC or anthing apart from when i go to sleep around 11ish and phone is in deep sleep i wake up aroung 6ish and go to wake the phone up it's turned it self off so i have to use the power button to switch it on. I'm sure I saw something about when to mae the idle like, day, night etc but can't find it or was that on another rom i'd been using, great rom but can someone please help on this issue, thanks:good:
erasure1969 said:
Hi, don't now if this is the right section for this question but I installed Jelly King Cm10 the other day and it's a great rom, had no FC or anthing apart from when i go to sleep around 11ish and phone is in deep sleep i wake up aroung 6ish and go to wake the phone up it's turned it self off so i have to use the power button to switch it on. I'm sure I saw something about when to mae the idle like, day, night etc but can't find it or was that on another rom i'd been using, great rom but can someone please help on this issue, thanks:good:
Click to expand...
Click to collapse
what ur experiencing is SOD(sleep of Death), u can change ur kernel to Siyah v4.1.2 and see
I had similar problem on CM10 experimental (20120825). When I woke up the phone was turned off, but I couldn't turn it on. I found that the battery discharged to 0%. >.<
Now, I'm on stock.
erasure1969 said:
Hi, don't now if this is the right section for this question but I installed Jelly King Cm10 the other day and it's a great rom, had no FC or anthing apart from when i go to sleep around 11ish and phone is in deep sleep i wake up aroung 6ish and go to wake the phone up it's turned it self off so i have to use the power button to switch it on. I'm sure I saw something about when to mae the idle like, day, night etc but can't find it or was that on another rom i'd been using, great rom but can someone please help on this issue, thanks:good:
Click to expand...
Click to collapse
that's Sleep of Death bro. Flash another kernel, and don't mess what you don't understand
Swyped from Samsung Galaxy SII
Sleep of death!
I was on siyah 4.0.1 and it happened using that now i'm on Dorimanx v5.70 and the same this moring, Extweaks = default cpu governor: lulzactiveq, Deep-sleep cpu governor = ondemand.
I now it's not a real problem and the roms fine but just thinking it's the sgs2!
Thanks guys
erasure1969 said:
I was on siyah 4.0.1 and it happened using that now i'm on Dorimanx v5.70 and the same this moring, Extweaks = default cpu governor: lulzactiveq, Deep-sleep cpu governor = ondemand.
I now it's not a real problem and the roms fine but just thinking it's the sgs2!
Thanks guys
Click to expand...
Click to collapse
Luzactive as default governer unless tweaked properly might cause issue's, try the default "pegasusq' governer by resetting the extweak profile once and see
Sun90 said:
Luzactive as default governer unless tweaked properly might cause issue's, try the default "pegasusq' governer by resetting the extweak profile once and see
Click to expand...
Click to collapse
Ok Sun90 done that thanks, but the first time it happened using siyah that battery was dead in the morning and using Dorimanx the juice was 100% but phone was off, didn't have to take the battery out just used the power buttong to get it on
change kernel and restore default option for exTweaks using clokworkmod
vitalianoleone said:
change kernel and restore default option for exTweaks using clokworkmod
Click to expand...
Click to collapse
I've reset Extweaks in clockwork, cleared cache etc, Governor = HYPER and Deep-sleep, ondemand
no problems with jelly king 1.5
Hello Everybody.
So this is one of rare place where i can post to tell everyone who use this ROM that it's works like a charm in my S2 with Siyah 4.1.4 Modem XXLPX.
sources i use to :
http://forum.xda-developers.com/showpost.php?p=31218484&postcount=436
Extweaks from
http://forum.xda-developers.com/showthread.php?t=1875573
and
http://forum.xda-developers.com/showpost.php?p=31202456&postcount=1752
have a look for services.jar optimized :
http://forum.xda-developers.com/showthread.php?t=1869663
and
http://forum.xda-developers.com/showthread.php?t=1617219
I only want to share my experience ans perhaps help....
Hope this help too.
les fautes ? i'm French . c'est pour ça.
Whoaaaa V 1.6.2 is just MAGNIFIQUE !
http://imageshack.us/a/img24/9696/jellykingv162.jpg