I have one Galalxy s3 I9300 no working I try software on odine but flashing fail see this log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
make sure things like usb debugging are on in the dev options.
aboody712 said:
I have one Galalxy s3 I9300 no working I try software on odine but flashing fail see this log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Q1. Why are you re-partioning your device?
Q2. If you are re-partitioning then are you using the 3 file method with mx.pit?
Q3. Have you tried different USB ports, cables, restarting your PC etc.?
I triad 3 flies with pit file same problem
zoot1 said:
Q1. Why are you re-partioning your device?
Q2. If you are re-partitioning then are you using the 3 file method with mx.pit?
Q3. Have you tried different USB ports, cables, restarting your PC etc.?
Click to expand...
Click to collapse
I triad 3 flies with pit file same problem
I second trying different USB ports. XXELLA took about 15 attempts before it passed for me
Sent from my GT-I9300 using xda app-developers app
Your phone is bricked. Most likely by the same thing which is causing the Sudden Death where it can't even reach Download mode. Take it to a Samsung Service centre to be repaired, and remember you've never heard of rooting, flashing, download mode, custom roms. You only know about XDA because a Google Search lead you to pages and pages of broken phones.
yess...your phone is bricked..same like mine last month..I sent to samsung centre..they change motherboard...
Related
Hi folks
i have an i9300 international version, no contract, and it just bricked overnight
it was rooted and with cmw flashed... i'm not sure, but maybe overnight it has received the 4.1.2 update and didn't boot since.
I've tried flashing a stock rom with odin3 v3.04 and i got this:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELL4_I9300OXAELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
After some research i came up with this thread: http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
and tried it too:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAELL4_566833_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I think it's time to call warranty, am I right?
in download mode it shows:
Odin Mode
Product name: (nothing displayed here)
custom binary download: No
current binary: Samsung Official
System Status: Custom
will it be a problem if i send my phone to samsung?
Or is there anything else I can do?
atcasanova said:
Hi folks
i have an i9300 international version, no contract, and it just bricked overnight
it was rooted and with cmw flashed... i'm not sure, but maybe overnight it has received the 4.1.2 update and didn't boot since.
I've tried flashing a stock rom with odin3 v3.04 and i got this:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELL4_I9300OXAELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
After some research i came up with this thread: http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
and tried it too:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAELL4_566833_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I think it's time to call warranty, am I right?
in download mode it shows:
Odin Mode
Product name: (nothing displayed here)
custom binary download: No
current binary: Samsung Official
System Status: Custom
will it be a problem if i send my phone to samsung?
Or is there anything else I can do?
Click to expand...
Click to collapse
"System status: Custom"
They might annoy you because of that a little bit, don't give up just annoy them and stick there all day till they accept it.
They mostly won't notice.
see http://forum.xda-developers.com/showthread.php?t=1993044
so we're sure that I can't fix my SIII from my computer, and should take it to samsung?
Its a question = Q&A
Instead of messing with sammobile firmware flash stock from XDA or use CHECKFUS to download .
jje
Hi guys!
My i9300 does not boot and instead keeps displaying the samsung logo. It doesn't enter the recovery mode either, but does enter the download mode. So I tried flashing 2 different official ROMs but I'm getting the error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the ROM here:
<tried posting a link but was not allowed>
Could you please help me with this problem?
Thanks in advance!
Try another version of odin, different lead, port or pc. Ensure kies is not running. Follow the guide on flashing to the letter.
Download the rom from sammobile and check the md5.
Sent from my GT-I9300 using Tapatalk
wicccked said:
Hi guys!
My i9300 does not boot and instead keeps displaying the samsung logo. It doesn't enter the recovery mode either, but does enter the download mode. So I tried flashing 2 different official ROMs but I'm getting the error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the ROM here:
<tried posting a link but was not allowed>
Could you please help me with this problem?
Thanks in advance!
Click to expand...
Click to collapse
I had a similar issue a while ago but it turned out to be an issue with the Kernel not being compatable with the Rom I flashed. I thought I had bricked it, until I flashed a stock kernal first then the stock ROM and it fixed it for me and it really does sound like you have the same issue, As for the rom not flashing its most likely a bad download try sammobile! let me know if it was the kernal!
jaggythistle said:
I had a similar issue a while ago but it turned out to be an issue with the Kernel not being compatable with the Rom I flashed. I thought I had bricked it, until I flashed a stock kernal first then the stock ROM and it fixed it for me and it really does sound like you have the same issue, As for the rom not flashing its most likely a bad download try sammobile! let me know if it was the kernal!
Click to expand...
Click to collapse
jaggythistle, thank you for the answer.
I downloaded the stock kernel, successfully flashed it, downloaded the matching ROM (1-file this time), but now when trying to flash I'm getting the following error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH3_I9300UBEMH1_I9300ECOEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
What can I do?
boomboomer, Thanks for the reply. I have checked it all, now I'm getting the above error.
If you've tried all the connection issues then it appears your recovery positron is corrupt and can't be written. A rescue firmware, including pit might help but otherwise you'll need a new motherboard.
Search in general forum for the rescue firmware thread, follow the instructions.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If you've tried all the connection issues then it appears your recovery positron is corrupt and can't be written. A rescue firmware, including pit might help but otherwise you'll need a new motherboard.
Search in general forum for the rescue firmware thread, follow the instructions.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I have tried the rescue firmware and got the following error:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
PIT damaged new motherboard .
You can search for this thread where a claim was made to fix pit .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
Worth trying before buying a new motherboard as you have no warranty .
JJEgan said:
PIT damaged new motherboard .
You can search for this thread where a claim was made to fix pit .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
Worth trying before buying a new motherboard as you have no warranty .
Click to expand...
Click to collapse
Tried it, Odin was hanging at the "Erase..." step for ~5-10 mins, then I got the error:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi XDA.
I've been trying to search for solutions to my problem, but I really can't seem to find any. If a thread similar to mine exists already, I am sorry.
Today i tried flashing a LiquidSmooth 4.4.4 ROM to my device, but the install of the ROM gives an error (Status 7). Now the phone is stuck in a bootloop.
Now I am trying to flash stock ROM with Odin 3.07 but none of the .tar-files I've been trying will work. I have also tried to install TWRP Recovery through ODIN just now, but it fails every time. I can't seem to figure out what to do now.
Hope you guys can help me. Thanks in advance!
This is what ODIN writes when trying to flash the stock ROM.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_L710VPUCMK3_L710SPRCMK3_2034598_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: When I try to boot up the device just with the power button it now shows white static noise all over the screen. I am in a panic right now, as I don't have the money to buy a new phone. I am afraid I have stupidly installed some kind of bootchain made for a Verizon S3 instead of the International version like mine.
EmilBakke said:
This is what ODIN writes when trying to flash the stock ROM.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_L710VPUCMK3_L710SPRCMK3_2034598_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
That's the Galaxy S3 L710 not S3 I9300. Either you are flashing the wrong firmware or your in the wrong forum >> http://forum.xda-developers.com/galaxy-s3-sprint <<
tallman43 said:
That's the Galaxy S3 L710 not S3 I9300. Either you are flashing the wrong firmware or your in the wrong forum >> http://forum.xda-developers.com/galaxy-s3-sprint <<
Click to expand...
Click to collapse
Well I surely am an idiot. Thank you so much, it works fine now! Have a nice day.
white screen cant use odin its fail only can load download mode GT-I9300
odin 3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK7_I9300OJKGNB1_I9300JKUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
odin 1.85
STUCK AT
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK7_I9300OJKGNB1_I9300JKUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
OR
odin 1.85
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK7_I9300OJKGNB1_I9300JKUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Untick repartition, tick "one package". If you already did that you may need to elaborate a little on what you've done to it.
Sent from my HTC One M9 using Tapatalk
shivadow said:
Untick repartition, tick "one package". If you already did that you may need to elaborate a little on what you've done to it.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
i got the phone from friend i dont sure if he checked re pratition or not I didn't
In that case i can tell you that the nand is dead. You can try flashing a .pit file via odin but i doubt it will do anything except fail to flash.
Sent from my HTC One M9 using Tapatalk
shivadow said:
In that case i can tell you that the nand is dead. You can try flashing a .pit file via odin but i doubt it will do anything except fail to flash.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
It's failing to flash even the pit is there anything I can do? A
Yes plenty to do. It depends on how creative you are.. I'd find some way to detonate it but throwing it in the bin is advised. It's broken beyond repair.
Sent from my HTC One M9 using Tapatalk
Hi there,
My phone currently is soft brick
i'm trying to install/flash Stock Rom 4.1.2 via Odin
and it's not working at all, i searched all over XDA Dev Forums and i thought it was the pit file issue so i got the pit for the SIII
and it does the following
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm sure that my device is connected properly and i'm using the latest odin version 3.10.7 (used other versions though and didn't work either )
and i tried just flashing via odin and this is what happens:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGND5_I9300VGFGNE1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any Help please
Use another cable or port, don't use usb hubs, make sure Kies is not running in task manager and drivers are properly installed.
Also why would you downgrade to 4.1.2...
It's bad if you don't have the correct bootloader
Sent from my HTC 10 using Tapatalk