Hi there,
My phone currently is soft brick
i'm trying to install/flash Stock Rom 4.1.2 via Odin
and it's not working at all, i searched all over XDA Dev Forums and i thought it was the pit file issue so i got the pit for the SIII
and it does the following
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm sure that my device is connected properly and i'm using the latest odin version 3.10.7 (used other versions though and didn't work either )
and i tried just flashing via odin and this is what happens:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGND5_I9300VGFGNE1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any Help please
Use another cable or port, don't use usb hubs, make sure Kies is not running in task manager and drivers are properly installed.
Also why would you downgrade to 4.1.2...
It's bad if you don't have the correct bootloader
Sent from my HTC 10 using Tapatalk
Related
I can not flashing by CWM and not by Odin, Odin is looking for and can not find the device, recognizes only in version 1.85
Have the drivers installed? I rather have the Samsung Drive Kies and indeed when I use the Kies I close all open applications Kies.
Odin lowered correct? I downloaded but
If you are on Windows 7, you're running as admin? Yes I am.
She used. Pit? Yes, what I'm using the PIT is totoro.pit
When tightening mount / system appears: Error mounting /system!
and when tightening Mount USB appears: E: Unable to open lunfile (No such file or directory)
When I put the ROM with the PIT appears:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iBGLB3_S5830iXECLB1_S5830iXXLB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And it is not out ...
I tried again and got:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iBGLB3_S5830iXECLB1_S5830iXXLB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try this one with the .pit file.Tell me what happened.
PS:Your phone is s5830i I guess.Don't flash CWM or any ROM for s5830!It will damage your phone!
I have one Galalxy s3 I9300 no working I try software on odine but flashing fail see this log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
make sure things like usb debugging are on in the dev options.
aboody712 said:
I have one Galalxy s3 I9300 no working I try software on odine but flashing fail see this log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Q1. Why are you re-partioning your device?
Q2. If you are re-partitioning then are you using the 3 file method with mx.pit?
Q3. Have you tried different USB ports, cables, restarting your PC etc.?
I triad 3 flies with pit file same problem
zoot1 said:
Q1. Why are you re-partioning your device?
Q2. If you are re-partitioning then are you using the 3 file method with mx.pit?
Q3. Have you tried different USB ports, cables, restarting your PC etc.?
Click to expand...
Click to collapse
I triad 3 flies with pit file same problem
I second trying different USB ports. XXELLA took about 15 attempts before it passed for me
Sent from my GT-I9300 using xda app-developers app
Your phone is bricked. Most likely by the same thing which is causing the Sudden Death where it can't even reach Download mode. Take it to a Samsung Service centre to be repaired, and remember you've never heard of rooting, flashing, download mode, custom roms. You only know about XDA because a Google Search lead you to pages and pages of broken phones.
yess...your phone is bricked..same like mine last month..I sent to samsung centre..they change motherboard...
i was trying to install jellyblast in my phone. the rom got installed. but when i tried restarting the phone, it got ricked.
i am trying to use odin but it comes as
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iODDLD2_RST_S5830iDDLD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i dont know what to do. please help
First of all Wrong Section.I understand you are new,but post in the appropriate section.
Try using Odin v3.07 or refer this guide http://forum.xda-developers.com/showthread.php?t=1840645
Sent from my GT-S5830i using xda app-developers app
Hey my Galaxy Tab 10.1 isn't booting.
I've tried to restore the original firmware using Odin but it's failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7510JKLP3_P7510ILOLP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Someone knows what's wrong?
Try to run the Odin again.
Sent from my GT-I9305 using XDA Premium 4 mobile app
Hi XDA.
I've been trying to search for solutions to my problem, but I really can't seem to find any. If a thread similar to mine exists already, I am sorry.
Today i tried flashing a LiquidSmooth 4.4.4 ROM to my device, but the install of the ROM gives an error (Status 7). Now the phone is stuck in a bootloop.
Now I am trying to flash stock ROM with Odin 3.07 but none of the .tar-files I've been trying will work. I have also tried to install TWRP Recovery through ODIN just now, but it fails every time. I can't seem to figure out what to do now.
Hope you guys can help me. Thanks in advance!
This is what ODIN writes when trying to flash the stock ROM.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_L710VPUCMK3_L710SPRCMK3_2034598_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: When I try to boot up the device just with the power button it now shows white static noise all over the screen. I am in a panic right now, as I don't have the money to buy a new phone. I am afraid I have stupidly installed some kind of bootchain made for a Verizon S3 instead of the International version like mine.
EmilBakke said:
This is what ODIN writes when trying to flash the stock ROM.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_L710VPUCMK3_L710SPRCMK3_2034598_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
That's the Galaxy S3 L710 not S3 I9300. Either you are flashing the wrong firmware or your in the wrong forum >> http://forum.xda-developers.com/galaxy-s3-sprint <<
tallman43 said:
That's the Galaxy S3 L710 not S3 I9300. Either you are flashing the wrong firmware or your in the wrong forum >> http://forum.xda-developers.com/galaxy-s3-sprint <<
Click to expand...
Click to collapse
Well I surely am an idiot. Thank you so much, it works fine now! Have a nice day.