Related
Hi,
Am looking for a good rom (jellybean pref) for ICOO D70 PRO 7'' Tablet PC Dual Core Rockchip RK3066 8GB 1.6GHz Android 4.0
It's a Chinese tablet.. what do you recommend?
Thanks,
Pizu
need more info. What is your ROM now? I just got my D70proII 2 days ago, it is running 4.1.1 ROM 20121220. Did you check the official icoo site, http://soft.aoicoo.com/soft/list.asp?classid=1?
bun
icoo d70 pro 2 getting stuck in bootscreen
I am a noob in this forum.Looking for helpful answers but am yet to find one
I got coo d70 pro2 tablet . The problem is that the tablet won't move past the boot screen (It is stuck there).
I tried to flash rom using LiveSuit but it didn't work out (it says image file invalid)
Any suggestions ?
You download the upgrade package from the official website, inside there is upgrade instructions, choose English to change to english, They recommend to use RKBatchtool to flash upgrade, I am NOT familiar with using livesuite for rk3066 chips. Maybe some othre guru can jump in.
Hope this helps,
bun
bunanson said:
You download the upgrade package from the official website, inside there is upgrade instructions, choose English to change to english, They recommend to use RKBatchtool to flash upgrade, I am NOT familiar with using livesuite for rk3066 chips. Maybe some othre guru can jump in.
Hope this helps,
bun
Click to expand...
Click to collapse
Finally got the tab working.The tablet was entering into recovery mode but to flash it you need it to get into flash mode (Press Volume+ nad power button for sometime and your screen will go blank.However RKBatchtool will show a green dot on "Connected Devices"). Then just the image file downloaded from official site and you are good to go.Also check drivers (you need to install them while in recovery mode)
arnab_sarkar_1988 said:
Finally got the tab working.The tablet was entering into recovery mode but to flash it you need it to get into flash mode (Press Volume+ nad power button for sometime and your screen will go blank.However RKBatchtool will show a green dot on "Connected Devices"). Then just the image file downloaded from official site and you are good to go.Also check drivers (you need to install them while in recovery mode)
Click to expand...
Click to collapse
Glad to see u got it fixed. enjoy,
bun
I've got ICOO D70PRO II and after a couple of minutes using it the screen went full white and wont come normal... The system is working as when i press on screen I am recieveing feedback but the only problem is I cant see the image.. Any help? Already tried reflasning and checking flat cables but none helped..:crying:
I'm new to this forum and i'm from germany. So i hope this post is in the right category. And sorry, if my englisch is not so good. I only had englisch at school 10 jears ago.
You can see in the link below my phone from china.
http://www.cect-shop.com/de/android-note-n7100-silbergrau.html#.UZYNJkqndze
I try to root it as described here: http://forum.xda-developers.com/showthread.php?t=2247537
The script rooted the phone successfully. But after a while the phone begins to start new and stucks on a bootloop. I searched a new fimware. Finally i found some on needrom.com. But i found not the 100% same and so i tried to Flash with te SP Flash Tool. (Please don't beat me!) With most Firmwares, the phone doesn't start or the screen doesn't display something. With a Firmware from Star N7100 the phone starts and i see everything on the display. But the home-, menu- and volume down buttons won't work.
Can someone help me to get the right firmware?
edit:
I've tried a long time. Finally i installed the firmware from the star s7189. The phone seems to work, but the screen is pixelated (i hope it is the right word, i used google to translate). I think, the system is the same, but the screen had a other resolution. Maybe thats the problem. The Star is at 854x480. My phone is at 960x540.
OK, i tried many times, many firmwares. I found 2 firmwares, they are nearly perfect. In one are the right camera drivers, in the other are the right display drivers. I have to make this in one uboot. Please, help me.
The second problem are the Buttons. In any firmware are problems with the hardware keys (Volume up, Volume Down, Menu, Home, Back). Here i need help too.
Hi,
Why didn't you just buy a N700 or an I9300? Or an N7102/N7100?
Would just like to know.
I wished, i can buy a original N7100. But i don't had the money for it. So i buyed a clon from china for less money. In this state, the phone can only used as paperweight, damn! And the money is now shattered like the phone, damn²!
OK, i understand. XDA doesn't support or develope for clone devices.
I don't want just the firmware for my device on a silver tray, i look for help to understand the android-system better.
I don't stop to search, before it won't work. So i found the MPai N7100 with the Quad-Core-Processor MTK6589. This phne looks exactly the same like mine. Now i will try this firmware, but i didn't found them.
you need to find this firmware e2001_v89_hydy_20130322
You say it! This firmware should be right. But i can't find them.
The newest firmware is e2001_v89_hydy_20130407. I can also use this. This are Android 4.2. The firmware you say is Android 4.1.
btw
I tried to flash the S7189 firmware and the boot.imb and uboot.bin files from the N7189 you explain in this thread here. http://forum.xda-developers.com/showthread.php?p=41221266 The Display was upside down and the keys won't work right.
I flashed the boot.img and the uboot.bin from the Star N7100. Now the display is right oriented, but the cam won't work and the problem with the keys continues.
@unrealbg
Is it possible to extract drivers from a uboot.bin? I asked, because i had 2 uboot files. In one are the right camera drivers, in the other are the right display drivers. I have to make this in one uboot.
An the second question is: Where can i edit the keys (vol up, vol down, back, home, menu)? I had problems in every firmware with the buttons. They don't register a push.
OK, now the ****ty phone is fully bricked.
I found a firmware for Star N7100 on needrom. I flashed it with SPM-Flashtool. I think, the preloader is flashed too. There was no way to disable the flash of these. The flash seems to be successfully. The bars went to 100% and it says DL OK. I tried to start it, but nothing works.
Ok i like to flash another firmware and load it into SPM. I clicked on Start and connect the phone. The windows sound for recognized device appears. Now only the red bar went to 100%. Then SPM says "No Bootrom USB port was found! COM16 is not a Bootrom (preloader) USB port."
I tried the same with the SP Flashtool. I loaded the firmware into SP, clicked on Start and connect the phone. The windows sound for recognized device appears. Now only the red bar went to 100% and SP says BROM_ERROR : S_FT_ENABLE_DRAM_FAIL (4032) Here i can deselect/select everything, so i only select the preloader. Same problem.
SP version: V3.1308.0.sn125
SPM version: V3.1034.00-A2013.02.26
try with this https://hotfile.com/dl/223954404/dfbdb2d/SP_Flash_Tool_v3.1312.0.139.7z.html <-- new version
btw i thik your phone is "M Pai N7100 Note 2"
you need to find boot.img from your original rom!
not try files from other firmware because it will screw up your phone!!!
Thanks,
I tried with your tool, but the error are almost the same. The red bar went to 100%, then 2-3 seconds and the Flashtool said:
SP FLASH TOOL ERROR: (8200)
My phone is certainly a MT6589! Flashtool recognizes the phone on COM16 as a MTK USB Port. The screenshots about the Flashtool and the error i attached.
edit
I don't have the 100% right firmware, but i flashed already before the firmware in the attached image (preloader too) and the phone at least starts.
saschljk said:
Thanks,
I tried with your tool, but the error are almost the same. The red bar went to 100%, then 2-3 seconds and the Flashtool said:
SP FLASH TOOL ERROR: (8200)
My phone is certainly a MT6589! Flashtool recognizes the phone on COM16 as a MTK USB Port. The screenshots about the Flashtool and the error i attached.
Click to expand...
Click to collapse
I uploaded a new version try it/ but you need to flash only firmware for your phone not other firmwares (link has been changed in the above post)
You are a King! Thank you very much!
With the new Flashtool it works with Firmware upgrade and the "wrong" firmwarefile. My dealer send me from china just now the right firmware. I'ts in the download. If it's finished, i will try and give the reply here.
edit
OK, the firmwarefile from my dealer is also not 100% the right. Its the right for the phone on his page i buy, but not the right for the phone he send to me. So i will go on... Thanks to your help, i can now go on.
I think, i only must only have the right uboot.
saschljk said:
You are a King! Thank you very much!
With the new Flashtool it works with Firmware upgrade and the "wrong" firmwarefile. My dealer send me from china just now the right firmware. I'ts in the download. If it's finished, i will try and give the reply here.
edit
OK, the firmwarefile from my dealer is also not 100% the right. Its the right for the phone on his page i buy, but not the right for the phone he send to me. So i will go on... Thanks to your help, i can now go on.
I think, i only must only have the right uboot.
Click to expand...
Click to collapse
you must select right drivers for your phone from uboot using SP_MDT
Oh dear,
in SP_MDT the boxes for selecting main sensor, sub sensor and lcd are empty.
I had only one uboot file from other device (Star N7189), where i can select anything. In these are the right main sensor and sub sensor drivers, but the wrong display drivers. The Display are upside down, but the touch sensors for display are in the right direction. Its magic!
I had another uboot file, in this are the right display driver, but the wrong main sensor and sub sensor drivers.
The uboot files, i will attach to this post.
I found some information in the logfile of MTK-Droid-Tools. The first time, i connect the phone, i recived this data:
Model : N7100
Build number : e2001_v89_hydy_20130322
Build date UTC : 20130322-060711
Android v : 4.2.1
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #2 SMP Sat Mar 23 15:41:41 CST 2013
saschljk said:
You are a King! Thank you very much!
My dealer send me from china just now the right firmware. I'ts in the download. If it's finished, i will try and give the reply here.
Click to expand...
Click to collapse
Can you send me this firmware?
Sorry for the late response. http://www.needrom.com/mobile/fly-n7100/ Here you can download the firmware.
Now i found the device i had and know what firmwarefile i need.
Here a Link of the device and specs: http://www.chinapadmall.com/mpai-n7100#.UaT-NUqndzc
And here a Video: http://www.youtube.com/watch?v=-FriO5G8pqk
I still search for this firmware. It#s very hard, to find the firmware. I cant belive, that i am the only one, who had this device. Nowhere a firmware to download.
But on my way, i am now one step further. I think, uboot-file are the key. I found 3 firmwares, wich come very close to my device.
First firmware (Star N7102): Right displaydrivers, but wrong cameradrivers and the buttons and sofkeys won't work right.
Second firmware (Star N7189): Right cameradrivers, but wrong displaydrivers and the buttons and sofkeys still won't work right.
Third firmware (MIZ Z6):Yes, the buttons and sofkeys work right. I hear it and think i see it in the pixelated display. I think you guessed it. Wrong
displaydrivers and wrong cameradrivers.
In my opinion, all drivers are in te uboot-file.
I need help!!!
I have Galaxy Note II (Chinese Copy)
1 microsim,
MT6577 QuadCore 1.6GHz
2GB Ram
8Mpx, 1,9Mpx front
Android: 4.1.1
Build number: JRO03C.N7100ZSALIA
Baseband version: N7100XXALIE
Kernel: 3.0.31-178067 SMP PREEMPT Wed May 29 14:21:02 CST 2013
My model have 12GB internal memory but 99% internal is full... WTF?! Plz help me
Galaxy Note 2 clone I7100 Firmware
Hello! Members,
I need Samsung Galaxy Note 2(China clone) Model GT- I7100.I installed Boot.img and recovery images files to this device.The device can't load boot.img I installed and stop android logo.So, I need this Firmware or boot.img file for this phone.Someone help me, please.
My Phone Information
Samsung Galaxy Note II (clone)
Model : I7100
Android Version : 4.0.3
Baseband Version : MTK6517
Kernel Version : 2.6.35.7
Software Version : W22.20_P20
Hardware Version 2.1.0
Hi i have a clone note 2 with single microsim.it was in boot loop condition but after i flashed it with a stock rom from needrom.com now its not even running on boot loop nor show charging i even tried to connect with pc bt just red light on notification light nothing els.pls help
need ROM
Kyawzin Tun said:
Hello! Members,
I need Samsung Galaxy Note 2(China clone) Model GT- I7100.I installed Boot.img and recovery images files to this device.The device can't load boot.img I installed and stop android logo.So, I need this Firmware or boot.img file for this phone.Someone help me, please.
My Phone Information
Samsung Galaxy Note II (clone)
Model : I7100
Android Version : 4.0.3
Baseband Version : MTK6517
Kernel Version : 2.6.35.7
Software Version : W22.20_P20
Hardware Version 2.1.0
Click to expand...
Click to collapse
hello i have this and is looping you got the ROM to flsh? pls
[ISSUE HAS BEEN SOLVED! - Download and use "ROOT Genius" to root this particular brand of tablet. I have personally tested it and can confirm it works on Firmware revisions: v1.0.07 and v1.0.9! Thanks to "brugos" for finding the fix and bringing it to my attention!]
Hey guys
I do hope I have posted this question in the correct forum, if not I do apologise.
As you can probably tell from the title, I am looking for a way to root my 9.7 inch Prestigio MultiPad 4 Quantum 9.7 tablet (Model: PMP5297C_QUAD).
I have been looking for a way to root this since December, and even though I have found several articles (non English) explaining how to root this device (and have been through all the relevant threads I could find regarding my device on XDA), all of the guides have been for firmware v1.0.3 - my tablet is v1.0.7. I went ahead and tried it anyway, and although CWM installed and launched fine, installing the SuperSU binary via CWM did nothing. It installs, but nothing appears in Android when I reboot, and installing SuperSU from Play Store alerts me that the SuperSU binaries are not installed.
I tried "Kingo Android ROOT" and that wouldn't even detect the device, which isn't surprising as it isn't listed on their website. However somebody on a similar thread (on XDA) suggested that the OP (who has the same tablet as myself) at least try it. I did try it, and sadly it doesn't work.
Device information:
Prestigio MultiPad 4 Quantum 9.7" Tablet
Model Number: PMP5297C_QUAD
Firmware: v1.0.7 (December 2013)
FW Build Number: PMP5297C_QUAD_20131204_V1.0.7
Android Version: 4.2.2
If there is anybody out there who has any idea what to try, then I am willing to listen. If anybody needs any other information, I am more than willing to give it
Cheers guys
Prestigio multipad 4 quantum 9.7
The same here..trying to find a way to root for the new firmware...still haven't got anything...
Yeah... doesn't seem to be a very popular brand of tablet :/ Which is a shame as its pretty damn snappy with the v1.0.7 firmware. I wanna get a resolution changer to work, but none I have tried will work without rooting. Only wanna drop the res for better gaming framerates lol
yeah agree...doesn't seem very popular... I guess we should wait some time more.... did you try rooting with the old firmware and then updating to the new firmware? I guess it wouldn't work anyway....
Nope... from past experience rooting phones updating the firmware breaks the root as v1.0.7 replaced the entire OS if I remember...
Tried the root for v1.0.3 while using v1.0.7... ClockWorkMod installed and works fine, but the SuperSU binary doesn't work/install It was a gamble incase it screwed anything up but luckily it didn't - however, it also didn't work
And yeah, looks like we will need to wait a while longer... I do hope someone out there somewhere knows what to do lol Just gotta find them or wait for them to find us lol
Hey dude...you still haven't find root? If not try with root genious... I got root now on my tablet...running the latest firmware 1.0.9
Regards!
Ah man! You are AMAZING! lol
I almost gave up trying to find a root - until now!
I had no idea that there was a new FW released a few weeks back, just updated it and downloaded "ROOT Genius" - worked first time!
Excellent work there dude, thank you so much and thank you for taking the time to share it with me, and the rest of the people out there who have been in the same situation as us who are still looking for a fix!
Now we have it! Excellent work!
You welcome!
Just curious what are you going to do to your tablet having root now?
Do you know if there is any posibility to install any rom or something like that?
Also knowing Prestigio I guess would be hard to find some updates hmmm
Hey man
Well the main reason I wanted to root first of all was to adjust the resolution of the display, it has a beautiful high resolution display as you know but some games... the FPS leave a lot to be desired. After doing some reading, some posts suggested lowering the display resolution to increase FPS - and the only way to do that was to root the device.
I did try one app, but it went a bit wrong lol. I was hoping it would readjust the resolution and resize the interface accordingly... instead it ended up changing the resolution, but the interface stayed MASSIVE. The device was inoperable and keep getting a "UI Error" constantly popping up making it unusable at all lol. Had to reflash and re-root so I am looking for another option
Beyond that, I have used custom ROMs in the past on my Android phones, but as far as I know, I believe there is only one ROM out there for our tablet and its based on CyanogenMOD I think... I may be wrong, but I thought I read something somewhere about it. Apart from that though, I am not really sure what else I will do now it is rooted Will open the door to some other apps for certain, but the OS itself seems fine and since the new firmware (v1.0.9) - it feels even faster than before!
What do you have in mind?
Yeah I noticed the issue of FPS in some games.... Well I didn't do many things yet I instaled Xposed and some modules.... and also I removed the navingation bar...is just that I dont like the way the navigation bar and status bar are together... thats why I was searching for another rom also which could have not the Ice cream sandwich bar.
I've found this: crewrktablets.arctablet.com where there are some roms with kit kat that may be work for our tablet but nothing confirmed yet...so I'm not sure if I'm gonna try it
and yeah with the new firmware is much faster thats cool.... but I'm almost sure will be forever in 4.2.2
It worked with MULTIPAD 4 QUANTUM 10.1PMP5101C-QUAD with last firmware too.
Hello,
I really cant install drivers to windows OS (Win 8). I downloaded official drivers from prestigio website: http://www.prestigio.com/news/firmware_updates/New_Firmware_Update_for_MultiPad_4_Quantum_9_7
I tried all whats saying in manual but without a success. Is there another way do update to 1.0.7? Can i flash the image in recovery?
Have a nice day
DyXen said:
Hello,
I really cant install drivers to windows OS (Win 8). I downloaded official drivers from prestigio website: http://www.prestigio.com/news/firmware_updates/New_Firmware_Update_for_MultiPad_4_Quantum_9_7
I tried all whats saying in manual but without a success. Is there another way do update to 1.0.7? Can i flash the image in recovery?
Have a nice day
Click to expand...
Click to collapse
Same problem. I can't get working driver for windows 10. Is it even posssible to upgrade my firmware on win 10? And btw DyXen there is already version 1.0.9 , maybe try that one. http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5297C_QUAD/PMP5297C_20140425_v1.0.9.zip
Tnx for this update
but its also useless cuz first i need to install drivers :S
DyXen said:
Tnx for this update
but its also useless cuz first i need to install drivers :S
Click to expand...
Click to collapse
You've got some drivers here: http://storage29-free.uloz.to/Ps;Hs...7c-cwm-v6-0-3-zip?bD&c=1822785863&De&redirs=1
It's also root and cwm. But there is driver folder too. Even for windows 8. It might work.
Here are some instructions maybe you did something wrong
1. On tablet set the usb-connection-style to 'mass storage'. Settings, Memory-3 dots in the upper right corner- choose Mass storage
2. Turn off the tablet.
3. Connect the usb cable with PC and tablet.
4. HOLD DOWN the (volume +) key and turn the device on(still holding the vol.+) until you get a notice(driver not successfuly installed) on your PC.
5. Use the Manual(found in the downloaded folder) to install a proper driver. Or.: Go to Start-My Computer-Right click on it-Properties-Device Manager-Other devices-Unknown device-Update Driver- In the window browse the computer for the specific driver(that's why you need to know your systems pc)
Good luck.
yoyo97 said:
You've got some drivers here: http://storage29-free.uloz.to/Ps;Hs...7c-cwm-v6-0-3-zip?bD&c=1822785863&De&redirs=1
It's also root and cwm. But there is driver folder too. Even for windows 8. It might work.
Here are some instructions maybe you did something wrong
1. On tablet set the usb-connection-style to 'mass storage'. Settings, Memory-3 dots in the upper right corner- choose Mass storage
2. Turn off the tablet.
3. Connect the usb cable with PC and tablet.
4. HOLD DOWN the (volume +) key and turn the device on(still holding the vol.+) until you get a notice(driver not successfuly installed) on your PC.
5. Use the Manual(found in the downloaded folder) to install a proper driver. Or.: Go to Start-My Computer-Right click on it-Properties-Device Manager-Other devices-Unknown device-Update Driver- In the window browse the computer for the specific driver(that's why you need to know your systems pc)
Good luck.
Click to expand...
Click to collapse
Ok, i tried those drivers too but no success. I think maybe i need other OS.
I have developers options ON and USB debugging turned ON. (I think that should be turned ON)
P.S. I changed to mass storage and program did recognize the tablet but when i clciked switch (tablet turned OFF) and then it did not recognize anymore - i think problems with drivers.
Update to 1.0.9
Hello again,
I finally made it
Here is the thing:
1) Download this update (1.0.9): http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5297C_QUAD/PMP5297C_20140425_v1.0.9.zip from @yoyo97 (thanks)
2) Dont use drivers in folder /Drivers_x32 or /Drivers_x64
Instead go to /tools/Driver (and use this one x86 or x64 - depends on your OS)
3) Follow instructions in manual:
start RKBatchTool.exe and if icon is not green click Switch. Wait for tablet to shutdown and you should get green icon. (if this doesnt help turn off your tablet manualy and press AND hold volume + button for about 6-7 seconds DONT release and plug in USB cable then you should get notification on windows and green icon in RKBatchTool.exe)
4) Choose the firmware image and click upgrade.
5) let the software do the trick
6) profit
7) for rooting i used an android app called kingo root https://www.kingoapp.com/ just download the app on tablet. When you start it just click root and let the app do the trick.
After around 2-4min your tablet should be rooted.
I was using windows 7 (x86)
If you need any information please let me know and I will be glad to help
Have a nice day,
DyXen
Hi DyXen
Tried it all, but cannot get rockusb.inf to work on Windows 10 64-bit. I see two devices in my device manager after connecting the tablet, POrtable Device PMP5297C_QUAD and Android Composite ADB Interface. Have tried forcing the bundled Win8 x64 rockusb.inf on to both devices but keep getting "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems."
I have also tried DriverAssistant v4.4 and it installed the drivers OK.
Even tried copying the IMG and ZIP files to SD card and applying via recovery. Nothing works. My tablet is still stuck on 1.0.3 and is sluggish as a snail. Some help will be greatly appreciated.
hyderaly said:
Hi DyXen
Tried it all, but cannot get rockusb.inf to work on Windows 10 64-bit. I see two devices in my device manager after connecting the tablet, POrtable Device PMP5297C_QUAD and Android Composite ADB Interface. Have tried forcing the bundled Win8 x64 rockusb.inf on to both devices but keep getting "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems."
I have also tried DriverAssistant v4.4 and it installed the drivers OK.
Even tried copying the IMG and ZIP files to SD card and applying via recovery. Nothing works. My tablet is still stuck on 1.0.3 and is sluggish as a snail. Some help will be greatly appreciated.
Click to expand...
Click to collapse
The same problem I have with Multipad 4 Quantum 9.7 !!! No one driver is acceptable, no one method also. tablet is just frozen, only boot loader working but does not accept any update!!!
Please help
kompjuterija said:
The same problem I have with Multipad 4 Quantum 9.7 !!! No one driver is acceptable, no one method also. tablet is just frozen, only boot loader working but does not accept any update!!!
Click to expand...
Click to collapse
Could you solve it? Cause I have the same problem
Hello guys, i need your help.. I have an rk2918 tablet, its name is teclast p85a and i bricked it.. anyway i have installed a couple of roms but none of them worked(actually the 2nd one turned the screen into grey but that all)..anyway i plugged in my tablet but now my computer detects it as an Full AOSP rk29sdk device and not as RK29 device(which it was before i installed these roms). Now when i go to device manager in order to update the software and put rockusb.inf for windows 7-64 bit i get this error: Make sure you have selected the correct firmware for your operating system(windows 7-64bit) WHICH IS WHAT I DO..So now RKbatchtool doesnt recognize my tablet and i cant flash it with any rom... Does anyone know what to do?? Please i am completely lost.. Thanks in advance!!
UPDATE: I found a firmware which was for a newer revision of the motherboard(it was for V5.1, mine is V4.1)but it booted up anyway . Everything works, except for the display. It is showing me a pattern made from small white dots. Could it be the firmware or the LCD? (the tablet was sitting for almost 2 years before I reflashed it)
Hello,
I hard bricked my alps m733w tablet by flashing an incompatible preloader. I then found some instructions on how to enter META mode and I tried to find for the stock firmware online but those "ROMS" were either password locked (I couldn't unzip them) or they were deleted.
Can somebody help me? Can you please send me a compatible and trustworthy stock firmware?
Here is some useful info:
CPU: MT6572
Model: HX-M733-MB-V4.1
Android version: I think it ran 4.2
Firmware(according to those sites that I went to try and find the firmware): MT6572___M733W__HONGXIANG__4.2.2__ALPS.JB3.MP.V1.60.rar
I'll be using SP flashtool to reflash my device.