Hello all i was wondering which hboot i should be using for jb.. I am having minor issues and i believe it to be the hboot.. Thanks in advance!
Sent from my EVO using xda premium
YoFayce said:
Hello all i was wondering which hboot i should be using for jb.. I am having minor issues and i believe it to be the hboot.. Thanks in advance!
Sent from my EVO using xda premium
Click to expand...
Click to collapse
What Hboot are you on, and what kind of problems are you having?
The advice is free....the bandwidth, not so much
My nav/maps is fc all the time and by battery life is crap with gps wifi and data off and the screen brightness on the most minimal setting.. I had problems in 1.12 with suber su crashing so i updated to whatever is on viperboys page and now i get nav fc :/
Sent from my EVO using xda premium
I believe it is 2.09
Sent from my EVO using xda premium
YoFayce said:
My nav/maps is fc all the time and by battery life is crap with gps wifi and data off and the screen brightness on the most minimal setting.. I had problems in 1.12 with suber su crashing so i updated to whatever is on viperboys page and now i get nav fc :/
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I'm running a custom stock tweaked jb sense Rom on hboot 1.19 and radio 0809....not one issue whatsoever personally....didn't update to latest radio or hboot for personal reasons and everything working perfectly....the nav crashing issue is a hit or miss issue per device...some have it some don't, hasn't been figured out....I personally fixed the issue by going through several refurb replacements til it worked...seems to be a manufacturing batch pattern...hope that helps...
Ps: when you say you used viperboys Rom, are you talking about the stock odex zip file? If so, you might still be on older hboot...that zip doesn't change radio or hboot versions....just the Rom/system file itself...b
Sent from my EVO using xda app-developers app
You need to s-off, the reason, hboot 2.09 prevents you from writing on certain partitions, hence your problems.
Sent from my EVO using xda premium
Thank you all i am s-off so i am gonna go back to 1.19 and try it that way.. Yes it is his de odex version of the rom
Sent from my EVO using xda premium
Related
Any one having problems sending and reviving picture msgs? I update my profile and prl several times clean cache and restart too I live in Nashville if that helps
Sent from my EVO using xda app-developers app
Are you s-off?
Sent from my EVO using xda app-developers app
Sinistertensai said:
Are you s-off?
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
No I have 1.05 on
poison_blood said:
No I have 1.05 on
Click to expand...
Click to collapse
Hmm maybe A data, issue, network or just the Rom itself. Try redownloading check the md5s make sure they match. Also check mms settings.
Sent from my EVO using xda app-developers app
Sinistertensai said:
Hmm maybe A data, issue, network or just the Rom itself. Try redownloading check the md5s make sure they match. Also check mms se
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Mms settings are ok I'll check the signature. I think I'm going to install fresh n use panda so I can get the s off And reinstall viper. I'll let you know thanks for the help!
Your firmware is old...update it to most recent...look up captain throwbacks thread for more info.
Sent from my EVO using xda premium
Sure I'll thanks for the help
Sent from my EVO using xda app-developers app
poison_blood said:
Mms settings are ok I'll check the signature. I think I'm going to install fresh n use panda so I can get the s off And reinstall viper. I'll let you know thanks for the help!
Click to expand...
Click to collapse
you may get an error 16 code from sprint make a phone call after s-on and wait theyll redirect you to a rep. just say you accepted the OTA update or an update but forgot to put on wifi and you cant make calls now. it's what I did after s-on. its a little white lie but what sprint doesn't know wont hurt em.
Sinistertensai said:
you may get an error 16 code from sprint make a phone call after s-on and wait theyll redirect you to a rep. just say you accepted the OTA update or an update but forgot to put on wifi and you cant make calls now. it's what I did after s-on. its a little white lie but what sprint doesn't know wont hurt em.
Click to expand...
Click to collapse
cant use the lazy panda Im on 1.15 also Im a windows user and not to brave to try to downgrade the hboot
is there any other way to update my radio???? I hate the s\on sh*t sorry just getting frustrated I dont want to comeback to stock just cause the hboot
poison_blood said:
cant use the lazy panda Im on 1.15 also Im a windows user and not to brave to try to downgrade the hboot
is there any other way to update my radio???? I hate the s\on sh*t sorry just getting frustrated I dont want to comeback to stock just cause the hboot
Click to expand...
Click to collapse
That's the only way you can do it I believe
Sent from my EVO using xda premium
mrlakadaddy said:
That's the only way you can do it I believe
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Well if methods were shared... But every one needs a call to fame, I guess.
Sent from my EVO using xda app-developers app
Sinistertensai said:
Well if methods were shared... But every one needs a call to fame, I guess.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Maybe a link?
I'm thinking to go back to stack n wait
Or try to achieve soff with Linux that I don't feel confident oh well
Sent from my EVO using xda app-developers app
[Q UOTE=poison_blood;33334405]Mms settings are ok I'll check the signature. I think I'm going to install fresh n use panda so I can get the s off And reinstall viper. I'll let you know thanks for the help![/QUOTE]
I'm trying to install ruu, but it gives me an error that I can't update cause its the same Img I try about 100 time already I have the drives download ruu 3 times to make sure it isn't corrupt After all that it keeps giving me an error.
I want to go back to stock and wait right now I'm running viper love the Rom but I need to update my radio
mrlakadaddy said:
Your firmware is old...update it to most recent...look up captain throwbacks thread for more info.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I need to be s off And I'm running 1.5 so no panda for me.
I don't know much of Linux if not nothing. I just don't want to brik my phone
There's a downgrade method in original android forumn.
Sent from my EVO using xda premium
hello all I'm kinda stuck... I have hboot 1.12 I would like to gain S-off but I cannot figure out what i need to do. I've been to the unlimited IO site it says it supports hboot 1.12/1.15/1.19 but there's an asterisk further down the page that states (If you have HBOOT 1.12 you must use the DirtyRacun process to upgrade your RUU to gain S-OFF.) what does this mean? and even more confusing is once you get down to step 7 on this page you only have two hboots to choose from. can anybody help?
Thanks in advance.
Sounds like you need to upgrade your hboot to 1.15 r 1.19 and then use dirty racoon. I'm pretty sure lazy panda is no longer available
Sent from my EVO using xda premium
I think you have to run one of the newer RUUs, then you can run the racoon.
Sent from my EVO using Tapatalk 2
How do I do this?
how do I get from hboot 1.12 to hboot 1.15?
I'm no pro, but I downloaded the RUU and renamed it to PJ75IMG and put it on my sdcard, rebooted into bootloader and hit yes when prompted to update.
Sent from my EVO using Tapatalk 2
if u have hboot 1.12 then u run lazy panda.. thats will give u s-off.. dirty racun is for the new hboots.. run lazy panda u will be golden:good:
evo401 said:
if u have hboot 1.12 then u run lazy panda.. thats will give u s-off.. dirty racun is for the new hboots.. run lazy panda u will be golden:good:
Click to expand...
Click to collapse
Lazypanda is no longer available
Sent from my EVO using xda premium
So since lazy panda is no longer available what do I do?
Sent from my EVO using Tapatalk 2
Upgrade to 1.15 and run dirty racoon
Sent from my EVO using xda premium
that's basically what I'm attempting to find out.. how to upgrade to 1.15
The dirty racoon process involves relocking and running a RUU. This will prepare your phone for the s-off process. AFAIK just follow the directions and you'll be all set or if you wanna double check ask someone in that thread
I think your good to follow the steps
Sent from my EVO using xda premium
Here, I had this on dropbox from when I did it for a friend...
http://db.tt/0Jj9AHJI
Sent from my EVO using xda premium
Pachonk said:
Here, I had this on dropbox from when I did it for a friend...
http://db.tt/0Jj9AHJI
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Awesome. I replied to your post in another thread about getting a copy of this. Thanks!
Sent using my HTC EVO LTE and a magic wand
teflonsean said:
that's basically what I'm attempting to find out.. how to upgrade to 1.15
Click to expand...
Click to collapse
Any luck man?
Sent from my EVO using xda premium
I have the file now I'm trying to figure out how to use it...lol
Sent from my EVO using Tapatalk 2
Thanks fam.. it took a lot of questions but I'm finally S-off Jelly bean with the latest firmware, radios & with WiFi tether working perfectly.
Sent from my EVO using Tapatalk 2
teflonsean said:
Thanks fam.. it took a lot of questions but I'm finally S-off Jelly bean with the latest firmware, radios & with WiFi tether working perfectly.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Could you summarize the steps you did? I have the same question about HBOOT 1.12.
teflonsean said:
Thanks fam.. it took a lot of questions but I'm finally S-off Jelly bean with the latest firmware, radios & with WiFi tether working perfectly.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Glad u got there man. Life is much easier being s-off
Sent from my EVO using xda premium
Yes, what steps did you take. I have 1.12 and am trying to figure out what I need to do. Thanks so much!
Title pretty much says it but just wondering if anyone has not been able to run custom kernels. It started with my attempt with Komodo etc., but I always get some form of screen flashes or massive FCs. Im am rooted with original 1.12 hboot. I have been able to successully load and run ROMs from Viper to AOKP, even CM10.1 but never able to run a custom kernel. I have wiped clean, reset and still no go. I am using the 2.2.1 TWRP so wondering if the newest TWRP would fix that ability? I know some of the EVO LTEs just wont run with a custom kernel but figured I would try.
Thanks in advance for any input.
Sent from my GT-P7510 using xda app-developers app
Are you S-Off or S-On. I would flash the latest recovery just to be safe.
Sent from my Galaxy Nexus using xda premium
I've had the same issue with Komodo. I'm S-OFF 1.19. I tried on the latest twrp, 2.3.3, and even on a tip re-flashed 2.3.1
I was able to boot after flashing with 2.3.1, sometimes...but it really wasn't stable enough to even try to use. Constant reboots, FC's, bootloops, etc
The device I'm having this issue on is an insurance replacement from asurion, the 4th one to be exact. i never had this issue on any of the previous devices...my first was new via preorder, that was stolen, and the first 2 refurbs were returned due to other hardware defects, although at least they could run a custom f***ing kernel.
as far as I've been able to tell nobody has found the issue that makes some devices not take to a custom kernel.
Did any of Ye try the voltage stabilizer
Sent from my EVO using xda premium
corcgaigh said:
Did any of Ye try the voltage stabilizer
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thanks for the replies. I am S-OFF, current baseband etc. I haven't tried the voltage mod, but will look into that and come back for questions if necessary. If you have any tips on the voltage mods etc, feel free to pass them on. I have tried to use Goo Manager to download the newest TWRP but kept getting errors but haven't tried today. Will try to get the most recent on and look at voltage mods. Its not a huge deal, I get great battery life and its fast enough but I wanted to at least see if there was something specific that I have been missing to run the kernels. Thanks for all the replies!
The Komodo kernel worked only after updating TWRP to newest and I also had to use the voltage mod as neither would load without it. Great advice and for first time I am running custom kernel on top of PACMAN ROM. I tried capped at 1.7 then 2.1 both work but the 2.1 started to indicate some weird results within minutes of loading. I backed down to 1.9/384 and looks to be the sweet spot. Thanks again!
Sent from my EVO using xda app-developers app
corcgaigh said:
Did any of Ye try the voltage stabilizer
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I have tried that and it hasn't made any improvements for me.
Sent from my S-OFF HTC EVO 4G LTE JB AOSP FTW
ryanissnackpack said:
I have tried that and it hasn't made any improvements for me.
Sent from my S-OFF HTC EVO 4G LTE JB AOSP FTW
Click to expand...
Click to collapse
I don't know if it makes any difference but I flash the voltage zip before and after flashing the kernel. Also make sure your downloading the s-on if that's what you need
Edit just saw your s-off in your sig
Sent from my EVO using xda premium
I haven't tried flashing post install since it worked loading pre-install for me but will if I have any additional issues. Thanks for the tips!
Sent from my EVO using xda app-developers app
I'm getting great battery life with moderate use as long as I am not talking on my phone but as soon as I am it decreases 3 times as fast. I can get over 3 days with moderate use over the weekend but once the work week starts I only get about 26 hours on a charge. I have an under clocking profile set up to nock the phone down to minimum when on a call. Just wondering if a different dialer would save battery or anything else I'm not thinking of. Thanks for any advice.
Sent from my SCH-I815 using XDA Premium HD app
Don't think the dialer will make much difference. What radio are you on? The latest is best on battery. My opinion anyway.
I've never messed with radios before. Is that about all I can do for battery life while calling and are the stock radios that bad on battery life. Also am I able to flash radios while being s-on? Appreciate the help
Sent from my SCH-I815 using XDA Premium HD app
czach5932 said:
I've never messed with radios before. Is that about all I can do for battery life while calling and are the stock radios that bad on battery life. Also am I able to flash radios while being s-on? Appreciate the help
Sent from my SCH-I815 using XDA Premium HD app
Click to expand...
Click to collapse
You have to be s off to flash the radios alone.. But you can achieve the same thing by flashing an RUU via ph98img in bootloader. That will also update your hboot and firmware etc..
Sent from my ADR6425LVW using xda app-developers app
Loading a new ruu with an updated hboot won't mess with my ROM kernel our recovery will it? And do I just put it in the zip load hboot and let it update? And to get the most recent radios do I just look for the most update ruu? And I've heard of global ruu and other types, is there a certain one I need to look for? Sorry for all the questions never went into this before and want to make sure I'm doing it right. Thanks again
Sent from my SCH-I815 using XDA Premium HD app
Ok finally had some downtime from driving and did some research and I guess my last question is after I relock the bootloader and flash the zip from the locked bootloader will it erase all the data and if it does cam I unlock the bootloader and just restore the nandroid from cwm? Thanks for your help again.
Sent from my SCH-I815 using XDA Premium HD app
So I'm kinda a noob, at least for HTC. I have a VM 3D rooted s off. My question is I have tried to install ZR3D rom, but all i can get is a boot loop. my bootloader says juopunitbear 1.57.5757, is this my issue? I was thinking the loop is due to bootloader. I did run factory wipe, and dalvik/cache, installed using 4EXT. Can someone help please?
bknight99 said:
So I'm kinda a noob, at least for HTC. I have a VM 3D rooted s off. My question is I have tried to install ZR3D rom, but all i can get is a boot loop. my bootloader says juopunitbear 1.57.5757, is this my issue? I was thinking the loop is due to bootloader. I did run factory wipe, and dalvik/cache, installed using 4EXT. Can someone help please?
Click to expand...
Click to collapse
Yeah. Zr3d you need 1.50 or below. I believe it's a gb ROM.
Sent from my SlimRom jb'd EVO 3D.
Yes that is a GB ROM I use 1.04 eng or the 1.40 with those ROMs. If you need any help changing the hboot just pm me and I can walk you through it.
Sent from my Evo 3D CDMA using xda app-developers app
Would the same be true for a sense rom?
Sent from my HTCEVOV4G using xda app-developers app
bknight99 said:
Would the same be true for a sense rom?
Sent from my HTCEVOV4G using xda app-developers app
Click to expand...
Click to collapse
It depends on what version of android it is using.
bknight99 said:
Would the same be true for a sense rom?
Sent from my HTCEVOV4G using xda app-developers app
Click to expand...
Click to collapse
Some, not all. You have to read the OP.
Sent from my SlimRom jb'd EVO 3D.
The sense rom I had in mind is Frozen with sense 4.1. I have read and reread OP carefully, but no mention of bootloader version, but I also had problems flashing it. Got a message that zip was corrupt. Is that my issue or the actual download? I tried two dif. versions of that rom and dl'd each twice with same result
bknight99 said:
The sense rom I had in mind is Frozen with sense 4.1. I have read and reread OP carefully, but no mention of bootloader version, but I also had problems flashing it. Got a message that zip was corrupt. Is that my issue or the actual download? I tried two dif. versions of that rom and dl'd each twice with same result
Click to expand...
Click to collapse
Sounds like a bad download. The latest version is 3.0 final episode. I used jbear 1.58 hboot for that rom when I had it and it ran great. For you the 1.57 hboot should work fine. Only problem with sense 4 roms is the low volume. Just an FYI.
Sent from my SlimRom jb'd EVO 3D.
Oh right I was just reading that. I'll poke around and see what else looks good. Any suggestions for that hboot?
bknight99 said:
Oh right I was just reading that. I'll poke around and see what else looks good. Any suggestions for that hboot?
Click to expand...
Click to collapse
I use 1.50 or lower for jellybean, and gingerbread roms, and for you being VM 1.57 for ICS roms.
Sent from my SlimRom jb'd EVO 3D.
Thanks for your help and info. Heading off to attempt to downgrade now!
Edit: Worked awesome after i found this: http://forum.xda-developers.com/showpost.php?p=32259533&postcount=60
Ramjet is the man! Thanks everyone!
bknight99 said:
Thanks for your help and info. Heading off to attempt to downgrade now!
Click to expand...
Click to collapse
Any problems post back and let us know.
Sent from my SlimRom jb'd EVO 3D.
Of course will do!
bknight99 said:
Do I close this somehow or ??
Click to expand...
Click to collapse
Nope. All good.
Sent from my SlimRom jb'd EVO 3D.
You should try the viper 3d if you like sense 4.1. It has an xloud toggle in extended settings that gives audio a big boost.
Sent from my PC36100 using xda app-developers app
If you use viper use r284. The most stable and the volumes are all cranked up loud. It does have a ton of customizations.
Sent from my SlimRom jb'd EVO 3D.
aqualls said:
If you use viper use r284. The most stable and the volumes are all cranked up loud. It does have a ton of customizations.
Sent from my SlimRom jb'd EVO 3D.
Click to expand...
Click to collapse
Make sure you're on hboot 1.58 of you use that release though. That was before the ROM became hboot agnostic.
Sent from my PG86100 using Tapatalk 2
coal686 said:
Make sure you're on hboot 1.58 of you use that release though. That was before the ROM became hboot agnostic.
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
Did forget to mention that part.
Sent from my SlimRom jb'd EVO 3D.