hello guys...can i install roms via odin and what kind of roms?
thanks
Stock Roms generally are installed with Odin, custom Roms generally installed via cwm recovery
slaphead20 said:
Stock Roms generally are installed with Odin, custom Roms generally installed via cwm recovery
Click to expand...
Click to collapse
yeah i know but i want to know if i can install custom roms via odin because i cant download any stock rom because hotfile is sooooo slow and even after 3 days it doesnt download the rom....
sooo any ideas?
Look for a torrent link then
What's wrong with using cwm? You'd probably need one once you root.
Sent from my GT-I9300 using xda premium
xcly said:
Look for a torrent link then
What's wrong with using cwm? You'd probably need one once you root.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
the problem is that i cant go to cwm because my s3 is dead.....i tried to flash a stock rom via mobile odin and it soft bricked....i can go only to download mode....can you give me a torrent link...even if its 4.0.4 because i didnt find one...thanks
but i want to know if i can install custom roms via odin
You would need to read the custom roms description and find if any are Odin flashable tar format .
jje
Flash a stock Rom with Odin and get your phone working properly before you start pratting around with trying to flash a custom Rom
slaphead20 said:
Flash a stock Rom with Odin and get your phone working properly before you start pratting around with trying to flash a custom Rom
Click to expand...
Click to collapse
um buddy,did you read what i wrote?i am unable to downlaod any stock roms....i have been installing custom roms for years now
You said you tried to flash a Rom with mobile Odin, sooooo......try flashing that with PC Odin
---------- Post added at 07:42 PM ---------- Previous post was at 07:40 PM ----------
Have you also just tried flashing a recovery?
slaphead20 said:
You said you tried to flash a Rom with mobile Odin, sooooo......try flashing that with PC Odin
---------- Post added at 07:42 PM ---------- Previous post was at 07:40 PM ----------
Have you also just tried flashing a recovery?
Click to expand...
Click to collapse
hahahahah fixed that anyway.....yeah but as i said on my posts before my phone was dead.i could go only on downlaod mode...thanks anyway buddy
Related
Hi
I recently got the Samsung Galaxy S2 and upgraded to ICS via odin.
I HATE the Samsung Touch Wiz UI so I wanted to flash the Spike Pure ICS ROM - v7.2
I followed every step on this tutorial http://www.theandroidsoul.com/pure-ics-rom-android-4-0-3-for-galaxy-s2-i9100/ a zillion times but dint help!
I get my phone n ICS - root is successful; but every time i flash to the Spike Pure ICS ROM i brick my phone and get a message - KERNEL UPLOAD PANIC MODE
can someone please help me out?
My Android version is 4.0.3 and build number is ICS.XXLP2
If there is another ROM with pure ICS i can flash easily with odin.. or any other help I would be very glad..
thanks
after wiping all from CWM, flash a GB stock rom from ODIN,
then root it with CF-root, then install your favourite ROM
ZACQ8 said:
after wiping all from CWM, flash a GB stock rom from ODIN,
then root it with CF-root, then install your favourite ROM
Click to expand...
Click to collapse
ok brother - just so that i have it right
i have a rooted phone currently running a leaked version of ics
i should go to the recovery mode whipe all data/factory setting, clear cache
then install the galaxy s2 stock rom
root with CF root and then i can install any rom from the SD car. correct?
if yes; the
a. i cannot find the stock rom anywhere.. all files seemed to have been removed. do u have a link?
b. how do i CF root?
Panic mode. That is crazy!!!
Sent from my LG-P999 using xda premium
ZACQ8 said:
after wiping all from CWM, flash a GB stock rom from ODIN,
then root it with CF-root, then install your favourite ROM
Click to expand...
Click to collapse
sorry but im very new to this
see on my signature
both are available
KRAZYADROIDMASTER said:
Panic mode. That is crazy!!!
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
i kow man.. i just want a pure ICS rom.. cant stand touch wiz.. was up till 3 last night figuring out.. now its 1 AM already and i cant find a solution
select GB latest GB, XWLA2 or XWLA4
ZACQ8 said:
select GB latest GB, XWLA2 or XWLA4
Click to expand...
Click to collapse
going 1 by 1 brother.. am downloading this; hope this is correct.. after flashing this ill see the CF root piece..
XWLA4
Android 2.3.6
There is no carrier branding
This package has: PDA: XWLA4| Modem/phone: XXKI3| CSC: XEUKH2
Download: Download
XWLA4 GB STOCK ROM:
http://skywanker.net/download/downl...9100_DBT_I9100XWLA4_I9100XXKI4_I9100DBTKH1.7z
CF-ROOT for THAT : http://download.chainfire.eu/144/CF-Root/SGS2/CF-Root-SGS2_XW_OXA_LA4-v5.0-CWM5.zip
feel free to ask more
ZACQ8 said:
XWLA4 GB STOCK ROM:
http://skywanker.net/download/downl...9100_DBT_I9100XWLA4_I9100XXKI4_I9100DBTKH1.7z
CF-ROOT for THAT : http://download.chainfire.eu/144/CF-Root/SGS2/CF-Root-SGS2_XW_OXA_LA4-v5.0-CWM5.zip
feel free to ask more
Click to expand...
Click to collapse
cant thank u enough - downloading the ROM.. will take 40 mins on my stupid connection (busted my limit) will flash it and get back to u - thanks again
I hope you have already flashing experiance with ODIN...
you have to unzip that ROM file with Winrar
then you will get a single file with .MD5 extension
select that on PDA section thats it...
ZACQ8 said:
I hope you have already flashing experiance with ODIN...
you have to unzip that ROM file with Winrar
then you will get a single file with .MD5 extension
select that on PDA section thats it...
Click to expand...
Click to collapse
yes sir - and exactly the same method for the CF root too.. correct?
theotherashish said:
yes sir - and exactly the same method for the CF root too.. correct?
Click to expand...
Click to collapse
flash the tar file (after unziping) with ODIN (TAR to be selected in PDA field)
yes
---------- Post added at 10:49 PM ---------- Previous post was at 10:49 PM ----------
rom may be .MD5 not .TAR
ZACQ8 said:
yes
Click to expand...
Click to collapse
great - will get back once im done..
P.S. to flash a new ROM i copy the rom file in the internal memory and flash it with the rom loader app?
ZACQ8 said:
yes
---------- Post added at 10:49 PM ---------- Previous post was at 10:49 PM ----------
rom may be .MD5 not .TAR
Click to expand...
Click to collapse
TAR will be the CF root
Not rom loader app....from CWM, after you flash CF-root, you will get an application called CWM open that and select reboot into Clockworkmod, then you will get Clockworkmod recovry from there you have to do wipes/installs...
see what is downloadmod and recoverymod in my signature....
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
theotherashish said:
TAR will be the CF root
Click to expand...
Click to collapse
yes after unzipping you will get Tar file for CF-root
---------- Post added at 11:11 PM ---------- Previous post was at 10:57 PM ----------
make sure you phone is I9100 - and not I9100G
---------- Post added at 11:16 PM ---------- Previous post was at 11:11 PM ----------
Also I suggest dont go for any ROM which not posted in XDA...you wont get any support like XDA....
pick the ROMs from here :http://forum.xda-developers.com/forumdisplay.php?f=1204
ZACQ8 said:
Not rom loader app....from CWM, after you flash CF-root, you will get an application called CWM open that and select reboot into Clockworkmod, then you will get Clockworkmod recovry from there you have to do wipes/installs...
see what is downloadmod and recoverymod in my signature....
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
yes after unzipping you will get Tar file for CF-root
---------- Post added at 11:11 PM ---------- Previous post was at 10:57 PM ----------
make sure you phone is I9100 - and not I9100G
---------- Post added at 11:16 PM ---------- Previous post was at 11:11 PM ----------
Also I suggest dont go for any ROM which not posted in XDA...you wont get any support like XDA....
pick the ROMs from here :http://forum.xda-developers.com/forumdisplay.php?f=1204
Click to expand...
Click to collapse
all done.. i have the spike pure ICS ROM running thanks a ton brother
theotherashish said:
all done.. i have the spike pure ICS ROM running thanks a ton brother
Click to expand...
Click to collapse
you are welcome my friend, I'll PM you later about the ROMs
Ok, I am lost, I don't know what I'm doing wrong but I tried to install the latest XXDLI8 leak, and I am met with error 7 in CWM.
I even downloaded and flashed the needed PDA from sammobile (which is XXBLG8_XABLG8_XXLH1) but I still get error 7? The assert check fails on PreloadInstaller
What's the deal?
Did you flash root and the modem? LH1 IIRC?
Kangburra said:
Did you flash root and the modem? LH1 IIRC?
Click to expand...
Click to collapse
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Theshawty said:
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Click to expand...
Click to collapse
you need to flash this one: I9300XXBLG8_I9300OXABLG8_I9300XXLG8_HOME.tar
and then the lh1 modem separatly or you will get the error 7.
alirey said:
you need to flash this one: I9300XXBLG8_I9300OXABLG8_I9300XXLG8_HOME.tar
and then the lh1 modem separatly or you will get the error 7.
Click to expand...
Click to collapse
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Don't know why. But had the same problem. Error 7 seems to be an file checksum problem and separte flashing solves it.
Sent from my GT-I9300 using xda premium
Theshawty said:
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Click to expand...
Click to collapse
Was it a hotfile link?
For me it only works without flaws if I use the odin base that perka made. Now and the I do have hiccups with it though.
Kangburra said:
Did you flash root and the modem? LH1 IIRC?
Click to expand...
Click to collapse
Root is not really required to flash the OTA. However the Rom and the modem need to be flashed separately.
Sent from my GT-I9300
---------- Post added at 11:07 AM ---------- Previous post was at 11:04 AM ----------
Theshawty said:
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Click to expand...
Click to collapse
Don't use this Rom. This Rom seem to be corrupt. Instead download the LG8 Rom from goo.im and flash the LH1 modem separately.
Sent from my GT-I9300
pkoper said:
Was it a hotfile link? .
Click to expand...
Click to collapse
Indeed it was. I should have known better.
gillboyzz said:
Don't use this Rom. This Rom seem to be corrupt. Instead download the LG8 Rom from goo.im and flash the LH1 modem separately.
Sent from my GT-I9300
Click to expand...
Click to collapse
Will do.
EDIT: You mean the LG8 one Pulser has uploaded? http://goo.im/devs/pulser/GalaxyS3
Sammobile are linking to http://www.hotfile.com/dl/170853923/e311e2f/I9300XXBLG8_I9300OXABLG8_BTU.zip.html which still needs the LH1 modem flashed after the ROM flash.
It does work, but you have to flash the modem or you get the 7 error. As above the root steps are not needed, until after the OTA anyway.
Kangburra said:
Sammobile are linking to http://www.hotfile.com/dl/170853923/e311e2f/I9300XXBLG8_I9300OXABLG8_BTU.zip.html which still needs the LH1 modem flashed after the ROM flash.
It does work, but you have to flash the modem or you get the 7 error. As above the root steps are not needed, until after the OTA anyway.
Click to expand...
Click to collapse
The only reason I flash cf-root directly after odin'ing the stock ROM is to get CWM so I can flash the OTA.
Theshawty said:
Indeed it was. I should have known better.
Will do.
EDIT: You mean the LG8 one Pulser has uploaded? http://goo.im/devs/pulser/GalaxyS3
Click to expand...
Click to collapse
Nope..the original stock rom..just search with the first initials of the rom on goo
Sent from my GT-I9300
gillboyzz said:
Nope..the original stock rom..just search with the first initials of the rom on goo
Sent from my GT-I9300
Click to expand...
Click to collapse
Well I downloaded it and it seems like it's the "legit" LG8 one so I'll go with it.
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Theshawty said:
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Click to expand...
Click to collapse
So you odin flashed the base rom
then odin flashed cf-root
boot into cwm and flash LH1 and OTA (no reboot between) and error 7?
Weird. Something wrong with one of those files.
Theshawty said:
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Click to expand...
Click to collapse
Pls dont root until fully cooked. Here are my steps.
Do factory reset before flashing
Flash stock BLG8 rom through odin and restart.
On the startup screen where you choose the lang, dont proceed further. Just restrart in the download mode again.
Flash the LH1 modem through odin and restart and again on the startup screen restart the phone in recovery mode. Do factory reset and chose the OTA file flash through recovery. Let the upgarde complete. Dont reboot, just do factory reset again and enjoy the leak.
You may root now if required.
Sent from my GT-I9300
Theshawty said:
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Click to expand...
Click to collapse
I initially had the exact same problem .. so I downloaded the I9300BLG8 base Rom again , but the one without the LH1 modem built in and then flashed LH1 modem after flashing the base Rom. This sorted out my problem .. using this method has been working flawlessly ever since XXDLI4 for me .. worth a shot mate .
Sent from my GT-I9300 using xda app-developers app
Kangburra said:
So you odin flashed the base rom
then odin flashed cf-root
boot into cwm and flash LH1 and OTA (no reboot between) and error 7?
Weird. Something wrong with one of those files.
Click to expand...
Click to collapse
Those are the exact steps I took. None of the files seem borked either.
bazzazz said:
I initially had the exact same problem .. so I downloaded the I9300BLG8 base Rom again , but the one without the LH1 modem built in and then flashed LH1 modem after flashing the base Rom. This sorted out my problem .. using this method has been working flawlessly ever since XXDLI4 for me .. worth a shot mate .
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Same here, never used the one with the modem in it.
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
gillboyzz said:
Pls dont root until fully cooked. Here are my steps.
Do factory reset before flashing
Flash stock BLG8 rom through odin and restart.
On the startup screen where you choose the lang, dont proceed further. Just restrart in the download mode again.
Flash the LH1 modem through odin and restart and again on the startup screen restart the phone in recovery mode. Do factory reset and chose the OTA file flash through recovery. Let the upgarde complete. Dont reboot, just do factory reset again and enjoy the leak.
You may root now if required.
Sent from my GT-I9300
Click to expand...
Click to collapse
How do you get odin to flash an OTA file? I thought the whole point of the cf-root was to get to cwm? Did I miss something here?
Kangburra said:
Same here, never used the one with the modem in it.
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
How do you get odin to flash an OTA file? I thought the whole point of the cf-root was to get to cwm? Did I miss something here?
Click to expand...
Click to collapse
Nope.. you can't flash the ota file through odin. Refer to my steps above, once the modem is flashed through odin, you use tge stock recovery to flash the OTA
Sent from my GT-I9300
Hey guys i need some advice regarding rooting my phone and installing custom recovery. my phone is running on stock 4.1.2 XXEMG4. I want to install a custom 4.3 sammy rom. So can i just flash siyah kernel to root the phone and get a custom recovery?? And can i flash a custom 4.3 rom from siyah Recovery???
You can do that.
But I offer you to flash cf-auto-root and rott your device then flash your rom from cwm.
Notic: cwm will be install with cf-root
Sent from my GT-I9300 using Tapatalk
pasanjay said:
Hey guys i need some advice regarding rooting my phone and installing custom recovery. my phone is running on stock 4.1.2 XXEMG4. I want to install a custom 4.3 sammy rom. So can i just flash siyah kernel to root the phone and get a custom recovery?? And can i flash a custom 4.3 rom from siyah Recovery???
Click to expand...
Click to collapse
kernel is not equal rooting or recovery.
read the guides & howtos to know what is the difference. anything explained there.
a good start is cf-auto-root to root your phone, after that continue reading.
---------- Post added at 07:10 AM ---------- Previous post was at 07:09 AM ----------
alireza17mah said:
You can do that.
But I offer you to flash cf-auto-root and rott your device then flash your rom from cwm.
Notic: cwm will be install with cf-root
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
CWM will only be installed if CF-Root 6.4 is used, not with CF-Auto-Root (which is more secure regardign SDS)
chrismast said:
kernel is not equal rooting or recovery.
read the guides & howtos to know what is the difference. anything explained there.
a good start is cf-auto-root to root your phone, after that continue reading.
---------- Post added at 07:10 AM ---------- Previous post was at 07:09 AM ----------
CWM will only be installed if CF-Root 6.4 is used, not with CF-Auto-Root (which is more secure regardign SDS)
Click to expand...
Click to collapse
I have read somewhere that by flashing a 4.3 rom can cause efs issues. So is it better if i flash a sammy 4.3 rom with odin? And then I can flash a rooting kerenel and a recovery right??
pasanjay said:
I have read somewhere that by flashing a 4.3 rom can cause efs issues. So is it better if i flash a sammy 4.3 rom with odin? And then I can flash a rooting kerenel and a recovery right??
Click to expand...
Click to collapse
it is correct that it can come to problems when upgrading from 4.1.2 to 4.3 because Samsung introduced some changes that also effect EFS (e.g search for EFS v2). There are a few threads already that mention how to upgrade the best way, hence I would propose you to search them as I did not upgrade to a Samsung based 4.3 rom due to the fact that I am using SlimBean (AOSP based). Therefore I do not want to recommend you things that might be wrong.
For example http://forum.xda-developers.com/showthread.php?t=2565599 same question
Sent from my GT-I9300 using xda app-developers app
Does anyone have a backup of a rooted stock Sprint rom file? Please no odin and it can be any version. Someone must have a nandroid backup that they can send me? Thanks
vvette said:
Does anyone have a backup of a rooted stock Sprint rom file? Please no odin and it can be any version. Someone must have a nandroid backup that they can send me? Thanks
Click to expand...
Click to collapse
good luck most nandroids contain personal info. whats wrong with odin. if you can flash a nondroid you obviously are on a custom recovery. so why not just odin flash a recovery then flash superuser zip and its rooted. why do you need a nandroid containing someones info lol
kaos420 said:
good luck most nandroids contain personal info. whats wrong with odin. if you can flash a nondroid you obviously are on a custom recovery. so why not just odin flash a recovery then flash superuser zip and its rooted. why do you need a nandroid containing someones info lol
Click to expand...
Click to collapse
LOL, I see your point. Dont like to Odin anything so I was hoping to get a stock rooted rom so if I bring phone into Sprint.... Thanks anyway.
vvette said:
LOL, I see your point. Dont like to Odin anything so I was hoping to get a stock rooted rom so if I bring phone into Sprint.... Thanks anyway.
Click to expand...
Click to collapse
Here is my thread read the fifth paragraph maybe this will help http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 if you back up all your data to a PC desktop you can always do a factory reset, no root and no odin. enjoy !!!
jimzweb1 said:
Here is my thread read the fifth paragraph maybe this will help http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 if you back up all your data to a PC desktop you can always do a factory reset, no root and no odin. enjoy !!!
Click to expand...
Click to collapse
THanks but no file to download? Missing..
vvette said:
THanks but no file to download? Missing..
Click to expand...
Click to collapse
what do you need i got you lol
odin 3.09.3https://www.androidfilehost.com/?fid=23329332407584102
latest rom https://www.androidfilehost.com/?w=files&flid=23998
latest philz recovery https://www.androidfilehost.com/?fid=95887005526788262
latest superuser https://www.androidfilehost.com/?fid=95887005526788251
i even have latest stock recovery image. you can use flashify to flash it if your worried about sprint. or just reflash that tar in odin and your stock unrooted again. need another file pm me my android host is loaded with goodies if you look up kaos on there
Thanks is the zip file a rooted stock rom
kaos420 said:
what do you need i got you lol
odin 3.09.3https://www.androidfilehost.com/?fid=23329332407584102
latest rom https://www.androidfilehost.com/?w=files&flid=23998
latest philz recovery https://www.androidfilehost.com/?fid=95887005526788262
latest superuser https://www.androidfilehost.com/?fid=95887005526788251
i even have latest stock recovery image. you can use flashify to flash it if your worried about sprint. or just reflash that tar in odin and your stock unrooted again. need another file pm me my android host is loaded with goodies if you look up kaos on there
Click to expand...
Click to collapse
Thanks so much! Is the zip file a rooted stock rom?
No its stock nk4.odin flash then flash a recovery via Odin. Then just flash the superuser zip in the recovery boot up and rooted stock. Easiest way.
Sent from my 0x1 Note 3...... I love tep
---------- Post added at 07:41 PM ---------- Previous post was at 07:40 PM ----------
Anything note 3 I keep here
Sent from my 0x1 Note 3...... I love tep
---------- Post added at 07:42 PM ---------- Previous post was at 07:41 PM ----------
https://www.androidfilehost.com/?w=files&flid=13537
Sent from my 0x1 Note 3...... I love tep
hi guys;
i have a dead mt6582 phone (Condor C5) i tried to install the rom i downloaded from the officiel website using SP Tools
all went great but the phone still in a boot loop .
i dont have access to download mode so i tried flashing a costume recovery (CWM) & installed a several costume roms (zip) but none of them worked & the phone still in boot loop
any help is appreciated .
Have you ported this roms or they are already for your phone ?
hossam55 said:
Have you ported this roms or they are already for your phone ?
Click to expand...
Click to collapse
the rom i used with SP Tool is for my phone & i think the others too but how do i port them if they are not?
http://forum.xda-developers.com/showthread.php?t=2701283
---------- Post added at 07:06 PM ---------- Previous post was at 07:04 PM ----------
Why don't you reflash your stock rom ?
hossam55 said:
http://forum.xda-developers.com/showthread.php?t=2701283
---------- Post added at 07:06 PM ---------- Previous post was at 07:04 PM ----------
Why don't you reflash your stock rom ?
Click to expand...
Click to collapse
if u mean wipe data & factory reset i already tried that & didnt work
No i mean downloading the main rom which ur device come with it is called stock rom and flash it may be using sp flash tool i never used it before u may google
Ur device's name stock rom and downlad it
hossam55 said:
No i mean downloading the main rom which ur device come with it is called stock rom and flash it may be using sp flash tool i never used it before u may google
Ur device's name stock rom and downlad it
Click to expand...
Click to collapse
i did that in the first time ; flashed it with a stock rom downloaded from the officiel website of the phone using SP Tools & all went great but the phone still in boot loop
is there any other way??
That is all i know
Try porting but *NO* guarantee will work :/
HERE : http://www.mtkroms.com/p/custom-roms-for-mtk6582.html
Try whatever you want but If your boot.img is bootloop cause you need to search for it ...
Try www.needrom.com for Stock ROMs...
Hope I helped?
arshad145 said:
Try porting but *NO* guarantee will work :/
HERE : http://www.mtkroms.com/p/custom-roms-for-mtk6582.html
Try whatever you want but If your boot.img is bootloop cause you need to search for it ...
Try www.needrom.com for Stock ROMs...
Hope I helped?
Click to expand...
Click to collapse
i tried all the rom's from mtkroms.com i ported them but still didnt work
i tried flashing boot.img only from stock & costume rom's & again no success :crying:
is it possible that the problem is from the hardware not software?
Can't be hardware issue if you succeeded to flash via spft
---------- Post added at 21:53 ---------- Previous post was at 21:53 ----------
I guess I can't help anymore Sorry ...
thnx for all the replies but i still cant fix the problem
is there anyone who knows another way plz help