I Installed Siyah kernel on my S3 with german firmware ELL4. it all worked out good until i tried to set CPU to 1800Mhz. I definately did NOT check set on boot, nevertheless my s3 crashed and is now stuck in a bootloop.
Is there any possibility to remove the overclock without reflashing the whole firmware? thanks!
padampadam said:
I Installed Siyah kernel on my S3 with german firmware ELL4. it all worked out good until i tried to set CPU to 1800Mhz. I definately did NOT check set on boot, nevertheless my s3 crashed and is now stuck in a bootloop.
Is there any possibility to remove the overclock without reflashing the whole firmware? thanks!
Click to expand...
Click to collapse
you can flash one of the steaks profiles from the thread (e.g. battery saver or something). it should reset all values. you can find the download, if I am not wrong, in the Siyah development or discussion thread.
tried it, unfortunately it did not help!
padampadam said:
tried it, unfortunately it did not help!
Click to expand...
Click to collapse
did you try to reflash the kernel?
yes i did
padampadam said:
yes i did
Click to expand...
Click to collapse
hm, try to flash a stock kernel (you can find it in perka's stash. Otherwise try to reflash the stock rom (dirty and with wipe).
aw im so stupid, stock kernel!
thanks mate, got it back!
Edit:Can i reinstall siyah after i installed stock or will it bootloop again?
ok so no bootloop on stock kernel, butif i flash siyah -> again bootloop.
so where is the cpu setting stored because it somehow still has to be there?
Edit: found it: /data/.siyah
padampadam said:
ok so no bootloop on stock kernel, butif i flash siyah -> again bootloop.
so where is the cpu setting stored because it somehow still has to be there?
Edit: found it: /data/.siyah
Click to expand...
Click to collapse
Good to hear that it is working again . I guess the safest overclocking is to a max of 1.6ghz
Related
Hi, i just flashed the Siyah Kernel v1.3.7beta for SGS3 on my SGS2.
I was using the CyanogenMod 9 RC1.
Now i'm stuck at the logo screen, the one with the name of the cellphone and can't get into Recovery mode, but i can get into the Download Mode.
How can i get my phone working again?
Any help will be aprecciated.
How about flashing a kernel (which supports CM9) for the correct device?
reflash the original kernal included in the CM9 thread that should restore your phone.
I'm now downloading the Samsung Drivers to try flash the Siyah Kernel for the SGS2 through the ODIN, i was just afraid that doing this could get the situation worse.
oinkylicious said:
How about flashing a kernel (which supports CM9) for the correct device?
Click to expand...
Click to collapse
Seriously, right? WTF?
Ahdriel said:
Hi, i just flashed the Siyah Kernel v1.3.7beta for SGS3 on my SGS2.
Click to expand...
Click to collapse
Why did you think this would even remotely work? Would you actually try flashing a kernel meant for an SGS2 on an SGS?
Well, maybe you would...
I don't thinked that would work, but i haven't noticed it was for the SGS3 T_T
It was my fault, i need to pay more attention.
Flashed the right Siyah Kernel through the ODIN, phone working now
Thanks for all the help and sorry about my stupidity.
You know, i'm a noob (the video in the register form says that D
Thanks, cya.
As there is a lot of confusing post on the topic of the stock rom XWLPO, and my question is:
Is it safe to downgrade through odin/Nandroid restore the newest rom (XWLPO) with the Siyah kernel installed? As I don't want the Brick bug to kill my device.
...
MistahBungle said:
Yes. Brick is triggered by a flag in the kernel being on. Siyah doesn't have it.
Edit - As long as you don't wipe or whatever via CWM with a kernel which has that flag set to on, you should be fine.
Click to expand...
Click to collapse
Oh thanks for clearing that for me!
...
Hi Guys
I just change my kernel from siyah to dorimanx kernel, and then I installed cyanogenmod 10.1 in the 2nd rom.
I made a mistake to install gapps for cm 10.1 in my stock rom (1st rom). After that whenever I want to boot to my 1st rom it just stucks.
I've tried to wipe cache and dalvik cache in my 1st rom but it still stucks at the Dorimanx start up.
My Phone is Samsung Galaxy SII GT-I9100
Kernel : Dorimanx v7.47
2nd Rom : cm-10.1-20130221-NIGHTLY-i9100
Please help me solve this problem. Any help will be appreciated. Thanks
Flash your first rom again.
Rule number 1:
If you dont know what to do, wipe everything and start from scratch.
Lennyz1988 said:
Flash your first rom again.
Rule number 1:
If you dont know what to do, wipe everything and start from scratch.
Click to expand...
Click to collapse
Thanks for your reply.
I've flashed my kernel and it still didn't solve the problem.
maybe later I will wipe everything but right now I still want to try to solve this without formatting my 1st rom.
dreawf said:
Thanks for your reply.
I've flashed my kernel and it still didn't solve the problem.
maybe later I will wipe everything but right now I still want to try to solve this without formatting my 1st rom.
Click to expand...
Click to collapse
Wipe everything, especially /system and then reflash your ROM and your favorite kernel.
Go back to siyah.
Sent from the little guy
gastonw said:
Go back to siyah.
Sent from the little guy
Click to expand...
Click to collapse
I don't want to go back to siyah because right now siyah don't support 4.2.. thx though
Hum....siyah v6 does.
Sent from the little guy
big_bum said:
Wipe everything, especially /system and then reflash your ROM and your favorite kernel.
Click to expand...
Click to collapse
In the end I flash my rom. I don't think there is another way to restore my stock rom..
Thanks for your answer
gastonw said:
Hum....siyah v6 does.
Sent from the little guy
Click to expand...
Click to collapse
yeah but it still doesn't support dual boot.. So I will stick with dorimanx till it can support dual boot..
Hi guys,
I not sure how am i going to do this so I hope you guys can help me out. Currently i am using PA 3.15 rom in my Samsung Galaxy GT-I9300 and i think my kernel is stock kernel. My recovery boot is Teamwin.
Please correct me if i am wrong, this is the way which i understand how to flash Siyah Kernel.
1. Download Siyah kernel and put into my phone.
2. Go to recovery boot
3. Wipe cache and dalvik cache
4. Install Siyah kernel
5. Reboot
That's it right? Do i miss anything and is my system support the latest siyah kernel which is SiyahKernel s3-v1.9.1?
Please advice!!
Thanks a lot!!
6GDominator said:
Hi guys,
I not sure how am i going to do this so I hope you guys can help me out. Currently i am using PA 3.15 rom in my Samsung Galaxy GT-I9300 and i think my kernel is stock kernel. My recovery boot is Teamwin.
Please correct me if i am wrong, this is the way which i understand how to flash Siyah Kernel.
1. Download Siyah kernel and put into my phone.
2. Go to recovery boot
3. Wipe cache and dalvik cache
4. Install Siyah kernel
5. Reboot
That's it right? Do i miss anything and is my system support the latest siyah kernel which is SiyahKernel s3-v1.9.1?
Please advice!!
Thanks a lot!!
Click to expand...
Click to collapse
If that's what the instructions say that is what you do .
It is the instructions is it that you flash a Zip through CWM recovery .
You really need to read the thread again .
http://forum.xda-developers.com/showpost.php?p=27385880&postcount=5
Siyah Kernel Discussion Thread
jje
That is correct. After you have booted back into your ROM, I'd suggest you installed STweaks from Play Store.
Otherwise, read both the development thread and the Q&A thread.
Happy flashing!
6GDominator said:
Hi guys,
I not sure how am i going to do this so I hope you guys can help me out. Currently i am using PA 3.15 rom in my Samsung Galaxy GT-I9300 and i think my kernel is stock kernel. My recovery boot is Teamwin.
Please correct me if i am wrong, this is the way which i understand how to flash Siyah Kernel.
1. Download Siyah kernel and put into my phone.
2. Go to recovery boot
3. Wipe cache and dalvik cache
4. Install Siyah kernel
5. Reboot
That's it right? Do i miss anything and is my system support the latest siyah kernel which is SiyahKernel s3-v1.9.1?
Please advice!!
Thanks a lot!!
Click to expand...
Click to collapse
Download Odin, download Siyah tar file (gokhanmoral.com), boot phone into download mode (Odin mode), open Odin on your pc, click PDA button, select Siyah tar file, hit start. Not hard, mate
CyanogenModded Very China-like, from my Samsung Galaxy S III
LG Familyguy59/Beatsleigher
Thanks a lot guys!! I just wondering how good is this latest Siyah Kernel's battery life performance. Any comments which this? I just noticed my phone draining its battery quite drastically. Maybe i have to do something using the STweak app? Undervolting?
6GDominator said:
Thanks a lot guys!! I just wondering how good is this latest Siyah Kernel's battery life performance. Any comments which this? I just noticed my phone draining its battery quite drastically. Maybe i have to do something using the STweak app? Undervolting?
Click to expand...
Click to collapse
Check my profile, and look for my latest post in the MIUI polimorph thread, there's a comment to the ROM and to battery life.
CyanogenModded Very China-like, from my Samsung Galaxy S III
LG Familyguy59/Beatsleigher
familyguy59 said:
Check my profile, and look for my latest post in the MIUI polimorph thread, there's a comment to the ROM and to battery life.
CyanogenModded Very China-like, from my Samsung Galaxy S III
LG Familyguy59/Beatsleigher
Click to expand...
Click to collapse
Thanks! I just want to stick with PA 3.15 a while and see how this kernel does with it. Regarding your results, you do it with maximum usage on data/wireless and i wonder how much time you spend on the 'on screen'?
6GDominator said:
Thanks! I just want to stick with PA 3.15 a while and see how this kernel does with it. Regarding your results, you do it with maximum usage on data/wireless and i wonder how much time you spend on the 'on screen'?
Click to expand...
Click to collapse
just undervolt for 75mv.. it'd probably help ya.. and for a lil more.. reduce JUST A LITTLE BIT of the GPU levels.. but my suggestion is try perseus kernel.. it's awesome with battery.. and got more stweaks than siyah :good:
hit thanks if you want to thank them
mense onviteA
BHARGAV33 said:
just undervolt for 75mv.. it'd probably help ya.. and for a lil more.. reduce JUST A LITTLE BIT of the GPU levels.. but my suggestion is try perseus kernel.. it's awesome with battery.. and got more stweaks than siyah :good:
Click to expand...
Click to collapse
I am using PA 3.15 ROM. Does Perseus Kernel works with this ROM?
Just got to know that Perseus Kernel doesn't support PA ROM.
Please correct me if i am wrong
Here is the link
http://forum.xda-developers.com/showthread.php?t=1691401
6GDominator said:
I am using PA 3.15 ROM. Does Perseus Kernel works with this ROM?
Just got to know that Perseus Kernel doesn't support PA ROM.
Please correct me if i am wrong
Here is the link
http://forum.xda-developers.com/showthread.php?t=1691401
Click to expand...
Click to collapse
Yup.
Sent from my GT-I9300 using xda premium
ravitomar said:
Yup.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks for confirming. Any other kernel can i use in this situation?
Siyah?
Glebun said:
Siyah?
Click to expand...
Click to collapse
I am using Siyah Kernel 1.9.1 (latest) now.
6GDominator said:
I am using PA 3.15 ROM. Does Perseus Kernel works with this ROM?
Just got to know that Perseus Kernel doesn't support PA ROM.
Please correct me if i am wrong
Here is the link
http://forum.xda-developers.com/showthread.php?t=1691401
Click to expand...
Click to collapse
Siyah is the only option for battery saving on paranoid..
Black Screen when flashing 1.9.1 with CM 10.1
JJEgan said:
If that's what the instructions say that is what you do .
It is the instructions is it that you flash a Zip through CWM recovery .
You really need to read the thread again .
http://forum.xda-developers.com/showpost.php?p=27385880&postcount=5
Siyah Kernel Discussion Thread
jje
Click to expand...
Click to collapse
I currently run Siyah 1.8.9 with CM 10.1 nightly (20130218), and I've tried to flash Siyah 1.9.1 with both Odin (PC) and through CM recovery. Both ways end up with a black screen after the Siyah logo. I've wiped cache and dalvik as well and fixed permissions. I'm not sure what the problem is. Am I missing something in stweaks setup?
thanks in advance.
BHARGAV33 said:
Siyah is the only option for battery saving on paranoid..
Click to expand...
Click to collapse
I actually find Devil kernel (built from perseus sources) much better for battery saving on paranoid android. Its still in its infancy though. Feels faster too
Sent from my GT-I9300 using Tapatalk 2
tylerharms said:
I currently run Siyah 1.8.9 with CM 10.1 nightly (20130218), and I've tried to flash Siyah 1.9.1 with both Odin (PC) and through CM recovery. Both ways end up with a black screen after the Siyah logo. I've wiped cache and dalvik as well and fixed permissions. I'm not sure what the problem is. Am I missing something in stweaks setup?
thanks in advance.
Click to expand...
Click to collapse
I think you need to flash the latest nightly with factory reset.
Sent from my GT-I9300 using xda app-developers app
As the title says, I installed the wrong kernel when trying to root my phone... and now my phone wont boot
unfortunatly I don't know which kernel version I originally had so I'm a little worried that I'll have to spend all night trying every possible kernel version until it boots...
Can anyone suggest an easier way? is there a universal kernel that will get me at least to the menu section?
thanks for looking guys
Can you boot into Download mode? If so, which Android version are you on right now?
Yeah I can boot into download mode and I'm running version 4.1.2
I'm downloading I9100XWLSD_I9100MOBLSC_MOB.zip which I think is the original ROM and I'm hoping it comes with the original kernel as well...
I should just flash them both with odin right?
EDIT: download finished and I'm a little confused, there's 2 files within it
I9100XWLSD_I9100MOBLSC_I9100BULS1_HOME.tar.md5 and SS_DL.dll
I really have no idea what to do with these... do I remove the .md5 extension and unzip the .tar? help :S
booboob31 said:
Yeah I can boot into download mode and I'm running version 4.1.2
I'm downloading I9100XWLSD_I9100MOBLSC_MOB.zip which I think is the original ROM and I'm hoping it comes with the original kernel as well...
I should just flash them both with odin right?
EDIT: download finished and I'm a little confused, there's 2 files within it
I9100XWLSD_I9100MOBLSC_I9100BULS1_HOME.tar.md5 and SS_DL.dll
I really have no idea what to do with these... do I remove the .md5 extension and unzip the .tar? help :S
Click to expand...
Click to collapse
Yup, that should set things right.
BTW, which kernel did you flash?
immortalneo said:
Yup, that should set things right.
BTW, which kernel did you flash?
Click to expand...
Click to collapse
It was XWKDD_insecure.tar
booboob31 said:
It was XWKDD_insecure.tar
Click to expand...
Click to collapse
If you're interested in a little tinkering, you could try flashing Siyah v6 beta 5 kernel via odin, and see if your phone boots up. Siyah v6 supports JB 4.1.2, and it will replace your current kernel. So, theoretically, your phone should boot back up.
Maybe it was already clear, but just flash the Siyah kernel first, before you try flashing a whole rom. Flashing Siyah might solve the whole problem, and you will have root access afterwards.
Donnie Sins said:
Maybe it was already clear, but just flash the Siyah kernel first, before you try flashing a whole rom. Flashing Siyah might solve the whole problem, and you will have root access afterwards.
Click to expand...
Click to collapse
Yeah that's what I did Donnie and it worked a charm, thanks to both you and immortalneo. :highfive:
Just to confirm I can go ahead and install any rom now without fear of the "superbrick" bug? or would I still need to source an insecure kernel first?
Thanks again, it's a load off my mind
booboob31 said:
Yeah that's what I did Donnie and it worked a charm, thanks to both you and immortalneo. :highfive:
Just to confirm I can go ahead and install any rom now without fear of the "superbrick" bug? or would I still need to source an insecure kernel first?
Thanks again, it's a load off my mind
Click to expand...
Click to collapse
No problem, good for you.
This brickbug can only appear in stock 4.0.4 recovery, so you are safe.
You can try to flash other kernels (.zip files) as well through CWM. But pay attention that you search for the right ones, that are made for your device and your Android version.