Hello
I own Shiru Shogun 10 POWER tablet (is an analogue of RAMOS W30 but with 2gb of ram)
So I had issues with WIFI. It was constantly lagging and it losing signal (after rebooting it was ok for 5 mins)
I decided to change firmware.
I'vw downloaded docs.google.com/file/d/0B5eC02N-3b_iYV9jd1doM20wNDQ/edit?pli=1 (found on russian community 4pda.ru) for Ramos W30
entered CWM (preinstalled), made backup, flashed cache and davlik and applied update from SD card.
Pressed reboot system and my display turned off.
Now I cant turn it on.
No sign of life even when connecting charger.
Need help.
Sorry for bad english
Related
Hello Everyone,
I have Noir A10 by Qmobile and since morning I am having this problem. I had installed JMP ROM v 8 and it was working super fast for atleast a month or so. When I got up in the morning, I saw the wait logo(that appears when I boot up the phone). I waited for a few minutes but phone was stuck there. I tried to restart but it didnt respond. I took out the battery and turned it back on. It did turn on but display resolution had a problem. I could not see whole the screen. For instance when I browse to Application drawer, I am unable to see some of the Icons. I reset the phone to factory settings and restarted but had the same problem with display. Then I tried to reboot into recovery but it simply resets the phone to factory settings instead.
I have tried a couple of applications (ROM Manager, MobileUncle MTK Tools) too but the phone is reset to factory settings each time.
Thanks
I would have posted into relavant Noir A10 thread, but since I am a beginner it does not let me post there.
please you can send me the solution
i also finding this problem solution
i also finding this problem solution plzz give the solution :crying:
Hi Guys,
i have a serious problem with my mediapad 7. I dont use it very often since i've bought me a nexus 5. So it lays some weeks with no usage on my desk. Yesterday i've tried to start it, but it shuts down after reboot, with a battery is empty message. So i have loaded the battery the last night (it should be 100%) but today it still shuts down after booting with the empty battery message. Also, if it is connected at the charger during the boot process.
So i have booted in recovery mode (TWRP) and have wiped the whole system, installed it new and booted it up. Still battery error. So i have deleted the batterystats.bin file in recovery, but the problem remains.
My RomVersion is Cyanogenmod 10.2.
So. Before I begin to disassemble the tablet and change the battery, I wanted to ask if anyone has a tip for me here.
Best regards,
Jacob
If you formatted the data partition it's bricked. Data should just be wiped, w/o the media folder.
W/o a working nandroid backup, i once had to reflash the stock recovery via usb, then flash a rom with the dload method(sd card), stock 4.03 or the rooted variants Comec v2.1(didnt work for me) and CleanICE. As in CleanIce the Network Location service was missing, it was only good for reflashing TWRP and now being able to install roms thru it.
Hi guys! My phone has stopped working. When I turn it on, phone starts booting system and restarts, trying to boot again and restart... again and again and again... Sometimes when I've some luck it turns on, works while, sometimes more (last time few hours). But finally restart again and back to restarting and being unable to run system I've formated my phone, installed stock rom, wiped everything, got clear phone... but it didn't help. I've no idea what's going on. I hope you guys have some ideas! I've new account here and i can't paste link here how it's look like.
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Same issue here... Finally decided to upgrade the system from stock firmware, and got "error" when it rebooted the phone. Then "no command".
Darknezz89 said:
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Click to expand...
Click to collapse
I solved my issue by restoring Lollipop (v.39) with the tool from the wiko website and then performing the update again; the phone started again (at v.41) and I was able to download Marshmallow from the next system update.
Issue was probably caused by some configuration or application.
Still slowly downloading Marshmallow now, so cannot say anything about the next update, but I guess that will go well, since the phone is reset now.
Just to follow up: Marshmallow is working fine on my Wiko Fever, much better than Lollipop. Amazing update.
Instructions for others after having read some comments from other people experiencing issues with the upgrade:
- BACKUP all your data before upgrading from Lollipop to Marshmallow, as if you would buy a new phone; I luckily did, as I wanted to set the microSD from removable to internal
- remove the microSD and (after having a backup of all your data as per step above) format the card as FAT32 on your PC; better to have a clean MicroSD card for after the upgrade I think
- reboot the phone in recovery mode and do a: wipe cache+reset to factory settings
- once the phone is reset and started, proceed with upgrading to Marshmallow
- don't know if needed after the upgrade to do an additional wipe cache+factory settings reset, doesn't harm to do it though
- be unhappy for the hours lost in restoring the phone data + apps + reconfigure everything
- be happy of the improved phone software
Questions upon questions.
So, i got the notification for the update last week, and i saved it until today to install it. The file downloaded was just 7 mb, i had enough battery for the intallation of the update (30% recomended by the software), something got messed up and an error message with the dead android character appeared. I know i lost all my things contacts and sd card... tried to hard reset the damn thing and nothing. I already googled the problem and i found nothing similar to what i get, i'm stuck in the recovery screen and the phone doenst shut down, every time i force it, it just boots back up after 15 30 seconds. I got to be honest i tought it was just another update but aparently its a "new" operating androind system. They could have told me with a update log or something...
Hi all,
I've had this tablet for a long time, and have rooted it; but recently I put an application on that seems to have had a bad effect. It freezes after starting. (I've forgotten the name of the application I installed.). It could also be because I overclocked it too high or some setting I changed, I'm not really sure.
I have tried the various remedies suggested on the net, i.e. holding power and up volume buttons, until restart, followed by wiping the cache and factory resets. Nothing prevents the screen freeze; but the factory reset did give a different screen after starting, which did not respond either. The internal storage (recovery menu) show several entries; but I'm not sure which one might do anything). The external storage option does not have any entries, even with the SD card installed. I'm hoping someone here will be able to help me.
Here's what I know about the tablet:
It's the Pandigital white 7" screen
Android version 4.22 firmware 2.0.8
A23 processor
Model Q8H
I appreciate any help.
Thanks,
........ john