So I woke up this morning to find that my charger is broken! The part that plugs into the phone is completely bent, and I can't seem to find one anywhere. Does anyone know if the warranty from Verizon or HTC will cover the charger? It's still under the 1 year. Any help would be appreciated.
I don't think vzw covers the cables under warranty, but you should at least call.
If they don't help you out, try this:
http://shop.htcpedia.com/htc-dc-m400-micro-usb-data-cable.html
****EDIT****
In post 10, below, feralicious provides a link to the proper 12-pin USB cable (the Flyer and the Rezound have the same connectors).
It's white but it works.
Sent from my ADR6425LVW using Tapatalk
You can use a standard USB to micro USB cable.
I know any USB cable will work, that's what I'm using for right now, but they don't fit as snug as the cable that actually came with the phone. The normal USB cables feel too loose and wiggle around too much for my liking.
Sent from my HTC Rezound
The link is there to order a new one then, I doubt Verizon will replace it for free.
Yeah, that one is just a normal USB one. I contacted htc directly and I think they might replace it. Hopefully anyway..
Sent from my HTC Rezound
Odd result: a standard USB to micro USB cable from monoprice doesn't actually charge my phone even though the phone claims to be charging AC, the HTC USB cable does.
Anyone else notice anything like this?
Very odd, I'm using a standard charger to charge my phone for the time being and it charges fine. It just doesn't feel secure enough is all. It is an HTC branded charger though. Don't know if that makes a difference.
Ozy666 said:
Odd result: a standard USB to micro USB cable from monoprice doesn't actually charge my phone even though the phone claims to be charging AC, the HTC USB cable does.
Anyone else notice anything like this?
Click to expand...
Click to collapse
Sent from my HTC Rezound
http://forum.xda-developers.com/showthread.php?t=1358806&page=3
This thread is about the OEM charge cables. In case you need to order one. The one linked at the bottom of post #21. The DC T500 is the part number. Most places only have it in white though.
TwinkleStarz said:
Yeah, that one is just a normal USB one. I contacted htc directly and I think they might replace it. Hopefully anyway..
Sent from my HTC Rezound
Click to expand...
Click to collapse
This one fits snug with that snap in you get from the original one. I bought two of them and they work great. I just wish they were black.
http://www.expansys-usa.com/htc-flyer-data-cable-dc-t500-extmicro-usb-12pin-white-209995/
Thank you everyone for your help. I called Verizon and they were willing to replace it but they don't even have the ability to order the same cable that came with the phone, they only had standard cables. So I actually ended up calling HTC customer service directly, and they sent a new charger & cable no questions asked! They didn't even require me to send the broken one back to them. Thinking I will be calling them first thing with any problems I have from now on!
Sent from my HTC Rezound
Does anyone know yet if this:
http://www.clove.co.uk/htc-one-x-cr-s650-desktop-cradle-with-speakers-99h10722-00
will work with the X+?
No, but the one for the AT&T one X should work perfectly IIRC.
"Put AT&T's One X and One X+ side-by-side, and other than the color difference you'd be hard-pressed to tell them apart. The carrier's logo is slightly different, but that's about it -- even the docking pins in the back line up perfectly."
I'm not allowed to post links yet, if you want the source, just google the above quote in quotes.
Kingsmith said:
No, but the one for the AT&T one X should work perfectly IIRC.
"Put AT&T's One X and One X+ side-by-side, and other than the color difference you'd be hard-pressed to tell them apart. The carrier's logo is slightly different, but that's about it -- even the docking pins in the back line up perfectly."
I'm not allowed to post links yet, if you want the source, just google the above quote in quotes.
Click to expand...
Click to collapse
Will do. Much obliged for that nugget!
Mmmhhh... Thought the same, but expansys EXPLICITLY states it's NOT compatible with the One X+ - whatever the reason might be.
Hi!
The CRS650 desktop cradle and the One X+ work together, but the One X+ doesn't have a dockmode..
So the cradle is only used as a charging device..
Enough for me
Kuni6774 said:
Hi!
The CRS650 desktop cradle and the One X+ work together, but the One X+ doesn't have a dockmode..
So the cradle is only used as a charging device..
Enough for me
Click to expand...
Click to collapse
Is it possible to extract the necessary things for the dockmode from the normal One X and to shift them to the One X+?
I only have the One X+ so i can't looking for it on the normal X.
that looks good but quite dear for what it is
Kuni6774 said:
Hi!
The CRS650 desktop cradle and the One X+ work together, but the One X+ doesn't have a dockmode..
So the cradle is only used as a charging device..
Enough for me
Click to expand...
Click to collapse
i have the att one x + and the HTC CR s650 dock and it does not fit. i hope this helps anyone thinking about making the purchase based on incorrect rumors.
Eltahur said:
i have the att one x + and the HTC CR s650 dock and it does not fit. i hope this helps anyone thinking about making the purchase based on incorrect rumors.
Click to expand...
Click to collapse
Sorry, but it works for me..
Using ARHD, but worked with stocked rom either..
Phone is beeing charged..
Landscape Rosie mod for custom rom now flips the screen also in dock..
Anyone tried any docks with the AT&T HOX+? I'm looking to replace my crappy old alarm clock and would prefer something that doesn't use the micro USB, but I've been unable to find anything. The HTC CR s650 seems to only work with the international HOX+, correct?
Doesn't work with one x+
I had the HTC One x and bought the speaker cradle from their website links, when my one x broke I got a one X+ as I thought all the accessories would work, physically they're identical, all cases work, but the dock doesn't work, it charges the phone but doesn't play audio.
There's no good reason for this, as the phones are virtually identical save for a few internal differences.
Rooted International HOX+ with Custom ViperX 1.0.1 ROM shows now dockmode, when connected to cradle CRS650 and works perfectly using all benefits from the cradle (charging and speakers)..
I had a One X (original dual core version) and it DOES NOT FIT the CR650 dock 100%. if you wiggle it around it will work for a second or so, but the international version and the AT&T version of the original One X have a slightly different POGO layout. Assuming the AT&T X+ has that same layout as the original AT&T One X, it wont fit. When I looked at my old One X with my AT&T One X+, the pogo pins look like they are in the exact same spot.
REF:
http://shop.htcpedia.com/htc-one-x-dock-cradle-cr-s650.html
Please note: This will NOT fit AT&T HTC One X
Hi there,
just for your information: I have the CR S650 and the international HOX+ here. Charging and speakers work as they should, but theres no dedicated dock mode in terms of software. The HOX+ will rotate when lying in the dock, but the dock app is missing. If you need it back, you have to flash a custom ROM like InsertCoin...
-Vulture- said:
If you need it back, you have to flash a custom ROM like InsertCoin...
Click to expand...
Click to collapse
No need to flash custom ROM. For dock mode on stock ROM just install two applications: DockMode.apk and HTC_Dock_Screen.apk. That is all. Tested on HOX + international with ROM 1.17.401.1.
CR-S650 modification for AT&T HOX+
After seeing someone mod the CR-S650 to fit the AT&T HOX, I ordered the dock and modified it to work with the HOX+. It was actually a lot easier than I thought because the POGO pins are only shifted over 1 space. So I took it apart, drilled a hole one space over and moved the entire POGO board over 1 slot. Now I have a working CR-S660 for my AT&T HOX+!
Moving the POGO pins over 1 slot lines up w/ the phone horizontally, but it's still a bit off vertically. I had to shave off the two small plastic tabs on the botton of the dock. This most likely means that I won't be able to use a case w/ the phone, but still very happy to have a working dock w/ POGO pins.
dafob said:
After seeing someone mod the CR-S650 to fit the AT&T HOX, I ordered the dock and modified it to work with the HOX+. It was actually a lot easier than I thought because the POGO pins are only shifted over 1 space. So I took it apart, drilled a hole one space over and moved the entire POGO board over 1 slot. Now I have a working CR-S660 for my AT&T HOX+!
Moving the POGO pins over 1 slot lines up w/ the phone horizontally, but it's still a bit off vertically. I had to shave off the two small plastic tabs on the botton of the dock. This most likely means that I won't be able to use a case w/ the phone, but still very happy to have a working dock w/ POGO pins.
Click to expand...
Click to collapse
Interesting...so HTC used a different polycarbonat housing for the ATT Hox+? Why did they do such a thing? Are there also different accessoires like car holder and so on which are using the POGO pins?
jirkab said:
No need to flash custom ROM. For dock mode on stock ROM just install two applications: DockMode.apk and HTC_Dock_Screen.apk. That is all. Tested on HOX + international with ROM 1.17.401.1.
Click to expand...
Click to collapse
Tested with HOX+ white, and works great, so many thanks!
robinbg said:
I had the HTC One x and bought the speaker cradle from their website links, when my one x broke I got a one X+ as I thought all the accessories would work, physically they're identical, all cases work, but the dock doesn't work, it charges the phone but doesn't play audio.
There's no good reason for this, as the phones are virtually identical save for a few internal differences.
Click to expand...
Click to collapse
-Vulture- said:
Hi there,
just for your information: I have the CR S650 and the international HOX+ here. Charging and speakers work as they should, but theres no dedicated dock mode in terms of software. The HOX+ will rotate when lying in the dock, but the dock app is missing. If you need it back, you have to flash a custom ROM like InsertCoin...
Click to expand...
Click to collapse
So it plays audio or not ? I do not care about dock mode, i just want it to work as alarm clock. I'm talking about HOX+ black international version with red buttons and tegra3.
?
It does play audio via music player and of course system sounds (ringtone, sms, alarm...), but no loudspeaker during calls. But thats more a problem of the jelly bean update from HTC since it worked with ICS. And i have the One X+ you described, international version.
Has anyone noticed this? Specifically with chargers?
I was trying to charge my phone, I didn't use my regular samsung charger though, I used one I purchased at Wal-Mart but while it was plugged in, I couldn't use the phone... I thought that was really weird, and annoying, does anyone else have this problem?
snapbux said:
Has anyone noticed this? Specifically with chargers?
I was trying to charge my phone, I didn't use my regular samsung charger though, I used one I purchased at Wal-Mart but while it was plugged in, I couldn't use the phone... I thought that was really weird, and annoying, does anyone else have this problem?
Click to expand...
Click to collapse
Please provide more information if expect to have an answer - phone model, phone software, modem - at least
This happens when cheap unshielded/unbalanced chargers are used. The charging current can be so "dirty" it makes my Galaxy Tab go haywire, requirinq a reboot.
Sent from my HTC Sensation XL with Beats Audio X315e (loaner because of sudden death S3)
Hey,
I am trying to attach a palm wireless charging adapter to my htc one x+ via the pogo pins. I am having difficulty making good contact with them.
Has anyone come up with a good solution? I saw a post by someone who had a pogo pin circuit board. I have no idea where he bought it. I'm really just trying to get a solid connection with the pogo pins so I'm open to any ideas.
Thanks!
http://www.google.com/translate?hl=...eitung-induktionslade-mod-fuer-das-one-x.html
Just letting you guys know that I followed this guide for the one x and It worked perfectly. I havent tested nfc, but I did the trick so it should work. I'll post photos later but right now my phone is my only camera.
...
starfox5194 said:
Just letting you guys know that I followed this guide for the one x and It worked perfectly. I havent tested nfc, but I did the trick so it should work. I'll post photos later but right now my phone is my only camera.
Click to expand...
Click to collapse
This is nuts. I love it and would try it if I was more comfortable with soldering/engineering.
Someone tried it for the one xl and it ended up causing issues because of the touch pad
Slithered from my HTC One X+
im planning to make one..but i feel like its too intrusive so ill just look for a nice thin casing and put it in between. does anybody know which pogo pin is negative or positive?
Sent from my HTC One X+ using Tapatalk 2