Related
I'am running on 4.0.4 Chinese leak and I wanna go back to 2.3 Stock, and I just simply can't. I don't know what I'm doing wrong. Nothing is working.
1. Dual Wipe
2. Flash 2.3.6 EU
3. Dual Wipe
4. Going to BP Tools - Here phone stuck on Motorola Logo with Costumer Error.
5. I've tried flash only Radio to force flashing GB radio version. Radio flashed on phone screen but after that phone still stucks on Motorola logo with error ( BP tools ofc)
I'm using Fla**** but I noticed that in bat file there's not cdt.bin flash command when I adding it I'm getting error "preflashing validation failur" Maybe this is a problem? What can couse it?
after return to the GB is very heavy, some write that almost impossible
pok5 said:
I'am running on 4.0.4 Chinese leak and I wanna go back to 2.3 Stock, and I just simply can't. I don't know what I'm doing wrong. Nothing is working.
1. Dual Wipe
2. Flash 2.3.6 EU
3. Dual Wipe
4. Going to BP Tools - Here phone stuck on Motorola Logo with Costumer Error.
5. I've tried flash only Radio to force flashing GB radio version. Radio flashed on phone screen but after that phone still stucks on Motorola logo with error ( BP tools ofc)
I'm using Fla**** but I noticed that in bat file there's not cdt.bin flash command when I adding it I'm getting error "preflashing validation failur" Maybe this is a problem? What can couse it?
Click to expand...
Click to collapse
first of all you flash ics china again
root it
then restore mmcblk1p18 by terminal or connectbot ( the codes are available )
then flash your GB rom.
it would work.
I did it once.
This is some idea are you sure it works?
I didn't do it becouse everyone said to flash GB first and after booting up GB root and restore that file. I just don't wanna stuck with nothing but if I switch this files again on chinese leak. That error message should disappear and I can flash GB, but if it disappear and my phone still stuck on "M" Im end up with "M"- brick phone... ehh
pok5 said:
This is some idea are you sure it works?
I didn't do it becouse everyone said to flash GB first and after booting up GB root and restore that file. I just don't wanna stuck with nothing but if I switch this files again on chinese leak. That error message should disappear and I can flash GB, but if it disappear and my phone still stuck on "M" Im end up with "M"- brick phone... ehh
Click to expand...
Click to collapse
This is the correct way. If you have any trouble flashing you'll be able to flash chinese ics and try downgrade as many times as needed.
Cheers
Sent from my XT910 using Tapatalk 2
Ok I think I'am brick my phone now I replaced orginal file again and flashed back 2.3.6 and of course stuck on M logo... Of course Im without Customer Error now and I can't flash chinese back... There is something I can do now?
pok5 said:
Ok I think I'am brick my phone now I replaced orginal file again and flashed back 2.3.6 and of course stuck on M logo... Of course Im without Customer Error now and I can't flash chinese back... There is something I can do now?
Click to expand...
Click to collapse
Flash the 2.3.6 T-Mobile, if there are flash failes, delete the showed lines in the xml until the flash is finished. Then install the german ICS leak with moto recovery, then you should get a full working system without root, but better than brick. And be patient a few days to the release of the official ICS, we should get fastboot files, and maybe we will get a new root method tomorrow...
dtrail1 said:
Flash the 2.3.6 T-Mobile, if there are flash failes, delete the showed lines in the xml until the flash is finished. Then install the german ICS leak with moto recovery, then you should get a full working system without root, but better than brick. And be patient a few days to the release of the official ICS, we should get fastboot files, and maybe we will get a new root method tomorrow...
Click to expand...
Click to collapse
I love you! Even T-Mobile GB is booted up and working!
pok5 said:
I love you! Even T-Mobile GB is booted up and working!
Click to expand...
Click to collapse
You got luck, man, really! Now you should be ablr to flash any other gb rom or custom roms..
Gesendet von meinem XT910 mit Tapatalk 2
pok5 said:
I love you! Even T-Mobile GB is booted up and working!
Click to expand...
Click to collapse
GB T-mobile work without ID Error and Bptools login?
bogante said:
GB T-mobile work without ID Error and Bptools login?
Click to expand...
Click to collapse
Yes it worked for me, but I don't reffer to do it becouse it could be only luck. I flashed tmobile GB with Fla**** I rewrote all command. I personally think that deleting storage data command helped to boot up GB becouse when I flashed other roms without it phone never flash radio right after flashing.
Sent from my XT910 using XDA
can someone write the exact instructions on how to restore the android 4.0 GB of Chines leak or nandroid
underface said:
can someone write the exact instructions on how to restore the android 4.0 GB of Chines leak or nandroid
Click to expand...
Click to collapse
these are the steps I've had followed
1. flash gb from your region
2. root with motofail if the 2.3.6 or zergbrush if 2.3.5
3. restore the p18 file
Code:
adb shell
su
cat /sdcard-ext/mmcblk1p18-go > /dev/block/mmcblk1p18
4. flash gb again
hint1:
1. you'll have to boot under bp tools 'till step 4.
2. rooting is hard becouse you've to reboot it several times and must enter via bp tools. I just forced starting bp tools by holding both vol buttons during the process.
Cheers
I restored my mmcblk1p18 before downgrade but would only advise this if you have sufficient battery or factory cable.
Sent from my XT910 using XDA
what is it mmcblk1p18
---------- Post added at 10:57 PM ---------- Previous post was at 10:42 PM ----------
pedrotorresfilho said:
these are the steps I've had followed
1. flash gb from your region
Click to expand...
Click to collapse
by rsd lite?
in terminal after flashing to 2.3.6 or 2.3.5?
pedrotorresfilho said:
Code:
adb shell
su
cat /sdcard-ext/mmcblk1p18-go > /dev/block/mmcblk1p18
4. flash gb again
Click to expand...
Click to collapse
pedrotorresfilho said:
hint1:
1. you'll have to boot under bp tools 'till step 4.
2. rooting is hard becouse you've to reboot it several times and must enter via bp tools. I just forced starting bp tools by holding both vol buttons during the process.
Click to expand...
Click to collapse
I do not understand this tips
underface said:
what is it mmcblk1p18
Click to expand...
Click to collapse
Its a dev razr partiton bkp folks ate restoring in regular razr to bypass region signature verification. This hack was presented to us by a chinese dev.
Cheers
Sent from my XT910 using Tapatalk 2
where i can get it
after this all operations, i can flash to my first soft and i restore warranty?
thanks for help
i'm big noob
underface said:
where i can get it
after this all operations, i can flash to my first soft and i restore warranty?
thanks for help
i'm big noob
Click to expand...
Click to collapse
Hi, this is not recommended for non experienced users, at least. You can brick your phone trying. Thanks
Sent from my XT910 using Tapatalk 2
Ok guys, I dont ask questions in here lightly, when I ask a question its only after hours of (fruitless) searching. I was invited to the soak test for the ICS update, BUT there were still traces of root on the handset so it kept failing, SO I tried the droid utility to un-root but for some reason pressed the wrong option (I know I know) and it attempted to load a version of firmware incompatible with my razr. SO I got the ap flash fail message and nothing else - a couple of hours later and about 15gb of files to flash through RSD lite, I am still no better off, I just can't find the right image, there is one that appears to install, but then it wont boot and goes instead to the ap fastboot screen boot fail.
Is my device dead? Or fixable? I have tried getting version info from the Moto website but they need the IMEI (which I have) AND a serial number which I DONT have, I have no idea why I tossed the box, nbot like me as I dont keep phones for long but for whatever reason I did.
The phone was second hand and has NO operator branding on it at all so I assume its retail, It was on 2.3.6. Please please someone tell me it's not as bad as it appears!!
if u got ap flash error.. I'm sure u just the right rom to flash via RSD lite n u should be ok.. try give some more info if u can.. like are u xt910 or xt912?
Sent from my XT910 using xda app-developers app
Mobzter said:
if u got ap flash error.. I'm sure u just the right rom to flash via RSD lite n u should be ok.. try give some more info if u can.. like are u xt910 or xt912?
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
The only details I can access are on the back of the handset - Its the XT910, I know the IMEI number but thats not relevant,
The back also says, Type: MOC2E Fcc Id IHDP56ME2 Ic Id 1090 - P56ME2,
That is all I know, the phone has no operator software installed that I ever saw so I am guessing its a sim free retail model.
I have tried every eu fastboot flash file I can find, (about a dozen of them) I'm scared the battery will run out and leave me completely stuffed!
You can only flash phone with ICS fastboot not gingerbread firmware.
There are couple ICS fastboot leaked by sbf.droid-developers.com, download ICS firmware and flash phone with RSD lite. good luck.
kent_lkc said:
You can only flash phone with ICS fastboot not gingerbread firmware.
There are couple ICS fastboot leaked by sbf.droid-developers.com, download ICS firmware and flash phone with RSD lite. good luck.
Click to expand...
Click to collapse
I have tried every british fastboot on their site and nothing will flash.
Any ideas?
Try the EU ICS Fastboot
http://forum.xda-developers.com/showthread.php?p=29242699
Sent from my CustomiZed XT910
HSD-Pilot said:
Try the EU ICS Fastboot
http://forum.xda-developers.com/showthread.php?p=29242699
Sent from my CustomiZed XT910
Click to expand...
Click to collapse
Whilst I wait the HOUR its taking to download the ICS build, I am working my way through EVERY other fastboot file on that site, so far done 12 and nothing
That's bad. An long night for you i guess :sly:
Sent from my CustomiZed XT910
HSD-Pilot said:
That's bad. An long night for you i guess :sly:
Sent from my CustomiZed XT910
Click to expand...
Click to collapse
<ust get to bed will leave it all downloading and try the rest tomorrow, thanks for helping thus far
Questions belong in Q&A
HSD-Pilot said:
Try the EU ICS Fastboot
http://forum.xda-developers.com/showthread.php?p=29242699
Sent from my CustomiZed XT910
Click to expand...
Click to collapse
Downloaded it eventually and although it installs through rsd lite, it still WON'T BOOT, this time I get the fastboot error boot fail.
I tried it several hundred times, I'm getting very desperate!!
Chipster69 said:
Downloaded it eventually and although it installs through rsd lite, it still WON'T BOOT, this time I get the fastboot error boot fail.
I tried it several hundred times, I'm getting very desperate!!
Click to expand...
Click to collapse
And now my battery is dying, and I tried the fastboot charge workaround and it doesn't workaround for me at all.
Please someone help me out, I have googled for hours and tried a million things and nothing helps
Hi
I have update the radio for [OTA]672.180.41.XT910.NonEFIGSRetail.en.EU, because that have problems with GPS, status, (tracking satelites)
Took the radio file from [OTA] 672.180.41.XT910.Retail.en.EU and use the "Whirleyes" Bootmenu Manager downloaded from Google play.
Instructions Metode 1:
1. Root the your Razr
2. Download "Bootmeny Manager" from Google Play. ( Update it)
3. Unpack the zip OTA] 672.180.41.XT910.Retail.en.EU to a new folder
4. Copy the radio img. ( bp.img : 25 126 kb) you find in the new folder to external SDcard.
5. Reboot the phone with Bootmeny, use "Custom Recovery"
6. Choose flash radio img. and find the image location at your sdcard.
7. Flash it.
Instructions Metode 2:
Here are we using "fastboot flash" metode You don't need to root your phone.
First:
Download flash tools with radio.img :
https://hotfile.com/dl/169162468/ec1c0cb/Radio_flash.rar.html
1. Enable "USB degugging" i phone, go to menu "system settings" and look in "developer options"
2. Connect your phonewith the with USB - cabel
3. Open the downloaded radio.img with flash tools, unrar it, then hit start "Start here"
4. Write "adb reboot bootloader, then hit enter (phone goes in fastboot mode")
5. Write "fastboot flash radio radio.img" then hit enter
Radio.img is now flashed and just reboot your phone.
NB: Maybe you need Factory reset to get it work well.
Done:laugh:
NB: I see the differense between those radio image "bp_U_04.10.00R" is 2 Kb: NonEFIGSRetail.en.EU radio img is : 25 124 Kb and Retail.EU is 25 126 Kb
Thats why the GPS is fully working with replasment of images
Now your GPSwith status should work great, Also Wifi, 2G and 3G work good for me
Many thanks to "Whirleyes" for his Bootmenu Manager. :good:
Could you upload the radio please?
dtrail1 said:
Could you upload the radio please?
Click to expand...
Click to collapse
Here is the link to Radio img. for 672.180.41.XT910.Retail.en.EU ( bp_U_04.10.00R) to use in the OTA -.NonEFIGSRetail.en.EU:
https://hotfile.com/dl/169043207/7054caf/bp_U_04.10.00R.rar.html
GPS with status work great, 2G, 3G and Wifi works good after nearly 3 days of use now:good:
Batteri: I have 70% left after 1 day and 8hr use. since last charge,
I'm happy with this so far.
this is the same version as used in .33, I guess..
Moto RAZR - BW AOKP - Tapatalk 2
dtrail1 said:
this is the same version as used in .33, I guess..
Click to expand...
Click to collapse
I don't know if it is the same version as in 33.
But the file in radio img. is 2Kb bigger in 672.180.41.XT910.Retail.en.EU or the 41.XT910.NonEFIGSRetail radio img. They have the same version number (bp_U_04.10.00R).
Therefore I use Retail EU radio version and the different helps me in Norway
Hey OP! You should update your guide to flash radio.img from the .41 fmz leaked.
Would be a lot easier to
Code:
fastboot flash radio radio.img
Cheers
If you have access to a PC - yes, I agree. The other method only requires the phone, but you have to be rooted. So, there are pros and cons of each method.
BTW, I ran into trouble when flashing radios via BootMenu Manager (assert failed... errors after flashing an Asian radio), but I managed to recover by fastbooting radio.img from the .41 SBF.
Sent from my XT910
It really can update radio asia?
Sent from my XT910 using xda app-developers app
pedrotorresfilho said:
Hey OP! You should update your guide to flash radio.img from the .41 fmz leaked.
Would be a lot easier to
Code:
fastboot flash radio radio.img
Cheers
Click to expand...
Click to collapse
I have update the OP with an easier flashing metode of radio.img.
See: Instructions Metode 2:
:good:
I presume this method also works for http://forum.xda-developers.com/showthread.php?t=1850683?
The radio on official retail british is awful, no gps lock and bad wifi
I get GPS fix in few seconds, also WiFi works as usual (i.e. great) using the radio from .41 SBF.
Sent from my XT910
TheMask1 said:
Hi
Instructions Metode 2:
........
4. Write "adb reboot bootloader, then hit enter (phone goes in fastboot mode")
5. Write "fasboot flash radio radio.img" then hit enter
Radio.img is now flashed and just reboot your phone.:
Click to expand...
Click to collapse
Thank you for sharing.
I follow the step and did not work.....and finally I find that in step 5.......fasboot should be fastboot.:cyclops:
rexren said:
Thank you for sharing.
I follow the step and did not work.....and finally I find that in step 5.......fasboot should be fastboot.:cyclops:
Click to expand...
Click to collapse
Thank You,
I've Fix it now :good:
sorry guys ı did it
I had error when starting the phone up again from using the fastboot method, so I just cleared the cache partition (FYI).
Will this improve things for a stock GB XT910 US?
Is this thread out of date?
No, why ask? There's been no update to .41.
Sent from my XT910
No one's responded to my question.
I just bought an XT910 that's locked to Rogers Canada. I want to install the latest radio, unlock, recovery, and MIUI, but information is scattered all over the place and I can't find straight answers. Want to use it on TMobile, Washington state.
No idea if this radio is right for this phone. No idea what the best recovery is, as there are so many and some are old. I can't even determine whether the xt912 is cdma, or the gsm model with heavier battery, because there's conflicting info. Whether there's an xt910 that's cdma.
No one's responded to my radio question here either:
http://forum.xda-developers.com/showthread.php?p=32719347#post32719347
XT910 is the non-CDMA version. However, there is a regional lock in the bootloader, so this firmware won't work for you. Please find a thread with American/Canadian firmwares, they will update radio firmware as well. For a custom recovery go to BootMenu Manager or SafeStrap threads.
Sent from my XT910
Hey! I were about to flash cm11 4.4.2 via a guide, I did everything as it said but when he restarted the motorola logo came up and then after that it all went black, can't go in cwm.
Yes, I am rooted.
Yes, I had cwm recovery.
I had version 4.0.4 before flashing.
I followed every step it said and then it screwed up.
Any help?
I've never worked with motorola devices so I don't know how to use the RSD etc.
I can access the Bootloader and then go inside recovery and AP Fastboot but it says it's locked. I can also access stock recovery from that. I tried to another rom from that recovery but it says Signature verification failed.
Download the right Fastboot files for your phone and then use RSD lite to return to stock
Edit: Locked means that your Bootloader is locked which is normal because the Droid RAZR bootloader cannot be unlocked.
DeathChaos said:
Download the right Fastboot files for your phone and then use RSD lite to return to stock
Edit: Locked means that your Bootloader is locked which is normal because the Droid RAZR bootloader cannot be unlocked.
Click to expand...
Click to collapse
What is the right files? I searched tutorials how to use rsd but didn't find any so more help would be appreciated.
Thanks anyway
addemod said:
What is the right files? I searched tutorials how to use rsd but didn't find any so more help would be appreciated.
Thanks anyway
Click to expand...
Click to collapse
sbf(dot)droid-developers(dot)org
Sry i can not post direct links
on this site you find all firmwares but be aware that there are files for the XT910(Euro version) and the XT912(Verizon version)
DeathChaos said:
sbf(dot)droid-developers(dot)org
Sry i can not post direct links
on this site you find all firmwares but be aware that there are files for the XT910(Euro version) and the XT912(Verizon version)
Click to expand...
Click to collapse
Okay, I got an European 4.0.4 firmware. Now what?
(Blur_Version.672.180.41.XT910.NonEFIGSRetail.en.EU)
I don't know what firmware I should download either..?
I were on 4.0.4 before trying to flash.
addemod said:
Okay, I got an European 4.0.4 firmware. Now what?
(Blur_Version.672.180.41.XT910.NonEFIGSRetail.en.EU)
I don't know what firmware I should download either..?
I were on 4.0.4 before trying to flash.
Click to expand...
Click to collapse
Basically you can download every firmware for the XT910 model which is the same version or higher than you was before
Okay, now what? What do I do with that zip folder?
Sent from my GT-N7105 using XDA Premium 4 mobile app
Open it with RSD Lite
Power up your phone in AP Fastboot
Connect your phone to PC
Rsd should recognize it
Then press start
DeathChaos said:
Open it with RSD Lite
Power up your phone in AP Fastboot
Connect your phone to PC
Rsd should recognize it
Then press start
Click to expand...
Click to collapse
What if it doesn't recognize it?
Or.. how do I know if it is recognized?
addemod said:
What if it doesn't recognize it?
Or.. how do I know if it is recognized?
Click to expand...
Click to collapse
If it's not recognize you maybe need to install the motorola drivers
you can download it here
http://www.droidviews.com/android-usb-drivers-samsung-motorola-sony-lg-zte-htc-asus-huawei-acer/
DeathChaos said:
If it's not recognize you maybe need to install the motorola drivers
you can download it here
http://www.droidviews.com/android-usb-drivers-samsung-motorola-sony-lg-zte-htc-asus-huawei-acer/
Click to expand...
Click to collapse
Thanks man. Will edit this post how it went!
Edit 1:
Recognized and now I started the process.
Edit 2:
DONE. It rebooted and now I see the recovery android guy loading some stuff
Edit 3:
You're my hero. It works now! Thank you so much!!
Edit 4:
100th post :3
addemod said:
Thanks man. Will edit this post how it went!
Edit 1:
Recognized and now I started the process.
Edit 2:
DONE. It rebooted and now I see the recovery android guy loading some stuff
Edit 3:
You're my hero. It works now! Thank you so much!!
Click to expand...
Click to collapse
I'm glad that i could help you
hey...thanks for valuable posts...
My problem is I have erased my CID as earlier I had installed JB kernal & jelly bean stock firmware using BMM.... ( I had deleted CID as my mobile is from indian market hence no JB update released for this market hence deleted CID to flash JB kernel)
Now accidently I deleted slot-1 from BMM also format /data & /system.....unmount data/ then BRICKED ....
Its not booting only first logo is coming with error " Customerid error...Contact dealer, Boot to suspend/ TMCD:dead xxxxxxxxxxxxxx "
Now what to do ?? pl. help dears ....
Hi to all Razr users here! I know some of you have seen me that posts alot of questions and asking for a help on different forums and threads here in Motorola Razr world and now it's my time to give a contribution on how to fix a Moto Razr from being fully bricked with an error of 'CID error' or '0X0056' error. (YAY! JUST FIXED MINE A WHILE AGO!)
Scenario:
-My device is in stock 2.3.5 Gingerbread firmware.
-I've tried to flash a JB 4.1.2 firmware on my device via RSD lite v6.x
-My device got stuck and won't boot and got the '0X0056' error causing to not get past the Motorola logo.
Instructions on how to fix:
-In my own experience, you don't need to have a backup of your CID because it is not needed on the flashing stages.
-Make sure your device is still alive and has still juice to power the battery on.
-Download a firmware of your choice http://sbf.droid-developers.org/phone.php?device=10 (I've downloaded the fifth one *Fido Canada*)
-Extract the .xml file inside the firmware, open with notepad++ and delete the line where 'CDT.bin' exists then put it back to the firmware .zip
-Extract also the 'allow-mbmloader-flashing-mbm.bin' file.
-Make a .bat file using notepad and write this fastboot commands:
Code:
echo off
pause
fastboot erase cid.img
fastboot flash mbm allow-mbmloader-flashing-mbm.bin
fastboot erase userdata
fastboot reboot-bootloader
pause
echo on
(Make sure you have the latest fastboot files from Android SDK tools and have 'allow-mbmloader-flashing-mbm.bin' file within it, these stuff must be in the same folder)
-Connect your device and boot in AP fastboot then ran the command.
Note: I've ran this without any 'ERROR' code which prevents the files from wrtiting.
-Just stay connected with the device.
-Use the RSD lite and use the firmware you downloaded.
-Now click start.
-When you saw the device being shown with 'CID error' DO NOT DISCONNECT THE DEVICE, JUST LET IT GO ERRORING ITSELF.
-Wait for at least 30 seconds, after that the device will shutdown then it will boot again and you will see an Android is somewhat upgrading stuff. (YAY! this is the progress I've ****ted all the way off!)
-Press power button, volume down and up simultaneously and boot with BP tools.
-Wait and you'll see your device is reviving and booting again!
Note: To prevent the annoying 'CID error', someone said we must install BMM or SS recovery in order to get past and avoid that error whenever we reboot our device.
That's all! Happy fixing! Hope it helped you!
Notes:
turffe said:
Whatever happens before flashing anything, ALWAYS MAKE A BACKUP OF CID.
Click to expand...
Click to collapse
turffe said:
Remove that bootlogo & boot your device without BP tools you can do this - http://forum.xda-developers.com/showthread.php?t=2406867 .It removes CID err on bootlogo & you can boot normally. But if your bootlogo will be changed error will appear again. So you'll need to flash fix everytime your bootlogo changes...
Click to expand...
Click to collapse
Good... Congrats buddy! :good: :highfive:
hrishi21007 said:
Good... Congrats buddy! :good: :highfive:
Click to expand...
Click to collapse
Thank you Bro!
Very detailed guide. Might come in handy.
DROID RAZR with Tapatalk 4
neo.ank said:
Very detailed guide. Might come in handy.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Thank you @neo.ank for giving me every details you know
hi.
I have motorola razr xt910K version and installed android 4.1.2 in very similar way (was fighting 2 days with flashing...). Now is time to update it to 4.4.2. did you try that ? did you update ? I will test tomorrow how it will work with bmm because I'm using it to boot my phone. didn't know that safe strap will do the job as well... will test that as well
Regards,
siamer
siamer said:
hi.
I have motorola razr xt910K version and installed android 4.1.2 in very similar way (was fighting 2 days with flashing...). Now is time to update it to 4.4.2. did you try that ? did you update ? I will test tomorrow how it will work with bmm because I'm using it to boot my phone. didn't know that safe strap will do the job as well... will test that as well
Regards,
siamer
Click to expand...
Click to collapse
Hey! Sorry for the suuuuuuuuupeeer late reply :/
Anyway I was on stock ICS then jumped to 4.4.2 kitkat, just used BMM recovery and no problems so far on flashing
JovieBrett said:
Hey! Sorry for the suuuuuuuuupeeer late reply :/
Anyway I was on stock ICS then jumped to 4.4.2 kitkat, just used BMM recovery and no problems so far on flashing
Click to expand...
Click to collapse
I'm already installed mokee rom and today will try slim kat for now everything working perfekt Now will try play with safe strap maybe will work fine...
Thanks anyway for info!
siamer
siamer said:
I'm already installed mokee rom and today will try slim kat for now everything working perfekt Now will try play with safe strap maybe will work fine...
Thanks anyway for info!
siamer
Click to expand...
Click to collapse
Sounds good You're welcome.
Great guide mate!! I'm sure you are a life saver for the many bricks around.
JovieBrett said:
-Extract the .xml file inside the firmware, open with notepad++ and delete the line where 'CDT.bin' exists then put it back to the firmware .zip
!
Click to expand...
Click to collapse
A little addition to this guide based on personal experience:
I did this in several firmwares trying to unbrick my device but after CDT.bin deletion, RSD Lite won't start the flashing process followed by the message sayng that "some files are missing from original package" and "please add/replace them" or "try another package" etc etc
In that case, the ONLY thing that can help you unbrick your device is CID deletion via fastboot, letting you flash any firmware you want (the question is, however, which of them will actually boot after completing the flashing process without errors.
I tried several firmwares, actually all GSM versions and the only one that booted was Taiwanese stock retail ICS. After that, I upgraded stock FW to JB 4.1.2, again trying several FWs and this time the only one that booted was stock retail JB 4.1.2 for United Kingdom (?!). But, this doesn't matter much as long as you can unbrick your device, boot the stock, root it and install custom recovery and after that the choice is yours. My device was bricked the worst possible way (erased boot, system, data, recovery partitions and tables, all gone except fastboot, with a dying and unchargeable battery. So, I made the "factory cable" myself and started from scratch. After a fair amount of trouble, I did it, what you can see from my signature.
Anyway, deleting CID is no big thing, and trust me, you won't be missing it at all. If that's the price for making your device work again just go ahead, I think it's worth it.
Make backup of CID...
Does anyone tried that method, to make backup your CID?
If your XT910S/K soft bricked why not to try by flashing XT910 2.3.6 system.img? It should boot to Retail XT910 2.3.6 with XT910S/K kernel.
If you get boot you can try rooting it & backup CID with Terminal Emulator. When erase it...
Still... with ics(jb) you'll need be with erased CID, but having backup never hurts... I just wanna to help people save unique CID.
turffe said:
Does anyone tried that method, to make backup your CID?
If your XT910S/K soft bricked why not to try by flashing XT910 2.3.6 system.img? It should boot to Retail XT910 2.3.6 with XT910S/K kernel.
If you get boot you can try rooting it & backup CID with Terminal Emulator. When erase it...
Still... with ics(jb) you'll need be with erased CID, but having backup never hurts... I just wanna to help people save unique CID.
Click to expand...
Click to collapse
Will add a note on that, whatever happens a backup of CID is really needed if ever something happens badly And yup, I made a backup
I just wanted to be on stock ICS Im fine with that. THANKS! Sorry for the broken grammar.
turffe said:
Does anyone tried that method, to make backup your CID?
If your XT910S/K soft bricked why not to try by flashing XT910 2.3.6 system.img? It should boot to Retail XT910 2.3.6 with XT910S/K kernel.
If you get boot you can try rooting it & backup CID with Terminal Emulator. When erase it...
Still... with ics(jb) you'll need be with erased CID, but having backup never hurts... I just wanna to help people save unique CID.
Click to expand...
Click to collapse
I agree that you should have CID backup, but I really had no choice but to delete it, there was no other way to unbrick it. And if you were on ICS, you cannot downgrade to Gingerbread, you can only flash ICS or JB.
Sent from my XT910 using Tapatalk
If you on ICS you should also boot with Retail XT910 ICS system.img because your kernel will be still ICS XT910s..
Sent from my Atrix 2 using Tapatalk
turffe said:
Does anyone tried that method, to make backup your CID?
If your XT910S/K soft bricked why not to try by flashing XT910 2.3.6 system.img? It should boot to Retail XT910 2.3.6 with XT910S/K kernel.
If you get boot you can try rooting it & backup CID with Terminal Emulator. When erase it...
Still... with ics(jb) you'll need be with erased CID, but having backup never hurts... I just wanna to help people save unique CID.
Click to expand...
Click to collapse
As for me, I don't think that CID would be worth saving, since this device was bought in South Korea, then shipped to Australia and from there shipped to me here in Serbia So, since I couldn't rely much on customer support or service, I decided to delete CID in order to unbrick the Razr. Of course, if there's a chance to save your CID you should certainly do it but for me, CID doesn't mean much in these circumstances.
Sent from my XT910K Revived
thanks @JovieBrett
but what special this guide do compare to http://forum.xda-developers.com/showthread.php?p=43806194&nocache=1
we still need to install BMM/SS to pas that customer id screen..otherwise it will give black screen after that CID screen
I took the phone to ap fastboot
flash the .bat file you told about (echo off etc)
flashed firmware with rsdlite
it gave cid error. then android logo with loading (i think thats what you said android is updating)
then I ran with bp tools and it reached OS
if I restart it give black screen after CID unless boot with bp tools
faheemakbar18 said:
thanks @JovieBrett
but what special this guide do compare to http://forum.xda-developers.com/showthread.php?p=43806194&nocache=1
we still need to install BMM/SS to pas that customer id screen..otherwise it will give black screen after that CID screen
I took the phone to ap fastboot
flash the .bat file you told about (echo off etc)
flashed firmware with rsdlite
it gave cid error. then android logo with loading (i think thats what you said android is updating)
then I ran with bp tools and it reached OS
if I restart it give black screen after CID unless boot with bp tools
Click to expand...
Click to collapse
Yep unfortunately that's the problem right now. It can only boot with 'bp tools' option. The only thing you can normally boot it is to install a BMM or SS recovery so that it can bypass through booting the CID error without encountering the black screen. As of now, I don't have the required stuff to fix it and don't have the knowledge to find what's behind that problem. The device (Motorola Razr) is not mine, I just fixed it for my friend. I think we can only live with the recovery installed because without it, it's impossible to boot the device normally without CID.
Take note, booting with BP tools is like booting in safe mode, it does not save any progress you made after you customize some stuff on the main screen itself.
I clear your doubt.. It does save i tried with several power offs and restarts
Sent from my XT910 using Tapatalk
faheemakbar18 said:
I clear your doubt.. It does save i tried with several power offs and restarts
Sent from my XT910 using Tapatalk
Click to expand...
Click to collapse
That's a good result though sorry I'm just a user and not a developer that knows all stuff