Hi,
can someone help me plz...?!
I have strange dots, in line, on my Nokia lumia 800 screen ...
All colors are fine when i run diagnostic tool on my phone, but in all other applications, dots appear and disappear...
Thx
try a reset. could be software related, back up and reset
stealthj said:
try a reset. could be software related, back up and reset
Click to expand...
Click to collapse
the phone was on 7.5 version and i upgraded it to the 7.8 but nothing's happend...
No One nothing?
Related
ok. so i flashed my fuze to energy rom 1.5 final yesterday and it was working fine and dandy. so today i was doing the usual on the phone, msn messenger, internet, etc. i was experiencing some slow down, so i figured i would soft reset the phone to get it up and running again . once i did the reset, however, it it just got stuck at the white world att screen. it doesn't run anymore. its on the white ATT world phone page, and is stuck there. somebody help. what should i do? i tried connecting to mobile device center but it's not detecting the connection to the phone.
toupac said:
ok. so i flashed my fuze to energy rom 1.5 final yesterday and it was working fine and dandy. so today i was doing the usual on the phone, msn messenger, internet, etc. i was experiencing some slow down, so i figured i would soft reset the phone to get it up and running again . once i did the reset, however, it it just got stuck at the white world att screen. it doesn't run anymore. its on the white ATT world phone page, and is stuck there. somebody help. what should i do? i tried connecting to mobile device center but it's not detecting the connection to the phone.
Click to expand...
Click to collapse
Did you try to put the phone in bootloader mode ? Maybe could give it a try (reset and vol down) and try flashing a new rom.
Had a similar problem and freaked cuz thought I had a 3 day old Bricked Fuze. Should be no worries. Just hold down the Down volume button and also the Center button while sticking the stylus in the reset button. Should come up with the tri color screen. Do what it says to restore. Just to let you know anything that you had saved on the phone would be forever lost. IMO a very small sacrifice to get my phone back.
toupac said:
ok. so i flashed my fuze to energy rom 1.5 final yesterday and it was working fine and dandy. so today i was doing the usual on the phone, msn messenger, internet, etc. i was experiencing some slow down, so i figured i would soft reset the phone to get it up and running again . once i did the reset, however, it it just got stuck at the white world att screen. it doesn't run anymore. its on the white ATT world phone page, and is stuck there. somebody help. what should i do? i tried connecting to mobile device center but it's not detecting the connection to the phone.
Click to expand...
Click to collapse
I guess you should have posted this on the ROMs thread, in case it's a ROM bug, but if the suggestions above don't work for you, you might have a bad flash. Try reflashing and make sure you hard reset again right at the "tap the screen to setup device" screen. And just to try to make it as safe as possible, try removing the SD card, you never know.......
Anyone know how to solve this problem?? The phone won't go into standby mode. it just stays at the lock screen
Video on my problem
http://www.youtube.com/watch?v=ej_TzilZITk
Anyone can help please??
no one can help me??
Looks like you are using the CHT lock screen, know issue, buggy, a search would have found it ....
watcher64 said:
Looks like you are using the CHT lock screen, know issue, buggy, a search would have found it ....
Click to expand...
Click to collapse
I made a hard reset, the problem still exist...
shadowblade1990 said:
I made a hard reset, the problem still exist...
Click to expand...
Click to collapse
Well that lock screen in the video is not the stock lock screen, what mod are you using on it ....
Whatever mod you are using, could be the problem ....
shadowblade1990 said:
I made a hard reset, the problem still exist...
Click to expand...
Click to collapse
Are you using CHT lockscreen? Just use the standard one and it should be alright.
nicedude_abad said:
Are you using CHT lockscreen? Just use the standard one and it should be alright.
Click to expand...
Click to collapse
Ditto ...
Not sure how many times this needs to be said ...
But going to join you in saying it again ...
Like i said, i done a hard reset and the problem still exist, which means that the problem does not lies on CHT.
btw i am not using CHT, this video that i posted is just for reference of my problem. (which the phone does not go into standby mode and need activesync in order for it to enter standby mode) the lockscreen that i am using is the orginal HD2 lockscreen.
Same Problem
I'm having the exact same problem with my hd2. I've tried the following things to resolve it:
- Soft reset
- Hard reset
- Task 29 reset
- Formatting my sd card
- Using Artemis and Chuckyrom, both same problems
I'm going to try a stock rom now and look if that works.
Are there more people having this problem? any solutions? Tx!
EDIT: I've installed the stock rom and replaced HSPL with SPL. I'm still having the same problem. I'm going to send it to the manufacturer. Good Luck!
Would you be so kind to come back with the result ? This is a very confusing problem. There are lots of people suffering from this already !
solved
i two have had this problem and have just found out how to sort it out. basically i tried everything new radio, rom, getting rid of CHT
and in the end all it was is the usb connection!!!!
all you have to do when unplugging your usb cable is make it come out on a angle left to right. there are obviously some very delicate contacts that get knocked out of kilter making the phone think its still on mains power when its not hence never turning off
you can confirm this error by unplugging your phone going into backlight settings and seeing if you can adjust you light setting on battery power if when you adjust your light setting nothing happens you got the same prob as me
Having recently up-dated my Lumia 800 to the latest "Tango" version (officially via Zune, no custom ROM used), I have found that the following sensors are no longer available to me: Accelerometer, Magnetometer and Proximity. When I run Nokia Diagnostics, it tells me these sensors are not available on my phone .
So, I thought that I would roll-back to the previous "Mango" version and either stay with it or then re-install "Tango". Lumia and PC connected, check. Zune running, check. Zune and phone chatting to each other, check. All good to go. Start the roll-back and........ nothing. On the screen of my phone is the graphic showing that I need to connect PC to phone, which remains in that state for about 10 mins. And when it changes to "Do not disconnect" status, Zune then chimes in and says the roll-back failed and gives me the code 801812E0.
As a last resort, I also did a factory reset. Bye bye all my data (thank God for Re-installer and SkyDrive!!). As you can guess, the sensors are still non-functional. Damn it!
OS version: 7.10.8773.98
Firmware : 1750.0805.8773.12220
Bootloader: 7.41.0.0
Has anyone else had this happen or am I on my own? I've searched several forums but so far seem to be the only one that has had this happen. Just for info, all apps are loaded ONLY from the MarketPlace and all up-dates in firmware are the official versions loaded via Zune. Not unlocked or any Homebrew apps, just bog-standard out-of-the-box Nokia Lumia 800.
Any ideas and thoughts on the matter greatly appreciated :good:
[email protected] said:
Having recently up-dated my Lumia 800 to the latest "Tango" version (officially via Zune, no custom ROM used), I have found that the following sensors are no longer available to me: Accelerometer, Magnetometer and Proximity. When I run Nokia Diagnostics, it tells me these sensors are not available on my phone .
So, I thought that I would roll-back to the previous "Mango" version and either stay with it or then re-install "Tango". Lumia and PC connected, check. Zune running, check. Zune and phone chatting to each other, check. All good to go. Start the roll-back and........ nothing. On the screen of my phone is the graphic showing that I need to connect PC to phone, which remains in that state for about 10 mins. And when it changes to "Do not disconnect" status, Zune then chimes in and says the roll-back failed and gives me the code 801812E0.
As a last resort, I also did a factory reset. Bye bye all my data (thank God for Re-installer and SkyDrive!!). As you can guess, the sensors are still non-functional. Damn it!
OS version: 7.10.8773.98
Firmware : 1750.0805.8773.12220
Bootloader: 7.41.0.0
Has anyone else had this happen or am I on my own? I've searched several forums but so far seem to be the only one that has had this happen. Just for info, all apps are loaded ONLY from the MarketPlace and all up-dates in firmware are the official versions loaded via Zune. Not unlocked or any Homebrew apps, just bog-standard out-of-the-box Nokia Lumia 800.
Any ideas and thoughts on the matter greatly appreciated :good:
Click to expand...
Click to collapse
Are the sensors present in different apps? For instance, does the compass work in mapping apps, does Photosynth work? Easiest thing would be to visit a nearby Nokia Care Point and ask for a reflash of the firmware.
@ChrisKringel.... Sadly the sensors are totally missing (can't view photos or internet, etc in landscape), the screen remains active when I make phone calls and the compass is missing too, which I first noticed in the update of Nokia City Lens. When I use the Nokia Diagnostics, it says that none of these sensors are present.
Anyway, had a mail from Nokia Support suggesting that I take the steps I had ALREADY told them I had taken. So went to my local Nokia dealer and asked them to make my toy better. Long and the short of it, it has to be sent back to Nokia and will probably be replaced. So for the next 10 days or so I am Lumia-less. Back to my HTC HD2 (which you just can't kill, even after diverse WM, WP7 and Android ROMs). But I so much more prefere WP7 on a native device and the Lumia is a great phone!!
Hello, i am using Samsung galaxy S3 international version yesterday my friend told me that the jelly bean update is released, so i tried updating it
and it worked fine
the model version says now 4.1.1
I am using every thing default in the phone did not change the launcher or the lock screen i had this phone for 2 weeks now
Here is my problem! every thing worked fine but when i went to my lock screen i noticed the left side of it really bright, when i go back to my home page the brightness goes away, I am using the same WP for both so it was very easy to catch on
I made then both WPs black to really see it, and it was very very obvious on the lock screen, the white was really showing, but in the homepage it is normal, you can even see it with a print screen, how weird is that? i have taken two photos one from the lock and one from the home,
Even tho the lock one is hard to see but trust me its x10 worse than that when you see it in the eye
This is the Lock screen
http: //i.imgur .com/ScyNq.png
This is the home screen
http: //i.imgur .com/BgaWy.png
it is the same WP on both
does any one have a clue what might be going on :S?
if you need any more info please tell me i will give what ever info you need
Did you try reset to factory defaults?
yes, same thing
any one knooooooooooooow??????????????????????????????????????????????
Ok, I would do the following if it is possible at all with your device:
1) flash back your old firmware
2) do reset to factory defaults again
3) check if the problem is still here
If the problem persists - something is wrong with your device. Next step is locating nearest service office.
If not - it is software problem, file a bug to Samsung and wait until they fix it.
Not really optimistic, but I don't have anything better
how can i flash back to old firmware?
Renegader said:
how can i flash back to old firmware?
Click to expand...
Click to collapse
Well, try this: http://forum.xda-developers.com/showthread.php?t=1838480
But it is just a guess, I never did it myself to Samsung devices, sorry.
I dont know. Sorry.
Recently I brought my lumia 800 to nokia care as speaker was having problem. They wipe all my data (claimed that they will update my software even after I said it had latest update). Since than it's having problem accessing Marketplace/Zune Music/Xbox Live in random times. Every other app work fine, just can't access those 3 apps unless I restart the phone. Any idea how to fix that?
aynshtayn said:
Recently I brought my lumia 800 to nokia care as speaker was having problem. They wipe all my data (claimed that they will update my software even after I said it had latest update). Since than it's having problem accessing Marketplace/Zune Music/Xbox Live in random times. Every other app work fine, just can't access those 3 apps unless I restart the phone. Any idea how to fix that?
Click to expand...
Click to collapse
show it to nokia centre again to flash it or just hard reset phone