Hy guys i will Tell you about Gta 3 No Lag at Galaxy y
You need
Gta 3 apk
Gta 3 data
Cm7 lib by yuzeps
Ram expander
Download all requirements
first Flash Cm7 Lib
Install Gta 3
Put data at Sdcard/android/data
Setting Cf3d Reduce quality reduce texture size and qualcomm plugin
run gta 3 and gta 3 is working but lag
If you want Lag free Activate Swapit Ram expander Just tick swap activ
Overcloking may help Reducing lag
Nb:your sd card must 4GB if you Not have It Use Savie kernel Then try It
Waste thread for me
NOTHING TO SEE HERE
thooriq555 said:
Hy guys i will Tell you about Gta 3 No Lag at Galaxy y
You need
Gta 3 apk
Gta 3 data
Cm7 lib by yuzeps
Ram expander
Download all requirements
first Flash Cm7 Lib
Install Gta 3
Put data at Sdcard/android/data
Setting Cf3d Reduce quality reduce texture size and qualcomm plugin
run gta 3 and gta 3 is working but lag
If you want Lag free Activate Swapit Ram expander Just tick swap activ
Overcloking may help Reducing lag
Nb:your sd card must 4GB if you Not have It Use Savie kernel Then try It
Click to expand...
Click to collapse
Lolz there is another thread like this: http://forum.xda-developers.com/showthread.php?t=2157965
Rom: Hyperion 8
Kernel: Savie's kernel
Theme: My own modification
Thats y i said it was waste
NOTHING TO SEE HERE
thooriq555 said:
Hy guys i will Tell you about Gta 3 No Lag at Galaxy y
You need
Gta 3 apk
Gta 3 data
Cm7 lib by yuzeps
Ram expander
Download all requirements
first Flash Cm7 Lib
Install Gta 3
Put data at Sdcard/android/data
Setting Cf3d Reduce quality reduce texture size and qualcomm plugin
run gta 3 and gta 3 is working but lag
If you want Lag free Activate Swapit Ram expander Just tick swap activ
Overcloking may help Reducing lag
Nb:your sd card must 4GB if you Not have It Use Savie kernel Then try It
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ubuntu themed apps and other stuff here
--->make phone faster and battery efficient
--->partition and link2sd for NOOBS?!?!?
--->3d games for galaxy y (no root no lag)
Are you sure expanding the ram a bit will help reduce some lag? Also you could have posted the ram tip at Imranabbas22's thread.
Just report it :sly:
-.-
Please report it
NOTHING TO SEE HERE
Thread Closed:
Please refer to this one - http://forum.xda-developers.com/showthread.php?t=2157965
Related
If you have NVIDIA Tegra powered Android device, you can easily find games that are optimized to exploit the full potential of the Tegra mobile processor. You can download and play lot of NVIDIA nice 3D graphics games such as SAMURAI II: VENGEANCE.
Yes, there have a lot of NVIDIA games which are specifically for Tegra devices and i think that many Android users face the problem that want to play these games but they don’t have the proper hardware. But don’t worry about it, now Tegra Specific Games can be played on Non-Tegra Devices using Chainfire 3D driver. For your info, Chainfire3D is an intermediary OpenGL driver which can link or communicate between your apps and the graphics drivers, and can intercept and change commands between the two. It has some built-in functions, and can be further extended with plugins to provide extra functionality. Chainfire3D is free apps and only support 1ghz or more and rooted Android devices only. Overall. With OpenGL video driver Chainfire 3D, a few nifty plug-ins, and bit of crafty tinkering you can now play Tegra specific games on non-Tegra devices.
Here is instruction on how to setup Chainfire3D and play NVIDIA Tegra on Non Tegra Android Phones. Before start, you must make sure that your phones has gain root access. Otherwise, you can use Z4root, universal Androot, Superoneclick or other root tools to root your Android Phone.
Step 1: Download Chainfire3D and setup on Android phones.
Step 2: Launch and click on CF3D driver and then click on Install. Your Android phone will reboot once installation complete.
Step 3: Now Download and unzip CF3D driver Plug-ins zip file (Link). These file have libGLEMU_NVIDIA, libGLEMU_POWERVR and libGLEMU_QUALCOMM. So now , we want to play NVIDIA Games, so just copy libGLEMU_NVIDIA and place on your Android phones SD Card.
Step 4: Launch CF3D driver again and click on the “Install Plugin” , then click on the libGLEMU_NVIDIA.
Step 5: Click on use plugin and then select plugin.
Step 6: Thats all and now you can play NVIDIA Tegra games on your Android Phones. ( I have try on nexus one with SAMURAI II: VENGEANCE games, it run smooth! )
According to the developer , there may have some risk involved, so you should have either root access in recovery, a CWM backup, or a firmware to flash handy. Nevertheless, the driver has been tested and found working on the following devices:
- HTC HD2
- Samsung Galaxy S
- Samsung Galaxy Tab 7″
- Samsung Galaxy S II
- Samsung Epic 4G
- Motorola Atrix 4G
- Motorola Droid 2
- LG Optimus 2X
- Google Nexus S
AND also in MOTOROLA DEFY TESTED IN MY DEVICE AND WORKED PERFECTLY
MARKET LINK : ANDROID MARKET->TOOLS[root] Chainfire3D
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CONTD
Sorry guys as am a new user of xda so i cant able to upload any url fo the chainfire you can search the chain fire 3d [root] in android market....
Is the improvement very noticable? It sounds interesting!
Sent from my MB525 using XDA App
if you do as per my instructions .. you will get working in defy also (screen shot also provided for better understanding)
if you like the post hit thanks
but does it affect other game`s ?
will they work faster and how the battery life
so far battery life and other games and all working fine in my defy (its just a port to install the nvdia games in defy nothing apart )
*sorry for late replies as am busy with ma studies
Download link n clear instructions
For more info about this application and download link follow the link which i provided .. if you find any problem installing in defy jjust pm me
http://forum.xda-developers.com/showthread.php?t=1087427
I migrate my s2 all about 740 apps into the new galaxy s3,and then I reboot s3 to go into the apps folder using brief mode to view all the apps like the second picture as follows,and I find slip down or up lag vey much,I find when installed about 200 apps will cause this issue,and I go to the settings->sound->auto haptic will be forced closed,the same go to the settings->application manager will be forced closed too,or maybe into the downloaded apps list and slip down or up lag vey much also,go to the settings-> language and input will dely about 3 seconds to get in,and I compare the s2 and s3 with the same 740 apps installed to boot to the desktop speed,s2 is faster than s3 very much,and compare the cwm backup time to backup into internal /mnt/sdcard folder is the same,finally compare to create /data folder into tar with gzip using root explorer ,the create speed of s2 is faster than s3 also,I have try to flash any kernel & ROM to solve the issues on board is useless till now,below is the titanium backup 700 apps download url,anyone interested can download using titanium backup to restore hundred apps to test it....
s2 rooted SiyahKernel v2.6.14 cwm 5.5.0.4/ stock firmware -> gb 2.3.3 zskf4
s3 rooted SiyahKernel s3 v1.0 cwm 5.5.0.4/ stock firmware -> zsaled
both s2 & s3 I use link2sd autolink to app2sd because huge apps installed,but s2 is running smoothly but s3 not,and if cwm backup data.ext4.tar file size great than 2GB will cause restore error...
installed about 740 apps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
apps folder using brief mode to slip down or up lag vey much
go to the settings->sound->auto haptic will be forced closed
go to the settings->application manager will be forced closed also
Titanium Backup 700 apps download to install test ==> http://www.badongo.com/file/27389879
https://docs.google.com/open?id=0B5C4uIQ2h8hkR2hhVTlPd0tlMGM
Just 1 question .. How do you use 740 apps
pigglett said:
Just 1 question .. How do you use 740 apps
Click to expand...
Click to collapse
Actually I often used only 10 apps,about 740 apps,The main reason is I have the collection hobby,the second reson is the smart phone is very Expensive need to the best use of,the third is the google play store is full of tens of thousands of apps,I don't want to waste time to look for the good apps when I need to use,so when others say what apps is good to use then I will download it to install,I create 16 folders on destop to classify each apps belong in order to find to use quickly like the picture as follows,and I will use the autostarts apps to do the startup manager jobs to control apps do not take up too much memory, as time goes by I got used to,everything is going fine when I use galaxy S2,everything is smooth,faster,quickly,until I migrate my S2 to S3 the nightmare as I described first is coming...which master can fix these issues...plz...
actually, you can delete those apps you dont really need thru root explorer (or counterpart) but be careful to do it. Below is the attached guide for the apps' use & functions.
https://spreadsheets.google.com/spr...1gdDJRekl4QmkyNmIzUmRvX2h3UDVkQXc&output=html
kicker1925 said:
actually, you can delete those apps you dont really need thru root explorer (or counterpart) but be careful to do it. Below is the attached guide for the apps' use & functions.
Click to expand...
Click to collapse
I'll try it....Thanks for your information......but I think this is the bug of settings.apk /odex ,and touchwiz UI,as to the cwm backup Performance is poor,may be the problem of cross partition read & write becoz S3 use the new technology to merge the capacity of /data & /mnt/sdcard...
back to report,I solve two problems,one is the cwm 5.5.0.4 v 1.5 backup time performance is not good,I use the official touch version cwm 5.8.4.3 the backup performance improved Several times than cwm 5.5.0.4,and another is apps folder using brief mode to slip down or up lag vey much,I downgrade the touchwiz UI to the modded TouchWiz 4 for ICS then all the smoothly...
The remaining are two forced closed problems,I think that is settings.apk /odex need to tuning...maybe others release soon ...
http://forum.xda-developers.com/showthread.php?t=1719744
http://forum.xda-developers.com/showthread.php?t=1520436
Ok, I Just got my MK808 mini pc and I found a huge problem because I was planning to replace my tv box for at least 10 months and if I dont solve te problem it ill not las that longer...
The chip is a RK3066 (many tabs have the same chip)
It was sold as a 1.6ghz dual core... and the problem is not that it doenst go any further than 1ghz, it just doent scales down.... (stays on 1ghz indenpendent of what you are doing, and thats to much... i gets hot and without any need....)
I used this app and 2 others to confirm this...
And if I go to CPU I see the time it spent on each clock speed... and it is always on 1000mhz... (100percent) BUT the app also shows that it has the 1600mhz available... so it seems to me that the cpu is set to 1ghz/1ghz or 1ghz max with the performance kernel.... (why the f would the manufacturer do this??)
So I tried the finless ROMs 1.4, 1.5 and 1.5A and 3 different kernels on the 1.5 and I get the same result
If I change the max or min speed on a cpu app (tried NO FRILLS and rom toolbox PRO) nothing happens, it still showing 1000mhz (1008 i think)
Tried to set another governor and still the same...
set on boot and reboot but still the same...
any solution ??
thanks
And what about NAND's 8GB advertised¿?
This is my df output : 4.8GB avaiables to user data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone having same results?
Antieco said:
And what about NAND's 8GB advertised¿?
This is my df output : 4.8GB avaiables to user data.
Anyone having same results?
Click to expand...
Click to collapse
Maybe thats because of the os? On android I have 6gb free I think... 4gb on one separeted memory and 2 on the other, maybe is that... is not only one partition...
360porcento said:
Maybe thats because of the os? On android I have 6gb free I think... 4gb on one separeted memory and 2 on the other, maybe is that... is not only one partition...
Click to expand...
Click to collapse
What's your kernel version?
Antieco said:
What's your kernel version?
Click to expand...
Click to collapse
I'll check it when I get home
Sent from my R800i on 4.1.1
360porcento said:
I'll check it when I get home
Sent from my R800i on 4.1.1
Click to expand...
Click to collapse
sorry for the relay, but i cant check it right now, is the one that comes with the finless 1.5a , just google it
here http://www.freaktab.com/showthread.php?1971-NEW-MK808-Android-mini-TV-Player-Finless-1-5A-Custom-ROM
It's normal only show 4.8G available for end user
Antieco said:
And what about NAND's 8GB advertised¿?
This is my df output : 4.8GB avaiables to user data.
Anyone having same results?
Click to expand...
Click to collapse
The Android OS, pre-load apps occupied same storage, and the system need to seperate some memories as ROM ( for install apps and stock app data,), and the GPU default occupied about 40M-50M as cache. so it's only show about 4.8GB
Flash Firmware
I think Flash new firmware can resolve the problems.
I am facing a very strange ram usage in the forground apps when I have reflashed the stock ics it was like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And the phone was flaying with smoothness and responsetivity , but after about 3 weeks of use it is getting slow and then i chevked the ram usage and i found it like this
Can any one tell me the problem to find the solution ??
Stock 4.0.4 .587 rooted
No heavy apps installed , no strange one and no scripts either
Serajr systemui v7.1 as mod
Xperia mini pro , with 32 go micro sd class 4 : 8.8 gb stored in it , so what is causing the problem , thanks
Sent from my SK17i using xda app-developers app
job.bousix said:
I am facing a very strange ram usage in the forground apps when I have reflashed the stock ics it was like this
View attachment 2109206
And the phone was flaying with smoothness and responsetivity , but after about 3 weeks of use it is getting slow and then i chevked the ram usage and i found it like this
View attachment 2109208
Can any one tell me the problem to find the solution ??
Stock 4.0.4 .587 rooted
No heavy apps installed , no strange one and no scripts either
Serajr systemui v7.1 as mod
Xperia mini pro , with 32 go micro sd class 4 : 8.8 gb stored in it , so what is causing the problem , thanks
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
I would try two things, one is to clear the cache and the other is reoptimize the SQLite database. If the lagging starts after a few days it is probably the cache, but if it takes longer than this it is probably the SQLite database. The easiest way to fix these things is with init.d scripts so that they happen on every reboot. There are also a bunch of scripts or apps that you can also install that will also do these for you. Something like the V6 supercharger of Pimp-my-ROM will probably let you do both.
justmpm said:
I would try two things, one is to clear the cache and the other is reoptimize the SQLite database. If the lagging starts after a few days it is probably the cache, but if it takes longer than this it is probably the SQLite database. The easiest way to fix these things is with init.d scripts so that they happen on every reboot. There are also a bunch of scripts or apps that you can also install that will also do these for you. Something like the V6 supercharger of Pimp-my-ROM will probably let you do both.
Click to expand...
Click to collapse
Thanks for replay , i was thinking that it's an app that is goning to be launched but but it probably doesn't so i tested the apps one by one an then i figured out that it was because of android.process.acore related to contacts , when launched in background it reduces ram in foreground and if killed it increases ram usage in foreground so no solution its amount of ram usage is always used if in background or foreground :/
Sent from my SK17i using xda app-developers app
justmpm said:
I would try two things, one is to clear the cache and the other is reoptimize the SQLite database. If the lagging starts after a few days it is probably the cache, but if it takes longer than this it is probably the SQLite database. The easiest way to fix these things is with init.d scripts so that they happen on every reboot. There are also a bunch of scripts or apps that you can also install that will also do these for you. Something like the V6 supercharger of Pimp-my-ROM will probably let you do both.
Click to expand...
Click to collapse
Yes , one more question , i searched for reoptimizing sqlite database but no results : so how to optimize sqlite ??
Sent from my SK17i using xda app-developers app
job.bousix said:
Yes , one more question , i searched for reoptimizing sqlite database but no results : so how to optimize sqlite ??
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
There are lots of ways to optimize the SQlite database. It is often installed as an init.d script as part of a tweak/mod package. For example both the V6 supercharger and the Thunderbolt packages can be used to install a SQlite cleaner. I think there are also stand alone apps that will do it for you for ex: http://forum.xda-developers.com/showthread.php?t=1268522 I also think that something like sd maid from the play store also has the option for cleaning up the SQlite database. Look for SQlite vacuuming or SQlite defragging and a lot of things should pop up .
Hello !
First thing : sorry for my low level in english , I'm doing my best ...
It's my first post , sorry if i'm making some mistakes
Let's go :
Picture to make evrything clear :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bootlocker: I don't know but this devise is totaly stock
=>Problem : my phone is runing slow
What i had do befor: nothing , just using it to play a game (drag racing), to contact my friends, to wake up the morning ...
=>What i had try to solve the problem : clearing the cache, restaring, unistalling some apps that have some backround tasks ( facebook messenger, Kakaotalk ...), using some apps like clean master, also removing the SD (8gb) ... But the same problem , once i open something it becomes laggy
=>What I need : I'm really a "I-Don'T-Know-Anything", so if someone has any idea please
Thanks for reading
-MO-
Sent from my GT-S6102 using xda app-developers app
SDR_Muslim_Mo said:
Hello !
First thing : sorry for my low level in english , I'm doing my best ...
It's my first post , sorry if i'm making some mistakes
Let's go :
Picture to make evrything clear :
View attachment 2696980
Bootlocker: I don't know but this devise is totaly stock
=>Problem : my phone is runing slow
What i had do befor: nothing , just using it to play a game (drag racing), to contact my friends, to wake up the morning ...
=>What i had try to solve the problem : clearing the cache, restaring, unistalling some apps that have some backround tasks ( facebook messenger, Kakaotalk ...), using some apps like clean master, also removing the SD (8gb) ... But the same problem , once i open something it becomes laggy
=>What I need : I'm really a "I-Don'T-Know-Anything", so if someone has any idea please
Thanks for reading
-MO-
Sent from my GT-S6102 using xda app-developers app
Click to expand...
Click to collapse
Honestly, what you need, if you like to play games, is another phone. This obviously depends on what type of games you are trying to run, but between the single core processor, a weaker GPU, and very small amount of RAM as well as being on Gingerbread, there just won't be much to do.
Your best bet, to help a little, will be to either install a custom kernel and / or a custom rom that will have some performance optimizations. You might want to head over to the forum for your phone and read up on how others are enjoying the mods to see if they would work for you.
http://forum.xda-developers.com/galaxy-y/duos-development
Honestly, what you need, if you like to play games, is another phone. This obviously depends on what type of games you are trying to run, but between the single core processor, a weaker GPU, and very small amount of RAM as well as being on Gingerbread, there just won't be much to do.
Your best bet, to help a little, will be to either install a custom kernel and / or a custom rom that will have some performance optimizations. You might want to head over to the forum for your phone and read up on how others are enjoying the mods to see if they would work for you.
http://forum.xda-developers.com/galaxy-y/duos-development
Click to expand...
Click to collapse
Hello !
Can you give me some advises about choosing a Kernel or a ROM ?
Thank you
Sent from my GT-S6102 using xda app-developers app