Good news, our Razr (xt912) is now officially supported by AOKP and they released Build 4, which is 4.2.2. However i do not know how to flash this rom so any help would be nice.
Here is a link to it: http://aokp.co/release-jb-mr1-build-4/
Thanks
I think..
( I think ) you must on JB Kernel and Flash bootmenu manager. İts just RAZR XT910. I did not try XT912..
MertDogan said:
( I think ) you must on JB Kernel and Flash bootmenu manager. İts just RAZR XT910. I did not try XT912..
Click to expand...
Click to collapse
I just went from a rooted stock ICS, installed Safestrap 2 (couldn't get 3 to work) and installed AOKP and GApps and it's up and running just fine.
You can be in both, JB leak and ICS kernel, you just have to choose the right rom...
Also, you must not flash it on stock slot...
EDIT: Never mind.
Olao99 said:
You can be in both, JB leak and ICS kernel, you just have to choose the right rom...
Also, you must not flash it on stock slot...
Click to expand...
Click to collapse
Really ? Im on JB leak i downloaded AOKP for CDMA Spyder and i can´t boot..... I think it is only for ICS kernel...
The official AOKP releases are for ICS kernel only. There are builds by dhacker which work on the JB kernel (XT912 only).
I installed bootmenu manager, 3 wipes and flash umts_spyder_jb.zip and reboot but not opened. And then Im back to the Stock İCS.
shobon said:
The official AOKP releases are for ICS kernel only. There are builds by dhacker which work on the JB kernel (XT912 only).
Click to expand...
Click to collapse
Can we gt links to these? Also, are they tested or just "it should work" types of things.
---------- Post added at 10:38 AM ---------- Previous post was at 10:29 AM ----------
Also, this page may answer those OP's question.
Could someone in the thread read and evaluate to make sure?
http://www.vickyz.com/install-motor...-android-4-2-2-jelly-bean-build-4-firmware/2/
http://goo.im/devs/Hashcode/spyder/aokp
i tested this build JELLYBEAN_KERNEL_ONLY-alpha-JB-aokp_spyder_unofficial_Feb-07-13.zip
Its pretty fast and nice but it have same bugs as CM 10.1(no camera...)
The camera should be fixed once Verizon pushes the official update and the devs have time to compile the drivers.
They stated soak test signups yesterday(?), so it shouldn't be to long.
Any other major bugs, or is it pretty clean? Also, did you follow the same instructions as the link I posted?
on BMM
how install this rom on system_2 of Boot menu manager ?
wont boot on System 2 of Boot menu manager ...
another AOKP rom boot on system_2 but this rom wont
how is battery performance in this rom compared to china leak jb?
Related
Hi evreyone
in'm an italian user and I install on my XT910 the JB Kernel from Verizon with Boot Menù Manager.
I see in the forum that's there're a lot of Rom that using Safestrap 3 so I ask you if it's possible to install this Rom with BMM or if thre's a procedure to convert rom for SS3 into rom for BMM 0.3.4.
Best regards
p.s.: I know my english is not so good, I hope that you understand my problem.
AW: [Q] Custom Rom from Safestrap to Boot Menù Manager
All Stock JB based Roms out there are booting fine with BMM 0.3.4 so long you're running the JB Kernel. Just flash the GSM Patch after the Rom.
In my signature is an Link with an overview about bootable JB (&ICS) Roms.
Sent from my XT910
HSD-Pilot said:
All Stock JB based Roms out there are booting fine with BMM 0.3.4 so long you're running the JB Kernel. Just flash the GSM Patch after the Rom.
In my signature is an Link with an overview about bootable JB (&ICS) Roms.
Sent from my XT910
Click to expand...
Click to collapse
I'll try to use information read on you link with hashcode CM10.1.
Thanks
AW: [Q] Custom Rom from Safestrap to Boot Menù Manager
The latest CM10.1 Roms are not bootable with BMM. Hashcode changed some stuff, so you have to use SS for CM10.1.
That's why i wrote Stock (Blur) based JB Roms like Eclipse, Cyclone, Batakang, DWiz,....
Sent from my XT910
HSD-Pilot said:
The latest CM10.1 Roms are not bootable with BMM. Hashcode changed some stuff, so you have to use SS for CM10.1.
That's why i wrote Stock (Blur) based JB Roms like Eclipse, Cyclone, Batakang, DWiz,....
Sent from my XT910
Click to expand...
Click to collapse
This is why I can't install CM10.1
It's the same thing with Liquid-JB?
I'd like to have the version 4.2.1 on my Razr becasuse I try the CM10.1 for ICS kernel and I think it's a good Rom but the I need to use Camera and BT.
Do you Know if there're a custom rom with android 4.2.1 for ours smartphone?
Thanks
Best regards
No longer available
Re: [ROM][GSM][XT910][BMM 0.3.4] WDSEA0588 v1.75en JB 4.1.2
I am already in china jb rom xt910. Can i flash this on second system?
Sent from my XT910 using Tapatalk 2
knives809 said:
I am already in china jb rom xt910. Can i flash this on second system?
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
You need run with Verizon JB Kernel only.
thanks,can you please also post some screenshot.
will try this ROM soon.
Please provide screenshots, and a fairly detailed change log + bug list
rampee said:
Please provide screenshots, and a fairly detailed change log + bug list
Click to expand...
Click to collapse
I have add screenshots, sometimes they not shown, don't know why. For the bugs, there no bugs, should everything works.
artur0588 i have your ics rom on system 1 and is great, gonna flash this in a few minutes on system 2, i bet it's also be great
thanks for your work
@artur0588
In first post you wrote:
YOU MUST RUN JB KERNEL FROM LEAKED VERIZON ANDROID
and also:
You must run android ICS 4.0.4
so there are 2 information which results in following understanding:
1.You must install jb verizon kernel and
2.You must have ICS baseband?
is this equal to what you are saying?
xtam said:
@artur0588
In first post you wrote:
YOU MUST RUN JB KERNEL FROM LEAKED VERIZON ANDROID
and also:
You must run android ICS 4.0.4
so there are 2 information which results in following understanding:
1.You must install jb verizon kernel and
2.You must have ICS baseband?
is this equal to what you are saying?
Click to expand...
Click to collapse
he was referring to whom is on ics to erase cid, install jb kernel and then flash, if you are already in jb kernel you don't need those steps.. why you are that mean coz you know what he was talking about
Sisqo said:
he was referring to whom is on ics to erase cid, install jb kernel and then flash, if you are already in jb kernel you don't need those steps.. why you are that mean coz you know what he was talking about
Click to expand...
Click to collapse
I am not mean... i never intended to be...
Rom is always based on kernel and baseband... he menttioned being on stock ics = having ics baseband and havink ics kerenl.
Now he included in his instruction step to flash jb kernel so the state of the rom would be, after flashing jb verizon kernel - ICS baseband - because we did not changed baseband , ans verizon kernel - cause we had changed it.
SO i asked if this is equal to what he is saying - ics baseband and verizon kernel is required to this rom?
NEVER intended to be mean - just wanted to simplify that information...to understand better
just flashed it, jb verizon kernel with chinese baseband bp_U04.10.03P.img that i used also in other jb roms.
didn't had any apns in settings, added the one for my network and data works, will report any problems.. restoring my apps for now
AW: [ROM][GSM][XT910][BMM 0.3.4] WDSEA0588 v1.75en JB 4.1.2
C'mon guys, it the same as for any other JB Rom out there. This Rom is based on the Verizon Leak, so you have to flash the JB Kernel.
For BMM you need ICS, so >
Run ICS as Main System > install BMM0.3.4 > flash Verizon JB Kernel > flash Rom > Profit
Sent from my XT910
Have portuguese from Brazil?
Re: [ROM][GSM][XT910][BMM 0.3.4] WDSEA0588 v1.75en JB 4.1.2
At last a leak-based rom with no verizon crap i see some remaining files in framework folder though. Any rom changelog please? Thanks.
Enviat des del meu Motorola RazR Maxx
artur0588 said:
You need run with Verizon JB Kernel only.
Click to expand...
Click to collapse
can u post a link to the verizon jb leak for gsm xt910
---------- Post added at 09:04 PM ---------- Previous post was at 09:02 PM ----------
HSD-Pilot said:
C'mon guys, it the same as for any other JB Rom out there. This Rom is based on the Verizon Leak, so you have to flash the JB Kernel.
For BMM you need ICS, so >
Run ICS as Main System > install BMM0.3.4 > flash Verizon JB Kernel > flash Rom > Profit
Sent from my XT910
Click to expand...
Click to collapse
can u post a link to the verizon jb and do i hve to erase my cid if i am using ics as my main system? or
Irthu said:
can u post a link to the verizon jb leak for gsm xt910
---------- Post added at 09:04 PM ---------- Previous post was at 09:02 PM ----------
can u post a link to the verizon jb and do i hve to erase my cid if i am using ics as my main system? or
Click to expand...
Click to collapse
You can follow this tutorial in order to be able to install ROMs based in the JB leak. As you will see, you must erase your cid to use any of these ROMs (including wdsea0588).
In the tutorial, "jb ota" means any ROM based in JB kernel. And you don't need to flash GSM patch as wdsea0588 is already patched and ready for GSM use.
which languages are included?
Re: [ROM][GSM][XT910][BMM 0.3.4] WDSEA0588 v1.75en JB 4.1.2
Spanish, English, and a third called "pyccknn"
Enviat des del meu Motorola RazR Maxx
woonaval said:
Spanish, English, and a third called "pyccknn"
Enviat des del meu Motorola RazR Maxx
Click to expand...
Click to collapse
In fact 3rd one it's russian.
sweet Tonight I'll give it a try and see if I'll move from china JB to verizon kernel. I hope so
as seen from screenshots signal indicator is full (verizon kernel roms = 2-3 bar max, china kernel = full and I still don't know why)
anyway, congrats and thank you!
Just sharing the information I saw today in Google+:
Motorola Droid RAZR/RAZR MAXX (XT910) and Motorola Droid RAZR (XT912) are now officially supported by CyanogenMod Team.
As they said in this post, the developers who are porting this ROM to us joined the CM family.
You can see the Device page here:
CDMA
GSM
Hope we all could enjoy it's stable release soon!
wow I have been waiting for this, very awesome. I hope we can see stable builds soon :good::good::victory:
one thing I miss is BMM compability...
Based
Sorry, but i read all and dont see if this rom is ICS based or JB. Any know? I think is ICS
Lxledesma said:
Sorry, but i read all and dont see if this rom is ICS based or JB. Any know? I think is ICS
Click to expand...
Click to collapse
It's CM10.1, based on Android 4.2.2
fredamsouza said:
It's CM10.1, based on Android 4.2.2
Click to expand...
Click to collapse
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Lxledesma said:
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Click to expand...
Click to collapse
I'm pretty sure its the ics kernel still
Full-Throttle Team
Fuzion Team
Android Aggression team
Lxledesma said:
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Click to expand...
Click to collapse
Per the web site: "This is for XT912 with stock ICS KERNEL ONLY!"
Awesome... hope they solve the bluetooth issue soon.
We'll likely see it stick to ICS Kernel only until a bit after the official Jelly Bean OTA, at which point you'll start to see dhacker and Hash switch things over permanently. I still can't believe that a new Motorola device is supported, much less one as locked down as Verizon has the CDMA version haha. Kudos to both dhacker and Hash for their hard work on all this.
Lxledesma said:
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Click to expand...
Click to collapse
I have a ICS kernel and safestrap, I install this in slot 4 and works fine.
Enviado desde mi XT910 usando Tapatalk 2
Great news! I'm glad all their hard work has paid off
Running it now. Works fine although there's still no Bluetooth and no flash.
Sent from my XT910 using xda app-developers app
Nikorasu said:
Awesome... hope they solve the bluetooth issue soon.
Click to expand...
Click to collapse
The bluetooth has been my biggest pet peeve with 10.1. I really wish I could use 10.1 daily but it doesn't make sense for me without bluetooth functioning correctly.
R: CyanogenMod 10.1 becomes Officially Nightly
cschuck320 said:
The bluetooth has been my biggest pet peeve with 10.1. I really wish I could use 10.1 daily but it doesn't make sense for me without bluetooth functioning correctly.
Click to expand...
Click to collapse
+1
Sent from my XT910 using xda app-developers app
Lxledesma said:
I know jaja, but my question is: for install CM0.1 official, I neet have a ICS kernel or JB kernel?
Click to expand...
Click to collapse
I did it with ICS Kernel, and Safestrap 3.11 on Slot-1-2GB. Worked as expected.
fredamsouza said:
I did it with ICS Kernel, and Safestrap 3.11 on Slot-1-2GB. Worked as expected.
Click to expand...
Click to collapse
Running this with the 20th March nightly on SS3.11. Wondering if anyone has been successful getting it working under BMM or if anyone has even tried with CWM? Happy it works under SS but kind of perfer the way BMM opperates and would like to give it a go... any thoughts ??
Many thanks,
:fingers-crossed:
AW: CyanogenMod 10.1 becomes Officially Nightly
Should be working I know many people who are using bmm
Here is one example:
http://forum.xda-developers.com/showthread.php?p=39392901
Sent from my XT910 using xda app-developers app
philharmonick said:
Running this with the 20th March nightly on SS3.11. Wondering if anyone has been successful getting it working under BMM or if anyone has even tried with CWM? Happy it works under SS but kind of perfer the way BMM opperates and would like to give it a go... any thoughts ??
Click to expand...
Click to collapse
Well, I'm using it at the moment, so the current kexec official builds definitely work with BMM
JFYI, the kexec official builds also work after performing the OTA JB EU update. Just removed SS3.11 saved root with OTA Root Keeper, Flashed (held breath) booted all good.. renabled root, reinstalled SS.. booted into recovery, selected by CM10.1, wiped cache and dalvic (a few times each for good measure) rebooted and away she goes... now I've got 4.1.2 Stock and CM10.1 4.2.2 under SS. Happy Days!
working fine with bmm.there are some issues.but it is good enough for daily use.:good:
i have a couple of days looking around for an answer and nothing...
i updates to [Leaked-Ota][Cdma][4.1.2] Jelly Bean 98.72.8 (12/27/12) an obtained root
then someone told me to to just install safestrap to install custom jb roms ...
so i installed safestrap 3.05 and boom.. cant boot.. flashing roms wont work..
all i can do is get back into safestrap 3.05 where i cant be sure of the charge because it always show something different//
btw i think i have ICS stock rom backed up becaused i followed hrishi21007 tutorial on youtube
i will donate to whoever helps me restore the phone and gets me on track to flashing jb roms...
I'll apprecieate any comments. thank you
antmiu2 said:
i have a couple of days looking around for an answer and nothing...
i updates to [Leaked-Ota][Cdma][4.1.2] Jelly Bean 98.72.8 (12/27/12) an obtained root
then someone told me to to just install safestrap to install custom jb roms ...
so i installed safestrap 3.05 and boom.. cant boot.. flashing roms wont work..
all i can do is get back into safestrap 3.05 where i cant be sure of the charge because it always show something different//
btw i think i have ICS stock rom backed up becaused i followed hrishi21007 tutorial on youtube
i will donate to whoever helps me restore the phone and gets me on track to flashing jb roms...
I'll apprecieate any comments. thank you
Click to expand...
Click to collapse
If you installed the OTA update, you are now on a JB Kernel. That means your ICS backup is useless, since the razr has a locked bootloader.
It also means that any custom ROMs you install need to be built off the JB Kernel. The JB ROMs that were here before the OTA were built around the existing ICS kernel cause, again locked bootloader.
Are the ROMs you are trying to install made for the JB kernel? If not, they wouldn't boot, they are made for the ICS kernel
Draxin said:
If you installed the OTA update, you are now on a JB Kernel. That means your ICS backup is useless, since the razr has a locked bootloader.
It also means that any custom ROMs you install need to be built off the JB Kernel. The JB ROMs that were here before the OTA were built around the existing ICS kernel cause, again locked bootloader.
Are the ROMs you are trying to install made for the JB kernel? If not, they wouldn't boot, they are made for the ICS kernel
Click to expand...
Click to collapse
i guess they are built for the jb kernel and i get then from this forum:
http://www.droidrzr.com/index.php/forum/154-droid-razr-roms-for-the-ice-cream-sandwich-kernel-xt912/
did i get it right??
antmiu2 said:
i guess they are built for the jb kernel and i get then from this forum:
http://www.droidrzr.com/index.php/forum/154-droid-razr-roms-for-the-ice-cream-sandwich-kernel-xt912/
did i get it right??
Click to expand...
Click to collapse
If those are the ROM's that you are installing then, they are the wrong ones, and that is your problem. If you look at the top they say they are for the Ice cream sandwich (ICS) kernel. You will need ones for the JellyBean(JB) kernel if you installed the OTA update.
Draxin said:
If those are the ROM's that you are installing then, they are the wrong ones, and that is your problem. If you look at the top they say they are for the Ice cream sandwich (ICS) kernel. You will need ones for the JellyBean(JB) kernel if you installed the OTA update.
Click to expand...
Click to collapse
oops -_- where can i find JB kernel Roms? i need to fix this asap
antmiu2 said:
oops -_- where can i find JB kernel Roms? i need to fix this asap
Click to expand...
Click to collapse
http://www.droidrzr.com/index.php/forum/156-droid-razr-roms-for-the-jelly-bean-kernel-xt912/
Make sure you read the OP and that you match any/all requirements.
Draxin said:
http://www.droidrzr.com/index.php/forum/156-droid-razr-roms-for-the-jelly-bean-kernel-xt912/
Make sure you read the OP and that you match any/all requirements.
Click to expand...
Click to collapse
umm those are the roms that i tried ... i tried 3 of them and not boot... i think its because my version of safestrap.. most of them require 3.11 so what can i do now?
antmiu2 said:
umm those are the roms that i tried ... i tried 3 of them and not boot... i think its because my version of safestrap.. most of them require 3.11 so what can i do now?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1391900
Then you upgrade to 3.11
Draxin said:
http://forum.xda-developers.com/showthread.php?t=1391900
Then you upgrade to 3.11
Click to expand...
Click to collapse
can i updrade from safestrap itself?
because im unable to boot
antmiu2 said:
can i updrade from safestrap itself?
because im unable to boot
Click to expand...
Click to collapse
Yeah crap, I forgot it is a APK
http://www.droidrzr.com/index.php/topic/8771-romrazrcdma-flyingjelly-by-teamlitespeed/#
Have you tried this ROM? Seems to only need a v3 safestrap
Draxin said:
Yeah crap, I forgot it is a APK
http://www.droidrzr.com/index.php/topic/8771-romrazrcdma-flyingjelly-by-teamlitespeed/#
Have you tried this ROM? Seems to only need a v3 safestrap
Click to expand...
Click to collapse
just tried it with no luck,, wont get past safestrap
So right now I'm running Task650s AOKP with Siyah Kernel, but an old version, thats still Android 4.0.4. In addition, I only have CWM 5. A lot of the KK ROM threads say that CWM 6 is required (and some JB ones imply the same thing, or tha I need JB bootloaders), but the one I want to flash (PACMan) doesn't have such a warning, but I'm still a bit apprehensive. Will I be fine if I just wipe, flash PACMan + GApps and reboot? Or is there an intermediary step I need like flashing a new kernel, and if so which one do I need?
Thanks guys
SupremeOverlord777 said:
So right now I'm running Task650s AOKP with Siyah Kernel, but an old version, thats still Android 4.0.4. In addition, I only have CWM 5. A lot of the KK ROM threads say that CWM 6 is required (and some JB ones imply the same thing, or tha I need JB bootloaders), but the one I want to flash (PACMan) doesn't have such a warning, but I'm still a bit apprehensive. Will I be fine if I just wipe, flash PACMan + GApps and reboot? Or is there an intermediary step I need like flashing a new kernel, and if so which one do I need?
Thanks guys
Click to expand...
Click to collapse
Well pacman isn't based on kitkat so I think you're good to go, the newest nightlies for that are still based on jellybean right? Or has it changed? I haven't downloaded one in a like two weeks.
SupremeOverlord777 said:
Will I be fine if I just wipe, flash PACMan + GApps and reboot?
Click to expand...
Click to collapse
Yes, you will be fine, as long as you install a JB kernel first (either STI or AJK 4.9 AOSP). I would suggest you install Milestone 1 (the download link is labeled PAC Release), instead of the nightly. Nightlies have a reputation for being finicky at times, so if you want stability you'd be better off sticking with known stable releases.
And don't forget to flash the gapps either, or you'll run into other problems.
SteveMurphy said:
Yes, you will be fine, as long as you install a JB kernel first (either STI or AJK 4.9 AOSP). I would suggest you install Milestone 1 (the download link is labeled PAC Release), instead of the nightly. Nightlies have a reputation for being finicky at times, so if you want stability you'd be better off sticking with known stable releases.
And don't forget to flash the gapps either, or you'll run into other problems.
Click to expand...
Click to collapse
Alright, sounds great. Thanks for the help, I'm downloading now.