Ok, I am really confused. I have a Dell Streak 5 that has been carrier unlocked with the unlock code from Dell. I got that far.
However, I am going crazy trying to figure out how to root and get a custom recovery and ROM on this phone. There are 50 how to's and tutorials and they all have a different process and dead links.
I am not a noob when it comes to rooting. Have been doing it for a while. I am just confused because the Streak is different from HTC and Samsung.
Here is what I understand so far: Sorry for the repeated thread, but with dead links, it is making it really confusing for me.
1. I need to install the drivers. Where are the drivers? Every link I am finding is dead.
2. I need a custom recovery I have downloaded Team Win Recovery Project 2.3.
3. I need to install the recovery with Fastboot? How do I install fastboot?
4. From the Recovery, I need to install superuser.zip.
5. After Superuser is installed, I am rooted.
I will find the drivers and put it on my Box account,and give a link. . . . . I have a superuser.zip. . . . You just put it on the sd card,then with fastboot put streakmod on to install .zip. . . . Then you install romsbthat way too. Im on windows 7...i just went into windows explorer and made a folder on the C drive,called streak. . . . I put all my files in here. . . . Even made folders inside for stock rom,and custom roms. Qdl tool,fastboot
posted from my Pimped out Dell
you can download the superuser.zip from here with your phone,it will be on your sd card(root folder)
Superuser.zip
https://www.box.com/s/j4h9jylsss4p53ze5j6o
put all these two folder in a folder you name on your C drive....then you run the drivers,after that you should not have streak plugged in to pc,hold power and camera button down till white screen...then hit "fastboot"....wait a few seconds before you plug usb cable into pc,now plug your streak's usb cord into pc....if you installed the drivers right....it should say fastboot mode on your streak now.
now open the folder you made,and put all these files in,on your C:\ drive,now click on "Multi-Flasher"....then "multi-flasher.bat (windows batch file)...then go throught the steps in the CMD window to install whatever recovery or baseband you want,which now is custom/Streakmod
now after you fastboot the streakmod recovery,then it will say reboot,in that same CMD window,do it...but make sure you hold both volume buttons down on that "first" reboot(dont let it boot up normally,or youll have to start over) .now when you boot up,youll be in the stock recovery....but hit the second number,install from sd card,and hit camera button....it should go to the streakmod recovery(the Blue letters)
.....now you can navigate to install from .zip , and install the superuser file(usally in download folder)....now hit back,then hit reboot.....you should be rooted now.I updated my busybox app after this.
tell me if you got it to go into fastboot
Streakflash folder -QDL Tool/drivers/fastboot
https://www.box.com/s/mlxx60jwhwzp8hp61lzn
Multi-Flasher - BaseBand/Recoveries-including-Streakmod/drivers
https://www.box.com/s/zn05hian4dkdc6laykcg
Worked great thanks
Sent from my Dell Streak using xda app-developers app
Glad to help
Sent from my Dell Streak using xda app-developers app
Related
Recently I tried to flash a custom recovery img. file to my Dell Streak , with Multirecovery Flasher . However , I pressed " any key to go on " for the img. file selected , my pc showed " cannot load c:/ " and then my Dell reboot from fastboot mode but nothing flashed . Can anyone to tell me what step I missed ?. Thanks
Nicolas .
nicolas russell said:
Recently I tried to flash a custom recovery img. file to my Dell Streak , with Multirecovery Flasher . However , I pressed " any key to go on " for the img. file selected , my pc showed " cannot load c:/ " and then my Dell reboot from fastboot mode but nothing flashed . Can anyone to tell me what step I missed ?. Thanks
Nicolas .
Click to expand...
Click to collapse
in my personal opinion I would not use it. I would send the commands to flash files manually using fastboot. In either case it looks like you haven't properly extracted the files to where you are flashing from
Actually Cdzo I used it quite often, without problems. MRF is nothing more than a batch file that eliminates typing in the fastboot commands one by one. However its big selling point was that it included the recoveries as well as fastboot in the download.
@OP: Do you have spaces in the directory name and is the directory on the root of C: ?
cdzo72 said:
in my personal opinion I would not use it. I would send the commands to.flash files manually using Detroit. In either case it looks like you haven't properly extracted the files to where you are flashing from
Click to expand...
Click to collapse
Thank you for your comment .
Nicholas, you never answered my question regarding your setup. Is it on the root of your C: drive and are there any spaces in the folder name? The root of the drive is simply to find it easier, but I believe MRF balks when there are spaces in the folder names.
Actually , I had not have time to try again , simce I have seen your suggestion . However , I will tell you the outcome . Thanks ！
Thank you so much . Since I had seen your suggestion , I have made the Flasher worked and flashed custom rom to my streak 5 today .
Hit the thanks button on my post if it was helpful.
OK, I tried installing this rom http://forum.xda-developers.com/showthread.php?t=1737862, but I skipped step 0, as I had flashed my phone with that kernel a couple days ago when I rooted my phone, the rest of the steps I did all of them, all the cleans and wipes, but smth obviously went wrong, and my phone won't boot staying at the sony logo. I saw some other threads here with the same problem, but I couldn't find a solution. If anyone has a solution that will work at 100%, I'd appreciate it. My phone is not recognized by PC Companion so I Can't do anything there. I can't boot into cwm either, I can only use flashtool to flash my phone with a kernel, and I can't use fastboot mode as my device is not recognized in flashboot either.
use SEUS and repair your phone. (when it ask you have the latest version, just install anyways)
Read.. read.. read.. same posts.. same questions.. but different people..
Xda is just not to post your questions.. its there to learn.. bro search.. there is answer to this to..
Sent from my Neo V using xda premium
Do a full wipe n reinstall the rom
Bro
Gl
Okay. So it is possible to Flash a ftf file o your phone. And Fastboot mode is used to Flash kernels, While Flashmode is used to flash ftf files.
Thing to do is,
1.Get a ftf file ( better if prerooted )
2. Flash ftf to you phone using flashtool. (flashmode)
3. Then Flash Pureness With all steps followed strictly.
Or
1. Get ftf which is not pre rooted.
2. Flash ftf on you phone.
3. Root your phone again and install CWM. or Flash Custom kernel which comes with CWM using Flashtool (fastboot mode) and flash superuser.zip via CWM to root. ....// Both methods are to root you phone.
4. Install Pureness following each instructions.
Dont worry!
Even I faced the same problem as yours and I was flashing the same ROM. What I did was in CWM I wiped and formatted everything as per the steps and when I was doing install .zip file from SD card it was giving me error something like "BAD" Error, the problem was that I didnt copy the ROM .zip file properly to my memory card.
So do one think first download the official 4.0.4. ICS ".ftf" file of your device from here-
http://forum.xda-developers.com/showthread.php?t=1678690
(As per your device 4.1.b.0.431 OR 4.1.B.0.587) it must be around 200 - 300mb.
Then copy that .ftf file in C:\Flashtool\firmwares (Make sure there is no other file present in "firmwares" folder, if there then delete it.)
(Hope you have installed Flashtool. If not then download & install it from here-
http://androxyde.github.com/index.html?1357230558000)
Then open "Flashtool", press "Flash" button and select "Flashmode" press "Ok" then again press "Ok"
wait for few seconds while its preparing.
Then a new window will Open and follow the Instructions like- unplug device, power off, press and hold back button and connect it to PC
This will install the stock ICS on your phone and will go ahead of that sony logo where you are stuck. :good:
Thats It. Your Done!!
axel_foley said:
Even I faced the same problem as yours and I was flashing the same ROM. What I did was in CWM I wiped and formatted everything as per the steps and when I was doing install .zip file from SD card it was giving me error something like "BAD" Error, the problem was that I didnt copy the ROM .zip file properly to my memory card.
So do one think first download the official 4.0.4. ICS ".ftf" file of your device from here-
http://forum.xda-developers.com/showthread.php?t=1678690
(As per your device 4.1.b.0.431 OR 4.1.B.0.587) it must be around 200 - 300mb.
Then copy that .ftf file in C:\Flashtool\firmwares (Make sure there is no other file present in "firmwares" folder, if there then delete it.)
(Hope you have installed Flashtool. If not then download & install it from here-
http://androxyde.github.com/index.html?1357230558000)
Then open "Flashtool", press "Flash" button and select "Flashmode" press "Ok" then again press "Ok"
wait for few seconds while its preparing.
Then a new window will Open and follow the Instructions like- unplug device, power off, press and hold back button and connect it to PC
This will install the stock ICS on your phone and will go ahead of that sony logo where you are stuck. :good:
Thats It. Your Done!!
Click to expand...
Click to collapse
Thanks man, that's what I was looking for, the stock ICS for my phone. Did that, re rooted my phone and this time things went fine, I managed to install pureness, even though I didn't do it from cwm directly, but from a program called x-parts (which seems to install cwm) since cwm itself would say no recovery for your phone or something, once again thanks. Also, that method with SEUS works as well, so thanks to that other guy, too. And to the guy saying search, I searched, read my OP, and I tried different stuff before asking here for like 4-5 hours, but I just panicked into thinking I ruined my phone so I came and started my own thread, since that's what the guy in the 'welcome noob' video said, but I guess people aren't allowed even to ask around here.
I never had this kind of problem, but try these following steps , may be this will help you:
1. Reboot your phone and hold back key : this will help you to set your cellphone in fastboot mode
2.Download android sdk from here
http://developer.android.com/sdk/index.html (chose the zip file)
after download extract the file and rename it to androidsdk (you must have java)
put the folder (androidsdk) on drive c
3. Then download recoveryNeo.img from here (on the first post)
http://forum.xda-developers.com/show....php?t=1183465
after you put the file recoveryNeo.img on androidsdk /tools
4. Connect your phone to your PC
5.now from your PC start choose run and type cmd then ok
copy and paste these orders (press enter after evry order)
cd/
cd/androidsdk/tools
fastboot devices (you must see the SN of your device)
fastboot boot recoveryNeo.img
after finish
fastboot reboot
By following above steps you can easily get into CWM Mode without pressing volume keys..Try them once , i hope that will help you
abhirocks said:
I never had this kind of problem, but try these following steps , may be this will help you:
1. Reboot your phone and hold back key : this will help you to set your cellphone in fastboot mode
2.Download android sdk from here
http://developer.android.com/sdk/index.html (chose the zip file)
after download extract the file and rename it to androidsdk (you must have java)
put the folder (androidsdk) on drive c
3. Then download recoveryNeo.img from here (on the first post)
http://forum.xda-developers.com/show....php?t=1183465
after you put the file recoveryNeo.img on androidsdk /tools
4. Connect your phone to your PC
5.now from your PC start choose run and type cmd then ok
copy and paste these orders (press enter after evry order)
cd/
cd/androidsdk/tools
fastboot devices (you must see the SN of your device)
fastboot boot recoveryNeo.img
after finish
fastboot reboot
By following above steps you can easily get into CWM Mode without pressing volume keys..Try them once , i hope that will help you
Click to expand...
Click to collapse
As I mentioned in my previous post, I managed to fix it, but thank you, I appreciate it, and will keep this method in mind for future references, in case I or anyone I know screws things up
Flash 4.1.B.0.587.ftf using flashtool
or
1.Factory reset in cwm
2.wipe cache partition
3.wipe dalvik cache
4.Format /system (in mounts and storage)
5.Format /data
6.Format /cache
7.Install XXX.zip (XXX=the rom name)
8.Install patch for your phone model (if there are)
9.Reboot
U seemed to take things wrongly bro.. see whatever solutions people have provided u is from xda threads only right? Soo that means if u read u will get it.. its not that we dont want to help.. the point is the help is already available.. its just that u have to search.. thats all.. bcz mny people have this doubt..
evry person rooting his phone n doing this stuff first tym has this doubt.. n helps are already provided.. dont misunderstand people and blame that u are not allowed to ask questions.. chill and understand..
Sent from my Neo V using xda premium
abhirocks said:
I never had this kind of problem, but try these following steps , may be this will help you:
1. Reboot your phone and hold back key : this will help you to set your cellphone in fastboot mode
2.Download android sdk from here
http://developer.android.com/sdk/index.html (chose the zip file)
after download extract the file and rename it to androidsdk (you must have java)
put the folder (androidsdk) on drive c
3. Then download recoveryNeo.img from here (on the first post)
http://forum.xda-developers.com/show....php?t=1183465
after you put the file recoveryNeo.img on androidsdk /tools
4. Connect your phone to your PC
5.now from your PC start choose run and type cmd then ok
copy and paste these orders (press enter after evry order)
cd/
cd/androidsdk/tools
fastboot devices (you must see the SN of your device)
fastboot boot recoveryNeo.img
after finish
fastboot reboot
By following above steps you can easily get into CWM Mode without pressing volume keys..Try them once , i hope that will help you
Click to expand...
Click to collapse
my neo v stuck at sony logo..
---------- Post added at 03:09 AM ---------- Previous post was at 03:02 AM ----------
Legdotus said:
OK, I tried installing this rom http://forum.xda-developers.com/showthread.php?t=1737862, but I skipped step 0, as I had flashed my phone with that kernel a couple days ago when I rooted my phone, the rest of the steps I did all of them, all the cleans and wipes, but smth obviously went wrong, and my phone won't boot staying at the sony logo. I saw some other threads here with the same problem, but I couldn't find a solution. If anyone has a solution that will work at 100%, I'd appreciate it. My phone is not recognized by PC Companion so I Can't do anything there. I can't boot into cwm either, I can only use flashtool to flash my phone with a kernel, and I can't use fastboot mode as my device is not recognized in flashboot either.
Click to expand...
Click to collapse
same problem for me..help...NEO V
---------- Post added at 03:36 AM ---------- Previous post was at 03:09 AM ----------
Legdotus said:
OK, I tried installing this rom http://forum.xda-developers.com/showthread.php?t=1737862, but I skipped step 0, as I had flashed my phone with that kernel a couple days ago when I rooted my phone, the rest of the steps I did all of them, all the cleans and wipes, but smth obviously went wrong, and my phone won't boot staying at the sony logo. I saw some other threads here with the same problem, but I couldn't find a solution. If anyone has a solution that will work at 100%, I'd appreciate it. My phone is not recognized by PC Companion so I Can't do anything there. I can't boot into cwm either, I can only use flashtool to flash my phone with a kernel, and I can't use fastboot mode as my device is not recognized in flashboot either.
Click to expand...
Click to collapse
same for my neo v..help
fixed
axel_foley said:
Even I faced the same problem as yours and I was flashing the same ROM. What I did was in CWM I wiped and formatted everything as per the steps and when I was doing install .zip file from SD card it was giving me error something like "BAD" Error, the problem was that I didnt copy the ROM .zip file properly to my memory card.
So do one think first download the official 4.0.4. ICS ".ftf" file of your device from here-
http://forum.xda-developers.com/showthread.php?t=1678690
(As per your device 4.1.b.0.431 OR 4.1.B.0.587) it must be around 200 - 300mb.
Then copy that .ftf file in C:\Flashtool\firmwares (Make sure there is no other file present in "firmwares" folder, if there then delete it.)
(Hope you have installed Flashtool. If not then download & install it from here-
http://androxyde.github.com/index.html?1357230558000)
Then open "Flashtool", press "Flash" button and select "Flashmode" press "Ok" then again press "Ok"
wait for few seconds while its preparing.
Then a new window will Open and follow the Instructions like- unplug device, power off, press and hold back button and connect it to PC
This will install the stock ICS on your phone and will go ahead of that sony logo where you are stuck. :good:
Thats It. Your Done!!
Click to expand...
Click to collapse
thanx a lot
Please Guide...!!!
vishal_android freak said:
Read.. read.. read.. same posts.. same questions.. but different people..
Xda is just not to post your questions.. its there to learn.. bro search.. there is answer to this to..
Sent from my Neo V using xda premium
Click to expand...
Click to collapse
May be new user....doing experiment....Please guide him!!!
dvrp said:
May be new user....doing experiment....Please guide him!!!
Click to expand...
Click to collapse
Already quite a few guides and one of the most noob friendly guides are available in this Neo forum and we are lucky to have it
Why not make use of their time and effort?rather than duplicating a post and cluttering up the forum!
The threads /guides are noob friendly
Creating a new thread without searching /without checking for a thread having similar title is not appreciated here!
I get your point and also know you didn't ask the question but just wrote this to clarify things incase you weren't aware!
Sent from my Xperia Neo V using xda premium
same problum
i have rooted my neo v fewdays ago.everything went fine and i installed a custom rom(revolution icshd) based on stock kernel that went fine too but after few days when rebooting my phone got stuck on sony logo. i tried flashing ftf file but it didnt helped.cant go into fastboot mode either.My usb debugging mode is off plzzz helpppppp
Region
axel_foley said:
So do one think first download the official 4.0.4. ICS ".ftf" file of your device from here-
http://forum.xda-developers.com/showthread.php?t=1678690
(As per your device 4.1.b.0.431 OR 4.1.B.0.587) it must be around 200 - 300mb.
Click to expand...
Click to collapse
Does region matter? I have downloaded: MT11i 4.1.B.0.587 NCB, Nordic, CDF-1255-1755, SI-1254-9263.
Gaks said:
Does region matter? I have downloaded: MT11i 4.1.B.0.587 NCB, Nordic, CDF-1255-1755, SI-1254-9263.
Click to expand...
Click to collapse
Nope it doesn't
Just bloatware differs
Sent from my MT11i using xda premium
Thx thx thx
axel_foley said:
Even I faced the same problem as yours and I was flashing the same ROM. What I did was in CWM I wiped and formatted everything as per the steps and when I was doing install .zip file from SD card it was giving me error something like "BAD" Error, the problem was that I didnt copy the ROM .zip file properly to my memory card.
So do one think first download the official 4.0.4. ICS ".ftf" file of your device from here-
http://forum.xda-developers.com/showthread.php?t=1678690
(As per your device 4.1.b.0.431 OR 4.1.B.0.587) it must be around 200 - 300mb.
Then copy that .ftf file in C:\Flashtool\firmwares (Make sure there is no other file present in "firmwares" folder, if there then delete it.)
(Hope you have installed Flashtool. If not then download & install it from here-
http://androxyde.github.com/index.html?1357230558000)
Then open "Flashtool", press "Flash" button and select "Flashmode" press "Ok" then again press "Ok"
wait for few seconds while its preparing.
Then a new window will Open and follow the Instructions like- unplug device, power off, press and hold back button and connect it to PC
This will install the stock ICS on your phone and will go ahead of that sony logo where you are stuck. :good:
Thats It. Your Done!!
Click to expand...
Click to collapse
Man a mill thx! I thought that I had ruined my phone. Flashtool worked for me. Thx again!
So a big thanks for that! Mine was stuck on Sony logo, I thought I might be facing my first serious bricking disaster, was keeping quite calm and then came across your post...Yeah! So they're right when they say 'read, read, read..'
Thanks again for such a clear post...
Here We have the Root And CWM for Nexus 10 On Android 4.2.2!
Step 1 - Download Android SDK from the Android Developers website and install with USB drivers. See: How to Set Up Android SDK (Fastboot / ADB) on Windows.
Step 2 - Enable USB Debugging mode in your Nexus 10 tablet.
Step 3 - Download Fastboot and extract it in android-sdk-windowsplatform-tools directory. Create directory if not already there.
NOTE: Skip Steps 1, 2, 3 if you already have them.
Step 4 - Download SuperSU v1.04 (UPDATE-SuperSU-v1.04.zip) and copy it to your sdcard on your Nexus 10 tablet.
Step 5 - Make sure you have backup your data as it will be removed. Then switch OFF your Nexus 10.
Step 6 - Download recovery-clockwork-touch-6.0.2.3-manta.img and copy/paste it in the android-sdk-windowsplatform-tools directory.
Step 7 - Now go into Fastboot Mode on Nexus 10. How? Press Volume Down + UP + Power key for a few seconds till you see some text on the screen.
Step 8 - Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click > Open Command Prompt).
Step 9 - Type in the following command and press Enter.
fastboot flash recovery recovery-clockwork-touch-6.0.2.3-manta.img
Click to expand...
Click to collapse
Step 10 - Once completed, choose RECOVERY MODE from the Fastboot menu and enter Recovery Mode.
Step 11 - Then scroll down to “flash zip from SD card” and press the Power button to select it.
Step 12 - Press the Power button again and select “choose zip from sdcard”.
Step 13 - Now using your volume keys, navigate to the UPDATE-SuperSU-v1.04.zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Step 14 - After the installation completes, go to “+++++Go Back” and reboot the phone by selecting “reboot system now” from the recovery menu. Then Choose yes flash recovery back (this will make CWM your permanent recovery mode)
That’s it. Your Nexus 10 is now rooted on Android 4.2.2 JDQ39 software version of Jelly Bean and even has a custom CWM recovery installed. Check for the SuperSU app in your apps list to verify.
Root and CWM for Nexus 7
Root and CWM for Nexus 4
Reserved...
Thanks udi, but could you also post how to do it on stock rom with stock recovery? Much appreciated! I keep wathing your youtube videos lol :good:
lKBZl said:
Thanks udi, but could you also post how to do it on stock rom with stock recovery? Much appreciated! I keep wathing your youtube videos lol :good:
Click to expand...
Click to collapse
what do u want root or recovery??
AW: [How-to]Root Android 4.2.2 And Install CWM
lKBZl said:
Thanks udi, but could you also post how to do it on stock rom with stock recovery? Much appreciated! I keep wathing your youtube videos lol :good:
Click to expand...
Click to collapse
I think you have to unlock your device first. Then you can easily install your custom recovery
how do I install TWRP now?
never mind was trying to flash a .TAR file this wayyy... figured it out. need a .img
Use the nexus 10 toolkit
Side Load via adb,
then re run the everything script in toolkit.
Worked like a charm for me, however, I did have to reflash back to my first backup, to be on stock 4.2.1 with stock kernel
mrdunlop said:
Use the nexus 10 toolkit
Side Load via adb,
then re run the everything script in toolkit.
Worked like a charm for me, however, I did have to reflash back to my first backup, to be on stock 4.2.1 with stock kernel
Click to expand...
Click to collapse
did it work for 4.2.2 ? i was rooted with 4.2.1 but the OTA screw it up.. i have to recover to factory .. then OTA ｔｏ ４．２．２
ｃｏｕｌｄ ｙｏｕ ｐｌｅａｓｅ ｂｅ ｍｏｒｅ ｓｐｅｃｉｆｉｃ ？
followed this method last night and got my tablet rooted with TWRP's recovery!
epunk said:
followed this method last night and got my tablet rooted with TWRP's recovery!
Click to expand...
Click to collapse
Glad that It's working!
Download Fastboot?
I cant download Download Fastboot... I have been denied access??? little help over here please I wanna root my device on 4.2.2... Thanks in advance!
just did the same thing with my n7, worked out easily on my mac !
#1 thanks a lot dude
Mr_Jay_jay said:
I cant download Download Fastboot... I have been denied access??? little help over here please I wanna root my device on 4.2.2... Thanks in advance!
Click to expand...
Click to collapse
http://www.mediafire.com/?lt8ghch95u5abgo fastboot files!
hope this one works :fingers-crossed:
I followed your method and got:
1.- Clockworkmod E:can't mount /sdcard/
2.- System stuck at Nexus X logo
What do I do now?
[update]
1.- Got factory image: https://developers.google.com/android/nexus/images#mantaray
2.- Ran "flash-all.bat" from the tgz
3.- Flashed recovery-twrp-2.4.2.0-manta.img
4.- TWRP asked if I wanted to install SU, I said yes
5.- Happy days.
Sorry if this has already been asked and I'm not understanding it.
I bought my mom a Nexus10 and it's missing some Indian fonts on it. I saw I need to flash on a fontpack to add them.
The tablet is totally stock, on 4.2.2..
Do I need to unlock the bootloader first (which wipes all the data) and then do the steps from the 1st post?
This whole process is not working for me. I am in windows 8 and it just doesnt let me install sdk nor even ask me to install drivers. Can you suggest what is the possible way out? I am unable to move ahead due to these issues :/
Root failed.
I followed all instructions (I have successfully rooted a number of smartphones and the Nexus 7 before this). The end result is that the Nexus 10 is unlocked, but hangs on bootup with just the X showing. I can't go into Recovery mode (I just get the Android lying on his back with an exclamation point showing and eventually it tries a normal boot - as far as the X).
I can't try Restart Bootloader as this, too, leads to just the X and hangs. I have reset the tab (power + down volume) and also have tried to reconnect the tab to the PC, which now does not recognize it, putting fastboot.exe and adb.exe out of reach. I think something might have gone wrong installing CWM, though it did boot up a couple of times after that with a couple of errors that passed by too fast to copy - before it started to hang. I never got a chance to put superuser on it as Recovery mode is out of reach. I tried a master reset the last time I got to Recovery Mode, but got several minor errors and now seem not to have ANY bootloader working. Short of sending the tab back to Google to have them restore a 'cherry' Android 4.2.2 (for a sum), I'm lost as to where to go next.
Any ideas?
s
paano po mag rooted ng myphone Rio fun
My recovery is lost when I did this!!!
I did this with adb....almost same step......now when try to go to recovery mode.....just logo......! I have to take battery out! so that I could boot into android.......when I accidently type -w which was for wipe,,,,,,,wiped thw whole phone..... now its just white screen when i boot into android......cant install new rom because recovery is lost.......what should I do now? help me please!
how to root s3mini 8200
Hi all, i made a terrible mistake and installed cyanogen 10 for nexus 7 on my protab2xxl tablet.
Is there any way to save my tablet?
Cant use touchscreen so im using mouse/keyboard, but i tried 100 ways to fix it and cant do it.
Recovery mode always goes to Android 3e and not CWM, so im getting "signature verification failed" error
and i cant install the correct cyanogen mod.
Also tried with nexus tool without any luck.
If anybody can help, it would be much appreciated. I will PayPal $10 if somebody helps me to fix this tablet.
OK....
Try this method it will help you
1)Download ADT (android download tool)
2)Download and install all usb drivers of ur device.
3)Boot into download mode .
4)connect usb.
5)DONT DO ANYTHING ELSE. STATED.
IN ERASE TICK
BOOT
SYSTEM
USERDATA
RECOVERY.
Click begain
Then download a compitable recovery cmw of ur device
Then open adt and in ARM11
tick recovery and browse recovery.img click begain.
It will flash the recovery
now reboot to recovery and flash any rom of ur choice.
Hit thanks....
yash.pranjale86 said:
OK....
Try this method it will help you
1)Download ADT (android download tool)
2)Download and install all usb drivers of ur device.
3)Boot into download mode .
4)connect usb.
5)DONT DO ANYTHING ELSE. STATED.
IN ERASE TICK
BOOT
SYSTEM
USERDATA
RECOVERY.
Click begain
Then download a compitable recovery cmw of ur device
Then open adt and in ARM11
tick recovery and browse recovery.img click begain.
It will flash the recovery
now reboot to recovery and flash any rom of ur choice.
Hit thanks....
Click to expand...
Click to collapse
i have no idea how to do steps 2 and 3
do i need now drivers for nexus 7 or protab2xxl?
how to install them? i tried with live suite but its not recognizing the tablet.
how to boot into download mode?
Go to official site of ur device and download usb drivers of ur device or just google it
These are .exe files install them normally on ur PC
Just search google about the key combination to boot in download mode or search on xda
Or try booting in bootloader and then follow steps below
Sent from my A60 using xda app-developers app
yash.pranjale86 said:
Go to official site of ur device and download usb drivers of ur device or just google it
These are .exe files install them normally on ur PC
Just search google about the key combination to boot in download mode or search on xda
Or try booting in bootloader and then follow steps below
Sent from my A60 using xda app-developers app
Click to expand...
Click to collapse
I downloaded the drivers, but there is no exe files:
i50.tinypic.com/bi0zvd.png
If they are not setup files then they are in which format ?
Are u sure u downloaded correct drivers for correct operating system ex- exe for windows etc
U have to install it on computer with Microsoft windows os
Or follow tutorial for installing drivers on pc go the official site or search Google .
yash.pranjale86 said:
If they are not setup files then they are in which format ?
Are u sure u downloaded correct drivers for correct operating system ex- exe for windows etc
U have to install it on computer with Microsoft windows os
Or follow tutorial for installing drivers on pc go the official site or search Google .
Click to expand...
Click to collapse
I use Windows 7 64
I downloaded the lates firmware: 10 inch TAB-PROTAB2XXL(4.1)-Android 4.0-20120409.zip
Inside there are 3 folders: LiveSuite, 10 inch TAB-PROTAB2XXL(4.1)20120409, UsbDriver
In UsbDriver there are 7 files and non of them is .exe:
usbdrv.inf
usbdrv.sys
usbdrv_AMD64.sys
usbdrv_IA64.sys
usbdrvi64.cat
usbdrvx64.cat
usbdrvx86.cat
I also tried to install with "Device Manager", but when i click on UsbDriver it gives me empty folder.
Sorry i cant post image links. I dont have 10 posts yet.
Download this PDF file
It contains all the instructions
Its ur device official tutorial given by company.
Will work 100% for you
Download link
downloads.pointofview-online.com/Dr...are upgrade Mobii 10 Inch ProTab2XXL V1 3.pdf
IF THIS DOES NOT WORK JUST INSTALL THE USB DRIVERS AS GIVEN IN PDF THEN FOLLOW MY TUTORIAL ABOVE.
Hope ur problem gets solved as soon as possible.
yash.pranjale86 said:
Download this PDF file
It contains all the instructions
Its ur device official tutorial given by company.
Will work 100% for you
Download link
downloads.pointofview-online.com/Dr...are upgrade Mobii 10 Inch ProTab2XXL V1 3.pdf
IF THIS DOES NOT WORK JUST INSTALL THE USB DRIVERS AS GIVEN IN PDF THEN FOLLOW MY TUTORIAL ABOVE.
Hope ur problem gets solved as soon as possible.
Click to expand...
Click to collapse
I think im going to break the fking thing. Im on the edge of my nerves.
I manage to reset it to its original android 4.03 and touchscreen is working now, but
still getting the same "signature verification failed" error when in recovery mode 3e.
Also, tablet is not recognized by ROM Manager CWM, so booting to that recovery and
toggle between signature verification option is not an option.
I think there is no "download mode" on this tablet.
Anything else that you suggest? Im running out of options and the tablet already
received couple of punches. Not sure how long is going to last.
i guess download mode is the recovery mode? When android is on his back?
Anybody got any advice?
SuperOneClick says that my tablet is rooted, but SuperUser cant gain root access. Also i installed Titanium Backup and its same, cant gain access to the root.
What else can i try? Is this tablet lost?
Did u tried to install the USB drivers from the method given in PDF file
Use z4root to root ur tablet.
Thank You Yash for all your help. Finally managed to install Cyanogenmod.
So wow ur done ......
Sent from my A60 using xda app-developers app
Hi Everyone i'm a newbie in this field so correct me if i'm wrong with some terms...
It's really frustrating to accidentally delete 'build.prop' without backing up and having only blackscreen showing up when you reboot is annoying isn't it? Well luckily i have made some fix here it is
BUT... make sure:
1.you have your drivers correctly installed
2.you installed your Android SDK and Java SDK(Note: java sdk must be the first to be installed)
3.you installed your adbfastboot
4.you can access to recovery and download mode(research on how to execute it.)
5.most helpful if you have installed PDANet on your PC(it will help you determine if your adb is runnning)
6.you have downloaded the suitable .img clockworkmod file(needed for flashing
7.you downloaded you're stock rom/custom rom (it's up to you)
6.you have internet acess(needed for researching since i can't provide the links)
7.and especially PATIENCE!
LET's BEGIN.
1.Put your phone into download mode
2.Then wait for notifications and check if an Android Device is installed
3.You installed your fast boot now you're ready to flash your .img clockworkmode file
...3.1.Open your cmd
...3.2.CD your path for the adbfastboot
...3.3.then type 'fastboot flash recovery clockworkmod.img' (without the quotes)
4.Now that you installed your CWM put the downloaded ROM into your SDcard then mount it to your device
5.Remove then re attach the battery and proceed to recovery mode(research on how to execute your phone's recovery mode)
6.Then now you're in cwm recovery mode you may now flash a stock/custom rom
(use your volume buttons to go up and down and power button to enter)
...6.1.Clear your data
...6.2.In the menu choose 'apply update from SD card' then install from SDcard
...6.3.Toggle and locate where you have place the rom
...6.4.Choose the desired rom then enter, then the package will install wait until it finishes and go again to the main selection menu
...6.5.Reboot and there you have it you have just revived your phone
Another Method is by using adb
1.Find the build.prop that you deleted for your phone
2.Push it inside of the adb ex.(adb push<file location> [space] <remote>)
this is my first post hope i helped you...
hey....
my x-bo o2 phone..
stock on boot animation although i reset and reboot it it still stock...
because i replace a new build prop came from my old phone ...after i reboot my phone ..it wont start..
heellp plz..
I think you have to flash the firmware with odin.
Replace permission
Permission change is required for work.
saidiemenor said:
hey....
my x-bo o2 phone..
stock on boot animation although i reset and reboot it it still stock...
because i replace a new build prop came from my old phone ...after i reboot my phone ..it wont start..
heellp plz..
Click to expand...
Click to collapse